Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Physics 1
  3. ›8 Fluids
  4. ›8.2 Pressure

AP Physics 1 · Unit 8 · Fluids

8.2 Pressure

Define pressure, calculate it from force and area, and explain how fluid pressure changes with depth.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Pressure describes how concentrated a force is
  1. 1Pressure describes how concentrated a force is
  2. 2Dividing the force by the area gives the pressure
  3. 3Fluid pressure increases as you go deeper
  4. 4At a given depth, the pressure is the same everywhere
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Pressure describes how concentrated a force is

A person in boots can sink into deep snow. The same person on skis stays on top. The force is the same, but skis spread it over a much larger area.

Pressure is the force acting on a surface divided by the area of that surface. Its SI unit is the pascal (Pa), and 1 Pa=1 N m−21\ \mathrm{Pa}=1\ \mathrm{N\,m^{-2}}1 Pa=1 Nm−2.

Common mistake

Pressure has no direction of its own, because it is a scalar. The force it produces on a surface acts perpendicular to that surface.

Key terms · tap one for its definition

Pressure

The magnitude of the force perpendicular to a surface divided by the area it acts on; a scalar measured in pascals.

pascal

The SI unit of pressure, equal to one newton of perpendicular force per square meter of area.

Part 1 done

2

Part 2 of 4: Dividing the force by the area gives the pressure

Now put a number on the idea. Take the force pushing perpendicular to a surface and divide by the area it acts over. This gives P=FAP=\frac{F}{A}P=AF​.

Doubling the force doubles the pressure. Doubling the area halves it. This is why a sharp knife cuts better than a dull one. The same push acts over a much smaller area.

Worked example

Pressure under a crate

A crate presses straight down on a floor with a force of 600 N. The contact area is 0.0300 m20.0300\ \mathrm{m^2}0.0300 m2. Calculate the pressure on the floor.
  1. 1
    Use P=FAP=\frac{F}{A}P=AF​.
  2. 2
    Substitute: P=600 N0.0300 m2P=\frac{600\ \mathrm{N}}{0.0300\ \mathrm{m^2}}P=0.0300 m2600 N​.
  3. 3
    Calculate: P=20000 N m−2P=20000\ \mathrm{N\,m^{-2}}P=20000 Nm−2.

Answer: The pressure is 2.00×104 Pa2.00\times10^{4}\ \mathrm{Pa}2.00×104 Pa.

Exam tip

Convert area to square meters before dividing. An area in square centimeters must first be divided by 10,000.

Part 2 done

Quick check

One question on the part you just read

Easy

Which unit is equivalent to the pascal?
Show answer and explanation

Answer: A · Worked explanation

Pressure is force divided by area, so its unit is newtons per square meter, which is one pascal. The unit N m\mathrm{N\,m}Nm is a joule, a unit of energy. The unit J s−1\mathrm{J\,s^{-1}}Js−1 is a watt, which measures power.
3

Part 3 of 4: Fluid pressure increases as you go deeper

Dive to the bottom of a pool and your ears notice it. Each layer of water must support the weight of the water above. So deeper layers are squeezed harder.

In a fluid at rest, the pressure added by depth is ρgh\rho g hρgh. Here ρ\rhoρ is the fluid density, ggg is the gravitational field strength, and hhh is the depth.

This quantity is the gauge pressure. Adding the pressure P0P_0P0​ at the surface, usually atmospheric pressure, gives the absolute pressure: P=P0+ρghP=P_0+\rho g hP=P0​+ρgh.

Worked example

Pressure 5.0 m down

Find the absolute pressure 5.0 m below the surface of fresh water. Use ρ=1000 kg/m3\rho=1000\ \mathrm{kg/m^3}ρ=1000 kg/m3, g=9.8 m/s2g=9.8\ \mathrm{m/s^2}g=9.8 m/s2 and P0=1.01×105 PaP_0=1.01\times10^{5}\ \mathrm{Pa}P0​=1.01×105 Pa.
  1. 1
    Gauge pressure: ρgh=(1000)(9.8)(5.0)=49000 Pa\rho g h=(1000)(9.8)(5.0)=49000\ \mathrm{Pa}ρgh=(1000)(9.8)(5.0)=49000 Pa.
  2. 2
    Add the surface pressure: P=101000+49000P=101000+49000P=101000+49000.
  3. 3
    Calculate: P=150000 PaP=150000\ \mathrm{Pa}P=150000 Pa.

Answer: The absolute pressure is 1.5×105 Pa1.5\times10^{5}\ \mathrm{Pa}1.5×105 Pa.

Key terms · tap one for its definition

gauge pressure

The pressure above the surface pressure; in a fluid at rest it equals ρgh\rho g hρgh.

absolute pressure

The total pressure at a point, equal to the surface pressure plus the gauge pressure.

Part 3 done

4

Part 4 of 4: At a given depth, the pressure is the same everywhere

Next consider position. In a fluid at rest, two points at the same depth have the same pressure. This holds in every direction, so a diver feels it on all sides.

Only the depth below the surface matters. The width or shape of the container does not change the pressure at a given depth.

Figure 1. Absolute pressure rises steadily with depth. The line starts at atmospheric pressure at the surface.

Common mistake

Depth means vertical distance below the surface. Distance measured along a slanted path does not count.

Note read

Check your recall[14 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[2 marks]

    State what is meant by pressure and give its SI unit.

    Show mark schemeHide mark scheme

    Model answer

    Pressure is the force perpendicular to a surface divided by the area over which it acts. Its SI unit is the pascal, N m−2\mathrm{N\,m^{-2}}Nm−2.

    • 1 mark for stating that pressure is perpendicular force divided by area
    • 1 mark for giving the pascal (or N m−2\mathrm{N\,m^{-2}}Nm−2) as the unit
  2. 2.Calculate[2 marks]

    Calculate the pressure produced by an 80 N force acting perpendicular to an area of 0.020 m20.020\ \mathrm{m^2}0.020 m2.

    Show mark schemeHide mark scheme

    Model answer

    P=FA=800.020=4000 PaP=\frac{F}{A}=\frac{80}{0.020}=4000\ \mathrm{Pa}P=AF​=0.02080​=4000 Pa.

    • 1 mark for substituting into P=F/AP=F/AP=F/A
    • 1 mark for obtaining 4000 Pa4000\ \mathrm{Pa}4000 Pa (or 4.0×103 Pa4.0\times10^{3}\ \mathrm{Pa}4.0×103 Pa)
  3. 3.Explain[3 marks]

    Explain why the pressure in a lake increases with depth.

    Show mark schemeHide mark scheme

    Model answer

    Each layer of water supports the weight of the water above it. A deeper point has more water above it. The weight per unit area is therefore greater, so the pressure is greater.

    • 1 mark for stating that water layers support the weight of the water above
    • 1 mark for stating that deeper points have more water above them
    • 1 mark for linking the greater weight per unit area to greater pressure
  4. 4.Calculate[3 marks]

    Calculate the gauge pressure at a depth of 3.0 m in water of density 1000 kg/m31000\ \mathrm{kg/m^3}1000 kg/m3.

    Show mark schemeHide mark scheme

    Model answer

    ρgh=(1000)(9.8)(3.0)=29400 Pa≈2.9×104 Pa\rho g h=(1000)(9.8)(3.0)=29400\ \mathrm{Pa}\approx2.9\times10^{4}\ \mathrm{Pa}ρgh=(1000)(9.8)(3.0)=29400 Pa≈2.9×104 Pa.

    • 1 mark for using gauge pressure =ρgh=\rho g h=ρgh
    • 1 mark for substituting the given values correctly
    • 1 mark for obtaining about 2.9×104 Pa2.9\times10^{4}\ \mathrm{Pa}2.9×104 Pa
  5. 5.Explain[2 marks]

    Explain why snowshoes stop a walker from sinking into soft snow.

    Show mark schemeHide mark scheme

    Model answer

    The walker's weight is the same, but snowshoes spread it over a larger area. Pressure on the snow is then smaller, so the snow is less likely to give way.

    • 1 mark for stating that the larger area spreads the same force
    • 1 mark for concluding that the pressure on the snow is smaller
  6. 6.Compare[2 marks]

    Compare absolute pressure and gauge pressure at the same point in a fluid.

    Show mark schemeHide mark scheme

    Model answer

    Gauge pressure is ρgh\rho g hρgh, the part due to depth alone. Absolute pressure is larger, because it also includes the surface pressure P0P_0P0​.

    • 1 mark for stating that gauge pressure is due to depth alone (ρgh\rho g hρgh)
    • 1 mark for stating that absolute pressure also includes the surface pressure

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Identify[1 mark]

Identify the change that would increase the pressure a box exerts on the floor without changing the box's weight.
Show answer and explanation

Answer: A · Worked explanation

Pressure is force divided by area. The weight stays fixed, so a smaller contact area gives a larger pressure. Turning the box onto a larger face does the opposite, because the same force is spread over more area.
3.

Easy·Predict[1 mark]

Predict what happens to the gauge pressure in a still lake when the depth doubles.
Show answer and explanation

Answer: A · Worked explanation

Gauge pressure is ρgh\rho g hρgh, which is directly proportional to depth. Doubling hhh doubles the gauge pressure. Quadrupling would need a depth four times as large, and the pressure does depend on depth.
4.

Medium·Calculate[1 mark]

Calculate the pressure when a 450 N force acts perpendicular to an area of 0.0150 m20.0150\ \mathrm{m^2}0.0150 m2.
Show answer and explanation

Answer: A · Worked explanation

P=FA=4500.0150=30000 PaP=\frac{F}{A}=\frac{450}{0.0150}=30000\ \mathrm{Pa}P=AF​=0.0150450​=30000 Pa. The value 6.8 Pa6.8\ \mathrm{Pa}6.8 Pa comes from multiplying force and area, which is not the definition. The value 3.3×10−5 Pa3.3\times10^{-5}\ \mathrm{Pa}3.3×10−5 Pa comes from dividing area by force.
5.

Medium·Calculate[2 marks]

A force of 800 N acts perpendicular to an area of 40 cm240\ \mathrm{cm^2}40 cm2. Calculate the pressure.
Show answer and explanation

Answer: B · Worked explanation

Convert the area: 40 cm2=0.0040 m240\ \mathrm{cm^2}=0.0040\ \mathrm{m^2}40 cm2=0.0040 m2. Then P=8000.0040=2.0×105 PaP=\frac{800}{0.0040}=2.0\times10^{5}\ \mathrm{Pa}P=0.0040800​=2.0×105 Pa. The value 20 Pa20\ \mathrm{Pa}20 Pa divides by 40 without converting units, which gives a number in the wrong unit.
6.

Medium·Calculate[2 marks]

Oil of density 800 kg m−3800\ \mathrm{kg\,m^{-3}}800 kgm−3 fills a tank. Calculate the gauge pressure 6.0 m below the surface. Use g=9.8 m s−2g=9.8\ \mathrm{m\,s^{-2}}g=9.8 ms−2.
Show answer and explanation

Answer: C · Worked explanation

Gauge pressure is ρgh=(800)(9.8)(6.0)=47040 Pa≈4.7×104 Pa\rho g h=(800)(9.8)(6.0)=47040\ \mathrm{Pa}\approx4.7\times10^{4}\ \mathrm{Pa}ρgh=(800)(9.8)(6.0)=47040 Pa≈4.7×104 Pa. The value 1.5×105 Pa1.5\times10^{5}\ \mathrm{Pa}1.5×105 Pa is tempting, but it adds atmospheric pressure, which gives absolute pressure rather than gauge pressure.
7.

Medium·Compare[1 mark]

A lake has a narrow bay joined to a wide open section. Compare the pressures at a depth of 4.0 m in the bay and at 4.0 m in the open section.
Show answer and explanation

Answer: A · Worked explanation

For connected fluid at rest, pressure depends only on depth, density and surface pressure. Both points have the same depth, so the pressures are equal. The amount or spread of the water does not matter.
8.

Hard·Determine[2 marks]

Determine how far down in fresh water the absolute pressure reaches twice atmospheric pressure. Use P0=1.01×105 PaP_0=1.01\times10^{5}\ \mathrm{Pa}P0​=1.01×105 Pa, ρ=1000 kg m−3\rho=1000\ \mathrm{kg\,m^{-3}}ρ=1000 kgm−3 and g=9.8 m s−2g=9.8\ \mathrm{m\,s^{-2}}g=9.8 ms−2.
Show answer and explanation

Answer: C · Worked explanation

Doubling the absolute pressure means the gauge pressure equals P0P_0P0​. So h=P0ρg=1.01×105(1000)(9.8)≈10 mh=\frac{P_0}{\rho g}=\frac{1.01\times10^{5}}{(1000)(9.8)}\approx10\ \mathrm{m}h=ρgP0​​=(1000)(9.8)1.01×105​≈10 m. The value 21 m wrongly treats 2P02P_02P0​ as the gauge pressure, forgetting that the surface already supplies P0P_0P0​.
9.

Hard·Determine[2 marks]

A block weighing 80 N measures 0.10 m by 0.20 m by 0.40 m. Determine the increase in pressure on the table when the block stands on its smallest face instead of its largest.
Show answer and explanation

Answer: D · Worked explanation

The largest face is 0.20×0.40=0.080 m20.20\times0.40=0.080\ \mathrm{m^2}0.20×0.40=0.080 m2, giving 1000 Pa1000\ \mathrm{Pa}1000 Pa. The smallest face is 0.10×0.20=0.020 m20.10\times0.20=0.020\ \mathrm{m^2}0.10×0.20=0.020 m2, giving 4000 Pa4000\ \mathrm{Pa}4000 Pa. The increase is 3000 Pa3000\ \mathrm{Pa}3000 Pa. The value 4.0×103 Pa4.0\times10^{3}\ \mathrm{Pa}4.0×103 Pa is the pressure itself, not the increase.
10.

Hard·Calculate[2 marks]

A sealed tank holds water with a surface pressure of 1.50×105 Pa1.50\times10^{5}\ \mathrm{Pa}1.50×105 Pa. Calculate the absolute pressure 2.0 m below the surface. Use ρ=1000 kg m−3\rho=1000\ \mathrm{kg\,m^{-3}}ρ=1000 kgm−3 and g=9.8 m s−2g=9.8\ \mathrm{m\,s^{-2}}g=9.8 ms−2.
Show answer and explanation

Answer: B · Worked explanation

The surface pressure is given, so P=P0+ρgh=1.50×105+(1000)(9.8)(2.0)=1.70×105 PaP=P_0+\rho g h=1.50\times10^{5}+(1000)(9.8)(2.0)=1.70\times10^{5}\ \mathrm{Pa}P=P0​+ρgh=1.50×105+(1000)(9.8)(2.0)=1.70×105 Pa. The value 1.2×105 Pa1.2\times10^{5}\ \mathrm{Pa}1.2×105 Pa wrongly uses atmospheric pressure for P0P_0P0​, although the tank's surface pressure is higher.

Keep going

Next topic8.3 Fluids and Newton's lawsPrevious topic8.1 Internal structure and density

More in Unit 8 · Fluids

  1. 8.1Internal structure and densityNotes · 10 questions
  2. 8.2PressureNotes · 10 questions
  3. 8.3Fluids and Newton's lawsNotes · 10 questions
  4. 8.4Fluids and conservation lawsNotes · 10 questions

All AP Physics 1 topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1Pressure describes how concentrated a force is
  2. 2Dividing the force by the area gives the pressure
  3. 3Fluid pressure increases as you go deeper
  4. 4At a given depth, the pressure is the same everywhere
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe

Absolute pressure in water against depth

Absolute pressure (kPa)05101520050100150200250300Depth below surface (m)
  • Absolute pressure in fresh water
  • 10 m deep