Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Physics 1
  3. ›6 Energy and Momentum of Rotating Systems
  4. ›6.4 Conservation of angular momentum

AP Physics 1 · Unit 6 · Energy and Momentum of Rotating Systems

6.4 Conservation of angular momentum

State the law of conservation of angular momentum, solve problems where it applies, and describe real examples.

  • 4 min read
  • 5 parts
  • 7 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 7 questions
1/5Angular momentum stays fixed when no external torque acts
  1. 1Angular momentum stays fixed when no external torque acts
  2. 2Changing the mass distribution changes the spin rate
  3. 3Setting initial and final angular momentum equal solves spin problems
  4. 4Objects that join together share the total angular momentum
  5. 5Real examples show the same rule in action
  6. Check your recall
  7. Practice: 7 questions
1

Part 1 of 5: Angular momentum stays fixed when no external torque acts

Imagine a spinning top on a smooth table. Its spin barely changes until friction or a push acts on it. This hints at a pattern for isolated rotating systems.

When no outside influence turns the system, its total angular momentum stays constant. This is conservation of angular momentum. The influence that would change it is an external torque, one that comes from a force outside the system.

Common mistake

Conserved does not mean each part keeps its own spin. One part may gain angular momentum while another loses the same amount.

Key terms · tap one for its definition

conservation of angular momentum

For a system with zero net external torque about an axis, total angular momentum is constant, so Li=LfL_i = L_fLi​=Lf​.

external torque

A torque produced by a force from outside the system; internal forces cannot change the system's total angular momentum.

Part 1 done

2

Part 2 of 5: Changing the mass distribution changes the spin rate

Now consider a system that changes shape while no external torque acts. Its rotational inertia changes. Since L=IωL = I\omegaL=Iω must stay fixed, the angular speed has to change as well.

For one rotating object, Iiωi=IfωfI_i\omega_i = I_f\omega_fIi​ωi​=If​ωf​. When III decreases, ω\omegaω increases. When III increases, ω\omegaω decreases. The two change in opposite directions, and their product stays the same.

Figure 1. With angular momentum fixed, a smaller rotational inertia means a larger angular speed. The curve shows a constant L of 6.0 kg m² s⁻¹.

Exam tip

Write Li=LfL_i = L_fLi​=Lf​ first, then substitute. Check the direction of your answer: a smaller III must give a larger ω\omegaω.

Part 2 done

3

Part 3 of 5: Setting initial and final angular momentum equal solves spin problems

A figure skater spinning with arms out is a standard case. Ice friction is small, so the net external torque is nearly zero. Pulling the arms in moves mass closer to the axis and reduces III.

Worked example

Skater pulling in her arms

A skater has I=3.0 kg m2I = 3.0\ \mathrm{kg\,m^2}I=3.0 kgm2 and spins at 2.0 rad/s. She pulls in her arms, so III becomes 1.2 kg m21.2\ \mathrm{kg\,m^2}1.2 kgm2. Find her new angular speed.
  1. 1
    No external torque acts, so Iiωi=IfωfI_i\omega_i = I_f\omega_fIi​ωi​=If​ωf​.
  2. 2
    Initial: L=(3.0)(2.0)=6.0 kg m2/sL = (3.0)(2.0) = 6.0\ \mathrm{kg\,m^2/s}L=(3.0)(2.0)=6.0 kgm2/s.
  3. 3
    Final: (1.2) ωf=6.0(1.2)\,\omega_f = 6.0(1.2)ωf​=6.0.
  4. 4
    Solve: ωf=6.0/1.2=5.0 rad/s\omega_f = 6.0/1.2 = 5.0\ \mathrm{rad/s}ωf​=6.0/1.2=5.0 rad/s.
  5. 5
    Check energy: Ki=12(3.0)(2.0)2=6.0 JK_i = \frac{1}{2}(3.0)(2.0)^2 = 6.0\ \mathrm{J}Ki​=21​(3.0)(2.0)2=6.0 J and Kf=12(1.2)(5.0)2=15 JK_f = \frac{1}{2}(1.2)(5.0)^2 = 15\ \mathrm{J}Kf​=21​(1.2)(5.0)2=15 J.

Answer: Her new angular speed is 5.0 rad/s5.0\ \mathrm{rad/s}5.0 rad/s.

