Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA A-level Physics
  3. ›3.7 Fields and their consequences
  4. ›3.7.5 Magnetic fields

AQA A-level Physics · Section 3.7 · Fields and their consequences

3.7.5 Magnetic fields

Describe how currents and magnets produce magnetic fields, draw their patterns, and calculate forces on wires and moving charges.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Magnets and moving charges produce magnetic fields
  1. 1Magnets and moving charges produce magnetic fields
  2. 2Field patterns depend on the shape of the source
  3. 3A current in a field feels a force at right angles
  4. 4A moving charge feels a force in a magnetic field
  5. 5The magnetic force makes a particle follow a circle
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Magnets and moving charges produce magnetic fields

A compass needle turns when you bring a magnet close. Something around the magnet acts on the needle. That region is a magnetic field.

Magnetic fields come from permanent magnets and from moving charges. A current-carrying wire is a source because a current is a flow of moving charge. The direction of the field is the direction in which a north pole would be pushed.

Common mistake

Field lines do not start or stop. Outside a magnet they run from north to south. Inside, they continue from south to north, forming closed loops.

Key terms · tap one for its definition

magnetic field

A region where magnetic materials or moving charges can experience a magnetic force.

current-carrying wire

A wire through which electric charge flows, producing a magnetic field around it.

Part 1 done

2

Part 2 of 5: Field patterns depend on the shape of the source

A bar magnet’s field lines leave the north pole, curve round and enter the south pole. They are closest together at the poles, where the field is strongest.

Figure 1. Lines run from north to south outside a bar magnet. Around a wire, they form circles centred on the wire.

A long straight wire has circular field lines centred on the wire. The field weakens with distance from the wire. The right-hand grip rule gives their direction: point the right thumb along the conventional current, and the fingers curl the way the field points.

A solenoid is a long coil, and its field resembles a bar magnet’s. Inside, the lines are close, parallel and straight.

Exam tip

Use the right hand for the field produced by a current. Use the left hand for the force on a current in a field.

Key terms · tap one for its definition

right-hand grip rule

The right-hand grip rule gives the direction of the field around a current: the thumb shows conventional current and the curled fingers show the field.

solenoid

A solenoid is a long cylindrical coil of wire that produces a nearly uniform magnetic field inside it when it carries a current.

Part 2 done

Quick check

One question on the part you just read

Easy

State the direction of the magnetic field lines outside a bar magnet.
Show answer and explanation

Answer: B · Worked explanation

By convention, the field direction is the direction a north pole would be pushed. Outside a bar magnet the lines therefore run from the north pole to the south pole. Lines running from south to north are correct only inside the magnet, where the loops close.
3

Part 3 of 5: A current in a field feels a force at right angles

Place a current-carrying wire in a magnetic field and it feels a force. The force is greatest when the wire is at right angles to the field. It is zero when the wire lies along the field.

The size of the force is F=BILsin⁡θF=BIL\sin\thetaF=BILsinθ. Here III is the current and LLL is the length of wire in the field. The angle between wire and field is θ\thetaθ. BBB is the magnetic flux density, measured in tesla.

Worked example

Force on a wire

A wire of length 0.15 m0.15\,\mathrm{m}0.15m carries 4.0 A4.0\,\mathrm{A}4.0A at 30∘30^{\circ}30∘ to a field of flux density 0.25 T0.25\,\mathrm{T}0.25T. Calculate the force.
  1. 1
    Use F=BILsin⁡θF=BIL\sin\thetaF=BILsinθ.
  2. 2
    Substitute: F=(0.25)(4.0)(0.15)sin⁡30∘F=(0.25)(4.0)(0.15)\sin30^{\circ}F=(0.25)(4.0)(0.15)sin30∘.
  3. 3
    Evaluate: F=0.15×0.50=0.075F=0.15\times0.50=0.075F=0.15×0.50=0.075.

Answer: The force is 7.5×10−2 N7.5\times10^{-2}\,\mathrm{N}7.5×10−2N.

Fleming’s left-hand rule gives the direction of the force. Hold the first finger, second finger and thumb at right angles.

Fleming’s left-hand rule

DigitShows
First fingerDirection of the field
Second fingerDirection of conventional current
ThumbDirection of the force
Digit
First finger
Shows
Direction of the field
Digit
Second finger
Shows
Direction of conventional current
Digit
Thumb
Shows
Direction of the force

Key terms · tap one for its definition

magnetic flux density

Magnetic flux density BBB is force per unit current per unit length on a perpendicular wire, measured in tesla, N A−1 m−1\mathrm{N\,A^{-1}\,m^{-1}}NA−1m−1.

Fleming’s left-hand rule

Fleming’s left-hand rule gives force direction: first finger for field, second finger for conventional current, thumb for force, all at right angles.

Part 3 done

4

Part 4 of 5: A moving charge feels a force in a magnetic field

A current is moving charges, so each moving charge feels a share of the force. A particle with charge QQQ and speed vvv feels F=BQvsin⁡θF=BQv\sin\thetaF=BQvsinθ. Fleming’s rule applies if the second finger points along the motion of a positive charge.

For an electron, the second finger points opposite to its velocity. The force is always at right angles to the velocity. It changes the direction of motion but not the speed. So the magnetic force does no work on the particle.

Worked example

Force on a proton

A proton moves at 4.0×105 m s−14.0\times10^{5}\,\mathrm{m\,s^{-1}}4.0×105ms−1 at right angles to a field of 0.20 T0.20\,\mathrm{T}0.20T. Calculate the force. The proton’s charge is 1.60×10−19 C1.60\times10^{-19}\,\mathrm{C}1.60×10−19C.
  1. 1
    Use F=BQvF=BQvF=BQv because sin⁡90∘=1\sin90^{\circ}=1sin90∘=1.
  2. 2
    Substitute: F=(0.20)(1.60×10−19)(4.0×105)F=(0.20)(1.60\times10^{-19})(4.0\times10^{5})F=(0.20)(1.60×10−19)(4.0×105).
  3. 3
    Evaluate: F≈1.3×10−14F\approx1.3\times10^{-14}F≈1.3×10−14.

Answer: The force is 1.3×10−14 N1.3\times10^{-14}\,\mathrm{N}1.3×10−14N.

Common mistake

A magnetic field cannot speed a charged particle up. The force is at right angles to the motion, so it does no work.

Part 4 done

Quick check

One question on the part you just read

Easy

State the SI unit of magnetic flux density.
Show answer and explanation

Answer: C · Worked explanation

Magnetic flux density is force per unit current per unit length, which is measured in tesla, 1 T=1 N A−1 m−11\,\mathrm{T}=1\,\mathrm{N\,A^{-1}\,m^{-1}}1T=1NA−1m−1. The newton is the unit of force, so it would describe the force on the wire rather than the field strength. The ampere is the unit of current.
5

Part 5 of 5: The magnetic force makes a particle follow a circle

Suppose a charged particle enters a uniform field at right angles to it. The force stays at right angles to the velocity and keeps constant size. It acts towards a fixed centre, so the path is a circle.

This force is the centripetal force. It is the resultant force towards the centre of a circular path that keeps an object moving in it. Equating BQv=mv2rBQv=\frac{mv^2}{r}BQv=rmv2​ gives r=mvBQr=\frac{mv}{BQ}r=BQmv​.

Faster or heavier particles curve in larger circles. A stronger field or a larger charge gives a tighter circle.

Worked example

Radius of an electron’s path

An electron moves at 2.0×107 m s−12.0\times10^{7}\,\mathrm{m\,s^{-1}}2.0×107ms−1 at right angles to a field of 1.5 mT1.5\,\mathrm{mT}1.5mT. Calculate the radius of its path. Its mass is 9.11×10−31 kg9.11\times10^{-31}\,\mathrm{kg}9.11×10−31kg and its charge is 1.60×10−19 C1.60\times10^{-19}\,\mathrm{C}1.60×10−19C.
  1. 1
    Use r=mvBQr=\frac{mv}{BQ}r=BQmv​, with B=1.5×10−3 TB=1.5\times10^{-3}\,\mathrm{T}B=1.5×10−3T.
  2. 2
    Substitute: r=(9.11×10−31)(2.0×107)(1.5×10−3)(1.60×10−19)r=\frac{(9.11\times10^{-31})(2.0\times10^{7})}{(1.5\times10^{-3})(1.60\times10^{-19})}r=(1.5×10−3)(1.60×10−19)(9.11×10−31)(2.0×107)​.
  3. 3
    The numerator is 1.82×10−231.82\times10^{-23}1.82×10−23 and the denominator is 2.4×10−222.4\times10^{-22}2.4×10−22.
  4. 4
    Divide: r≈7.6×10−2r\approx7.6\times10^{-2}r≈7.6×10−2.

Answer: The radius is 7.6×10−2 m7.6\times10^{-2}\,\mathrm{m}7.6×10−2m.

Key term

centripetal force

A centripetal force is the resultant force on an object that acts towards the centre of its circular path.

Note read

Check your recall[16 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[3 marks]

    State what the first finger, second finger and thumb represent in Fleming’s left-hand rule.

    Show mark schemeHide mark scheme

    Model answer

    The first finger shows the direction of the magnetic field. The second finger shows the direction of the conventional current. The thumb shows the direction of the force.

    • 1 mark for stating that the first finger is the field direction
    • 1 mark for stating that the second finger is the conventional current direction
    • 1 mark for stating that the thumb is the force direction
  2. 2.Describe[3 marks]

    Describe the magnetic field pattern around a long straight current-carrying wire.

    Show mark schemeHide mark scheme

    Model answer

    The field lines are circles centred on the wire. Their direction follows the right-hand grip rule. The lines become further apart with distance from the wire, so the field weakens.

    • 1 mark for stating that the lines are concentric circles centred on the wire
    • 1 mark for giving the direction using the right-hand grip rule
    • 1 mark for stating that the field weakens with distance
  3. 3.Calculate[2 marks]

    Calculate the force on a 0.40 m0.40\,\mathrm{m}0.40m wire carrying 5.0 A5.0\,\mathrm{A}5.0A at right angles to a field of flux density 0.30 T0.30\,\mathrm{T}0.30T.

    Show mark schemeHide mark scheme

    Model answer

    F=BIL=(0.30)(5.0)(0.40)=0.60 NF=BIL=(0.30)(5.0)(0.40)=0.60\,\mathrm{N}F=BIL=(0.30)(5.0)(0.40)=0.60N.

    • 1 mark for using F=BILsin⁡θF=BIL\sin\thetaF=BILsinθ with θ=90∘\theta=90^{\circ}θ=90∘
    • 1 mark for obtaining 0.60 N0.60\,\mathrm{N}0.60N
  4. 4.Explain[2 marks]

    Explain why a magnetic field cannot change the speed of a charged particle.

    Show mark schemeHide mark scheme

    Model answer

    The magnetic force is always at right angles to the particle’s velocity. It has no component along the motion, so it does no work and only changes the direction.

    • 1 mark for stating that the force is at right angles to the velocity
    • 1 mark for explaining that no work is done, so the speed stays constant
  5. 5.Calculate[3 marks]

    Calculate the radius of the circular path of a proton moving at 3.0×106 m s−13.0\times10^{6}\,\mathrm{m\,s^{-1}}3.0×106ms−1 at right angles to a field of 0.50 T0.50\,\mathrm{T}0.50T. The proton’s mass is 1.67×10−27 kg1.67\times10^{-27}\,\mathrm{kg}1.67×10−27kg and its charge is 1.60×10−19 C1.60\times10^{-19}\,\mathrm{C}1.60×10−19C.

    Show mark schemeHide mark scheme

    Model answer

    r=mvBQ=(1.67×10−27)(3.0×106)(0.50)(1.60×10−19)=6.3×10−2 mr=\frac{mv}{BQ}=\frac{(1.67\times10^{-27})(3.0\times10^{6})}{(0.50)(1.60\times10^{-19})}=6.3\times10^{-2}\,\mathrm{m}r=BQmv​=(0.50)(1.60×10−19)(1.67×10−27)(3.0×106)​=6.3×10−2m.

    • 1 mark for using r=mvBQr=\frac{mv}{BQ}r=BQmv​
    • 1 mark for substituting the values correctly
    • 1 mark for obtaining 6.3×10−2 m6.3\times10^{-2}\,\mathrm{m}6.3×10−2m
  6. 6.Explain[3 marks]

    Explain why a charged particle moving at right angles to a uniform magnetic field follows a circular path.

    Show mark schemeHide mark scheme

    Model answer

    The magnetic force is at right angles to the velocity and has constant size. It always acts towards the same centre. It therefore acts as the centripetal force, so the path is a circle.

    • 1 mark for stating that the force is at right angles to the velocity
    • 1 mark for stating that the force has constant size and acts towards a fixed centre
    • 1 mark for identifying the force as the centripetal force giving circular motion

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

Identify the force on a straight wire carrying a current in the same direction as a uniform magnetic field.
Show answer and explanation

Answer: C · Worked explanation

The force is F=BILsin⁡θF=BIL\sin\thetaF=BILsinθ. When the wire lies along the field, θ=0∘\theta=0^{\circ}θ=0∘ and sin⁡θ=0\sin\theta=0sinθ=0, so there is no force. The force is largest when the wire is at right angles to the field, which is the opposite situation. A force along the wire is impossible, because the magnetic force on a current is at right angles to the wire.
4.

Medium·Calculate[2 marks]

Calculate the force on a 0.30 m0.30\,\mathrm{m}0.30m wire carrying 2.5 A2.5\,\mathrm{A}2.5A at right angles to a field of flux density 0.40 T0.40\,\mathrm{T}0.40T.
Show answer and explanation

Answer: D · Worked explanation

F=BIL=(0.40)(2.5)(0.30)=0.30 NF=BIL=(0.40)(2.5)(0.30)=0.30\,\mathrm{N}F=BIL=(0.40)(2.5)(0.30)=0.30N. The value 3.3 N3.3\,\mathrm{N}3.3N comes from dividing by the length instead of multiplying. The value 0.75 N0.75\,\mathrm{N}0.75N comes from leaving out the flux density, and 0.12 N0.12\,\mathrm{N}0.12N comes from leaving out the current. Always check that the angle is 90∘90^{\circ}90∘ before leaving out sin⁡θ\sin\thetasinθ, and give the unit as newtons.
5.

Medium·Calculate[2 marks]

Calculate the force on an electron moving at 5.0×106 m s−15.0\times10^{6}\,\mathrm{m\,s^{-1}}5.0×106ms−1 at right angles to a field of flux density 0.20 T0.20\,\mathrm{T}0.20T. The charge of an electron has magnitude 1.60×10−19 C1.60\times10^{-19}\,\mathrm{C}1.60×10−19C.
Show answer and explanation

Answer: B · Worked explanation

F=BQv=(0.20)(1.60×10−19)(5.0×106)=1.6×10−13 NF=BQv=(0.20)(1.60\times10^{-19})(5.0\times10^{6})=1.6\times10^{-13}\,\mathrm{N}F=BQv=(0.20)(1.60×10−19)(5.0×106)=1.6×10−13N. The value 3.2×10−20 N3.2\times10^{-20}\,\mathrm{N}3.2×10−20N comes from leaving out the speed. The value 6.4×10−27 N6.4\times10^{-27}\,\mathrm{N}6.4×10−27N comes from dividing by the speed instead of multiplying. The value 1.0×106 N1.0\times10^{6}\,\mathrm{N}1.0×106N comes from leaving out the charge, which gives a quantity in the wrong unit. Charges are tiny, so the force on one electron is tiny too.
6.

Medium·Predict[2 marks]

A charged particle moves in a circle in a uniform magnetic field. Its speed is doubled and nothing else changes. Predict the effect on the radius of its path.
Show answer and explanation

Answer: D · Worked explanation

The radius is r=mvBQr=\frac{mv}{BQ}r=BQmv​, so it is proportional to the speed. Doubling the speed doubles the radius. A fourfold increase would come from treating the radius as proportional to v2v^2v2, which is the kinetic energy rather than the radius relationship.
7.

Medium·Predict[2 marks]

A wire carries current to the right across the page. A uniform magnetic field points into the page. Predict the direction of the force on the wire.
Show answer and explanation

Answer: C · Worked explanation

Fleming’s left-hand rule: point the first finger into the page and the second finger to the right. The thumb then points up the page. The force is always at right angles to both the field and the current, so it cannot point into the page or along the wire.
8.

Hard·Compare[2 marks]

Particle B has four times the mass and twice the charge of particle A. Both enter the same uniform field at the same speed at right angles to it. Compare the radii of their paths.
Show answer and explanation

Answer: B · Worked explanation

The radius is r=mvBQr=\frac{mv}{BQ}r=BQmv​. Four times the mass multiplies rrr by 4, and twice the charge divides it by 2, so the net factor is 2. A factor of 4 accounts only for the mass. A factor of 8 multiplies by the charge instead of dividing.
9.

Hard·Determine[2 marks]

A wire of length 0.20 m0.20\,\mathrm{m}0.20m carries 3.0 A3.0\,\mathrm{A}3.0A at 30∘30^{\circ}30∘ to a uniform field. The force on it is 0.12 N0.12\,\mathrm{N}0.12N. Determine the flux density.
Show answer and explanation

Answer: D · Worked explanation

B=FILsin⁡θ=0.12(3.0)(0.20)sin⁡30∘=0.120.30=0.40 TB=\frac{F}{IL\sin\theta}=\frac{0.12}{(3.0)(0.20)\sin30^{\circ}}=\frac{0.12}{0.30}=0.40\,\mathrm{T}B=ILsinθF​=(3.0)(0.20)sin30∘0.12​=0.300.12​=0.40T. The value 0.20 T0.20\,\mathrm{T}0.20T comes from leaving out sin⁡θ\sin\thetasinθ. The value 0.10 T0.10\,\mathrm{T}0.10T comes from multiplying by sin⁡30∘\sin30^{\circ}sin30∘ instead of dividing by it. The value 0.23 T0.23\,\mathrm{T}0.23T comes from using cos⁡30∘\cos30^{\circ}cos30∘ in place of sin⁡30∘\sin30^{\circ}sin30∘. Use the angle measured between the wire and the field.
10.

Hard·Predict[2 marks]

A proton enters a uniform magnetic field with its velocity parallel to the field direction. Predict its subsequent motion.
Show answer and explanation

Answer: B · Worked explanation

The force is F=BQvsin⁡θF=BQv\sin\thetaF=BQvsinθ, and for velocity parallel to the field θ=0∘\theta=0^{\circ}θ=0∘, so F=0F=0F=0. With no resultant force, the proton continues in a straight line at constant speed. A circular path occurs only when the velocity has a component at right angles to the field.

Keep going

Next topic3.8.1.1 Rutherford scatteringPrevious topic3.7.4 Capacitance

More in Section 3.7 · Fields and their consequences

  1. 3.7.1FieldsNotes · 10 questions
  2. 3.7.2Gravitational fieldsNotes · 10 questions
  3. 3.7.3Electric fieldsNotes · 10 questions
  4. 3.7.4CapacitanceNotes · 10 questions
  5. 3.7.5Magnetic fieldsNotes · 10 questions

All AQA A-level Physics topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/5 read

  1. 1Magnets and moving charges produce magnetic fields
  2. 2Field patterns depend on the shape of the source
  3. 3A current in a field feels a force at right angles
  4. 4A moving charge feels a force in a magnetic field
  5. 5The magnetic force makes a particle follow a circle
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe