Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Physics 2
  3. ›10 Electric Force, Field and Potential
  4. ›10.2 Conservation of charge and charging

AP Physics 2 · Unit 10 · Electric Force, Field and Potential

10.2 Conservation of charge and charging

Explain the law of conservation of charge, and describe charging by friction, conduction, and induction using everyday examples.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Charge is never created or destroyed, only moved
  1. 1Charge is never created or destroyed, only moved
  2. 2Conductors let charge move while insulators hold it in place
  3. 3Friction and conduction charge objects by moving electrons directly
  4. 4Induction charges an object without touching it
  5. 5Everyday situations show the same three ways of moving charge
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Charge is never created or destroyed, only moved

Rub a plastic comb on wool and the comb picks up bits of paper. The comb has gained electrons, which carry negative charge. The wool has lost the same number.

This follows the law of conservation of charge. The total charge of an isolated system stays constant. Charge moves from place to place, but it is never created or destroyed.

In solid objects, it is the electrons that move. Protons stay fixed in the nuclei. Each electron carries charge −e-e−e, with e=1.60×10−19 Ce=1.60\times10^{-19}\,\mathrm{C}e=1.60×10−19C. An object turns negative by gaining electrons and positive by losing them.

Common mistake

A positively charged object has not gained protons. It has lost electrons.

Key term

law of conservation of charge

The law of conservation of charge states that the total charge of an isolated system, one exchanging no charge with its surroundings, is constant.

Part 1 done

2

Part 2 of 5: Conductors let charge move while insulators hold it in place

A charged comb keeps its charge, but a metal rod held in your hand does not. The difference is how freely charge can move through the material.

A conductor lets charge move easily through it. Metals are the standard example. An insulator holds charge near where it was placed. Plastic, glass, and rubber are typical insulators.

Excess charge on a conductor spreads out over its surface. Excess charge on an insulator stays put, which is why rubbing can leave charge behind in patches.

Key terms · tap one for its definition

conductor

A conductor is a material in which charges move freely, so added charge spreads through it; metals are the standard example.

insulator

An insulator is a material in which charges cannot move freely, so added charge stays near where it was placed.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the particles that move when a solid object becomes charged.
Show answer and explanation

Answer: C · Worked explanation

In solid objects, electrons transfer between materials, while protons stay fixed in the nuclei. A positive object has lost electrons rather than gained protons. Neutrons carry no charge, so moving them cannot charge an object, and nuclei remain in place inside the solid.
3

Part 3 of 5: Friction and conduction charge objects by moving electrons directly

Now consider how an object actually gets charged. Rubbing two materials together involves friction, the contact force that opposes sliding. The rubbing brings the surfaces into close contact, and electrons transfer from one material to the other.

One material ends up positive and the other negative, with equal amounts of charge. In charging by conduction, a charged object touches a neutral one and shares charge with it. Both end up with the same sign.

Two identical conducting spheres share their total charge equally when they touch.

Worked example

Sharing charge between two spheres

Two identical metal spheres carry +8.0 nC+8.0\,\mathrm{nC}+8.0nC and −2.0 nC-2.0\,\mathrm{nC}−2.0nC. They touch and are then separated. Determine the final charge on each sphere.
  1. 1
    Charge is conserved, so find the total: +8.0 nC+(−2.0 nC)=+6.0 nC+8.0\,\mathrm{nC}+(-2.0\,\mathrm{nC})=+6.0\,\mathrm{nC}+8.0nC+(−2.0nC)=+6.0nC.
  2. 2
    Identical conductors share equally: +6.0 nC2=+3.0 nC\frac{+6.0\,\mathrm{nC}}{2}=+3.0\,\mathrm{nC}2+6.0nC​=+3.0nC each.

Answer: Each sphere carries +3.0 nC+3.0\,\mathrm{nC}+3.0nC.

Key terms · tap one for its definition

friction

Friction is a contact force parallel to the touching surfaces that opposes sliding, or attempted sliding, between them.

charging by conduction

Charging by conduction is the transfer of charge between objects in direct contact, leaving both with charge of the same sign.

Part 3 done

4

Part 4 of 5: Induction charges an object without touching it

A charged rod can attract a neutral metal sphere without touching it. Electrons in the sphere shift, leaving the nearer side with charge opposite to the rod. The sphere is then attracted.

The method of charging by induction uses this shift to leave a net charge. It needs a path to the ground. Connecting a conductor to Earth, called grounding, lets charge flow freely. Suppose a negative rod is held near a neutral sphere on an insulating stand.

  • Bring the rod near the sphere without touching it.
  • Connect the sphere to ground while the rod stays near.
  • Disconnect the ground connection.
  • Remove the rod.

Repelled electrons flow to ground and cannot return. The sphere keeps a net charge opposite to the rod’s. The rod itself keeps its charge.

Exam tip

In an induction answer, say where the electrons go and why the final charge is opposite to the rod’s.

Key terms · tap one for its definition

charging by induction

Charging by induction is giving an object a net charge, opposite to that of a nearby charged object, without any contact between them.

grounding

Grounding is connecting an object to Earth by a conductor, so that charge can flow freely between them.

Part 4 done

Quick check

One question on the part you just read

Easy

A rod becomes positively charged when rubbed with a cloth. Predict the charge on the cloth.
Show answer and explanation

Answer: A · Worked explanation

Charge is conserved, so the cloth must carry the opposite charge to the rod. The rod lost electrons, and the cloth gained them, so the cloth is negative. The cloth does not lose protons. It does not stay neutral, since equal and opposite charges appear on the two materials. Gaining electrons gives negative charge, not positive.
5

Part 5 of 5: Everyday situations show the same three ways of moving charge

Now compare the three methods and spot them in daily life. Each one moves electrons, but in a different way.

Three ways to charge an object

MethodContact?Final chargeExample
FrictionRubbingOpposite signs on the two materialsBalloon rubbed on hair
ConductionTouchingSame sign as the charged objectCharged rod touches a metal sphere
InductionNo touchingOpposite sign to the nearby objectGrounded sphere near a charged rod
Method
Friction
Contact?
Rubbing
Final charge
Opposite signs on the two materials
Example
Balloon rubbed on hair
Method
Conduction
Contact?
Touching
Final charge
Same sign as the charged object
Example
Charged rod touches a metal sphere
Method
Induction
Contact?
No touching
Final charge
Opposite sign to the nearby object
Example
Grounded sphere near a charged rod

Walking across carpet transfers electrons by rubbing. Touching a metal doorknob then lets extra charge flow through the contact, and you feel a small shock. Clothes cling after a dryer for a similar reason.

A touched sphere ends with the same sign as the rod, while a grounded sphere ends with the opposite sign. That difference helps you identify the method. In every case, total charge stays constant.

Note read

Check your recall[12 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Describe[2 marks]

    Describe what the law of conservation of charge states.

    Show mark schemeHide mark scheme

    Model answer

    The total charge of an isolated system stays constant. Charge can move from one object to another but is never created or destroyed.

    • 1 mark for stating that the total charge of an isolated system is constant
    • 1 mark for stating that charge is transferred, not created or destroyed
  2. 2.Explain[3 marks]

    Explain how rubbing a plastic rod with wool can leave the rod negatively charged and the wool positively charged.

    Show mark schemeHide mark scheme

    Model answer

    Rubbing brings the surfaces into contact, and electrons transfer from the wool to the rod. The rod gains electrons and becomes negative. The wool loses the same number and becomes positive.

    • 1 mark for stating that electrons transfer between the materials
    • 1 mark for stating that the rod gains electrons and becomes negative
    • 1 mark for stating that the wool loses electrons and becomes positive
  3. 3.Determine[2 marks]

    Two identical metal spheres carry +9.0 nC+9.0\,\mathrm{nC}+9.0nC and −3.0 nC-3.0\,\mathrm{nC}−3.0nC. They touch and are separated. Determine the final charge on each.

    Show mark schemeHide mark scheme

    Model answer

    The total is +6.0 nC+6.0\,\mathrm{nC}+6.0nC. Identical spheres share equally, so each carries +3.0 nC+3.0\,\mathrm{nC}+3.0nC.

    • 1 mark for finding the total charge of +6.0 nC+6.0\,\mathrm{nC}+6.0nC
    • 1 mark for dividing equally to obtain +3.0 nC+3.0\,\mathrm{nC}+3.0nC on each sphere
  4. 4.Describe[4 marks]

    Describe the steps that charge a neutral metal sphere positively by induction using a negatively charged rod.

    Show mark schemeHide mark scheme

    Model answer

    Bring the negative rod near the sphere without touching it. Connect the sphere to ground while the rod is near, so electrons flow to ground. Disconnect the ground, then remove the rod.

    • 1 mark for bringing the rod near without touching
    • 1 mark for connecting the sphere to ground while the rod is near
    • 1 mark for disconnecting the ground before removing the rod
    • 1 mark for removing the rod, leaving the sphere positive
  5. 5.Identify[1 mark]

    Identify the method of charging when a charged rod touches a neutral metal sphere and the sphere takes the same sign of charge as the rod.

    Show mark schemeHide mark scheme

    Model answer

    Charging by conduction.

    • 1 mark for identifying conduction

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

Identify the material that is the best insulator.
Show answer and explanation

Answer: B · Worked explanation

Rubber holds charge in place because its charges cannot move freely. Copper, aluminum, and iron are metals, which are conductors, so any charge added to them spreads out and can flow away. That is why metals are poor choices for holding a charge in place.
4.

Medium·Determine[2 marks]

Two identical conducting spheres carry −5.0 nC-5.0\,\mathrm{nC}−5.0nC and +1.0 nC+1.0\,\mathrm{nC}+1.0nC. They touch and are then separated. Determine the final charge on each sphere.
Show answer and explanation

Answer: D · Worked explanation

The total charge is −5.0 nC+1.0 nC=−4.0 nC-5.0\,\mathrm{nC}+1.0\,\mathrm{nC}=-4.0\,\mathrm{nC}−5.0nC+1.0nC=−4.0nC, and identical spheres share it equally, giving −2.0 nC-2.0\,\mathrm{nC}−2.0nC each. The value −3.0 nC-3.0\,\mathrm{nC}−3.0nC averages the magnitudes and ignores signs. The value −4.0 nC-4.0\,\mathrm{nC}−4.0nC is the total, not the share, and the positive value has the wrong sign.
5.

