Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Physics 2
  3. ›10 Electric Force, Field and Potential
  4. ›10.5 Electric potential

AP Physics 2 · Unit 10 · Electric Force, Field and Potential

10.5 Electric potential

Define electric potential and its units, calculate the potential of a point charge, and compare potentials at different points.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Electric potential is potential energy per unit charge
  1. 1Electric potential is potential energy per unit charge
  2. 2A point charge sets the potential at every distance
  3. 3Potentials from several charges add as signed numbers
  4. 4Moving between points of different potential changes the energy
  5. 5Potential changes steadily along a uniform field
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Electric potential is potential energy per unit charge

Think of a hill. Its height tells you the energy per kilogram that any rock would have there, whatever the rock’s mass. Electric potential does the same job for charge.

Place a test charge qqq at a point in a field, and let its potential energy be UEU_EUE​. The electric potential at that point is V=UEqV=\frac{U_E}{q}V=qUE​​.

The unit of potential is the volt. The units show the pattern: joules divided by coulombs.

Potential has a sign but no direction. Differences matter most. The potential difference between two points is ΔV=ΔUEq\Delta V=\frac{\Delta U_E}{q}ΔV=qΔUE​​.

Common mistake

Potential is not energy. A larger charge at the same point has more potential energy, but the potential there is unchanged.

Key terms · tap one for its definition

electric potential

The electric potential VVV at a point is the electric potential energy per unit charge there, V=UE/qV=U_E/qV=UE​/q, measured in volts.

volt

The volt, symbol V\mathrm{V}V, is the SI unit of electric potential, equal to one joule per coulomb.

potential difference

The potential difference between two points is the change in electric potential, ΔV=Vf−Vi\Delta V=V_\mathrm{f}-V_\mathrm{i}ΔV=Vf​−Vi​, measured in volts.

Part 1 done

2

Part 2 of 5: A point charge sets the potential at every distance

Now find the potential near a source. A point charge QQQ makes a potential V=kQrV=\frac{kQ}{r}V=rkQ​ at distance rrr. Here k=9.0×109 N m2/C2k=9.0\times10^9\,\mathrm{N\,m^2/C^2}k=9.0×109Nm2/C2, as for the field.

This takes V=0V=0V=0 at infinite distance. A positive source gives positive potential. A negative source gives negative potential.

Unlike the field, the potential falls as 1r\frac{1}{r}r1​, not 1r2\frac{1}{r^2}r21​. Doubling the distance halves the potential. It also has no direction.

Figure 1. Potential against distance for a +5.0 nC and a −5.0 nC point charge. Both curves approach zero far from the charge.

Worked example

Potential at two distances

A point charge Q=+5.0×10−9 CQ=+5.0\times10^{-9}\,\mathrm{C}Q=+5.0×10−9C is the only source. Determine the potential at 0.30 m and at 0.60 m. Then find ΔV\Delta VΔV from the nearer point to the farther one.
  1. 1
    Use V=kQrV=\frac{kQ}{r}V=rkQ​ at each distance.
  2. 2
    Find the product: kQ=(9.0×109 N m2/C2)(5.0×10−9 C)=45 V mkQ=(9.0\times10^9\,\mathrm{N\,m^2/C^2})(5.0\times10^{-9}\,\mathrm{C})=45\,\mathrm{V\,m}kQ=(9.0×109Nm2/C2)(5.0×10−9C)=45Vm.
  3. 3
    At 0.30 m: V=45 V m0.30 m=150 VV=\frac{45\,\mathrm{V\,m}}{0.30\,\mathrm{m}}=150\,\mathrm{V}V=0.30m45Vm​=150V.
  4. 4
    At 0.60 m: V=45 V m0.60 m=75 VV=\frac{45\,\mathrm{V\,m}}{0.60\,\mathrm{m}}=75\,\mathrm{V}V=0.60m45Vm​=75V.
  5. 5
    Subtract, final minus initial: ΔV=75 V−150 V=−75 V\Delta V=75\,\mathrm{V}-150\,\mathrm{V}=-75\,\mathrm{V}ΔV=75V−150V=−75V.

Answer: The potentials are 150 V and 75 V, so ΔV=−75 V\Delta V=-75\,\mathrm{V}ΔV=−75V.

The potential is lower farther from the positive charge. That fall is the first step in comparing points, and it shows why the sign of ΔV\Delta VΔV matters.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the quantity that is equal to one volt.
Show answer and explanation

Answer: C · Worked explanation

Potential is potential energy per unit charge, so a volt is a joule per coulomb. A newton per coulomb is the unit of electric field, a different quantity. A coulomb per joule inverts the ratio, and a joule per newton is simply a distance.
3

Part 3 of 5: Potentials from several charges add as signed numbers

Several sources are common. Each charge produces its own potential at a point. Add them as ordinary numbers, keeping each sign. No vector components are needed.

Take a midpoint 0.20 m from a +4.0 nC+4.0\,\mathrm{nC}+4.0nC charge and 0.20 m from a −4.0 nC-4.0\,\mathrm{nC}−4.0nC charge. Each contributes kQr=(9.0×109)(4.0×10−9)0.20\frac{kQ}{r}=\frac{(9.0\times10^9)(4.0\times10^{-9})}{0.20}rkQ​=0.20(9.0×109)(4.0×10−9)​, which has size 180 V. The contributions are +180 V and −180 V.

The sum is zero, so the potential at that point is zero. The field there is not zero, because both field arrows point toward the negative charge.

Two equal positive charges show the reverse pattern. At the midpoint the potential is positive, but the fields cancel.

Common mistake

Zero potential does not mean zero field. Potential adds as numbers, but the field adds as vectors.

Part 3 done

4

Part 4 of 5: Moving between points of different potential changes the energy

Potential links back to potential energy. Rearranging V=UEqV=\frac{U_E}{q}V=qUE​​ gives ΔUE=qΔV\Delta U_E=q\Delta VΔUE​=qΔV. Here ΔV\Delta VΔV is the potential difference, final minus initial. Keep the sign of qqq. A larger ΔV\Delta VΔV means a larger energy change per unit charge.

A positive charge gains potential energy when it moves to higher potential. A negative charge does the opposite.

Where released charges tend to move

ChargeTends to move towardIts UEU_EUE​ then
PositiveLower potentialDecreases
NegativeHigher potentialDecreases
Charge
Positive
Tends to move toward
Lower potential
Its UEU_EUE​ then
Decreases
Charge
Negative
Tends to move toward
Higher potential
Its UEU_EUE​ then
Decreases

Charges released from rest tend to lower their potential energy. That is why the direction depends on the sign of the charge.

Worked example

Energy change between two points

A +2.0 μC+2.0\,\mu\mathrm{C}+2.0μC charge moves between the two points of the example above. There, ΔV=−75 V\Delta V=-75\,\mathrm{V}ΔV=−75V. Determine ΔUE\Delta U_EΔUE​.
  1. 1
    Use ΔUE=qΔV\Delta U_E=q\Delta VΔUE​=qΔV.
  2. 2
    Substitute: ΔUE=(2.0×10−6 C)(−75 V)\Delta U_E=(2.0\times10^{-6}\,\mathrm{C})(-75\,\mathrm{V})ΔUE​=(2.0×10−6C)(−75V).
  3. 3
    Calculate: ΔUE=−1.5×10−4 J\Delta U_E=-1.5\times10^{-4}\,\mathrm{J}ΔUE​=−1.5×10−4J.

Answer: ΔUE=−1.5×10−4 J\Delta U_E=-1.5\times10^{-4}\,\mathrm{J}ΔUE​=−1.5×10−4J, so the charge loses potential energy.

A −2.0 μC-2.0\,\mu\mathrm{C}−2.0μC charge moved between the same points would gain 1.5×10−4 J1.5\times10^{-4}\,\mathrm{J}1.5×10−4J instead.

Part 4 done

Quick check

One question on the part you just read

Easy

Identify the best description of the electric potential at a point.
Show answer and explanation

Answer: D · Worked explanation

Electric potential is the electric potential energy per unit charge at a point, V=UEqV=\frac{U_E}{q}V=qUE​​. Force per unit charge describes the electric field instead. The total charge of the source and its own energy are not what the definition measures.
5

Part 5 of 5: Potential changes steadily along a uniform field

Now return to a field that has the same size and direction everywhere, such as the field between parallel plates. Moving a distance ddd along the field changes the potential by a fixed amount.

The field points from high potential to low potential. Its magnitude is E=∣ΔV∣dE=\frac{|\Delta V|}{d}E=d∣ΔV∣​. So the field can be given in volts per meter, and 1 V/m=1 N/C1\,\mathrm{V/m}=1\,\mathrm{N/C}1V/m=1N/C.

For example, a field of 2.0×103 V/m2.0\times10^{3}\,\mathrm{V/m}2.0×103V/m drops the potential by 100 V over 0.050 m.

Near a positive point charge, potential is high. Near a negative one, it is low. Comparing two points then comes down to which is closer to each source.

Note read

Check your recall[12 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Describe[2 marks]

    Describe what is meant by electric potential at a point, including its unit.

    Show mark schemeHide mark scheme

    Model answer

    Electric potential at a point is the electric potential energy per unit charge of a test charge placed there. Its unit is the volt, equal to one joule per coulomb.

    • 1 mark for stating that it is potential energy per unit charge
    • 1 mark for giving the unit as the volt, or joule per coulomb
  2. 2.Calculate[3 marks]

    Calculate the electric potential 0.090 m from a point charge of −2.0×10−9 C-2.0\times10^{-9}\,\mathrm{C}−2.0×10−9C.

    Show mark schemeHide mark scheme

    Model answer

    V=kQr=(9.0×109)(−2.0×10−9)0.090=−2.0×102 VV=\frac{kQ}{r}=\frac{(9.0\times10^9)(-2.0\times10^{-9})}{0.090}=-2.0\times10^{2}\,\mathrm{V}V=rkQ​=0.090(9.0×109)(−2.0×10−9)​=−2.0×102V.

    • 1 mark for using V=kQrV=\frac{kQ}{r}V=rkQ​
    • 1 mark for substituting the values with the negative sign
    • 1 mark for obtaining −2.0×102 V-2.0\times10^{2}\,\mathrm{V}−2.0×102V
  3. 3.Explain[3 marks]

    Explain why the potential can be zero at the midpoint between equal and opposite charges while the field there is not zero.

    Show mark schemeHide mark scheme

    Model answer

    Potentials are signed numbers that add, and equal and opposite contributions cancel to zero. Fields are vectors. At the midpoint both fields point toward the negative charge, so they add rather than cancel.

    • 1 mark for stating that potentials add as signed numbers and cancel
    • 1 mark for stating that fields add as vectors
    • 1 mark for explaining that both fields point the same way at the midpoint, so the net field is not zero
  4. 4.Determine[2 marks]

    Determine the change in electric potential energy when a 3.0×10−6 C3.0\times10^{-6}\,\mathrm{C}3.0×10−6C charge moves to a point where the potential is 40 V higher.

    Show mark schemeHide mark scheme

    Model answer

    ΔUE=qΔV=(3.0×10−6 C)(+40 V)=+1.2×10−4 J\Delta U_E=q\Delta V=(3.0\times10^{-6}\,\mathrm{C})(+40\,\mathrm{V})=+1.2\times10^{-4}\,\mathrm{J}ΔUE​=qΔV=(3.0×10−6C)(+40V)=+1.2×10−4J.

    • 1 mark for using ΔUE=qΔV\Delta U_E=q\Delta VΔUE​=qΔV
    • 1 mark for obtaining +1.2×10−4 J+1.2\times10^{-4}\,\mathrm{J}+1.2×10−4J
  5. 5.Predict[2 marks]

    Predict whether a positive charge released from rest in an electric field moves toward higher or lower potential, and give a reason.

    Show mark schemeHide mark scheme

    Model answer

    It moves toward lower potential. Released charges tend to lower their potential energy, and for a positive charge a drop in potential lowers the energy.

    • 1 mark for predicting movement toward lower potential
    • 1 mark for explaining that the charge’s potential energy decreases

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

A single negative point charge produces a potential that is zero at infinite distance. Identify the sign of the potential near the charge.
Show answer and explanation

Answer: A · Worked explanation

The formula V=kQrV=\frac{kQ}{r}V=rkQ​ has the sign of QQQ, because kkk and rrr are positive. A negative source charge gives a negative potential at every distance. The potential approaches zero only far away, and it never changes sign.
4.

Medium·Calculate[2 marks]

Calculate the electric potential 0.45 m from a point charge of +6.0×10−9 C+6.0\times10^{-9}\,\mathrm{C}+6.0×10−9C.
Show answer and explanation

Answer: B · Worked explanation

V=kQr=(9.0×109)(6.0×10−9)0.45=120 VV=\frac{kQ}{r}=\frac{(9.0\times10^9)(6.0\times10^{-9})}{0.45}=120\,\mathrm{V}V=rkQ​=0.45(9.0×109)(6.0×10−9)​=120V. The value 270 V comes from dividing by r2r^2r2, which is the field’s dependence on distance. The value 24 V comes from multiplying by rrr rather than dividing. The value 54 V leaves out the distance altogether.
5.

Medium·Determine[2 marks]

A −2.0×10−6 C-2.0\times10^{-6}\,\mathrm{C}−2.0×10−6C charge moves to a point where the potential is 50 V higher. Determine the change in its electric potential energy.
Show answer and explanation

Answer: D · Worked explanation

ΔUE=qΔV=(−2.0×10−6 C)(+50 V)=−1.0×10−4 J\Delta U_E=q\Delta V=(-2.0\times10^{-6}\,\mathrm{C})(+50\,\mathrm{V})=-1.0\times10^{-4}\,\mathrm{J}ΔUE​=qΔV=(−2.0×10−6C)(+50V)=−1.0×10−4J. A negative charge loses potential energy when it moves to higher potential. The value −4.0×10−8 J-4.0\times10^{-8}\,\mathrm{J}−4.0×10−8J results from dividing the charge by the potential difference. Always keep the sign of the charge when multiplying. The positive value of the same size would describe a positive charge instead.
6.

Medium·Determine[2 marks]

Determine the electric potential at the midpoint of two point charges, +4.0×10−9 C+4.0\times10^{-9}\,\mathrm{C}+4.0×10−9C and −4.0×10−9 C-4.0\times10^{-9}\,\mathrm{C}−4.0×10−9C, that are 0.40 m apart.
Show answer and explanation

Answer: C · Worked explanation

Each charge is 0.20 m away and contributes ±(9.0×109)(4.0×10−9)0.20=±180 V\pm\frac{(9.0\times10^9)(4.0\times10^{-9})}{0.20}=\pm180\,\mathrm{V}±0.20(9.0×109)(4.0×10−9)​=±180V. Potentials add as signed numbers, so the total is 0 V0\,\mathrm{V}0V. The value 360 V adds the magnitudes and ignores that one contribution is negative. The values 180 V and −180 V are the separate contributions.
7.

Medium·Compare[1 mark]

A positive point charge is the only source. Point P is 0.20 m from it and point R is 0.50 m from it. Compare the potentials at P and R.
Show answer and explanation

Answer: B · Worked explanation

V=kQrV=\frac{kQ}{r}V=rkQ​ is positive and decreases with distance, so the nearer point P has the higher potential. Potential is defined per unit charge, so no test charge is needed to compare points. Equal values would require equal distances from the source.
8.

Hard·Determine[2 marks]

A +1.0×10−9 C+1.0\times10^{-9}\,\mathrm{C}+1.0×10−9C test charge is moved from 0.30 m to 0.10 m from a fixed +5.0×10−9 C+5.0\times10^{-9}\,\mathrm{C}+5.0×10−9C point charge. Determine the change in the test charge’s electric potential energy.
Show answer and explanation

Answer: A · Worked explanation

Vi=450.30=150 VV_\mathrm{i}=\frac{45}{0.30}=150\,\mathrm{V}Vi​=0.3045​=150V and Vf=450.10=450 VV_\mathrm{f}=\frac{45}{0.10}=450\,\mathrm{V}Vf​=0.1045​=450V, so ΔV=+300 V\Delta V=+300\,\mathrm{V}ΔV=+300V and ΔUE=qΔV=+3.0×10−7 J\Delta U_E=q\Delta V=+3.0\times10^{-7}\,\mathrm{J}ΔUE​=qΔV=+3.0×10−7J. The value +4.5×10−7 J+4.5\times10^{-7}\,\mathrm{J}+4.5×10−7J uses only the final potential instead of the change. Using only the initial potential gives +1.5×10−7 J+1.5\times10^{-7}\,\mathrm{J}+1.5×10−7J, which ignores the final point.
9.

Hard·Predict[2 marks]

A negative charge is released from rest in an electric field and moves under the electric force alone. Predict how its potential changes along its path and what happens to its electric potential energy.
Show answer and explanation

Answer: D · Worked explanation

Free charges move so that their potential energy falls. For a negative charge, UE=qVU_E=qVUE​=qV falls when VVV rises, so it moves toward higher potential. Positive charges move toward lower potential. A rise in energy contradicts release from rest under the electric force alone.
10.

Hard·Compare[2 marks]

Two equal positive point charges are fixed some distance apart. Compare the electric potential and the electric field at the midpoint between them.
Show answer and explanation

Answer: C · Worked explanation

Both potentials are positive, so they add and the total is not zero. The two field vectors point in opposite directions with equal size, so they cancel. Zero potential with a nonzero field occurs for equal and opposite charges, which is the reverse pattern.

Keep going

Next topic10.6 CapacitorsPrevious topic10.4 Electric potential energy

More in Unit 10 · Electric Force, Field and Potential

  1. 10.1Electric charge and electric forceNotes · 10 questions
  2. 10.2Conservation of charge and chargingNotes · 10 questions
  3. 10.3Electric fieldsNotes · 10 questions
  4. 10.4Electric potential energyNotes · 10 questions
  5. 10.5Electric potentialNotes · 10 questions
  6. 10.6CapacitorsNotes · 10 questions
  7. 10.7Conservation of electric energyNotes · 10 questions

All AP Physics 2 topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/5 read

  1. 1Electric potential is potential energy per unit charge
  2. 2A point charge sets the potential at every distance
  3. 3Potentials from several charges add as signed numbers
  4. 4Moving between points of different potential changes the energy
  5. 5Potential changes steadily along a uniform field
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe

Potential near point charges

Potential V (V)00.20.40.60.81-400-2000200400Distance r (m)
  • +5.0 nC charge
  • −5.0 nC charge