The kinetic energy rose in this example. Her muscles did work as they pulled the arms inward. So kinetic energy is not conserved, even though angular momentum is.

Part 3 done

4

Part 4 of 5: Objects that join together share the total angular momentum

Now suppose two rotating objects come together. A friction clutch or a sticky landing can join them. The pair then turns at one common angular speed. Think of a spinning turntable onto which a second disk is dropped.

The system is the two objects together. Forces between them are internal, so they cannot change the total. Add the angular momenta before the joining, then equate that sum to (I1+I2)ωf(I_1 + I_2)\omega_f(I1​+I2​)ωf​ afterward.

Worked example

Joining two disks

Disk 1 has I1=2.0 kg m2I_1 = 2.0\ \mathrm{kg\,m^2}I1​=2.0 kgm2 and spins at 6.0 rad/s. Disk 2 has I2=1.0 kg m2I_2 = 1.0\ \mathrm{kg\,m^2}I2​=1.0 kgm2 and is at rest on the same axis. They stick together. Find the common angular speed.
  1. 1
    Before: Li=(2.0)(6.0)+(1.0)(0)=12 kg m2/sL_i = (2.0)(6.0) + (1.0)(0) = 12\ \mathrm{kg\,m^2/s}Li​=(2.0)(6.0)+(1.0)(0)=12 kgm2/s.
  2. 2
    After: Lf=(I1+I2)ωf=(3.0)ωfL_f = (I_1 + I_2)\omega_f = (3.0)\omega_fLf​=(I1​+I2​)ωf​=(3.0)ωf​.
  3. 3
    Set Li=LfL_i = L_fLi​=Lf​: ωf=12/3.0=4.0 rad/s\omega_f = 12/3.0 = 4.0\ \mathrm{rad/s}ωf​=12/3.0=4.0 rad/s.

Answer: The common angular speed is 4.0 rad/s4.0\ \mathrm{rad/s}4.0 rad/s.

Part 4 done

5

Part 5 of 5: Real examples show the same rule in action

The rule explains many everyday motions. In each one, the net external torque is small or zero, and the shape or mass distribution changes.

  • A skater pulls in her arms and spins faster.
  • A diver tucks into a ball to rotate quickly, then extends to slow the spin.
  • A person on a turning stool pulls held weights inward and speeds up.
  • A planet on an elliptical orbit moves faster when it is closer to its star.

The planet case works because gravity points toward the star. It produces no torque about the star, so the planet's angular momentum about it stays constant.

Exam tip

In explanations, name the system and state that the net external torque is zero. Then say how III changes and what that does to ω\omegaω.

Note read

Check your recall[13 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[2 marks]

    State the law of conservation of angular momentum.

    Show mark schemeHide mark scheme

    Model answer

    The total angular momentum of a system stays constant when the net external torque on the system is zero.

    • 1 mark for stating that total angular momentum stays constant
    • 1 mark for stating the condition of zero net external torque
  2. 2.Explain[3 marks]

    Explain why a skater spins faster when she pulls her arms in.

    Show mark schemeHide mark scheme

    Model answer

    No net external torque acts, so her angular momentum is constant. Pulling in her arms reduces her rotational inertia. Since L=IωL = I\omegaL=Iω, her angular speed must increase.

    • 1 mark for stating that no net external torque acts, so angular momentum is constant
    • 1 mark for stating that rotational inertia decreases
    • 1 mark for linking constant L=IωL = I\omegaL=Iω to an increase in angular speed
  3. 3.Calculate[3 marks]

    Calculate the new angular speed of a person on a turning stool who has I=2.5 kg m2I = 2.5\ \mathrm{kg\,m^2}I=2.5 kgm2 and spins at 4.0 rad/s, after pulling weights inward reduces III to 1.0 kg m21.0\ \mathrm{kg\,m^2}1.0 kgm2.

    Show mark schemeHide mark scheme

    Model answer

    Iiωi=IfωfI_i\omega_i = I_f\omega_fIi​ωi​=If​ωf​, so (2.5)(4.0)=(1.0)ωf(2.5)(4.0) = (1.0)\omega_f(2.5)(4.0)=(1.0)ωf​. Therefore ωf=10 rad/s\omega_f = 10\ \mathrm{rad/s}ωf​=10 rad/s.

    • 1 mark for equating initial and final angular momentum
    • 1 mark for substituting the values correctly
    • 1 mark for obtaining 10 rad/s10\ \mathrm{rad/s}10 rad/s
  4. 4.Calculate[3 marks]

    Calculate the common angular speed when disk 1, with I=3.0 kg m2I = 3.0\ \mathrm{kg\,m^2}I=3.0 kgm2 spinning at 8.0 rad/s, sticks to disk 2, with I=5.0 kg m2I = 5.0\ \mathrm{kg\,m^2}I=5.0 kgm2, at rest on the same axis.

    Show mark schemeHide mark scheme

    Model answer

    Li=(3.0)(8.0)=24 kg m2/sL_i = (3.0)(8.0) = 24\ \mathrm{kg\,m^2/s}Li​=(3.0)(8.0)=24 kgm2/s. After joining, 24=(3.0+5.0)ωf24 = (3.0 + 5.0)\omega_f24=(3.0+5.0)ωf​, so ωf=3.0 rad/s\omega_f = 3.0\ \mathrm{rad/s}ωf​=3.0 rad/s.

    • 1 mark for calculating the initial angular momentum as 24 kg m²/s
    • 1 mark for using the combined rotational inertia of 8.0 kg m²
    • 1 mark for obtaining 3.0 rad/s3.0\ \mathrm{rad/s}3.0 rad/s
  5. 5.Describe[2 marks]

    Describe one real-life example of conservation of angular momentum and how the spin changes.

    Show mark schemeHide mark scheme

    Model answer

    A diver tucks into a ball, which lowers rotational inertia, so the rotation speeds up. The diver extends the body to slow the rotation.

    • 1 mark for identifying a suitable example
    • 1 mark for describing the change in spin rate that results from the change in shape

Practice this topic

7 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 7 answered

1.

Easy[1 mark]

Under which condition is the total angular momentum of a system conserved?
Show answer and explanation

Answer: B · Worked explanation

Angular momentum is conserved when no net external torque acts. Zero net force is not enough, because two equal and opposite forces at different points can still produce a net torque. Constant kinetic energy is also unrelated, as the skater example shows.
2.

Easy[1 mark]

A skater spinning on ice pulls her arms close to her body. Which quantity increases?
Show answer and explanation

Answer: C · Worked explanation

Her angular momentum stays constant, and pulling in the arms reduces her rotational inertia. To keep L=IωL = I\omegaL=Iω fixed, her angular speed must rise. The angular momentum option is tempting, but no external torque acts to change it.
3.

Medium·Calculate[1 mark]

A wheel with I=6.0 kg m2I = 6.0\ \mathrm{kg\,m^2}I=6.0 kgm2 spins at 2.0 rad/s. With no external torque, its rotational inertia changes to 4.0 kg m24.0\ \mathrm{kg\,m^2}4.0 kgm2. Calculate its new angular speed.
Show answer and explanation

Answer: D · Worked explanation

Set Iiωi=IfωfI_i\omega_i = I_f\omega_fIi​ωi​=If​ωf​: (6.0)(2.0)=(4.0)ωf(6.0)(2.0) = (4.0)\omega_f(6.0)(2.0)=(4.0)ωf​, so ωf=3.0 rad/s\omega_f = 3.0\ \mathrm{rad/s}ωf​=3.0 rad/s. The 1.3 option applies the ratio the wrong way round. The 12 option multiplies the initial values and never divides by the final inertia.
4.

Medium·Calculate[2 marks]

A disk with I=0.20 kg m2I = 0.20\ \mathrm{kg\,m^2}I=0.20 kgm2 spins at 10 rad/s. A ring with I=0.30 kg m2I = 0.30\ \mathrm{kg\,m^2}I=0.30 kgm2, initially at rest, drops onto it and they turn together. Calculate their common angular speed.
Show answer and explanation

Answer: D · Worked explanation

Initial angular momentum is (0.20)(10)=2.0(0.20)(10) = 2.0(0.20)(10)=2.0. After joining, 2.0=(0.50)ωf2.0 = (0.50)\omega_f2.0=(0.50)ωf​, so ωf=4.0 rad/s\omega_f = 4.0\ \mathrm{rad/s}ωf​=4.0 rad/s. The 5.0 option averages the speeds, which ignores the rotational inertias, and the 10 option wrongly keeps the original speed.
5.

Medium·Determine[2 marks]

A skater has I=4.0 kg m2I = 4.0\ \mathrm{kg\,m^2}I=4.0 kgm2 and spins at 3.0 rad/s. She pulls in her arms so I=2.0 kg m2I = 2.0\ \mathrm{kg\,m^2}I=2.0 kgm2. Determine the change in her rotational kinetic energy.
Show answer and explanation

Answer: B · Worked explanation

Angular momentum is 12 kg m2/s12\ \mathrm{kg\,m^2/s}12 kgm2/s, so the final speed is 6.0 rad/s. Then Ki=12(4.0)(3.0)2=18 JK_i = \frac{1}{2}(4.0)(3.0)^2 = 18\ \mathrm{J}Ki​=21​(4.0)(3.0)2=18 J and Kf=12(2.0)(6.0)2=36 JK_f = \frac{1}{2}(2.0)(6.0)^2 = 36\ \mathrm{J}Kf​=21​(2.0)(6.0)2=36 J, a gain of 18 J. The no-change option confuses conserved LLL with conserved energy.
6.

Hard·Calculate[2 marks]

A platform with I=60 kg m2I = 60\ \mathrm{kg\,m^2}I=60 kgm2 turns at 1.0 rad/s with a 30 kg child standing 2.0 m from the axis. The child walks to the axis and is treated as a point mass there. Calculate the new angular speed.
Show answer and explanation

Answer: A · Worked explanation

The child's inertia at the start is mr2=(30)(2.0)2=120 kg m2mr^2 = (30)(2.0)^2 = 120\ \mathrm{kg\,m^2}mr2=(30)(2.0)2=120 kgm2, so the total is 180 and L=(180)(1.0)=180 kg m2/sL = (180)(1.0) = 180\ \mathrm{kg\,m^2/s}L=(180)(1.0)=180 kgm2/s. At the axis, the child adds about zero, leaving I=60I = 60I=60. So ωf=180/60=3.0 rad/s\omega_f = 180/60 = 3.0\ \mathrm{rad/s}ωf​=180/60=3.0 rad/s. The 1.5 option divides by the child's initial inertia of 120 instead of the platform's 60, and the 1.0 option wrongly assumes the speed is unchanged.
7.

Hard·Determine[2 marks]

Disk A (I=3.0 kg m2I = 3.0\ \mathrm{kg\,m^2}I=3.0 kgm2) spins counterclockwise at 4.0 rad/s. Disk B (I=3.0 kg m2I = 3.0\ \mathrm{kg\,m^2}I=3.0 kgm2) on the same axis spins clockwise at 2.0 rad/s. They are pressed together until they turn as one. Determine the final angular velocity, taking counterclockwise as positive.
Show answer and explanation

Answer: D · Worked explanation

Initial angular momentum is (3.0)(4.0)+(3.0)(−2.0)=+6.0(3.0)(4.0) + (3.0)(-2.0) = +6.0(3.0)(4.0)+(3.0)(−2.0)=+6.0. The combined inertia is 6.0, so ωf=6.0/6.0=+1.0 rad/s\omega_f = 6.0/6.0 = +1.0\ \mathrm{rad/s}ωf​=6.0/6.0=+1.0 rad/s. The +2.0 option divides by only one disk's inertia, forgetting that both disks now turn together.

Keep going

Next topic6.5 RollingPrevious topic6.3 Angular momentum and angular impulse

More in Unit 6 · Energy and Momentum of Rotating Systems

  1. 6.1Rotational kinetic energyNotes · 9 questions
  2. 6.2Torque and workNotes · 10 questions
  3. 6.3Angular momentum and angular impulseNotes · 10 questions
  4. 6.4Conservation of angular momentumNotes · 7 questions
  5. 6.5RollingNotes · 7 questions
  6. 6.6Motion of orbiting satellitesNotes · 9 questions

All AP Physics 1 topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/5 read

  1. 1Angular momentum stays fixed when no external torque acts
  2. 2Changing the mass distribution changes the spin rate
  3. 3Setting initial and final angular momentum equal solves spin problems
  4. 4Objects that join together share the total angular momentum
  5. 5Real examples show the same rule in action
  6. Check your recall
  7. Practice: 7 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe

Angular speed against rotational inertia

Angular speed ω (rad s⁻¹)00.511.522.533.5402468Rotational inertia I (kg m²)
  • L = 6.0 kg m² s⁻¹
  • Arms in
  • Arms out