Medium·Calculate[2 marks]

An object gains −8.0×10−9 C-8.0\times10^{-9}\,\mathrm{C}−8.0×10−9C of charge by gaining electrons. Calculate the number of electrons gained, using e=1.60×10−19 Ce=1.60\times10^{-19}\,\mathrm{C}e=1.60×10−19C.
Show answer and explanation

Answer: A · Worked explanation

The number is n=8.0×10−9 C1.60×10−19 C=5.0×1010n=\frac{8.0\times10^{-9}\,\mathrm{C}}{1.60\times10^{-19}\,\mathrm{C}}=5.0\times10^{10}n=1.60×10−19C8.0×10−9C​=5.0×1010 electrons. The value 2.0×10−112.0\times10^{-11}2.0×10−11 comes from inverting the fraction. The value 5.0×1095.0\times10^{9}5.0×109 has an exponent slip of one power of ten. The value 8.0×10−98.0\times10^{-9}8.0×10−9 is the charge itself, not a count of electrons, so it skips the division by eee.
6.

Medium·Predict[2 marks]

A positively charged rod is brought near, without touching, a neutral metal sphere on an insulating stand. Predict how charge is arranged on the sphere.
Show answer and explanation

Answer: B · Worked explanation

The positive rod attracts electrons in the sphere toward the near side, leaving the far side positive. The sphere stays neutral overall because no charge enters or leaves. The whole sphere does not turn positive without contact. The reversed arrangement has the signs the wrong way round, and unchanged charge ignores the nearby rod.
7.

Medium·Explain[2 marks]

In charging by induction, the ground connection is removed before the rod. Explain why.
Show answer and explanation

Answer: C · Worked explanation

While the ground is connected, electrons can move freely between the sphere and Earth. Removing the rod first would let the charge flow back and the sphere would end neutral. Disconnecting the ground traps the net charge on the sphere. The rod does not lose charge, since it never touches the sphere, and the electrons do leave while the ground is connected.
8.

Hard·Predict[2 marks]

A negative rod charges a neutral metal sphere by induction, with grounding. Predict the final charge on the sphere and the reason.
Show answer and explanation

Answer: D · Worked explanation

The negative rod repels electrons in the sphere, and they flow to ground. When the ground is disconnected, the sphere has lost electrons and so is positive. Electrons do not flow from the ground, since the rod’s repulsion drives them away. Protons do not move in a solid. The rod never touches the sphere, so it gives no charge.
9.

Hard·Determine[2 marks]

Three identical conducting spheres start with +6.0 nC+6.0\,\mathrm{nC}+6.0nC, 0, and 0. The first touches the second and they are separated. The second then touches the third and they are separated. Determine the final charge on the third sphere.
Show answer and explanation

Answer: B · Worked explanation

The first and second share +6.0 nC+6.0\,\mathrm{nC}+6.0nC equally, giving +3.0 nC+3.0\,\mathrm{nC}+3.0nC each. The second and third then share the second’s +3.0 nC+3.0\,\mathrm{nC}+3.0nC, so the third has +1.5 nC+1.5\,\mathrm{nC}+1.5nC. The value +2.0 nC+2.0\,\mathrm{nC}+2.0nC wrongly divides the original total among three spheres, though the first sphere never touches the third.
10.

Hard·Identify[2 marks]

A sphere is charged by induction using a charged rod. Identify the correct statement about the rod afterward.
Show answer and explanation

Answer: A · Worked explanation

In induction, the rod only sits near the sphere. The sphere’s charge comes from the ground, not the rod, so the rod keeps its original charge. A loss of charge equal to the sphere’s would describe conduction, which needs contact. The rod does not become neutral, and its charge cannot double, since no charge is created.

Keep going

Next topic10.3 Electric fieldsPrevious topic10.1 Electric charge and electric force

More in Unit 10 · Electric Force, Field and Potential

  1. 10.1Electric charge and electric forceNotes · 10 questions
  2. 10.2Conservation of charge and chargingNotes · 10 questions
  3. 10.3Electric fieldsNotes · 10 questions
  4. 10.4Electric potential energyNotes · 10 questions
  5. 10.5Electric potentialNotes · 10 questions
  6. 10.6CapacitorsNotes · 10 questions
  7. 10.7Conservation of electric energyNotes · 10 questions

All AP Physics 2 topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/5 read

  1. 1Charge is never created or destroyed, only moved
  2. 2Conductors let charge move while insulators hold it in place
  3. 3Friction and conduction charge objects by moving electrons directly
  4. 4Induction charges an object without touching it
  5. 5Everyday situations show the same three ways of moving charge
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe