Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Physics 1
  3. ›6 Energy and Momentum of Rotating Systems
  4. ›6.5 Rolling

AP Physics 1 · Unit 6 · Energy and Momentum of Rotating Systems

6.5 Rolling

Describe rolling without slipping, relate linear and angular speed, and calculate translational and rotational kinetic energy for rolling objects.

  • 4 min read
  • 5 parts
  • 7 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 7 questions
1/5A rolling object both moves forward and spins
  1. 1A rolling object both moves forward and spins
  2. 2Without slipping, the contact point is momentarily at rest
  3. 3Linear and angular speeds are linked by the radius
  4. 4Rolling kinetic energy has translational and rotational parts
  5. 5Rolling energy is found by adding the two parts
  6. Check your recall
  7. Practice: 7 questions
1

Part 1 of 5: A rolling object both moves forward and spins

A wheel rolling along a road does two things at once. Its center moves forward, and the whole wheel turns about that center. Both motions are real parts of the total motion.

The forward motion of the center is translational motion. The turning about the center is rotational motion. To describe rolling, treat each one separately and then combine them.

Common mistake

A rolling wheel is not purely turning in place, and it is not purely sliding. It does both together.

Key terms · tap one for its definition

translational motion

Motion in which every part of an object has the same velocity; for a rolling object it describes the center of mass.

rotational motion

Motion about an axis in which every point moves in a circle about that axis with the same angular velocity.

Part 1 done

2

Part 2 of 5: Without slipping, the contact point is momentarily at rest

Now ask what happens where the wheel touches the ground. Think of a tire on dry pavement. The tire does not skid along the surface. This is rolling without slipping.

In that case, the contact point is at rest relative to the ground at that instant. The center moves forward at speed vvv. The top of the wheel moves at 2v2v2v relative to the ground.

Figure 1. The speed of a point depends on its position. The top moves fastest relative to the ground, and the contact point is momentarily at rest.

Static friction acts at the contact point. Because that point does not move, friction does no work while the object rolls without slipping.

Key term

rolling without slipping

Rolling in which the contact point has zero velocity relative to the surface, so that vcm=ωRv_{cm} = \omega Rvcm​=ωR.

Part 2 done

3

Part 3 of 5: Linear and angular speeds are linked by the radius

Consider one full turn without slipping. The wheel advances a distance equal to its circumference, 2πR2\pi R2πR. This links the distance traveled to the angle turned. Each turn lays down exactly one circumference of ground.

The center's speed is vcm=ωRv_{cm} = \omega Rvcm​=ωR. Its acceleration is acm=αRa_{cm} = \alpha Racm​=αR. Here RRR is the radius, ω\omegaω is in rad/s, and α\alphaα is the angular acceleration. These relations hold only without slipping. If the wheel skids, the center and the rim no longer match.

Worked example

Angular speed of a bicycle wheel

A bicycle wheel of radius 0.35 m rolls without slipping at 7.0 m/s. Calculate its angular speed.
  1. 1
    Use vcm=ωRv_{cm} = \omega Rvcm​=ωR.
  2. 2
    Rearrange: ω=vcm/R\omega = v_{cm}/Rω=vcm​/R.
  3. 3
    Substitute: ω=7.00.35=20 rad/s\omega = \frac{7.0}{0.35} = 20\ \mathrm{rad/s}ω=0.357.0​=20 rad/s.

Answer: The angular speed is 20 rad/s20\ \mathrm{rad/s}20 rad/s.

Part 3 done

4

Part 4 of 5: Rolling kinetic energy has translational and rotational parts

Now that both motions are described, energy follows. The total kinetic energy is a sum of two terms. One comes from the center's motion, and the other from the spin about the center. Both terms are positive, so a rolling object always has more energy than a sliding one at the same speed.

Ktotal=12Mvcm2+12Icmω2K_{\mathrm{total}} = \frac{1}{2}Mv_{cm}^2 + \frac{1}{2}I_{cm}\omega^2Ktotal​=21​Mvcm2​+21​Icm​ω2. Using ω=vcm/R\omega = v_{cm}/Rω=vcm​/R, the second term depends on the object's shape through IcmI_{cm}Icm​. The table shows common cases. The more mass sits far from the center, the larger the rotational share of the energy.

Rolling shapes without slipping

ShapeRotational inertiaTotal kinetic energy
HoopMR2MR^2MR2Mv2Mv^2Mv2
Solid cylinder12MR2\frac{1}{2}MR^221​MR234Mv2\frac{3}{4}Mv^243​Mv2
Solid sphere25MR2\frac{2}{5}MR^252​MR2710Mv2\frac{7}{10}Mv^2107​Mv2
Shape
Hoop
Rotational inertia
MR2MR^2MR2
Total kinetic energy
Mv2Mv^2Mv2
Shape
Solid cylinder
Rotational inertia
12MR2\frac{1}{2}MR^221​MR2
Total kinetic energy
34Mv2\frac{3}{4}Mv^243​Mv2
Shape
Solid sphere
Rotational inertia
25MR2\frac{2}{5}MR^252​MR2
Total kinetic energy
710Mv2\frac{7}{10}Mv^2107​Mv2

Part 4 done

5

Part 5 of 5: Rolling energy is found by adding the two parts

Work through the numbers in order. Find the angular speed first. Then find each energy and add them. Finally, check the total against the shortcut for the shape. Use meters, kilograms and seconds so that the result comes out in joules. The shortcut is a quick check, not a replacement for the full method.

Worked example

Energy of a rolling hoop

A hoop of mass 1.5 kg and radius 0.20 m rolls without slipping at 4.0 m/s. Find its total kinetic energy.
  1. 1
    Angular speed: ω=v/R=4.0/0.20=20 rad/s\omega = v/R = 4.0/0.20 = 20\ \mathrm{rad/s}ω=v/R=4.0/0.20=20 rad/s.
  2. 2
    Translational: 12(1.5)(4.0)2=12 J\frac{1}{2}(1.5)(4.0)^2 = 12\ \mathrm{J}21​(1.5)(4.0)2=12 J.
  3. 3
    Rotational inertia: I=MR2=(1.5)(0.20)2=0.060 kg m2I = MR^2 = (1.5)(0.20)^2 = 0.060\ \mathrm{kg\,m^2}I=MR2=(1.5)(0.20)2=0.060 kgm2.
  4. 4
    Rotational: 12(0.060)(20)2=12 J\frac{1}{2}(0.060)(20)^2 = 12\ \mathrm{J}21​(0.060)(20)2=12 J.
  5. 5
    Total: 12+12=24 J12 + 12 = 24\ \mathrm{J}12+12=24 J, which matches Mv2Mv^2Mv2.

Answer: The total kinetic energy is 24 J24\ \mathrm{J}24 J.

Common mistake

Do not leave out the rotational term. Using only 12Mv2\frac{1}{2}Mv^221​Mv2 underestimates the energy of a rolling object.

Note read

Check your recall[13 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Describe[3 marks]

    Describe the motion of an object that rolls without slipping.

    Show mark schemeHide mark scheme

    Model answer

    Its center of mass moves forward in translation while the whole object rotates about that center. The contact point with the surface does not slide and is momentarily at rest.

    • 1 mark for stating that the center moves in translation
    • 1 mark for stating that the object rotates about its center
    • 1 mark for stating that the contact point does not slip and is momentarily at rest
  2. 2.State[2 marks]

    State the relationship between the speed of the center and the angular speed for rolling without slipping.

    Show mark schemeHide mark scheme

    Model answer

    vcm=ωRv_{cm} = \omega Rvcm​=ωR, where RRR is the radius of the object.

    • 1 mark for stating vcm=ωRv_{cm} = \omega Rvcm​=ωR
    • 1 mark for identifying R as the radius
  3. 3.Calculate[2 marks]

    Calculate the speed of the center of a wheel of radius 0.40 m that rolls without slipping while turning at 15 rad/s.

    Show mark schemeHide mark scheme

    Model answer

    v=ωR=(15)(0.40)=6.0 m/sv = \omega R = (15)(0.40) = 6.0\ \mathrm{m/s}v=ωR=(15)(0.40)=6.0 m/s.

    • 1 mark for using v=ωRv = \omega Rv=ωR
    • 1 mark for obtaining 6.0 m/s
  4. 4.Calculate[4 marks]

    Calculate the total kinetic energy of a hoop of mass 2.0 kg and radius 0.25 m that rolls without slipping at 3.0 m/s. Its rotational inertia is MR2MR^2MR2.

    Show mark schemeHide mark scheme

    Model answer

    ω=v/R=12 rad/s\omega = v/R = 12\ \mathrm{rad/s}ω=v/R=12 rad/s. Translational energy is 12(2.0)(3.0)2=9.0 J\frac{1}{2}(2.0)(3.0)^2 = 9.0\ \mathrm{J}21​(2.0)(3.0)2=9.0 J. I=0.125 kg m2I = 0.125\ \mathrm{kg\,m^2}I=0.125 kgm2, so rotational energy is 12(0.125)(12)2=9.0 J\frac{1}{2}(0.125)(12)^2 = 9.0\ \mathrm{J}21​(0.125)(12)2=9.0 J. The total is 18 J.

    • 1 mark for calculating ω=12 rad/s\omega = 12\ \mathrm{rad/s}ω=12 rad/s
    • 1 mark for calculating translational energy of 9.0 J
    • 1 mark for calculating rotational energy of 9.0 J
    • 1 mark for adding to obtain 18 J
  5. 5.Explain[2 marks]

    Explain why the total kinetic energy of a rolling object is greater than 12Mv2\frac{1}{2}Mv^221​Mv2.

    Show mark schemeHide mark scheme

    Model answer

    A rolling object also spins about its center, so it has rotational kinetic energy 12Iω2\frac{1}{2}I\omega^221​Iω2. This adds to the translational energy.

    • 1 mark for stating that the object also rotates
    • 1 mark for identifying the extra rotational kinetic energy 12Iω2\frac{1}{2}I\omega^221​Iω2

Practice this topic

7 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 7 answered

1.

Medium·Calculate[1 mark]

A wheel of radius 0.25 m rolls without slipping with an angular speed of 12 rad/s. Calculate the speed of its center.
Show answer and explanation

Answer: D · Worked explanation

Use v=ωR=(12)(0.25)=3.0 m/sv = \omega R = (12)(0.25) = 3.0\ \mathrm{m/s}v=ωR=(12)(0.25)=3.0 m/s. The 48 option divides by the radius instead of multiplying, and the 0.021 option divides the radius by the angular speed. The 6.0 option doubles the result, as if for the top of the wheel.
2.

Medium·Calculate[1 mark]

The center of a wheel rolling without slipping moves at 5.0 m/s. Calculate the speed of the top of the wheel relative to the ground.
Show answer and explanation

Answer: B · Worked explanation

The top combines the center's speed with the spin speed at the rim. Both equal 5.0 m/s, so the top moves at 5.0+5.0=10 m/s5.0 + 5.0 = 10\ \mathrm{m/s}5.0+5.0=10 m/s relative to the ground. The 5.0 option gives only the center's speed. The 0 option is the speed of the contact point.
3.

Medium·Calculate[2 marks]

A solid cylinder of mass 4.0 kg, with I=12MR2I = \frac{1}{2}MR^2I=21​MR2, rolls without slipping at 2.0 m/s. Calculate its total kinetic energy.
Show answer and explanation

Answer: A · Worked explanation

Translational energy is 12(4.0)(2.0)2=8.0 J\frac{1}{2}(4.0)(2.0)^2 = 8.0\ \mathrm{J}21​(4.0)(2.0)2=8.0 J. Rotational energy is 12(12MR2)(v/R)2=14Mv2=4.0 J\frac{1}{2}(\frac{1}{2}MR^2)(v/R)^2 = \frac{1}{4}Mv^2 = 4.0\ \mathrm{J}21​(21​MR2)(v/R)2=41​Mv2=4.0 J. The total is 12 J. The 8.0 J option includes only the translational part, leaving out the energy of the spin.
4.

Medium·Determine[2 marks]

A thin hoop with I=MR2I = MR^2I=MR2 rolls without slipping. Determine the fraction of its total kinetic energy that is rotational.
Show answer and explanation

Answer: B · Worked explanation

Translational energy is 12Mv2\frac{1}{2}Mv^221​Mv2. Rotational energy is 12(MR2)(v/R)2=12Mv2\frac{1}{2}(MR^2)(v/R)^2 = \frac{1}{2}Mv^221​(MR2)(v/R)2=21​Mv2. The two are equal, so half the total is rotational. The 1/3 option belongs to a solid cylinder, where the rotational share is smaller because the mass lies closer to the axis.
5.

Hard·Calculate[2 marks]

A wheel of radius 0.30 m rolls without slipping through 5.0 complete revolutions. Calculate the distance moved by its center.
Show answer and explanation

Answer: A · Worked explanation

One revolution moves the center 2πR2\pi R2πR. The distance is 5.0×2π×0.30≈9.4 m5.0\times2\pi\times0.30 \approx 9.4\ \mathrm{m}5.0×2π×0.30≈9.4 m. The 4.7 option uses πR\pi RπR per turn, which is half the circumference. The 1.5 option ignores the factor of 2π2\pi2π.
6.

Hard·Predict[2 marks]

A hoop and a solid cylinder have the same mass and radius. Both are released from rest at the top of an incline and roll without slipping. Predict which reaches the bottom with the greater speed.
Show answer and explanation

Answer: C · Worked explanation

Both gain the same energy MghMghMgh. For the hoop, Mv2=MghMv^2 = MghMv2=Mgh. For the cylinder, 34Mv2=Mgh\frac{3}{4}Mv^2 = Mgh43​Mv2=Mgh, giving a larger vvv. The hoop puts more of the energy into rotation, leaving less for translation, so the tie options are wrong.
7.

Hard·Calculate[2 marks]

A solid sphere of mass 2.0 kg and radius 0.10 m, with I=25MR2I = \frac{2}{5}MR^2I=52​MR2, rolls without slipping at 5.0 m/s. Calculate its total kinetic energy.
Show answer and explanation

Answer: D · Worked explanation

Translational energy is 12(2.0)(5.0)2=25 J\frac{1}{2}(2.0)(5.0)^2 = 25\ \mathrm{J}21​(2.0)(5.0)2=25 J. Rotational energy is 12(0.0080)(50)2=10 J\frac{1}{2}(0.0080)(50)^2 = 10\ \mathrm{J}21​(0.0080)(50)2=10 J, using I=0.0080I = 0.0080I=0.0080 and ω=50 rad/s\omega = 50\ \mathrm{rad/s}ω=50 rad/s. The total is 35 J. The 25 J option leaves out the spin.

Keep going

Next topic6.6 Motion of orbiting satellitesPrevious topic6.4 Conservation of angular momentum

More in Unit 6 · Energy and Momentum of Rotating Systems

  1. 6.1Rotational kinetic energyNotes · 9 questions
  2. 6.2Torque and workNotes · 10 questions
  3. 6.3Angular momentum and angular impulseNotes · 10 questions
  4. 6.4Conservation of angular momentumNotes · 7 questions
  5. 6.5RollingNotes · 7 questions
  6. 6.6Motion of orbiting satellitesNotes · 9 questions

All AP Physics 1 topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/5 read

  1. 1A rolling object both moves forward and spins
  2. 2Without slipping, the contact point is momentarily at rest
  3. 3Linear and angular speeds are linked by the radius
  4. 4Rolling kinetic energy has translational and rotational parts
  5. 5Rolling energy is found by adding the two parts
  6. Check your recall
  7. Practice: 7 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe