Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Physics 2
  3. ›10 Electric Force, Field and Potential
  4. ›10.6 Capacitors

AP Physics 2 · Unit 10 · Electric Force, Field and Potential

10.6 Capacitors

Describe how a capacitor is built and works, calculate parallel plate capacitance, and explain how a capacitor stores and releases energy.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5A capacitor stores charge on two nearby conductors
  1. 1A capacitor stores charge on two nearby conductors
  2. 2Capacitance measures the charge stored per volt
  3. 3Plate area, gap and dielectric set the capacitance
  4. 4A charged capacitor stores energy in its electric field
  5. 5A capacitor releases its energy when a circuit is connected
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: A capacitor stores charge on two nearby conductors

A camera flash needs a large burst of energy in a short time. A battery alone cannot supply it that fast. A capacitor stores energy first, then delivers it quickly.

The simplest design is a parallel plate capacitor. It has two flat metal plates facing each other, separated by a small gap. The gap holds vacuum or an insulating material.

Connect the plates to a battery. Charge moves until one plate holds +Q+Q+Q and the other holds −Q-Q−Q. The capacitor as a whole remains neutral.

Figure 1. Equal and opposite charges on the plates create an electric field in the gap between them.

The plates do not touch, so charge cannot cross the gap. An electric field fills the space between them.

Key terms · tap one for its definition

capacitor

A capacitor is a device of two conductors separated by an insulator or vacuum that stores energy as separated charge.

parallel plate capacitor

A parallel plate capacitor is a capacitor made of two flat, parallel conducting plates of equal area separated by a small gap.

Part 1 done

2

Part 2 of 5: Capacitance measures the charge stored per volt

How much charge a capacitor holds depends on the potential difference across it. Doubling the difference doubles the charge. Their ratio stays fixed.

That ratio is the capacitance, C=QΔVC=\frac{Q}{\Delta V}C=ΔVQ​. Here QQQ is the magnitude of the charge on either plate. ΔV\Delta VΔV is the potential difference across the plates.

Capacitance is measured in farads. Most practical capacitors are far smaller than one farad.

Exam tip

Here CCC in italics means capacitance. The upright C\mathrm{C}C is the unit coulomb. Name the quantity in words when both appear.

Worked example

Finding a capacitance

A capacitor holds 6.0 μC on one plate when the potential difference across it is 12 V. Calculate its capacitance.
  1. 1
    Capacitance equals charge divided by potential difference: C=QΔVC=\frac{Q}{\Delta V}C=ΔVQ​.
  2. 2
    Convert the charge: Q=6.0×10−6 CQ=6.0\times10^{-6}\,\mathrm{C}Q=6.0×10−6C.
  3. 3
    Substitute: C=6.0×10−6 C12 VC=\frac{6.0\times10^{-6}\,\mathrm{C}}{12\,\mathrm{V}}C=12V6.0×10−6C​.
  4. 4
    Calculate: C=5.0×10−7 FC=5.0\times10^{-7}\,\mathrm{F}C=5.0×10−7F.

Answer: C=5.0×10−7 FC=5.0\times10^{-7}\,\mathrm{F}C=5.0×10−7F, which is 0.50 μF.

Key terms · tap one for its definition

capacitance

The capacitance CCC of a capacitor is the charge on either plate per unit potential difference, C=Q/ΔVC=Q/\Delta VC=Q/ΔV, measured in farads.

farads

The farad, symbol F\mathrm{F}F, is the unit of capacitance, equal to one coulomb per volt.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the best description of a parallel plate capacitor.
Show answer and explanation

Answer: D · Worked explanation

A parallel plate capacitor has two flat conducting plates held parallel with a small gap, filled by vacuum or an insulator. Insulating plates cannot hold the separated charge in the same way. Joining the plates with a metal bar would let the opposite charges cancel.
3

Part 3 of 5: Plate area, gap and dielectric set the capacitance

The shape of a capacitor sets its capacitance. For a parallel plate capacitor with plate area AAA and gap ddd, C=κε0AdC=\kappa\varepsilon_0\frac{A}{d}C=κε0​dA​.

Here ε0=8.85×10−12 C2/(N m2)\varepsilon_0=8.85\times10^{-12}\,\mathrm{C^2/(N\,m^2)}ε0​=8.85×10−12C2/(Nm2) is a constant. The factor κ\kappaκ is the dielectric constant of the material between the plates. For vacuum, κ=1\kappa=1κ=1.

A dielectric is an insulating material placed in the gap. Any dielectric has κ>1\kappa>1κ>1, so it raises the capacitance.

A larger area holds more charge per volt. A smaller gap raises the capacitance because opposite charges on the plates sit closer.

Worked example

Capacitance of parallel plates

A vacuum parallel plate capacitor has plate area 0.040 m20.040\,\mathrm{m^2}0.040m2 and gap 1.0×10−3 m1.0\times10^{-3}\,\mathrm{m}1.0×10−3m. Calculate its capacitance.
  1. 1
    Use C=κε0AdC=\kappa\varepsilon_0\frac{A}{d}C=κε0​dA​ with κ=1\kappa=1κ=1.
  2. 2
    Substitute: C=(8.85×10−12 C2/(N m2))(0.040 m2)1.0×10−3 mC=\frac{(8.85\times10^{-12}\,\mathrm{C^2/(N\,m^2)})(0.040\,\mathrm{m^2})}{1.0\times10^{-3}\,\mathrm{m}}C=1.0×10−3m(8.85×10−12C2/(Nm2))(0.040m2)​.
  3. 3
    Calculate: C=3.54×10−10 FC=3.54\times10^{-10}\,\mathrm{F}C=3.54×10−10F.

Answer: C≈3.5×10−10 FC\approx3.5\times10^{-10}\,\mathrm{F}C≈3.5×10−10F.

Key terms · tap one for its definition

dielectric constant

The dielectric constant κ\kappaκ is the unitless factor by which a dielectric multiplies the capacitance compared with vacuum.

dielectric

A dielectric is an insulating material placed between the plates of a capacitor to raise its capacitance.

Part 3 done

4

Part 4 of 5: A charged capacitor stores energy in its electric field

Charging a capacitor takes work. Each bit of charge moved to a plate must overcome the field of the charge already there. The work done becomes stored energy.

The potential difference rises as charge builds up. So the stored energy is not QΔVQ\Delta VQΔV. It is half of that: UC=12QΔVU_C=\frac{1}{2}Q\Delta VUC​=21​QΔV.

Using Q=CΔVQ=C\Delta VQ=CΔV gives two more forms: UC=12C(ΔV)2=Q22CU_C=\frac{1}{2}C(\Delta V)^2=\frac{Q^2}{2C}UC​=21​C(ΔV)2=2CQ2​. Choose the form that matches the given data.

Common mistake

Do not use UC=QΔVU_C=Q\Delta VUC​=QΔV. The potential difference is not constant during charging, so that form overstates the energy by a factor of two.

Worked example

Energy stored in a capacitor

A 0.50 μF capacitor is charged to 12 V. Determine the energy stored.
  1. 1
    Use UC=12C(ΔV)2U_C=\frac{1}{2}C(\Delta V)^2UC​=21​C(ΔV)2.
  2. 2
    Substitute: UC=12(5.0×10−7 F)(12 V)2U_C=\frac{1}{2}(5.0\times10^{-7}\,\mathrm{F})(12\,\mathrm{V})^2UC​=21​(5.0×10−7F)(12V)2.
  3. 3
    Calculate: UC=12(5.0×10−7)(144) J=3.6×10−5 JU_C=\frac{1}{2}(5.0\times10^{-7})(144)\,\mathrm{J}=3.6\times10^{-5}\,\mathrm{J}UC​=21​(5.0×10−7)(144)J=3.6×10−5J.

Answer: UC=3.6×10−5 JU_C=3.6\times10^{-5}\,\mathrm{J}UC​=3.6×10−5J.

Part 4 done

Quick check

One question on the part you just read

Easy

Identify the quantity that is equal to one farad.
Show answer and explanation

Answer: B · Worked explanation

Capacitance is C=QΔVC=\frac{Q}{\Delta V}C=ΔVQ​, so one farad is one coulomb per volt. One volt per coulomb inverts the ratio. One joule per coulomb is the volt, the unit of potential difference, which is a different quantity. Keeping track of which quantity sits on the top of the ratio avoids this confusion.
5

Part 5 of 5: A capacitor releases its energy when a circuit is connected

A charged capacitor holds its energy until its plates are connected through a circuit. Then charge flows from one plate, through the circuit, to the other.

This flow is called discharge. The energy leaves the capacitor and goes to other parts of the circuit. A lamp, for example, gives off light and thermal energy.

As charge leaves, QQQ falls. So do ΔV\Delta VΔV and the stored energy. The flow is fastest at the start.

This is how a camera flash works. The capacitor charges slowly from a battery and then discharges in a brief burst.

Go deeperWhat changes when the gap or dielectric changes

Suppose a capacitor stays connected to a battery. Then ΔV\Delta VΔV is fixed, so Q=CΔVQ=C\Delta VQ=CΔV follows any change in CCC. A dielectric raises CCC, and the battery supplies the extra charge.

Suppose the battery is disconnected first. Then QQQ is fixed, so ΔV=QC\Delta V=\frac{Q}{C}ΔV=CQ​ changes as CCC changes. Inserting a dielectric lowers ΔV\Delta VΔV and the stored energy Q22C\frac{Q^2}{2C}2CQ2​.

Key term

discharge

Discharge is the process in which a capacitor’s stored charge flows through a circuit, reducing QQQ, ΔV\Delta VΔV and UCU_CUC​.

Note read

Check your recall[14 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Describe[3 marks]

    Describe the structure and function of a parallel plate capacitor.

    Show mark schemeHide mark scheme

    Model answer

    It has two flat conducting plates, parallel and separated by a small gap of vacuum or insulator. It holds equal and opposite charges on the plates. In doing so it stores energy in the electric field between them.

    • 1 mark for describing two parallel conducting plates separated by a gap
    • 1 mark for stating that the plates hold equal and opposite charges
    • 1 mark for stating that it stores energy in the field between the plates
  2. 2.Calculate[3 marks]

    Calculate the capacitance of a vacuum parallel plate capacitor with plate area 0.020 m20.020\,\mathrm{m^2}0.020m2 and gap 1.5×10−3 m1.5\times10^{-3}\,\mathrm{m}1.5×10−3m.

    Show mark schemeHide mark scheme

    Model answer

    C=κε0Ad=(1)(8.85×10−12)(0.020)1.5×10−3=1.2×10−10 FC=\kappa\varepsilon_0\frac{A}{d}=\frac{(1)(8.85\times10^{-12})(0.020)}{1.5\times10^{-3}}=1.2\times10^{-10}\,\mathrm{F}C=κε0​dA​=1.5×10−3(1)(8.85×10−12)(0.020)​=1.2×10−10F.

    • 1 mark for using C=κε0AdC=\kappa\varepsilon_0\frac{A}{d}C=κε0​dA​ with κ=1\kappa=1κ=1
    • 1 mark for substituting the values correctly
    • 1 mark for obtaining 1.2×10−10 F1.2\times10^{-10}\,\mathrm{F}1.2×10−10F
  3. 3.Determine[3 marks]

    Determine the energy stored in a 4.0×10−6 F4.0\times10^{-6}\,\mathrm{F}4.0×10−6F capacitor charged to 9.0 V.

    Show mark schemeHide mark scheme

    Model answer

    UC=12C(ΔV)2=12(4.0×10−6)(9.0)2=1.6×10−4 JU_C=\frac{1}{2}C(\Delta V)^2=\frac{1}{2}(4.0\times10^{-6})(9.0)^2=1.6\times10^{-4}\,\mathrm{J}UC​=21​C(ΔV)2=21​(4.0×10−6)(9.0)2=1.6×10−4J.

    • 1 mark for using UC=12C(ΔV)2U_C=\frac{1}{2}C(\Delta V)^2UC​=21​C(ΔV)2
    • 1 mark for substituting with the potential difference squared
    • 1 mark for obtaining 1.6×10−4 J1.6\times10^{-4}\,\mathrm{J}1.6×10−4J
  4. 4.Explain[2 marks]

    Explain why increasing the gap between the plates of a parallel plate capacitor reduces its capacitance.

    Show mark schemeHide mark scheme

    Model answer

    Capacitance is inversely proportional to the gap, since C=κε0AdC=\kappa\varepsilon_0\frac{A}{d}C=κε0​dA​. A larger gap therefore gives a smaller capacitance for the same area and material.

    • 1 mark for stating that capacitance is inversely proportional to the gap
    • 1 mark for concluding that a larger gap gives a smaller capacitance
  5. 5.Explain[3 marks]

    Explain how a capacitor stores energy and then releases it.

    Show mark schemeHide mark scheme

    Model answer

    Charging separates charge onto the two plates, and the work done is stored as energy in the electric field. When the plates are connected through a circuit, charge flows from one plate to the other. The stored energy is transferred to the circuit.

    • 1 mark for stating that work is done to separate charge onto the plates
    • 1 mark for stating that the energy is stored in the electric field
    • 1 mark for explaining that discharge through a circuit transfers the energy

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

Identify where a charged capacitor stores its energy.
Show answer and explanation

Answer: C · Worked explanation

Separated charges on the plates create an electric field in the gap, and the work done to separate them is stored there. Chemical bonds and thermal motion are not the storage mechanism. Magnetic fields are not part of this energy storage either.
4.

Medium·Calculate[2 marks]

Calculate the capacitance of a capacitor that holds 8.0×10−6 C8.0\times10^{-6}\,\mathrm{C}8.0×10−6C on one plate when the potential difference across it is 16 V.
Show answer and explanation

Answer: A · Worked explanation

C=QΔV=8.0×10−6 C16 V=5.0×10−7 FC=\frac{Q}{\Delta V}=\frac{8.0\times10^{-6}\,\mathrm{C}}{16\,\mathrm{V}}=5.0\times10^{-7}\,\mathrm{F}C=ΔVQ​=16V8.0×10−6C​=5.0×10−7F. Dividing ΔV\Delta VΔV by QQQ gives 2.0×1062.0\times10^{6}2.0×106, which inverts the ratio. Multiplying the two gives 1.3×10−41.3\times10^{-4}1.3×10−4, which is not a capacitance. The value 8.0×10−68.0\times10^{-6}8.0×10−6 is just the charge, so no division has taken place. Check that the units farad, coulomb per volt, agree with the result.
5.

Medium·Predict[2 marks]

A vacuum parallel plate capacitor has capacitance C0C_0C0​. Its plate area is doubled and its gap is tripled. Predict the new capacitance.
Show answer and explanation

Answer: D · Worked explanation

Since C∝AdC\propto\frac{A}{d}C∝dA​, doubling AAA and tripling ddd multiplies CCC by 23\frac{2}{3}32​. The factor 6 multiplies both changes together. The factors 32\frac{3}{2}23​ and 16\frac{1}{6}61​ swap or invert one of the two changes, which does not match how AAA and ddd appear in the equation.
6.

Medium·Determine[2 marks]

Determine the energy stored in a 2.0×10−6 F2.0\times10^{-6}\,\mathrm{F}2.0×10−6F capacitor that is charged to 6.0 V.
Show answer and explanation

Answer: B · Worked explanation

UC=12C(ΔV)2=12(2.0×10−6)(6.0)2=3.6×10−5 JU_C=\frac{1}{2}C(\Delta V)^2=\frac{1}{2}(2.0\times10^{-6})(6.0)^2=3.6\times10^{-5}\,\mathrm{J}UC​=21​C(ΔV)2=21​(2.0×10−6)(6.0)2=3.6×10−5J. The value 7.2×10−5 J7.2\times10^{-5}\,\mathrm{J}7.2×10−5J omits the factor of one half. The value 1.2×10−5 J1.2\times10^{-5}\,\mathrm{J}1.2×10−5J is CΔVC\Delta VCΔV, which does not square the potential difference. Both slips come from misremembering the form of the energy formula. Write the formula down before substituting.
7.

Medium·Calculate[2 marks]

A dielectric with κ=5.0\kappa=5.0κ=5.0 fills the gap of a vacuum capacitor whose capacitance is 3.0×10−10 F3.0\times10^{-10}\,\mathrm{F}3.0×10−10F. Calculate the new capacitance.
Show answer and explanation

Answer: C · Worked explanation

The dielectric multiplies the capacitance by κ\kappaκ, so C=5.0×3.0×10−10=1.5×10−9 FC=5.0\times3.0\times10^{-10}=1.5\times10^{-9}\,\mathrm{F}C=5.0×3.0×10−10=1.5×10−9F. Dividing by κ\kappaκ gives 6.0×10−11 F6.0\times10^{-11}\,\mathrm{F}6.0×10−11F. Adding 5.0 to the coefficient gives 8.0×10−108.0\times10^{-10}8.0×10−10, which treats κ\kappaκ as an added term instead of a multiplier.
8.

Hard·Predict[2 marks]

A capacitor stays connected to a 12 V battery while its plate gap is doubled. Predict the changes in the charge on its plates and in its stored energy.
Show answer and explanation

Answer: B · Worked explanation

The battery holds ΔV\Delta VΔV fixed. Doubling ddd halves CCC, so Q=CΔVQ=C\Delta VQ=CΔV halves. Then UC=12QΔVU_C=\frac{1}{2}Q\Delta VUC​=21​QΔV also halves. A doubled energy would need QQQ to rise, which cannot happen when CCC falls at constant ΔV\Delta VΔV.
9.

Hard·Predict[2 marks]

A charged capacitor is disconnected from its battery. Its plates are then pulled apart until the gap doubles. Predict the effect on the stored energy.
Show answer and explanation

Answer: D · Worked explanation

With no battery, QQQ is fixed. Doubling ddd halves CCC, so ΔV=QC\Delta V=\frac{Q}{C}ΔV=CQ​ doubles. Then UC=12QΔVU_C=\frac{1}{2}Q\Delta VUC​=21​QΔV doubles, and the extra energy comes from the work done pulling the plates apart. The squared form 12C(ΔV)2\frac{1}{2}C(\Delta V)^221​C(ΔV)2 also needs the halved CCC, which cancels half of the increase.
10.

Hard·Determine[2 marks]

A 5.0×10−6 F5.0\times10^{-6}\,\mathrm{F}5.0×10−6F capacitor is charged to 20 V and then discharged through a lamp until the potential difference across it falls to 10 V. Determine the energy transferred from the capacitor.
Show answer and explanation

Answer: A · Worked explanation

The initial energy is 12(5.0×10−6)(20)2=1.0×10−3 J\frac{1}{2}(5.0\times10^{-6})(20)^2=1.0\times10^{-3}\,\mathrm{J}21​(5.0×10−6)(20)2=1.0×10−3J and the final energy is 12(5.0×10−6)(10)2=2.5×10−4 J\frac{1}{2}(5.0\times10^{-6})(10)^2=2.5\times10^{-4}\,\mathrm{J}21​(5.0×10−6)(10)2=2.5×10−4J. The difference is 7.5×10−4 J7.5\times10^{-4}\,\mathrm{J}7.5×10−4J. The value 5.0×10−4 J5.0\times10^{-4}\,\mathrm{J}5.0×10−4J wrongly assumes that halving the potential difference halves the energy. Energy depends on the square of the potential difference, so halving it quarters the stored energy. The value 2.5×10−4 J2.5\times10^{-4}\,\mathrm{J}2.5×10−4J is only what remains, not what was transferred.

Keep going

Next topic10.7 Conservation of electric energyPrevious topic10.5 Electric potential

More in Unit 10 · Electric Force, Field and Potential

  1. 10.1Electric charge and electric forceNotes · 10 questions
  2. 10.2Conservation of charge and chargingNotes · 10 questions
  3. 10.3Electric fieldsNotes · 10 questions
  4. 10.4Electric potential energyNotes · 10 questions
  5. 10.5Electric potentialNotes · 10 questions
  6. 10.6CapacitorsNotes · 10 questions
  7. 10.7Conservation of electric energyNotes · 10 questions

All AP Physics 2 topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/5 read

  1. 1A capacitor stores charge on two nearby conductors
  2. 2Capacitance measures the charge stored per volt
  3. 3Plate area, gap and dielectric set the capacitance
  4. 4A charged capacitor stores energy in its electric field
  5. 5A capacitor releases its energy when a circuit is connected
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe