Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA A-level Chemistry
  3. ›3.1 Physical chemistry
  4. ›3.1.12 Acids and bases

AQA A-level Chemistry · Section 3.1 · Physical chemistry

3.1.12 Acids and bases

Define acids and bases by proton transfer, calculate the pH of strong and weak acids and alkalis, and explain how buffers work.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Acids donate protons and bases accept them
  1. 1Acids donate protons and bases accept them
  2. 2pH is a logarithmic measure of hydrogen ion concentration
  3. 3Water’s ionic product lets us find the pH of alkalis
  4. 4Weak acids dissociate only partly, so their pH needs Ka
  5. 5Buffers resist change in pH when small amounts are added
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Acids donate protons and bases accept them

Lemon juice tastes sharp because it contains an acid. In the Brønsted–Lowry model, an acid is a proton donor and a base is a proton acceptor. A proton here is a hydrogen ion, H+\mathrm{H^+}H+.

When hydrogen chloride dissolves, it donates a proton: HCl(aq)→H+(aq)+Cl−(aq)\mathrm{HCl(aq)\rightarrow H^+(aq)+Cl^-(aq)}HCl(aq)→H+(aq)+Cl−(aq). In water, H+\mathrm{H^+}H+ is really H3O+\mathrm{H_3O^+}H3​O+, but we write H+(aq)\mathrm{H^+(aq)}H+(aq) for simplicity.

An alkali is a base that dissolves in water and produces hydroxide ions.

Common mistake

Do not treat ‘base’ and ‘alkali’ as the same thing. Every alkali is a base, but many bases do not dissolve in water.

Key terms · tap one for its definition

acid

An acid is a species that donates a proton, H+\mathrm{H^+}H+, to another species.

base

A base is a species that accepts a proton, H+\mathrm{H^+}H+, from another species.

alkali

An alkali is a base that dissolves in water to produce hydroxide ions, OH−\mathrm{OH^-}OH−.

Part 1 done

2

Part 2 of 5: pH is a logarithmic measure of hydrogen ion concentration

Chemists need a convenient number for acidity. pH is defined by pH=−log⁡10[H+]\mathrm{pH}=-\log_{10}[\mathrm{H^+}]pH=−log10​[H+], where [H+][\mathrm{H^+}][H+] is in mol dm−3\mathrm{mol\,dm^{-3}}moldm−3. A lower pH means a more acidic solution. Neutral solutions at 298 K have a pH of 7.00, and alkalis have a higher pH.

Figure 1. Lower pH values are more acidic, and each step to the right is a tenfold fall in hydrogen ion concentration.

Each pH unit is a tenfold change in [H+][\mathrm{H^+}][H+], so pH 3 has ten times the [H+][\mathrm{H^+}][H+] of pH 4. To go backwards, use [H+]=10−pH[\mathrm{H^+}]=10^{-\mathrm{pH}}[H+]=10−pH. The pH has no units.

Worked example

Converting between pH and hydrogen ion concentration

Calculate the pH of 0.020 mol dm−30.020\,\mathrm{mol\,dm^{-3}}0.020moldm−3 hydrochloric acid. Then find [H+][\mathrm{H^+}][H+] for a solution of pH 3.40.
  1. 1
    Hydrochloric acid dissociates completely, so [H+]=0.020 mol dm−3[\mathrm{H^+}]=0.020\,\mathrm{mol\,dm^{-3}}[H+]=0.020moldm−3.
  2. 2
    Calculate: pH=−log⁡10(0.020)=1.70\mathrm{pH}=-\log_{10}(0.020)=1.70pH=−log10​(0.020)=1.70.
  3. 3
    For the second part: [H+]=10−3.40[\mathrm{H^+}]=10^{-3.40}[H+]=10−3.40.
  4. 4
    Evaluate: 10−3.40=4.0×10−4 mol dm−310^{-3.40}=4.0\times10^{-4}\,\mathrm{mol\,dm^{-3}}10−3.40=4.0×10−4moldm−3.

Answer: The pH is 1.70, and [H+]=4.0×10−4 mol dm−3[\mathrm{H^+}]=4.0\times10^{-4}\,\mathrm{mol\,dm^{-3}}[H+]=4.0×10−4moldm−3.

Exam tip

Give pH to two decimal places unless told otherwise. Check that a more concentrated acid gives a lower pH.

Key term

pH

The pH of a solution is the negative logarithm to base ten of the hydrogen ion concentration, with [H+][\mathrm{H^+}][H+] in mol dm−3\mathrm{mol\,dm^{-3}}moldm−3.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the Brønsted–Lowry base in the reaction HCl+NH3→NH4++Cl−\mathrm{HCl+NH_3\rightarrow NH_4^++Cl^-}HCl+NH3​→NH4+​+Cl−.
Show answer and explanation

Answer: B · Worked explanation

Ammonia accepts a proton from HCl to form NH4+\mathrm{NH_4^+}NH4+​, so it is the base. HCl donates the proton, which makes it the acid, not the base. Remember that the base is the species that gains the proton, so follow where H+\mathrm{H^+}H+ ends up.
3

Part 3 of 5: Water’s ionic product lets us find the pH of alkalis

What about alkalis? They contain hydroxide ions, so we need a link to [H+][\mathrm{H^+}][H+]. Even pure water ionises very slightly: H2O(l)⇌H+(aq)+OH−(aq)\mathrm{H_2O(l)\rightleftharpoons H^+(aq)+OH^-(aq)}H2​O(l)⇌H+(aq)+OH−(aq). The ionic product of water, KwK_\mathrm{w}Kw​, is [H+][OH−][\mathrm{H^+}][\mathrm{OH^-}][H+][OH−]. At 298 K, Kw=1.00×10−14 mol2 dm−6K_\mathrm{w}=1.00\times10^{-14}\,\mathrm{mol^{2}\,dm^{-6}}Kw​=1.00×10−14mol2dm−6.

A strong alkali such as sodium hydroxide dissociates completely. So [OH−][\mathrm{OH^-}][OH−] equals its concentration. Then [H+]=Kw[OH−][\mathrm{H^+}]=\frac{K_\mathrm{w}}{[\mathrm{OH^-}]}[H+]=[OH−]Kw​​. Because KwK_\mathrm{w}Kw​ is constant at a given temperature, a rise in [OH−][\mathrm{OH^-}][OH−] must lower [H+][\mathrm{H^+}][H+]. Take the logarithm of [H+][\mathrm{H^+}][H+], not of [OH−][\mathrm{OH^-}][OH−].

Worked example

pH of a strong alkali

Calculate the pH of 0.050 mol dm−30.050\,\mathrm{mol\,dm^{-3}}0.050moldm−3 sodium hydroxide at 298 K.
  1. 1
    Sodium hydroxide dissociates completely, so [OH−]=0.050 mol dm−3[\mathrm{OH^-}]=0.050\,\mathrm{mol\,dm^{-3}}[OH−]=0.050moldm−3.
  2. 2
    Rearrange: [H+]=Kw[OH−]=1.00×10−140.050=2.0×10−13 mol dm−3[\mathrm{H^+}]=\frac{K_\mathrm{w}}{[\mathrm{OH^-}]}=\frac{1.00\times10^{-14}}{0.050}=2.0\times10^{-13}\,\mathrm{mol\,dm^{-3}}[H+]=[OH−]Kw​​=0.0501.00×10−14​=2.0×10−13moldm−3.
  3. 3
    Calculate: pH=−log⁡10(2.0×10−13)=12.70\mathrm{pH}=-\log_{10}(2.0\times10^{-13})=12.70pH=−log10​(2.0×10−13)=12.70.

Answer: The pH is 12.70.

Common mistake

Pure water is not always pH 7. KwK_\mathrm{w}Kw​ rises with temperature, so the pH of neutral water falls, while [H+][\mathrm{H^+}][H+] still equals [OH−][\mathrm{OH^-}][OH−].

Key term

ionic product of water

The ionic product of water, KwK_\mathrm{w}Kw​, is the product [H+][OH−][\mathrm{H^+}][\mathrm{OH^-}][H+][OH−] in aqueous solution, in mol2 dm−6\mathrm{mol^{2}\,dm^{-6}}mol2dm−6, and it depends on temperature.

Part 3 done

4

Part 4 of 5: Weak acids dissociate only partly, so their pH needs Ka

Compare two acids of the same concentration. A strong acid dissociates completely in water. A weak acid dissociates only partly, so its [H+][\mathrm{H^+}][H+] is much lower. Ethanoic acid is a common weak acid, while hydrochloric and nitric acids are strong. A weak acid therefore has a higher pH than a strong acid of equal concentration.

For a weak acid HA, HA(aq)⇌H+(aq)+A−(aq)\mathrm{HA(aq)\rightleftharpoons H^+(aq)+A^-(aq)}HA(aq)⇌H+(aq)+A−(aq). The acid dissociation constant is Ka=[H+][A−][HA]K_a=\frac{[\mathrm{H^+}][\mathrm{A^-}]}{[\mathrm{HA}]}Ka​=[HA][H+][A−]​.

We assume that [H+]=[A−][\mathrm{H^+}]=[\mathrm{A^-}][H+]=[A−], and that [HA][\mathrm{HA}][HA] stays equal to the starting concentration. Then Ka=[H+]2[HA]K_a=\frac{[\mathrm{H^+}]^2}{[\mathrm{HA}]}Ka​=[HA][H+]2​, so [H+]=Ka[HA][\mathrm{H^+}]=\sqrt{K_a[\mathrm{HA}]}[H+]=Ka​[HA]​. The approximation works because the acid is only slightly dissociated. A larger KaK_aKa​ means a stronger weak acid.

Worked example

pH of a weak acid

A weak acid HA has Ka=2.5×10−5 mol dm−3K_a=2.5\times10^{-5}\,\mathrm{mol\,dm^{-3}}Ka​=2.5×10−5moldm−3. Calculate the pH of a 0.010 mol dm−30.010\,\mathrm{mol\,dm^{-3}}0.010moldm−3 solution.
  1. 1
    Use [H+]=Ka[HA][\mathrm{H^+}]=\sqrt{K_a[\mathrm{HA}]}[H+]=Ka​[HA]​.
  2. 2
    Substitute: [H+]=(2.5×10−5)×0.010=2.5×10−7=5.0×10−4 mol dm−3[\mathrm{H^+}]=\sqrt{(2.5\times10^{-5})\times0.010}=\sqrt{2.5\times10^{-7}}=5.0\times10^{-4}\,\mathrm{mol\,dm^{-3}}[H+]=(2.5×10−5)×0.010​=2.5×10−7​=5.0×10−4moldm−3.
  3. 3
    Calculate: pH=−log⁡10(5.0×10−4)=3.30\mathrm{pH}=-\log_{10}(5.0\times10^{-4})=3.30pH=−log10​(5.0×10−4)=3.30.

Answer: The pH is 3.30.

Key terms · tap one for its definition

strong acid

A strong acid is an acid that dissociates completely in aqueous solution.

weak acid

A weak acid is an acid that dissociates only partially in aqueous solution, so an equilibrium is established.

acid dissociation constant

The acid dissociation constant, KaK_aKa​, is the equilibrium constant for a weak acid HA, in mol dm−3\mathrm{mol\,dm^{-3}}moldm−3.

Part 4 done

Quick check

One question on the part you just read

Easy

Calculate the pH of 0.0010 mol dm−30.0010\,\mathrm{mol\,dm^{-3}}0.0010moldm−3 hydrochloric acid.
Show answer and explanation

Answer: A · Worked explanation

Hydrochloric acid dissociates completely, so [H+]=1.0×10−3 mol dm−3[\mathrm{H^+}]=1.0\times10^{-3}\,\mathrm{mol\,dm^{-3}}[H+]=1.0×10−3moldm−3 and pH=−log⁡10(1.0×10−3)=3.00\mathrm{pH}=-\log_{10}(1.0\times10^{-3})=3.00pH=−log10​(1.0×10−3)=3.00. A value of 11.00 would come from subtracting from 14, which applies to a different quantity. Always keep the sign of the logarithm in mind, because a positive [H+][\mathrm{H^+}][H+] below 1 gives a positive pH.
5

Part 5 of 5: Buffers resist change in pH when small amounts are added

Blood must keep a nearly constant pH. A buffer is a solution that resists changes in pH when small amounts of acid or alkali are added. An acidic buffer contains a weak acid HA and one of its salts, such as ethanoic acid with sodium ethanoate.

The salt supplies plenty of A−\mathrm{A^-}A−, while the weak acid supplies HA. Added alkali reacts with HA: HA+OH−→A−+H2O\mathrm{HA+OH^-\rightarrow A^-+H_2O}HA+OH−→A−+H2​O. Added acid reacts with A−\mathrm{A^-}A−: A−+H+→HA\mathrm{A^-+H^+\rightarrow HA}A−+H+→HA. The ratio [HA][A−]\frac{[\mathrm{HA}]}{[\mathrm{A^-}]}[A−][HA]​ changes little, so [H+][\mathrm{H^+}][H+] changes little.

Worked example

pH of an acidic buffer

A buffer contains 0.200 mol dm−30.200\,\mathrm{mol\,dm^{-3}}0.200moldm−3 ethanoic acid and 0.100 mol dm−30.100\,\mathrm{mol\,dm^{-3}}0.100moldm−3 ethanoate ions. Ka=1.7×10−5 mol dm−3K_a=1.7\times10^{-5}\,\mathrm{mol\,dm^{-3}}Ka​=1.7×10−5moldm−3. Calculate its pH.
  1. 1
    Rearrange KaK_aKa​: [H+]=Ka×[HA][A−][\mathrm{H^+}]=K_a\times\frac{[\mathrm{HA}]}{[\mathrm{A^-}]}[H+]=Ka​×[A−][HA]​.
  2. 2
    Substitute: [H+]=1.7×10−5×0.2000.100=3.4×10−5 mol dm−3[\mathrm{H^+}]=1.7\times10^{-5}\times\frac{0.200}{0.100}=3.4\times10^{-5}\,\mathrm{mol\,dm^{-3}}[H+]=1.7×10−5×0.1000.200​=3.4×10−5moldm−3.
  3. 3
    Calculate: pH=−log⁡10(3.4×10−5)=4.47\mathrm{pH}=-\log_{10}(3.4\times10^{-5})=4.47pH=−log10​(3.4×10−5)=4.47.

Answer: The pH is 4.47.

Exam tip

To explain buffer action, write both reactions. Added acid is removed by the salt’s anion, and added alkali is removed by the weak acid.

Key term

buffer

A buffer is a solution that keeps its pH almost constant when small amounts of acid or alkali are added.

Note read

Check your recall[16 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[2 marks]

    State the Brønsted–Lowry definitions of an acid and of a base.

    Show mark schemeHide mark scheme

    Model answer

    An acid is a proton donor. A base is a proton acceptor.

    • 1 mark for stating that an acid is a proton donor
    • 1 mark for stating that a base is a proton acceptor
  2. 2.Calculate[3 marks]

    Calculate the pH of 0.020 mol dm−30.020\,\mathrm{mol\,dm^{-3}}0.020moldm−3 sodium hydroxide at 298 K, using Kw=1.00×10−14 mol2 dm−6K_\mathrm{w}=1.00\times10^{-14}\,\mathrm{mol^{2}\,dm^{-6}}Kw​=1.00×10−14mol2dm−6.

    Show mark schemeHide mark scheme

    Model answer

    [H+]=1.00×10−140.020=5.0×10−13 mol dm−3[\mathrm{H^+}]=\frac{1.00\times10^{-14}}{0.020}=5.0\times10^{-13}\,\mathrm{mol\,dm^{-3}}[H+]=0.0201.00×10−14​=5.0×10−13moldm−3, so pH=−log⁡10(5.0×10−13)=12.30\mathrm{pH}=-\log_{10}(5.0\times10^{-13})=12.30pH=−log10​(5.0×10−13)=12.30.

    • 1 mark for stating [OH−]=0.020 mol dm−3[\mathrm{OH^-}]=0.020\,\mathrm{mol\,dm^{-3}}[OH−]=0.020moldm−3
    • 1 mark for calculating [H+]=5.0×10−13 mol dm−3[\mathrm{H^+}]=5.0\times10^{-13}\,\mathrm{mol\,dm^{-3}}[H+]=5.0×10−13moldm−3
    • 1 mark for obtaining a pH of 12.30
  3. 3.Calculate[4 marks]

    Calculate the pH of 0.250 mol dm−30.250\,\mathrm{mol\,dm^{-3}}0.250moldm−3 methanoic acid, a weak acid with Ka=1.6×10−4 mol dm−3K_a=1.6\times10^{-4}\,\mathrm{mol\,dm^{-3}}Ka​=1.6×10−4moldm−3. State the assumptions you make.

    Show mark schemeHide mark scheme

    Model answer

    Assume [H+]=[A−][\mathrm{H^+}]=[\mathrm{A^-}][H+]=[A−] and that [HA][\mathrm{HA}][HA] equals the starting concentration. Then [H+]=1.6×10−4×0.250=6.3×10−3 mol dm−3[\mathrm{H^+}]=\sqrt{1.6\times10^{-4}\times0.250}=6.3\times10^{-3}\,\mathrm{mol\,dm^{-3}}[H+]=1.6×10−4×0.250​=6.3×10−3moldm−3, so pH=2.20\mathrm{pH}=2.20pH=2.20.

    • 1 mark for stating that [H+]=[A−][\mathrm{H^+}]=[\mathrm{A^-}][H+]=[A−]
    • 1 mark for stating that [HA] stays equal to the starting concentration
    • 1 mark for calculating [H+]=6.3×10−3 mol dm−3[\mathrm{H^+}]=6.3\times10^{-3}\,\mathrm{mol\,dm^{-3}}[H+]=6.3×10−3moldm−3
    • 1 mark for obtaining a pH of 2.20
  4. 4.Compare[2 marks]

    Compare the pH of a strong acid and a weak acid of the same concentration, and give the reason.

    Show mark schemeHide mark scheme

    Model answer

    The strong acid has the lower pH. It dissociates completely, so [H+][\mathrm{H^+}][H+] is higher, whereas the weak acid dissociates only partly.

    • 1 mark for stating that the strong acid has the lower pH
    • 1 mark for explaining that it dissociates completely while the weak acid dissociates only partly
  5. 5.Explain[3 marks]

    Explain how a buffer of ethanoic acid and sodium ethanoate resists a change in pH when a small amount of acid is added.

    Show mark schemeHide mark scheme

    Model answer

    The added H+\mathrm{H^+}H+ reacts with ethanoate ions to form ethanoic acid. This removes most of the added H+\mathrm{H^+}H+. The ratio of acid to ethanoate changes little, so [H+][\mathrm{H^+}][H+] and pH stay almost constant.

    • 1 mark for stating that ethanoate ions react with added H+\mathrm{H^+}H+
    • 1 mark for stating that ethanoic acid is formed
    • 1 mark for explaining that the ratio of acid to ethanoate changes little so pH is almost constant
  6. 6.Explain[2 marks]

    Explain why pure water at a temperature above 298 K is neutral but has a pH below 7.

    Show mark schemeHide mark scheme

    Model answer

    KwK_\mathrm{w}Kw​ increases with temperature, so [H+][\mathrm{H^+}][H+] is greater than 1.00×10−7 mol dm−31.00\times10^{-7}\,\mathrm{mol\,dm^{-3}}1.00×10−7moldm−3 and pH is below 7. It is still neutral because [H+]=[OH−][\mathrm{H^+}]=[\mathrm{OH^-}][H+]=[OH−].

    • 1 mark for stating that KwK_\mathrm{w}Kw​ increases with temperature so pH falls below 7
    • 1 mark for stating that it is neutral because [H+]=[OH−][\mathrm{H^+}]=[\mathrm{OH^-}][H+]=[OH−]

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Calculate[1 mark]

Calculate [H+][\mathrm{H^+}][H+] in a solution of pH 2.00.
Show answer and explanation

Answer: D · Worked explanation

Use [H+]=10−pH=10−2.00=1.0×10−2 mol dm−3[\mathrm{H^+}]=10^{-\mathrm{pH}}=10^{-2.00}=1.0\times10^{-2}\,\mathrm{mol\,dm^{-3}}[H+]=10−pH=10−2.00=1.0×10−2moldm−3. The value 1.0×10−121.0\times10^{-12}1.0×10−12 is the hydroxide ion concentration in this solution at 298 K, not the hydrogen ion concentration. Use the reverse formula 10−pH10^{-\mathrm{pH}}10−pH carefully, and check that a lower pH always gives a higher concentration of hydrogen ions.
4.

Medium·Calculate[2 marks]

Calculate the pH of 0.025 mol dm−30.025\,\mathrm{mol\,dm^{-3}}0.025moldm−3 sodium hydroxide at 298 K.
Show answer and explanation

Answer: C · Worked explanation

[H+]=1.00×10−140.025=4.0×10−13 mol dm−3[\mathrm{H^+}]=\frac{1.00\times10^{-14}}{0.025}=4.0\times10^{-13}\,\mathrm{mol\,dm^{-3}}[H+]=0.0251.00×10−14​=4.0×10−13moldm−3, so pH=−log⁡10(4.0×10−13)=12.40\mathrm{pH}=-\log_{10}(4.0\times10^{-13})=12.40pH=−log10​(4.0×10−13)=12.40. A value of 1.60 comes from taking −log⁡10-\log_{10}−log10​ of the hydroxide concentration directly, which gives a pH-like number for the wrong ion. Always use the hydroxide concentration with KwK_\mathrm{w}Kw​ first, and only then take the logarithm of [H+][\mathrm{H^+}][H+].
5.

Medium·Calculate[2 marks]

A weak acid HA has Ka=1.0×10−5 mol dm−3K_a=1.0\times10^{-5}\,\mathrm{mol\,dm^{-3}}Ka​=1.0×10−5moldm−3. Calculate the pH of a 0.10 mol dm−30.10\,\mathrm{mol\,dm^{-3}}0.10moldm−3 solution.
Show answer and explanation

Answer: A · Worked explanation

[H+]=Ka[HA]=1.0×10−5×0.10=1.0×10−3 mol dm−3[\mathrm{H^+}]=\sqrt{K_a[\mathrm{HA}]}=\sqrt{1.0\times10^{-5}\times0.10}=1.0\times10^{-3}\,\mathrm{mol\,dm^{-3}}[H+]=Ka​[HA]​=1.0×10−5×0.10​=1.0×10−3moldm−3, so pH=3.00\mathrm{pH}=3.00pH=3.00. A value of 1.00 treats the acid as strong, which ignores that only a small fraction dissociates. Because the acid is weak, only a small fraction dissociates, so the pH is far above the value for a strong acid of that concentration.
6.

Medium·Compare[1 mark]

Compare 0.10 mol dm−30.10\,\mathrm{mol\,dm^{-3}}0.10moldm−3 solutions of hydrochloric acid and ethanoic acid. Identify the correct statement.
Show answer and explanation

Answer: B · Worked explanation

Hydrochloric acid is a strong acid, so [H+][\mathrm{H^+}][H+] is close to 0.10 mol dm−30.10\,\mathrm{mol\,dm^{-3}}0.10moldm−3. Ethanoic acid is weak, so its [H+][\mathrm{H^+}][H+] is lower and its pH is higher. Equal concentration does not mean equal [H+][\mathrm{H^+}][H+]. In general, equal concentration of two acids does not give equal [H+][\mathrm{H^+}][H+] unless both are strong.
7.

Medium·Identify[1 mark]

Identify the pair of substances that would form an acidic buffer when dissolved together.
Show answer and explanation

Answer: D · Worked explanation

An acidic buffer needs a weak acid and a salt that supplies its anion, so ethanoic acid with sodium ethanoate works. Hydrochloric acid is a strong acid and sodium chloride gives no base to react with added acid, so that pair does not form a buffer. Always look for a weak acid and a salt of that acid sharing the same anion when identifying a buffer.
8.

Hard·Calculate[2 marks]

A buffer contains 0.100 mol dm−30.100\,\mathrm{mol\,dm^{-3}}0.100moldm−3 of weak acid HA and 0.200 mol dm−30.200\,\mathrm{mol\,dm^{-3}}0.200moldm−3 of its salt. Ka=2.0×10−5 mol dm−3K_a=2.0\times10^{-5}\,\mathrm{mol\,dm^{-3}}Ka​=2.0×10−5moldm−3. Calculate its pH.
Show answer and explanation

Answer: A · Worked explanation

[H+]=Ka×[HA][A−]=2.0×10−5×0.1000.200=1.0×10−5 mol dm−3[\mathrm{H^+}]=K_a\times\frac{[\mathrm{HA}]}{[\mathrm{A^-}]}=2.0\times10^{-5}\times\frac{0.100}{0.200}=1.0\times10^{-5}\,\mathrm{mol\,dm^{-3}}[H+]=Ka​×[A−][HA]​=2.0×10−5×0.2000.100​=1.0×10−5moldm−3, so pH = 5.00. The value 4.40 comes from inverting the ratio, and 2.85 treats the weak acid alone with no salt present. Always check which way up the ratio goes: the weak acid concentration is on top and the salt concentration below.
9.

Hard·Calculate[2 marks]

The ionic product of water is 5.5×10−14 mol2 dm−65.5\times10^{-14}\,\mathrm{mol^{2}\,dm^{-6}}5.5×10−14mol2dm−6 at 323 K. Calculate the pH of pure water at 323 K.
Show answer and explanation

Answer: C · Worked explanation

In pure water [H+]=[OH−][\mathrm{H^+}]=[\mathrm{OH^-}][H+]=[OH−], so [H+]=5.5×10−14=2.3×10−7 mol dm−3[\mathrm{H^+}]=\sqrt{5.5\times10^{-14}}=2.3\times10^{-7}\,\mathrm{mol\,dm^{-3}}[H+]=5.5×10−14​=2.3×10−7moldm−3 and pH = 6.63. A value of 7.00 assumes neutral water is always pH 7, and 13.26 is −log⁡10Kw-\log_{10}K_\mathrm{w}−log10​Kw​, which is twice the pH. Always remember that neutral water has equal [H+][\mathrm{H^+}][H+] and [OH−][\mathrm{OH^-}][OH−], even when that is not pH 7.
10.

Hard·Calculate[2 marks]

A buffer with 0.200 mol0.200\,\mathrm{mol}0.200mol HA and 0.200 mol0.200\,\mathrm{mol}0.200mol of its salt in 1.00 dm31.00\,\mathrm{dm^3}1.00dm3 has Ka=1.7×10−5 mol dm−3K_a=1.7\times10^{-5}\,\mathrm{mol\,dm^{-3}}Ka​=1.7×10−5moldm−3. Then 0.010 mol0.010\,\mathrm{mol}0.010mol of HCl is added with no volume change. Calculate the new pH.
Show answer and explanation

Answer: B · Worked explanation

The added acid converts A−\mathrm{A^-}A− to HA, giving 0.210 mol dm−30.210\,\mathrm{mol\,dm^{-3}}0.210moldm−3 HA and 0.190 mol dm−30.190\,\mathrm{mol\,dm^{-3}}0.190moldm−3 A−\mathrm{A^-}A−. Then [H+]=1.7×10−5×0.2100.190=1.9×10−5[\mathrm{H^+}]=1.7\times10^{-5}\times\frac{0.210}{0.190}=1.9\times10^{-5}[H+]=1.7×10−5×0.1900.210​=1.9×10−5, so pH = 4.73. A pH of 2.00 treats the acid as unreacted with no buffer, ignoring the salt. Always update both concentrations after adding the acid, and then reuse the same ratio expression for the new pH.

Keep going

Next topic3.2.1 PeriodicityPrevious topic3.1.11 Electrode potentials and cells

More in Section 3.1 · Physical chemistry

  1. 3.1.4EnergeticsNotes · 10 questions
  2. 3.1.5KineticsNotes · 10 questions
  3. 3.1.6Equilibria and KcNotes · 10 questions
  4. 3.1.7RedoxNotes · 10 questions
  5. 3.1.8ThermodynamicsNotes · 10 questions
  6. 3.1.9Rate equationsNotes · 10 questions
  7. 3.1.10Equilibrium constant KpNotes · 10 questions
  8. 3.1.11Electrode potentials and cellsNotes · 10 questions
  9. 3.1.12Acids and basesNotes · 10 questions

All AQA A-level Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/5 read

  1. 1Acids donate protons and bases accept them
  2. 2pH is a logarithmic measure of hydrogen ion concentration
  3. 3Water’s ionic product lets us find the pH of alkalis
  4. 4Weak acids dissociate only partly, so their pH needs Ka
  5. 5Buffers resist change in pH when small amounts are added
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe