Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA A-level Physics
  3. ›3.7 Fields and their consequences
  4. ›3.7.3 Electric fields

AQA A-level Physics · Section 3.7 · Fields and their consequences

3.7.3 Electric fields

Describe how charges create electric fields, draw field patterns, and calculate field strength and potential using Coulomb’s law.

  • 5 min read
  • 6 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/6Charges create electric fields around themselves
  1. 1Charges create electric fields around themselves
  2. 2Coulomb’s law gives the force between point charges
  3. 3Field lines show the direction and strength of a field
  4. 4Field strength is the force on each unit of charge
  5. 5Electric potential links energy to position in the field
  6. 6Electric and gravitational fields share a pattern with key differences
  7. Check your recall
  8. Practice: 10 questions
1

Part 1 of 6: Charges create electric fields around themselves

Rub a balloon on your hair and it sticks to a wall. Charged objects exert forces without touching. The region where a charge feels such a force is an electric field.

There are two types of charge. Like charges repel and unlike charges attract. Gravity, by comparison, only attracts.

We often model a small charged object as a point charge. Its field spreads out in every direction. The direction of any electric field is the direction of the force on a positive charge.

Common mistake

A negative charge in an electric field is pushed opposite to the field direction. The field arrow always shows the force on a positive charge.

Key terms · tap one for its definition

electric field

A region where an electric charge experiences an electric force.

point charge

A charge treated as concentrated at a single point.

Part 1 done

2

Part 2 of 6: Coulomb’s law gives the force between point charges

How strong is the force? Coulomb’s law states that the force between two point charges is proportional to the product of the charges. It is inversely proportional to the square of their separation.

In symbols, F=Q1Q24πε0r2F=\frac{Q_1Q_2}{4\pi\varepsilon_0r^2}F=4πε0​r2Q1​Q2​​. Here ε0\varepsilon_0ε0​ is the permittivity of free space, 8.85×10−12 F m−18.85\times10^{-12}\,\mathrm{F\,m^{-1}}8.85×10−12Fm−1. The force is repulsive for like charges and attractive for unlike charges.

Worked example

Force between two charges

Point charges of +2.0 nC+2.0\,\mathrm{nC}+2.0nC and −3.0 nC-3.0\,\mathrm{nC}−3.0nC are 4.0 cm4.0\,\mathrm{cm}4.0cm apart. Calculate the force between them.
  1. 1
    Use F=Q1Q24πε0r2F=\frac{Q_1Q_2}{4\pi\varepsilon_0r^2}F=4πε0​r2Q1​Q2​​ with the charges in coulombs and rrr in metres.
  2. 2
    Substitute: F=(2.0×10−9)(3.0×10−9)4π(8.85×10−12)(0.040)2F=\frac{(2.0\times10^{-9})(3.0\times10^{-9})}{4\pi(8.85\times10^{-12})(0.040)^2}F=4π(8.85×10−12)(0.040)2(2.0×10−9)(3.0×10−9)​.
  3. 3
    The numerator is 6.0×10−186.0\times10^{-18}6.0×10−18 and the denominator is 1.78×10−131.78\times10^{-13}1.78×10−13.
  4. 4
    Divide: F=6.0×10−181.78×10−13≈3.4×10−5F=\frac{6.0\times10^{-18}}{1.78\times10^{-13}}\approx3.4\times10^{-5}F=1.78×10−136.0×10−18​≈3.4×10−5.

Answer: The force has size 3.4×10−5 N3.4\times10^{-5}\,\mathrm{N}3.4×10−5N. It is attractive because the charges are unlike.

As with gravity, the force falls with the square of the distance. Doubling rrr leaves one quarter of the force.

Exam tip

Convert nanocoulombs and centimetres to coulombs and metres before substituting. Ignore the sign of the charges when finding the size, and use it only to decide the direction.

Key terms · tap one for its definition

Coulomb’s law

Coulomb’s law states that the force between two point charges is proportional to Q1Q2Q_1Q_2Q1​Q2​ and inversely proportional to r2r^2r2.

permittivity of free space

The permittivity of free space, ε0\varepsilon_0ε0​, is the constant relating electric force to charge and distance in a vacuum, 8.85×10−12 F m−18.85\times10^{-12}\,\mathrm{F\,m^{-1}}8.85×10−12Fm−1.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify how the direction of an electric field at a point is defined.
Show answer and explanation

Answer: B · Worked explanation

By definition, the field direction is the direction of the force on a positive test charge. A negative charge feels a force opposite to this direction, so a definition based on a negative test charge reverses every arrow. A neutral particle feels no electric force.
3

Part 3 of 6: Field lines show the direction and strength of a field

A picture helps once the force law is clear. A field line shows the direction of the force on a positive charge. Lines never cross. They are closer together where the field is stronger.

A positive point charge has lines pointing radially outwards. A negative point charge has lines pointing radially inwards. Lines start on positive charge and end on negative charge.

Figure 1. Lines leave a positive charge radially, but run straight and evenly spaced between oppositely charged plates.

Between two oppositely charged parallel plates the lines are straight, parallel and evenly spaced. This is a uniform electric field. Its strength is the same at every point between the plates, away from the edges.

Key terms · tap one for its definition

field line

A field line is a line whose tangent shows the direction of the force on a positive charge at that point.

uniform electric field

A uniform electric field is one with the same strength and direction at every point, as between oppositely charged parallel plates.

Part 3 done

4

Part 4 of 6: Field strength is the force on each unit of charge

Now we can put a number on the field. The electric field strength is the electric force per unit positive test charge at a point. We write E=FQE=\frac{F}{Q}E=QF​, with unit N C−1\mathrm{N\,C^{-1}}NC−1.

For a point charge QQQ, E=Q4πε0r2E=\frac{Q}{4\pi\varepsilon_0r^2}E=4πε0​r2Q​. In a uniform field, E=VdE=\frac{V}{d}E=dV​. Here VVV is the potential difference between the plates and ddd is their separation. The unit is then V m−1\mathrm{V\,m^{-1}}Vm−1, which equals N C−1\mathrm{N\,C^{-1}}NC−1.

Worked example

Field between plates

Two parallel plates are 5.0 cm5.0\,\mathrm{cm}5.0cm apart with a potential difference of 400 V400\,\mathrm{V}400V. Calculate the field strength and the force on an electron.
  1. 1
    Use E=VdE=\frac{V}{d}E=dV​ with d=0.050 md=0.050\,\mathrm{m}d=0.050m.
  2. 2
    Substitute: E=4000.050=8.0×103E=\frac{400}{0.050}=8.0\times10^{3}E=0.050400​=8.0×103.
  3. 3
    Use F=EQF=EQF=EQ with Q=1.60×10−19 CQ=1.60\times10^{-19}\,\mathrm{C}Q=1.60×10−19C.
  4. 4
    Substitute: F=(8.0×103)(1.60×10−19)≈1.3×10−15F=(8.0\times10^{3})(1.60\times10^{-19})\approx1.3\times10^{-15}F=(8.0×103)(1.60×10−19)≈1.3×10−15.

Answer: The field strength is 8.0×103 V m−18.0\times10^{3}\,\mathrm{V\,m^{-1}}8.0×103Vm−1 and the force is 1.3×10−15 N1.3\times10^{-15}\,\mathrm{N}1.3×10−15N.

Exam tip

The italic VVV is potential difference. The upright V\mathrm{V}V in a unit is the volt. Name each quantity in words when you first use its symbol.

Key term

electric field strength

The electric force per unit positive test charge at a point.

Part 4 done

Quick check

One question on the part you just read

Easy

The separation between two point charges is tripled. Predict how the force between them changes.
Show answer and explanation

Answer: B · Worked explanation

The force follows an inverse-square law, so tripling rrr divides the force by 32=93^2=932=9. The force falls to one ninth. A fall to one third treats the force as inversely proportional to rrr rather than to r2r^2r2. An unchanged force would mean the separation has no effect, which contradicts Coulomb’s law.
5

Part 5 of 6: Electric potential links energy to position in the field

Moving a charge in a field takes energy. The electric potential at a point is the work done per unit positive charge bringing a test charge from infinity. For a point charge, V=Q4πε0rV=\frac{Q}{4\pi\varepsilon_0r}V=4πε0​rQ​.

Unlike gravitational potential, this can be positive or negative. It is positive near a positive charge and negative near a negative charge. The work done moving a charge QQQ through a potential difference ΔV\Delta VΔV is QΔVQ\Delta VQΔV.

A surface of constant potential is an equipotential. No work is done moving along it, so field lines cross equipotentials at right angles. The field strength is minus the potential gradient: E=−ΔVΔrE=-\frac{\Delta V}{\Delta r}E=−ΔrΔV​.

Key terms · tap one for its definition

electric potential

The electric potential, VVV, at a point is the work done per unit positive charge bringing a test charge from infinity, in J C−1\mathrm{J\,C^{-1}}JC−1.

equipotential

An equipotential is a surface on which every point has the same electric potential, so no work is done moving a charge along it.

Part 5 done

6

Part 6 of 6: Electric and gravitational fields share a pattern with key differences

The two fields look alike mathematically. Both follow an inverse-square law, and both have a field strength and a potential. The table sets the quantities side by side so the differences stand out.

Electric and gravitational fields compared

FeatureGravitational fieldElectric field
SourceMassCharge
ForceAlways attractiveAttractive or repulsive
Force lawF=Gm1m2r2F=\frac{Gm_1m_2}{r^2}F=r2Gm1​m2​​F=Q1Q24πε0r2F=\frac{Q_1Q_2}{4\pi\varepsilon_0r^2}F=4πε0​r2Q1​Q2​​
Field strengthg=Fmg=\frac{F}{m}g=mF​E=FQE=\frac{F}{Q}E=QF​
Potential near sourceAlways negativePositive or negative
Feature
Source
Gravitational field
Mass
Electric field
Charge
Feature
Force
Gravitational field
Always attractive
Electric field
Attractive or repulsive
Feature
Force law
Gravitational field
F=Gm1m2r2F=\frac{Gm_1m_2}{r^2}F=r2Gm1​m2​​
Electric field
F=Q1Q24πε0r2F=\frac{Q_1Q_2}{4\pi\varepsilon_0r^2}F=4πε0​r2Q1​Q2​​
Feature
Field strength
Gravitational field
g=Fmg=\frac{F}{m}g=mF​
Electric field
E=FQE=\frac{F}{Q}E=QF​
Feature
Potential near source
Gravitational field
Always negative
Electric field
Positive or negative

Gravitational potential is always negative because gravity only attracts. Electric potential has either sign because electric forces can also repel. When you compare the two, state the sign of the source charge before you state the sign of the potential. Also say whether the force on a test charge can repel.

Note read

Check your recall[15 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[2 marks]

    State Coulomb’s law.

    Show mark schemeHide mark scheme

    Model answer

    The force between two point charges is proportional to the product of the charges. It is inversely proportional to the square of the distance between them.

    • 1 mark for stating that the force is proportional to the product of the charges
    • 1 mark for stating that the force is inversely proportional to the square of their separation
  2. 2.Describe[3 marks]

    Describe the electric field between two oppositely charged parallel plates.

    Show mark schemeHide mark scheme

    Model answer

    The field lines are straight, parallel and evenly spaced. They point from the positive plate to the negative plate. The field strength is therefore the same at every point between the plates.

    • 1 mark for stating that the lines are straight, parallel and evenly spaced
    • 1 mark for stating that the direction is from the positive plate to the negative plate
    • 1 mark for stating that the field is uniform, with the same strength everywhere
  3. 3.Calculate[3 marks]

    Calculate the electric field strength at a distance of 0.50 m0.50\,\mathrm{m}0.50m from a point charge of +5.0 nC+5.0\,\mathrm{nC}+5.0nC.

    Show mark schemeHide mark scheme

    Model answer

    E=Q4πε0r2=5.0×10−94π(8.85×10−12)(0.50)2=1.8×102 N C−1E=\frac{Q}{4\pi\varepsilon_0r^2}=\frac{5.0\times10^{-9}}{4\pi(8.85\times10^{-12})(0.50)^2}=1.8\times10^{2}\,\mathrm{N\,C^{-1}}E=4πε0​r2Q​=4π(8.85×10−12)(0.50)25.0×10−9​=1.8×102NC−1.

    • 1 mark for using E=Q4πε0r2E=\frac{Q}{4\pi\varepsilon_0r^2}E=4πε0​r2Q​
    • 1 mark for converting the charge to coulombs and substituting correctly
    • 1 mark for obtaining 1.8×102 N C−11.8\times10^{2}\,\mathrm{N\,C^{-1}}1.8×102NC−1
  4. 4.Explain[2 marks]

    Explain why no work is done when a charge moves along an equipotential surface.

    Show mark schemeHide mark scheme

    Model answer

    Every point on the surface has the same electric potential, so the potential difference is zero. The work done is QΔVQ\Delta VQΔV, which is therefore zero.

    • 1 mark for stating that the potential difference between points on the surface is zero
    • 1 mark for linking work done QΔVQ\Delta VQΔV to a zero potential difference
  5. 5.Compare[3 marks]

    Compare electric fields and gravitational fields.

    Show mark schemeHide mark scheme

    Model answer

    Both produce forces that obey an inverse-square law. Gravitational forces are always attractive, but electric forces can attract or repel. Gravitational fields act on mass, while electric fields act on charge.

    • 1 mark for stating a similarity such as both following an inverse-square law
    • 1 mark for stating that gravity is always attractive but electric forces can attract or repel
    • 1 mark for stating that the sources are mass and charge respectively
  6. 6.Calculate[2 marks]

    Calculate the field strength between two parallel plates 2.0 cm2.0\,\mathrm{cm}2.0cm apart with a potential difference of 250 V250\,\mathrm{V}250V.

    Show mark schemeHide mark scheme

    Model answer

    E=Vd=2500.020=1.3×104 V m−1E=\frac{V}{d}=\frac{250}{0.020}=1.3\times10^{4}\,\mathrm{V\,m^{-1}}E=dV​=0.020250​=1.3×104Vm−1.

    • 1 mark for using E=VdE=\frac{V}{d}E=dV​ with ddd in metres
    • 1 mark for obtaining 1.3×104 V m−11.3\times10^{4}\,\mathrm{V\,m^{-1}}1.3×104Vm−1

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

Identify the field pattern between two large, oppositely charged parallel plates, away from the edges.
Show answer and explanation

Answer: A · Worked explanation

The field between oppositely charged parallel plates is uniform. Its lines are straight, parallel and evenly spaced, running from the positive plate to the negative plate. Radial lines belong to a point charge, where the field weakens with distance. Lines that crowd together towards one plate would describe a field that is not uniform.
4.

Medium·Calculate[2 marks]

Calculate the force between two point charges of +4.0 nC+4.0\,\mathrm{nC}+4.0nC and +4.0 nC+4.0\,\mathrm{nC}+4.0nC that are 3.0 cm3.0\,\mathrm{cm}3.0cm apart. Use ε0=8.85×10−12 F m−1\varepsilon_0=8.85\times10^{-12}\,\mathrm{F\,m^{-1}}ε0​=8.85×10−12Fm−1.
Show answer and explanation

Answer: A · Worked explanation

F=Q1Q24πε0r2=(4.0×10−9)24π(8.85×10−12)(0.030)2≈1.6×10−4 NF=\frac{Q_1Q_2}{4\pi\varepsilon_0r^2}=\frac{(4.0\times10^{-9})^2}{4\pi(8.85\times10^{-12})(0.030)^2}\approx1.6\times10^{-4}\,\mathrm{N}F=4πε0​r2Q1​Q2​​=4π(8.85×10−12)(0.030)2(4.0×10−9)2​≈1.6×10−4N, repulsive. The value 2.0×10−3 N2.0\times10^{-3}\,\mathrm{N}2.0×10−3N comes from omitting the factor 4π4\pi4π. The value 4.8×10−6 N4.8\times10^{-6}\,\mathrm{N}4.8×10−6N comes from using rrr instead of r2r^2r2. The force is repulsive because both charges are positive. The value 1.6×10−8 N1.6\times10^{-8}\,\mathrm{N}1.6×10−8N comes from using 3.0 as the separation, which forgets to convert centimetres to metres.
5.

Medium·Calculate[2 marks]

Calculate the field strength between parallel plates 3.0 mm3.0\,\mathrm{mm}3.0mm apart with a potential difference of 12 V12\,\mathrm{V}12V.
Show answer and explanation

Answer: D · Worked explanation

E=Vd=123.0×10−3=4.0×103 V m−1E=\frac{V}{d}=\frac{12}{3.0\times10^{-3}}=4.0\times10^{3}\,\mathrm{V\,m^{-1}}E=dV​=3.0×10−312​=4.0×103Vm−1. The value 4.0 V m−14.0\,\mathrm{V\,m^{-1}}4.0Vm−1 comes from using the separation in millimetres without converting to metres. The value 36 V m−136\,\mathrm{V\,m^{-1}}36Vm−1 comes from multiplying instead of dividing. The value 4.0×10−4 V m−14.0\times10^{-4}\,\mathrm{V\,m^{-1}}4.0×10−4Vm−1 has the power of ten wrong, which comes from mishandling the conversion of millimetres to metres. Always convert millimetres to metres before substituting.
6.

Medium·Predict[2 marks]

The field strength at distance rrr from a point charge QQQ is EEE. Predict the field strength at distance 2r2r2r from a point charge 2Q2Q2Q.
Show answer and explanation

Answer: D · Worked explanation

Field strength is proportional to Qr2\frac{Q}{r^2}r2Q​. Doubling QQQ doubles the field, and doubling rrr divides it by four, so the net factor is 24=12\frac{2}{4}=\frac{1}{2}42​=21​. A value of E4\frac{E}{4}4E​ accounts for the change in distance but forgets that the charge also doubled.
7.

Medium·Determine[2 marks]

The electric potential falls from +500 V+500\,\mathrm{V}+500V to +300 V+300\,\mathrm{V}+300V over a distance of 0.040 m0.040\,\mathrm{m}0.040m along a field line. Determine the mean field strength.
Show answer and explanation

Answer: B · Worked explanation

Field strength is minus the potential gradient: E=2000.040=5.0×103 V m−1E=\frac{200}{0.040}=5.0\times10^{3}\,\mathrm{V\,m^{-1}}E=0.040200​=5.0×103Vm−1. The value 2.0×104 V m−12.0\times10^{4}\,\mathrm{V\,m^{-1}}2.0×104Vm−1 comes from adding the two potentials instead of finding the change. The value 8.0 V m−18.0\,\mathrm{V\,m^{-1}}8.0Vm−1 comes from multiplying the change by the distance. The value 2.0×10−4 V m−12.0\times10^{-4}\,\mathrm{V\,m^{-1}}2.0×10−4Vm−1 comes from dividing the distance by the change in potential.
8.

Hard·Compare[2 marks]

A proton and an electron are placed in turn in the same uniform electric field. Compare the electric forces on them.
Show answer and explanation

Answer: C · Worked explanation

The force is F=EQF=EQF=EQ, and the proton and electron have charges of equal size and opposite sign. The forces are therefore equal in size and opposite in direction. Mass does not enter F=EQF=EQF=EQ, so the heavier particle does not feel a larger force, although it accelerates less.
9.

Hard·Calculate[2 marks]

Calculate the electric potential at a point 0.20 m0.20\,\mathrm{m}0.20m from a point charge of −2.0 nC-2.0\,\mathrm{nC}−2.0nC. Use ε0=8.85×10−12 F m−1\varepsilon_0=8.85\times10^{-12}\,\mathrm{F\,m^{-1}}ε0​=8.85×10−12Fm−1.
Show answer and explanation

Answer: C · Worked explanation

V=Q4πε0r=−2.0×10−94π(8.85×10−12)(0.20)≈−90 VV=\frac{Q}{4\pi\varepsilon_0r}=\frac{-2.0\times10^{-9}}{4\pi(8.85\times10^{-12})(0.20)}\approx-90\,\mathrm{V}V=4πε0​rQ​=4π(8.85×10−12)(0.20)−2.0×10−9​≈−90V. The sign follows the sign of the charge. A value of +90 V+90\,\mathrm{V}+90V ignores the sign. The value of magnitude 4.5×102 V4.5\times10^{2}\,\mathrm{V}4.5×102V comes from using r2r^2r2, which is the field strength formula rather than the potential formula. A value of +4.5×102 V+4.5\times10^{2}\,\mathrm{V}+4.5×102V makes both errors at once.
10.

Hard·Determine[2 marks]

A charge of 3.0 nC3.0\,\mathrm{nC}3.0nC is moved 0.50 m0.50\,\mathrm{m}0.50m along an equipotential surface in a region where the field strength is 200 N C−1200\,\mathrm{N\,C^{-1}}200NC−1. Determine the work done by the field force.
Show answer and explanation

Answer: D · Worked explanation

Along an equipotential surface the potential difference is zero, so the work done QΔVQ\Delta VQΔV is zero. The field force acts at right angles to the surface, so it has no component along the motion. The value 3.0×10−7 J3.0\times10^{-7}\,\mathrm{J}3.0×10−7J comes from wrongly using EQdEQdEQd as though the force acted along the path.

Keep going

Next topic3.7.4 CapacitancePrevious topic3.7.2 Gravitational fields

More in Section 3.7 · Fields and their consequences

  1. 3.7.1FieldsNotes · 10 questions
  2. 3.7.2Gravitational fieldsNotes · 10 questions
  3. 3.7.3Electric fieldsNotes · 10 questions
  4. 3.7.4CapacitanceNotes · 10 questions
  5. 3.7.5Magnetic fieldsNotes · 10 questions

All AQA A-level Physics topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/6 read

  1. 1Charges create electric fields around themselves
  2. 2Coulomb’s law gives the force between point charges
  3. 3Field lines show the direction and strength of a field
  4. 4Field strength is the force on each unit of charge
  5. 5Electric potential links energy to position in the field
  6. 6Electric and gravitational fields share a pattern with key differences
  7. Check your recall
  8. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe