Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA A-level Physics
  3. ›3.7 Fields and their consequences
  4. ›3.7.4 Capacitance

AQA A-level Physics · Section 3.7 · Fields and their consequences

3.7.4 Capacitance

Define capacitance, describe charging and discharging with graphs, calculate stored energy, and explain how capacitors are used.

  • 5 min read
  • 6 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/6A capacitor stores charge on two separated plates
  1. 1A capacitor stores charge on two separated plates
  2. 2Plate area, separation and insulator set the capacitance
  3. 3Stored energy equals the area under a charge graph
  4. 4Capacitors charge and discharge along exponential curves
  5. 5The time constant sets how quickly a capacitor discharges
  6. 6Capacitors smooth supplies, store backup energy and set delays
  7. Check your recall
  8. Practice: 10 questions
1

Part 1 of 6: A capacitor stores charge on two separated plates

A camera flash releases its energy in a fraction of a second. A capacitor makes this possible. It stores charge on two conducting plates separated by an insulator.

Connect a potential difference VVV across the plates. Charge +Q+Q+Q builds up on one plate and −Q-Q−Q on the other. The more charge stored per volt, the greater the capacitance. In symbols, C=QVC=\frac{Q}{V}C=VQ​.

The unit is the farad, F\mathrm{F}F, where 1 F=1 C V−11\,\mathrm{F}=1\,\mathrm{C\,V^{-1}}1F=1CV−1. One farad is huge, so values appear in μF\mu\mathrm{F}μF, nF\mathrm{nF}nF and pF\mathrm{pF}pF. The symbol QQQ means the charge on one plate. The net charge on the capacitor is zero.

Exam tip

The italic CCC is capacitance and the upright C\mathrm{C}C is the coulomb. Name the quantity in words when you first use its symbol.

Key terms · tap one for its definition

capacitor

A capacitor is a component made of two conductors separated by an insulator that stores charge when a potential difference is applied.

capacitance

Capacitance, CCC, is the charge stored per unit potential difference across a capacitor, measured in farads, 1 F=1 C V−11\,\mathrm{F}=1\,\mathrm{C\,V^{-1}}1F=1CV−1.

Part 1 done

2

Part 2 of 6: Plate area, separation and insulator set the capacitance

What decides how much charge a capacitor holds per volt? Larger plates hold more charge, so capacitance rises with plate area AAA. Plates that are closer together make the stored charge easier to hold, so capacitance rises as separation ddd falls.

An insulating material between the plates is a dielectric. It raises the capacitance. The permittivity ε\varepsilonε of the dielectric sets how much. It leads to C=εAdC=\frac{\varepsilon A}{d}C=dεA​, where ε=ε0εr\varepsilon=\varepsilon_0\varepsilon_rε=ε0​εr​.

Here ε0=8.85×10−12 F m−1\varepsilon_0=8.85\times10^{-12}\,\mathrm{F\,m^{-1}}ε0​=8.85×10−12Fm−1 for free space, and εr\varepsilon_rεr​ is the relative permittivity. Air has εr\varepsilon_rεr​ close to 1.

Worked example

Parallel-plate capacitance

Two plates of area 0.020 m20.020\,\mathrm{m^2}0.020m2 are 0.50 mm0.50\,\mathrm{mm}0.50mm apart in air. Calculate the capacitance.
  1. 1
    Use C=ε0AdC=\frac{\varepsilon_0A}{d}C=dε0​A​, since air has εr≈1\varepsilon_r\approx1εr​≈1.
  2. 2
    Substitute: C=(8.85×10−12)(0.020)5.0×10−4C=\frac{(8.85\times10^{-12})(0.020)}{5.0\times10^{-4}}C=5.0×10−4(8.85×10−12)(0.020)​.
  3. 3
    The numerator is 1.77×10−131.77\times10^{-13}1.77×10−13.
  4. 4
    Divide: C=1.77×10−135.0×10−4≈3.5×10−10C=\frac{1.77\times10^{-13}}{5.0\times10^{-4}}\approx3.5\times10^{-10}C=5.0×10−41.77×10−13​≈3.5×10−10.

Answer: The capacitance is 3.5×10−10 F3.5\times10^{-10}\,\mathrm{F}3.5×10−10F, or 0.35 nF0.35\,\mathrm{nF}0.35nF.

Key terms · tap one for its definition

dielectric

A dielectric is an insulating material between the plates of a capacitor that increases its capacitance.

permittivity

The permittivity, ε\varepsilonε, of a dielectric is the constant in C=εAdC=\frac{\varepsilon A}{d}C=dεA​ for a parallel-plate capacitor, measured in F m−1\mathrm{F\,m^{-1}}Fm−1.

Part 2 done

Quick check

One question on the part you just read

Easy

State the unit of capacitance and its meaning.
Show answer and explanation

Answer: A · Worked explanation

Capacitance is charge per unit potential difference, so one farad is one coulomb per volt, 1 F=1 C V−11\,\mathrm{F}=1\,\mathrm{C\,V^{-1}}1F=1CV−1. One volt per coulomb is the inverse. One joule per coulomb is the volt, which is the unit of potential difference rather than capacitance.
3

Part 3 of 6: Stored energy equals the area under a charge graph

Charging a capacitor means pushing charge onto a plate against the repulsion of charge already there. This takes work. Each extra bit of charge needs a larger potential difference than the one before.

A graph of QQQ against VVV is a straight line through the origin, with gradient CCC. The energy stored is the area under the line. This area is a triangle, so E=12QVE=\frac12QVE=21​QV. Using Q=CVQ=CVQ=CV gives E=12CV2=Q22CE=\frac12CV^2=\frac{Q^2}{2C}E=21​CV2=2CQ2​.

Figure 1. The line is straight with gradient equal to the capacitance. The area under it is the stored energy.

Worked example

Energy in a capacitor

A 470 μF470\,\mu\mathrm{F}470μF capacitor is charged to 12 V12\,\mathrm{V}12V. Calculate the energy stored.
  1. 1
    Use E=12CV2E=\frac12CV^2E=21​CV2.
  2. 2
    Substitute: E=12(470×10−6)(12)2E=\frac12(470\times10^{-6})(12)^2E=21​(470×10−6)(12)2.
  3. 3
    Evaluate: E=12(470×10−6)(144)≈3.38×10−2E=\frac12(470\times10^{-6})(144)\approx3.38\times10^{-2}E=21​(470×10−6)(144)≈3.38×10−2.

Answer: The energy stored is 3.4×10−2 J3.4\times10^{-2}\,\mathrm{J}3.4×10−2J.

Common mistake

The energy is 12QV\frac12QV21​QV, not QVQVQV. The factor of one half arises because the potential difference rises from zero as charge is added.

Part 3 done

4

Part 4 of 6: Capacitors charge and discharge along exponential curves

Connect a charged capacitor across a resistor and charge flows round the circuit. This is discharge. The current is largest at the start, when the potential difference is largest. It then falls as the capacitor empties.

The charge, the potential difference and the current all show exponential decay. Each falls steeply at first, then levels off towards zero. Charging through a resistor is the reverse for charge and potential difference. They rise quickly at first, then level off at their maximum.

Figure 2. Both curves are exponential. They change fastest at the start and level off as time passes.

Common mistake

During charging, the current does not rise. It starts at its maximum value and falls towards zero as the capacitor charges.

Key term

exponential decay

Exponential decay is a change in which the rate of decrease of a quantity is proportional to its present value.

Part 4 done

Quick check

One question on the part you just read

Easy

Identify the change that would double the capacitance of a parallel-plate capacitor.
Show answer and explanation

Answer: B · Worked explanation

Capacitance is εAd\frac{\varepsilon A}{d}dεA​, so doubling the area doubles it. Doubling the separation halves it. Doubling the potential difference or the charge changes the other quantity in C=QVC=\frac{Q}{V}C=VQ​ but leaves the capacitance unchanged, because capacitance depends only on the construction.
5

Part 5 of 6: The time constant sets how quickly a capacitor discharges

How fast does the change happen? The time constant is the product RCRCRC. A larger resistance or capacitance makes the change slower.

During discharge, Q=Q0e−t/RCQ=Q_0e^{-t/RC}Q=Q0​e−t/RC. The potential difference VVV and current III follow the same form. Here Q0Q_0Q0​ is the maximum charge, at the start. After one time constant the charge is about 37% of Q0Q_0Q0​.

During charging, Q=Q0(1−e−t/RC)Q=Q_0\left(1-e^{-t/RC}\right)Q=Q0​(1−e−t/RC), with Q0Q_0Q0​ the maximum charge reached. After one time constant the charge is about 63% of Q0Q_0Q0​. The time for charge to halve is t1/2=RCln⁡2≈0.69 RCt_{1/2}=RC\ln2\approx0.69\,RCt1/2​=RCln2≈0.69RC.

Worked example

Potential difference during discharge

A 100 μF100\,\mu\mathrm{F}100μF capacitor discharges through a 50 kΩ50\,\mathrm{k\Omega}50kΩ resistor from 12 V12\,\mathrm{V}12V. Calculate the potential difference after 8.0 s8.0\,\mathrm{s}8.0s.
  1. 1
    Find the time constant: RC=(5.0×104)(1.0×10−4)=5.0 sRC=(5.0\times10^{4})(1.0\times10^{-4})=5.0\,\mathrm{s}RC=(5.0×104)(1.0×10−4)=5.0s.
  2. 2
    Use V=V0e−t/RCV=V_0e^{-t/RC}V=V0​e−t/RC, with V0=12 VV_0=12\,\mathrm{V}V0​=12V.
  3. 3
    Substitute: V=12 e−8.0/5.0=12 e−1.6V=12\,e^{-8.0/5.0}=12\,e^{-1.6}V=12e−8.0/5.0=12e−1.6.
  4. 4
    Evaluate: V=12×0.202≈2.4V=12\times0.202\approx2.4V=12×0.202≈2.4.

Answer: The potential difference after 8.0 s8.0\,\mathrm{s}8.0s is 2.4 V2.4\,\mathrm{V}2.4V.

Key term

time constant

The time constant, RCRCRC, is the time for the charge on a discharging capacitor to fall to 1e\frac{1}{e}e1​ of its initial value.

Part 5 done

6

Part 6 of 6: Capacitors smooth supplies, store backup energy and set delays

Everything so far explains why capacitors are so useful. Each use relies on storing charge and releasing it at a controlled rate.

  • Smoothing: a capacitor charges at each voltage peak and discharges between peaks, so the output varies less.
  • Backup power: stored energy keeps a memory chip running briefly if the main supply drops.
  • Camera flash: a slow charge, then a rapid discharge through a lamp.
  • Timing: the delay depends on RCRCRC, so the circuit switches after a known time.

Exam tip

In a uses question, link the property to the job. Say that the capacitor stores charge or energy and then releases it over a time set by RCRCRC.

Note read

Check your recall[15 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[2 marks]

    State what is meant by the capacitance of a capacitor.

    Show mark schemeHide mark scheme

    Model answer

    Capacitance is the charge stored per unit potential difference across the capacitor. It is given by C=QVC=\frac{Q}{V}C=VQ​ and measured in farads.

    • 1 mark for stating that capacitance is charge stored per unit potential difference
    • 1 mark for giving C=QVC=\frac{Q}{V}C=VQ​ or the unit, the farad
  2. 2.Calculate[3 marks]

    Calculate the energy stored in a 220 μF220\,\mu\mathrm{F}220μF capacitor charged to 9.0 V9.0\,\mathrm{V}9.0V.

    Show mark schemeHide mark scheme

    Model answer

    E=12CV2=12(220×10−6)(9.0)2=8.9×10−3 JE=\frac12CV^2=\frac12(220\times10^{-6})(9.0)^2=8.9\times10^{-3}\,\mathrm{J}E=21​CV2=21​(220×10−6)(9.0)2=8.9×10−3J.

    • 1 mark for using E=12CV2E=\frac12CV^2E=21​CV2
    • 1 mark for converting the capacitance to farads and substituting correctly
    • 1 mark for obtaining 8.9×10−3 J8.9\times10^{-3}\,\mathrm{J}8.9×10−3J
  3. 3.Give[2 marks]

    Give two ways to increase the capacitance of a parallel-plate capacitor.

    Show mark schemeHide mark scheme

    Model answer

    Increase the area of the plates. Decrease the separation of the plates. Using a dielectric with a higher permittivity also works.

    • 1 mark for giving one correct way, such as increasing the plate area
    • 1 mark for giving a second correct way, such as reducing the separation or using a dielectric of higher permittivity
  4. 4.Describe[3 marks]

    Describe how the current changes with time as a capacitor discharges through a resistor.

    Show mark schemeHide mark scheme

    Model answer

    The current is at its maximum when discharge starts. It then decreases exponentially. It falls steeply at first and levels off towards zero.

    • 1 mark for stating that the current is largest at the start
    • 1 mark for stating that it decreases exponentially
    • 1 mark for describing the steep fall followed by levelling off towards zero
  5. 5.Calculate[2 marks]

    Calculate the time constant of a circuit with a 4.7 μF4.7\,\mu\mathrm{F}4.7μF capacitor and a 220 kΩ220\,\mathrm{k\Omega}220kΩ resistor.

    Show mark schemeHide mark scheme

    Model answer

    RC=(2.2×105)(4.7×10−6)=1.0 sRC=(2.2\times10^{5})(4.7\times10^{-6})=1.0\,\mathrm{s}RC=(2.2×105)(4.7×10−6)=1.0s.

    • 1 mark for using RCRCRC with values in ohms and farads
    • 1 mark for obtaining 1.0 s1.0\,\mathrm{s}1.0s
  6. 6.Explain[3 marks]

    Explain how a capacitor can smooth a rectified supply.

    Show mark schemeHide mark scheme

    Model answer

    The capacitor charges when the supply potential difference rises towards a peak. It discharges through the load as the supply falls between peaks. This keeps the potential difference across the load more constant.

    • 1 mark for stating that the capacitor charges as the supply potential difference rises
    • 1 mark for stating that it discharges through the load as the supply falls
    • 1 mark for concluding that the potential difference across the load varies less

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

Identify the correct expression for the energy stored in a capacitor of capacitance CCC at potential difference VVV.
Show answer and explanation

Answer: C · Worked explanation

The energy is the area under the QQQ–VVV graph, a triangle, so E=12QVE=\frac12QVE=21​QV. Replacing QQQ with CVCVCV gives E=12CV2E=\frac12CV^2E=21​CV2. The expression CV2CV^2CV2 omits the factor of one half, which arises because the potential difference rises from zero. The expression 12C2V\frac12C^2V21​C2V has the wrong powers, because the capacitance appears only once in the energy.
4.

Medium·Calculate[2 marks]

Calculate the charge stored on a 220 μF220\,\mu\mathrm{F}220μF capacitor at a potential difference of 6.0 V6.0\,\mathrm{V}6.0V.
Show answer and explanation

Answer: D · Worked explanation

Q=CV=(220×10−6)(6.0)=1.3×10−3 CQ=CV=(220\times10^{-6})(6.0)=1.3\times10^{-3}\,\mathrm{C}Q=CV=(220×10−6)(6.0)=1.3×10−3C. The value 1.3×103 C1.3\times10^{3}\,\mathrm{C}1.3×103C comes from forgetting to convert microfarads to farads. The value 3.7×10−5 C3.7\times10^{-5}\,\mathrm{C}3.7×10−5C comes from dividing the capacitance by the potential difference. The result is 1.3 mC1.3\,\mathrm{mC}1.3mC. A capacitor of a few hundred microfarads at a few volts holds charge of the order of a millicoulomb, which is a useful check.
5.

Medium·Calculate[2 marks]

Calculate the energy stored in a 2200 μF2200\,\mu\mathrm{F}2200μF capacitor charged to 15 V15\,\mathrm{V}15V.
Show answer and explanation

Answer: A · Worked explanation

E=12CV2=12(2.2×10−3)(15)2≈0.25 JE=\frac12CV^2=\frac12(2.2\times10^{-3})(15)^2\approx0.25\,\mathrm{J}E=21​CV2=21​(2.2×10−3)(15)2≈0.25J. The value 0.50 J0.50\,\mathrm{J}0.50J omits the factor of one half. The value 1.7×10−2 J1.7\times10^{-2}\,\mathrm{J}1.7×10−2J comes from using 12CV\frac12CV21​CV, which does not square the potential difference. The value 3.3×10−2 J3.3\times10^{-2}\,\mathrm{J}3.3×10−2J is CVCVCV, which has the unit of charge rather than energy. Always check that your expression gives joules.
6.

Medium·Calculate[2 marks]

Calculate the time constant for a 100 μF100\,\mu\mathrm{F}100μF capacitor discharging through a 47 kΩ47\,\mathrm{k\Omega}47kΩ resistor.
Show answer and explanation

Answer: C · Worked explanation

RC=(4.7×104 Ω)(1.0×10−4 F)=4.7 sRC=(4.7\times10^{4}\,\Omega)(1.0\times10^{-4}\,\mathrm{F})=4.7\,\mathrm{s}RC=(4.7×104Ω)(1.0×10−4F)=4.7s. The value 3.3 s3.3\,\mathrm{s}3.3s is the time for the charge to halve, 0.69 RC0.69\,RC0.69RC, which is a different quantity. The value 4.7×10−3 s4.7\times10^{-3}\,\mathrm{s}4.7×10−3s comes from using 47 Ω47\,\Omega47Ω instead of 47 kΩ47\,\mathrm{k\Omega}47kΩ. The value 4.7×106 s4.7\times10^{6}\,\mathrm{s}4.7×106s comes from forgetting that a microfarad is 10−610^{-6}10−6 of a farad.
7.

Medium·Determine[2 marks]

A capacitor discharges through a resistor. Determine the percentage of its initial charge that remains after two time constants.
Show answer and explanation

Answer: C · Worked explanation

The charge is Q0e−t/RCQ_0e^{-t/RC}Q0​e−t/RC, so after t=2RCt=2RCt=2RC it is Q0e−2=0.135 Q0Q_0e^{-2}=0.135\,Q_0Q0​e−2=0.135Q0​, about 14%. A value of 37% is the fraction left after one time constant. A value of 25% treats the charge as halving each time constant, which is not how exponential decay with RCRCRC works. A value of 74% doubles the 37% instead of squaring the fraction e−1e^{-1}e−1.
8.

Hard·Predict[2 marks]

The plate area of a parallel-plate capacitor is doubled and the separation is halved. Predict the new capacitance compared with the original.
Show answer and explanation

Answer: D · Worked explanation

Capacitance is proportional to Ad\frac{A}{d}dA​. Doubling AAA doubles the capacitance and halving ddd doubles it again, so the capacitance is four times larger. A factor of two accounts for only one of the two changes. A factor of one quarter would need both changes to reduce the capacitance, but both raise it.
9.

Hard·Determine[2 marks]

A capacitor discharges through a resistor and its potential difference falls from 9.0 V9.0\,\mathrm{V}9.0V to 3.0 V3.0\,\mathrm{V}3.0V in 22 s22\,\mathrm{s}22s. Determine the time constant.
Show answer and explanation

Answer: C · Worked explanation

VV0=13=e−t/RC\frac{V}{V_0}=\frac13=e^{-t/RC}V0​V​=31​=e−t/RC, so tRC=ln⁡3=1.10\frac{t}{RC}=\ln3=1.10RCt​=ln3=1.10 and RC=221.10=20 sRC=\frac{22}{1.10}=20\,\mathrm{s}RC=1.1022​=20s. The value 32 s32\,\mathrm{s}32s comes from using ln⁡2\ln2ln2, which applies to halving rather than to a fall to one third. The value 7.3 s7.3\,\mathrm{s}7.3s comes from dividing the time by 3. The value 66 s66\,\mathrm{s}66s comes from multiplying the time by 3 instead of dividing by ln⁡3\ln3ln3.
10.

Hard·Identify[2 marks]

An uncharged capacitor is connected in series with a resistor to a battery. Identify what is true at the instant of connection.
Show answer and explanation

Answer: B · Worked explanation

At the start there is no charge on the plates, so the capacitor’s potential difference is zero and the whole battery potential difference is across the resistor. The current is therefore at its maximum. The reverse situation, with zero current and full potential difference across the capacitor, describes the end of charging.

Keep going

Next topic3.7.5 Magnetic fieldsPrevious topic3.7.3 Electric fields

More in Section 3.7 · Fields and their consequences

  1. 3.7.1FieldsNotes · 10 questions
  2. 3.7.2Gravitational fieldsNotes · 10 questions
  3. 3.7.3Electric fieldsNotes · 10 questions
  4. 3.7.4CapacitanceNotes · 10 questions
  5. 3.7.5Magnetic fieldsNotes · 10 questions

All AQA A-level Physics topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/6 read

  1. 1A capacitor stores charge on two separated plates
  2. 2Plate area, separation and insulator set the capacitance
  3. 3Stored energy equals the area under a charge graph
  4. 4Capacitors charge and discharge along exponential curves
  5. 5The time constant sets how quickly a capacitor discharges
  6. 6Capacitors smooth supplies, store backup energy and set delays
  7. Check your recall
  8. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe

Charge against potential difference

Charge Q (μC)024681002004006008001000Potential difference V (V)
  • Q = CV, C = 100 μF

Charging and discharging curves

Potential difference V (V)05101520253035400123456Time t (s)
  • Discharging
  • Charging