Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Physics 1
  3. ›6 Energy and Momentum of Rotating Systems
  4. ›6.2 Torque and work

AP Physics 1 · Unit 6 · Energy and Momentum of Rotating Systems

6.2 Torque and work

Explain how torque does work on a rotating object, calculate that work over an angular displacement, and relate it to energy change.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Torque does work when it turns an object
  1. 1Torque does work when it turns an object
  2. 2Work equals torque times the angle turned
  3. 3The area under a torque-angle graph is the work
  4. 4Net work changes the rotational kinetic energy
  5. 5Power is torque times angular speed
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Torque does work when it turns an object

Pushing a door open takes effort because the door turns about its hinges. The push does work only if the door actually rotates. A force that turns an object transfers energy to it.

The turning effect of a force is its torque. For a force acting at distance rrr from the axis, τ=rFsin⁡θ\tau = rF\sin\thetaτ=rFsinθ. The angle θ\thetaθ lies between the force and the line from the axis to where the force acts.

Common mistake

Torque and work share the unit N m\mathrm{N\,m}Nm, but they are different quantities. Torque is a turning effect, while work is energy transferred.

Key term

torque

A measure of a force's tendency to rotate an object about an axis, given by τ=rFsin⁡θ\tau = rF\sin\thetaτ=rFsinθ and measured in N m\mathrm{N\,m}Nm.

Part 1 done

2

Part 2 of 5: Work equals torque times the angle turned

Now that torque is defined, the next question is how much energy it transfers. A push at the rim of a wheel moves the rim along an arc. The arc length equals rrr times the angle turned, with the angle in radians.

The angle turned is the angular displacement, Δθ\Delta\thetaΔθ. Work by a force is W=FsW = FsW=Fs, with s=rΔθs = r\Delta\thetas=rΔθ. For a tangential force, this gives W=(rF)ΔθW = (rF)\Delta\thetaW=(rF)Δθ. So a constant torque along the rotation does work W=τ ΔθW = \tau\,\Delta\thetaW=τΔθ.

Worked example

Work by a constant torque

A constant torque of 12 N m turns a wheel through 3.0 rad. Calculate the work done.
  1. 1
    Use W=τ ΔθW = \tau\,\Delta\thetaW=τΔθ.
  2. 2
    Substitute: W=(12 N m)(3.0 rad)W = (12\ \mathrm{N\,m})(3.0\ \mathrm{rad})W=(12 Nm)(3.0 rad).
  3. 3
    Multiply: 12×3.0=3612\times3.0 = 3612×3.0=36. The radian has no dimensions, so N m\mathrm{N\,m}Nm becomes joules.

Answer: The work done is 36 J36\ \mathrm{J}36 J.

Key term

angular displacement

The angle through which an object rotates about an axis; it must be in radians in the work equation.

Part 2 done

Quick check

One question on the part you just read

Easy

Which expression gives the work done by a constant torque τ\tauτ acting through an angular displacement Δθ\Delta\thetaΔθ in the direction of rotation?
Show answer and explanation

Answer: A · Worked explanation

Work by a constant torque is the torque multiplied by the angle turned, which mirrors force times displacement. Dividing torque by the angle gives no energy quantity. Squaring the angle or taking its sine also has no basis in the derivation W=Fs=(rF)ΔθW = Fs = (rF)\Delta\thetaW=Fs=(rF)Δθ.
3

Part 3 of 5: The area under a torque-angle graph is the work

Real torques are not always constant. A hand tightening a bolt may push harder as the bolt resists. Then the simple product τΔθ\tau\Delta\thetaτΔθ no longer works. Plot torque against angle instead.

The area between the curve and the angle axis equals the work done. A constant torque gives a rectangle. A torque that opposes the rotation gives negative area and negative work.

Figure 1. The area under the line is the work done. Here the torque rises steadily as the object turns.

Exam tip

Convert degrees to radians before using W=τΔθW=\tau\Delta\thetaW=τΔθ. One full turn is 2π2\pi2π rad.

Part 3 done

4

Part 4 of 5: Net work changes the rotational kinetic energy

A wheel at rest speeds up when a net torque turns it. The energy it gains equals the net work done. This energy of rotation is rotational kinetic energy, K=12Iω2K = \frac{1}{2}I\omega^2K=21​Iω2, where III is the rotational inertia.

So Wnet=ΔK=12Iωf2−12Iωi2W_{\mathrm{net}} = \Delta K = \frac{1}{2}I\omega_f^2 - \frac{1}{2}I\omega_i^2Wnet​=ΔK=21​Iωf2​−21​Iωi2​. This is the work-energy theorem for rotation. It lets you find a final angular speed from the work done. The same idea works for a wheel that slows down, where the net work is negative.

Worked example

Speeding up a wheel

A wheel with I=0.50 kg m2I = 0.50\ \mathrm{kg\,m^2}I=0.50 kgm2 starts at rest. A constant net torque of 4.0 N m acts through 5.0 rad. Find the final angular speed.
  1. 1
    Work done: W=τΔθ=(4.0)(5.0)=20 JW = \tau\Delta\theta = (4.0)(5.0) = 20\ \mathrm{J}W=τΔθ=(4.0)(5.0)=20 J.
  2. 2
    The wheel starts at rest, so W=12Iω2W = \frac{1}{2}I\omega^2W=21​Iω2.
  3. 3
    Rearrange: ω2=2WI=2(20)0.50=80 rad2/s2\omega^2 = \frac{2W}{I} = \frac{2(20)}{0.50} = 80\ \mathrm{rad^2/s^2}ω2=I2W​=0.502(20)​=80 rad2/s2.
  4. 4
    Take the root: ω=80≈8.9 rad/s\omega = \sqrt{80} \approx 8.9\ \mathrm{rad/s}ω=80​≈8.9 rad/s.

Answer: The final angular speed is about 8.9 rad/s8.9\ \mathrm{rad/s}8.9 rad/s.

Key term

rotational kinetic energy

The kinetic energy of an object rotating about a fixed axis, equal to 12Iω2\frac{1}{2}I\omega^221​Iω2 and measured in joules.

Part 4 done

Quick check

One question on the part you just read

Easy

In the equation W=τ ΔθW = \tau\,\Delta\thetaW=τΔθ, which unit must be used for Δθ\Delta\thetaΔθ so that the work comes out in joules?
Show answer and explanation

Answer: A · Worked explanation

The equation follows from arc length s=rΔθs = r\Delta\thetas=rΔθ, which holds only when the angle is in radians. The radian has no dimensions, so N m\mathrm{N\,m}Nm becomes joules. Degrees are a tempting choice, but using them would give a number that is not in joules unless converted.
5

Part 5 of 5: Power is torque times angular speed

Power measures how quickly work is done. Dividing W=τΔθW = \tau\Delta\thetaW=τΔθ by the time interval gives P=τωP = \tau\omegaP=τω. Here ω\omegaω is the angular speed in rad/s\mathrm{rad/s}rad/s, and PPP is in watts.

A motor shaft that turns faster at the same torque delivers more power. A larger torque at the same speed also delivers more power. Both factors matter when a machine drives a load. A car engine, for example, delivers its power through a spinning shaft.

Worked example

Power from a shaft

A shaft applies a torque of 6.0 N m while turning at 50 rad/s. Calculate the power.
  1. 1
    Use P=τωP = \tau\omegaP=τω.
  2. 2
    Substitute: P=(6.0 N m)(50 rad/s)P = (6.0\ \mathrm{N\,m})(50\ \mathrm{rad/s})P=(6.0 Nm)(50 rad/s).
  3. 3
    Multiply: 6.0×50=3006.0\times50 = 3006.0×50=300.

Answer: The power is 300 W300\ \mathrm{W}300 W.

Note read

Check your recall[13 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Explain[2 marks]

    Explain why a force directed along the line from the axis to its point of application produces no torque.

    Show mark schemeHide mark scheme

    Model answer

    Torque is τ=rFsin⁡θ\tau = rF\sin\thetaτ=rFsinθ. When the force lies along that line, θ=0\theta = 0θ=0, so sin⁡θ=0\sin\theta = 0sinθ=0 and the torque is zero.

    • 1 mark for stating or using τ=rFsin⁡θ\tau = rF\sin\thetaτ=rFsinθ
    • 1 mark for explaining that the angle is zero so the torque is zero
  2. 2.State[2 marks]

    State the equation for the work done by a constant torque and the unit required for the angle.

    Show mark schemeHide mark scheme

    Model answer

    W=τ ΔθW = \tau\,\Delta\thetaW=τΔθ, with the angular displacement Δθ\Delta\thetaΔθ in radians.

    • 1 mark for stating W=τΔθW = \tau\Delta\thetaW=τΔθ
    • 1 mark for stating that the angle is in radians
  3. 3.Calculate[2 marks]

    Calculate the work done by a constant torque of 8.0 N m that turns a wheel through 2.5 rad.

    Show mark schemeHide mark scheme

    Model answer

    W=τΔθ=(8.0)(2.5)=20 JW = \tau\Delta\theta = (8.0)(2.5) = 20\ \mathrm{J}W=τΔθ=(8.0)(2.5)=20 J.

    • 1 mark for substituting into W=τΔθW = \tau\Delta\thetaW=τΔθ
    • 1 mark for obtaining 20 J
  4. 4.Calculate[3 marks]

    Calculate the final angular speed of a wheel with I=2.0 kg m2I = 2.0\ \mathrm{kg\,m^2}I=2.0 kgm2, starting from rest, when the net work done on it is 36 J.

    Show mark schemeHide mark scheme

    Model answer

    W=12Iω2W = \frac{1}{2}I\omega^2W=21​Iω2, so ω2=2(36)2.0=36\omega^2 = \frac{2(36)}{2.0} = 36ω2=2.02(36)​=36. Therefore ω=6.0 rad/s\omega = 6.0\ \mathrm{rad/s}ω=6.0 rad/s.

    • 1 mark for equating net work to 12Iω2\frac{1}{2}I\omega^221​Iω2
    • 1 mark for rearranging and substituting correctly
    • 1 mark for obtaining 6.0 rad/s6.0\ \mathrm{rad/s}6.0 rad/s
  5. 5.Describe[2 marks]

    Describe how to find the work done by a torque that changes as an object turns.

    Show mark schemeHide mark scheme

    Model answer

    Plot torque against angular displacement. The area under the curve is the work done, with areas below the axis counting as negative.

    • 1 mark for plotting torque against angular displacement
    • 1 mark for stating that the area under the curve equals the work
  6. 6.Calculate[2 marks]

    Calculate the power delivered by a shaft that applies a torque of 5.0 N m while turning at 40 rad/s.

    Show mark schemeHide mark scheme

    Model answer

    P=τω=(5.0)(40)=200 WP = \tau\omega = (5.0)(40) = 200\ \mathrm{W}P=τω=(5.0)(40)=200 W.

    • 1 mark for using P=τωP = \tau\omegaP=τω
    • 1 mark for obtaining 200 W

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Determine[1 mark]

A torque of 5.0 N m acts on a wheel that is jammed and does not turn at all. Determine the work done by the torque.
Show answer and explanation

Answer: A · Worked explanation

Work requires angular displacement. With Δθ=0\Delta\theta = 0Δθ=0, W=τΔθ=0W = \tau\Delta\theta = 0W=τΔθ=0. The 5.0 J option wrongly treats the torque's numerical value as energy, even though torque alone does not transfer energy without rotation.
4.

Medium·Calculate[1 mark]

Calculate the work done by a constant torque of 15 N m that turns a wheel through 4.0 rad.
Show answer and explanation

Answer: C · Worked explanation

Use W=τΔθ=(15)(4.0)=60 JW = \tau\Delta\theta = (15)(4.0) = 60\ \mathrm{J}W=τΔθ=(15)(4.0)=60 J. The 3.8 J option comes from dividing torque by angle, which is not the relationship. The 30 J option halves the result without any reason, as no triangular area is involved for a constant torque.
5.

Medium·Calculate[2 marks]

A constant torque of 2.0 N m turns a flywheel through 3.0 complete revolutions. Calculate the work done.
Show answer and explanation

Answer: B · Worked explanation

Convert revolutions to radians: 3.0×2π=18.8 rad3.0\times2\pi = 18.8\ \mathrm{rad}3.0×2π=18.8 rad. Then W=(2.0)(18.8)≈38 JW = (2.0)(18.8) \approx 38\ \mathrm{J}W=(2.0)(18.8)≈38 J. The 6.0 J option multiplies by 3.0 without converting the revolutions to radians, which is the most common slip here.
6.

Medium·Calculate[2 marks]

A torque rises steadily from 0 to 6.0 N m while a wheel turns through 2.0 rad. Calculate the work done by the torque.
Show answer and explanation

Answer: C · Worked explanation

The work is the area under the torque-angle graph, a triangle. Area =12(2.0)(6.0)=6.0 J= \frac{1}{2}(2.0)(6.0) = 6.0\ \mathrm{J}=21​(2.0)(6.0)=6.0 J. The 12 J option uses the maximum torque for the whole turn, as if the torque were constant at its final value.
7.

Medium·Calculate[2 marks]

A disk with I=0.80 kg m2I = 0.80\ \mathrm{kg\,m^2}I=0.80 kgm2 starts at rest. A net torque of 3.0 N m acts through 2.0 rad. Calculate its final angular speed.
Show answer and explanation

Answer: C · Worked explanation

Work is (3.0)(2.0)=6.0 J(3.0)(2.0) = 6.0\ \mathrm{J}(3.0)(2.0)=6.0 J. Then ω=2W/I=12/0.80=15≈3.9 rad/s\omega = \sqrt{2W/I} = \sqrt{12/0.80} = \sqrt{15} \approx 3.9\ \mathrm{rad/s}ω=2W/I​=12/0.80​=15​≈3.9 rad/s. The 2.7 option drops the factor of 2 and uses W/I\sqrt{W/I}W/I​. The 7.5 option treats W/IW/IW/I as the angular speed itself.
8.

Hard·Calculate[2 marks]

A 20 N force acts at a point 0.30 m from the axis of a wheel, at 30° to the line from the axis to that point. The wheel turns through 2.0 rad. Calculate the work done.
Show answer and explanation

Answer: B · Worked explanation

Torque is τ=rFsin⁡θ=(0.30)(20)sin⁡30°=3.0 N m\tau = rF\sin\theta = (0.30)(20)\sin30° = 3.0\ \mathrm{N\,m}τ=rFsinθ=(0.30)(20)sin30°=3.0 Nm. Then W=(3.0)(2.0)=6.0 JW = (3.0)(2.0) = 6.0\ \mathrm{J}W=(3.0)(2.0)=6.0 J. The 10 J option uses cosine instead of sine, and the 12 J option ignores the angle completely.
9.

Hard·Determine[2 marks]

A brake applies a constant torque of 10 N m opposite to the rotation of a wheel while the wheel turns through 3.0 rad. Determine the change in the wheel's rotational kinetic energy, assuming the brake is the only torque.
Show answer and explanation

Answer: A · Worked explanation

The torque opposes the rotation, so the work is negative: W=−(10)(3.0)=−30 JW = -(10)(3.0) = -30\ \mathrm{J}W=−(10)(3.0)=−30 J. By the work-energy theorem, ΔK=−30 J\Delta K = -30\ \mathrm{J}ΔK=−30 J. The +30 J option ignores the sign, and 0 J wrongly assumes a constant speed.
10.

Hard·Predict[2 marks]

A constant net torque turns a wheel from rest through an angle Δθ\Delta\thetaΔθ, giving it final angular speed ω\omegaω. The same torque now acts through 2Δθ2\Delta\theta2Δθ on the same wheel from rest. Predict the new final angular speed.
Show answer and explanation

Answer: B · Worked explanation

The work doubles, so the final kinetic energy doubles. Since K=12Iω2K = \frac{1}{2}I\omega^2K=21​Iω2, doubling KKK multiplies ω\omegaω by 2\sqrt{2}2​. The 2ω2\omega2ω option wrongly assumes angular speed is proportional to work, but kinetic energy depends on ω2\omega^2ω2.

Keep going

Next topic6.3 Angular momentum and angular impulsePrevious topic6.1 Rotational kinetic energy

More in Unit 6 · Energy and Momentum of Rotating Systems

  1. 6.1Rotational kinetic energyNotes · 9 questions
  2. 6.2Torque and workNotes · 10 questions
  3. 6.3Angular momentum and angular impulseNotes · 10 questions
  4. 6.4Conservation of angular momentumNotes · 7 questions
  5. 6.5RollingNotes · 7 questions
  6. 6.6Motion of orbiting satellitesNotes · 9 questions

All AP Physics 1 topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/5 read

  1. 1Torque does work when it turns an object
  2. 2Work equals torque times the angle turned
  3. 3The area under a torque-angle graph is the work
  4. 4Net work changes the rotational kinetic energy
  5. 5Power is torque times angular speed
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe

Work as area under a torque graph

Torque (N m)0123450246810Angular displacement (rad)
  • Torque rises with angle
  • End of the turn
  • 8 N m at 4 rad