Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA GCSE Combined Science: Trilogy
  3. ›6.3 Physics: Particle model of matter
  4. ›6.3.2 Internal energy and energy transfers

AQA GCSE Combined Science: Trilogy · Section 6.3 · Physics: Particle model of matter

6.3.2 Internal energy and energy transfers

Explain how heating changes internal energy, calculate energy transfers, and interpret heating and cooling graphs.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Internal energy includes particle movement and positions
  1. 1Internal energy includes particle movement and positions
  2. 2Specific heat capacity links energy transfer to temperature change
  3. 3Latent heat changes state without changing temperature
  4. 4Flat graph sections show changes of state
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Internal energy includes particle movement and positions

Internal energy is the total energy of particles in a system. It includes their kinetic energy, which comes from movement. It also includes energy associated with their positions relative to each other. A system might be a block of metal or water in a beaker.

Heating transfers energy into a substance and increases its internal energy. Sometimes its temperature rises because its particles move faster on average. During a change of state, its temperature can stay constant instead. The transferred energy then changes the particles’ positions relative to each other.

Common mistake

Internal energy is not just the energy of moving particles. It also includes energy associated with their positions.

Key terms · tap one for its definition

Internal energy

Internal energy is the total kinetic energy and energy associated with the relative positions of particles in a system.

kinetic energy

Kinetic energy is the energy a particle has because it moves.

Part 1 done

2

Part 2 of 4: Specific heat capacity links energy transfer to temperature change

Specific heat capacity is the energy needed to raise one kilogram of a substance by 1 °C. It describes heating without a change of state. A substance with a higher specific heat capacity needs more energy for the same mass and temperature rise.

Calculate the energy transferred using ΔE=mcΔθ\Delta E=mc\Delta\thetaΔE=mcΔθ. Here, EEE is energy in joules, mmm is mass in kilograms, and ccc is specific heat capacity in J/kg °C−1\mathrm{J/kg\,°C^{-1}}J/kg°C−1. The temperature change, Δθ\Delta\thetaΔθ, is the final temperature minus the initial temperature.

Worked example

Heating a block

A 2 kg block has a specific heat capacity of 500 J/kg °C−1500\,\mathrm{J/kg\,°C^{-1}}500J/kg°C−1. Its temperature rises from 10 °C to 30 °C. Calculate the energy transferred.
  1. 1
    Δθ=30−10=20 °C\Delta\theta=30-10=20\,°CΔθ=30−10=20°C.
  2. 2
    ΔE=mcΔθ\Delta E=mc\Delta\thetaΔE=mcΔθ.
  3. 3
    E=2×500×20=20 000 JE=2\times500\times20=20\,000\,\mathrm{J}E=2×500×20=20000J.

Answer: The energy transferred is 20,000 J.

Key terms · tap one for its definition

Specific heat capacity

Specific heat capacity is the energy needed to raise the temperature of one kilogram of a substance by 1 °C.

temperature change

Temperature change is the final temperature minus the initial temperature.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify what is meant by the internal energy of a system.
Show answer and explanation

Answer: A · Worked explanation

Internal energy is the sum of the kinetic and potential energies of all the particles in a system. The kinetic energy of the system moving as a whole is not included; it describes the motion of the system rather than the random motion of its particles.
3

Part 3 of 4: Latent heat changes state without changing temperature

Specific latent heat is the energy needed to change the state of one kilogram of a substance. Its temperature does not change. Unlike specific heat capacity, it describes a change of state, not a temperature change. Its unit is J/kg\mathrm{J/kg}J/kg.

The specific latent heat of fusion applies when a solid melts into a liquid. The specific latent heat of vaporisation applies when a liquid becomes a gas. During either change, heating increases internal energy while temperature stays constant. Energy changes the particles’ positions relative to each other rather than increasing their average kinetic energy.

Exam tip

When comparing the two quantities, state what happens to temperature and whether the substance changes state.

Key terms · tap one for its definition

Specific latent heat

Specific latent heat is the energy needed to change the state of one kilogram of a substance without changing its temperature.

specific latent heat of fusion

Specific latent heat of fusion is the energy needed to melt one kilogram of a solid without changing its temperature.

Part 3 done

4

Part 4 of 4: Flat graph sections show changes of state

On a heating graph, a rising line shows increasing temperature. Particles gain kinetic energy on average. A plateau shows a change of state at constant temperature. During melting and boiling, energy continues to enter the substance, so its internal energy still increases.

A cooling graph runs through the changes in the opposite direction. Falling sections show decreasing temperature. Flat sections show condensation or freezing while energy leaves the substance. For a pure substance at a fixed pressure, melting and freezing occur at the same temperature. Boiling and condensation also occur at the same temperature. A flat section does not mean that energy transfer has stopped.

Figure 1. Temperature changes on sloping sections and stays constant on flat sections. The cooling path follows the heating path in reverse.

Key terms · tap one for its definition

heating graph

A heating graph shows how a substance’s temperature changes as energy is transferred into it.

plateau

A plateau is a flat section of a temperature graph where a change of state occurs.

Note read

Check your recall[14 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Define[2 marks]

    Define internal energy.

    Show mark schemeHide mark scheme

    Model answer

    Internal energy is the total energy of particles in a system. It includes kinetic energy and energy associated with their relative positions.

    • 1 mark for stating that internal energy is the total energy of particles in a system
    • 1 mark for including both kinetic energy and energy associated with particles’ relative positions
  2. 2.Explain[3 marks]

    Explain why heating a substance can increase its internal energy without raising its temperature.

    Show mark schemeHide mark scheme

    Model answer

    During a change of state, energy enters the substance and increases its internal energy. It changes the particles’ positions relative to each other rather than increasing their average kinetic energy, so temperature stays constant.

    • 1 mark for identifying that the substance is changing state
    • 1 mark for stating that transferred energy changes the particles’ relative positions
    • 1 mark for linking constant average kinetic energy to constant temperature
  3. 3.Compare[3 marks]

    Compare specific heat capacity with specific latent heat.

    Show mark schemeHide mark scheme

    Model answer

    Both describe energy transferred per kilogram. Specific heat capacity concerns a 1 °C temperature rise without changing state. Specific latent heat concerns a change of state without changing temperature.

    • 1 mark for stating that both describe energy transferred per kilogram
    • 1 mark for linking specific heat capacity to a temperature rise without a change of state
    • 1 mark for linking specific latent heat to a change of state at constant temperature
  4. 4.Calculate[3 marks]

    Calculate the energy needed to raise 3 kg of a substance by 4 °C. Its specific heat capacity is 800 J/kg °C−1800\,\mathrm{J/kg\,°C^{-1}}800J/kg°C−1.

    Show mark schemeHide mark scheme

    Model answer

    Using ΔE=mcΔθ\Delta E=mc\Delta\thetaΔE=mcΔθ, E=3×800×4=9 600 JE=3\times800\times4=9\,600\,\mathrm{J}E=3×800×4=9600J.

    • 1 mark for using ΔE=mcΔθ\Delta E=mc\Delta\thetaΔE=mcΔθ
    • 1 mark for substituting 3×800×43\times800\times43×800×4
    • 1 mark for obtaining 9 600 J9\,600\,\mathrm{J}9600J
  5. 5.Explain[3 marks]

    Explain what sloping and flat sections mean on a cooling graph.

    Show mark schemeHide mark scheme

    Model answer

    On sloping sections, temperature falls. On flat sections, the substance changes state by condensation or freezing. Energy continues to leave the substance while its temperature stays constant.

    • 1 mark for linking sloping sections to falling temperature
    • 1 mark for linking flat sections to condensation or freezing
    • 1 mark for stating that energy leaves during a flat section despite constant temperature

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·State[1 mark]

State what usually happens to the internal energy of a substance when it is heated.
Show answer and explanation

Answer: A · Worked explanation

Heating transfers energy to a substance, so its internal energy increases. The energy may increase the particles' kinetic energy, their potential energy, or both, depending on whether the substance warms or changes state.
3.

Easy·Identify[1 mark]

Which statement identifies the difference between specific heat capacity and specific latent heat?
Show answer and explanation

Answer: C · Worked explanation

Specific heat capacity is the energy needed to raise the temperature of one kilogram of a substance by one degree Celsius. Specific latent heat is the energy needed to change the state of one kilogram without changing its temperature. The tempting idea that both describe temperature change confuses these distinct processes.
4.

Easy·State[1 mark]

State the equation used to calculate the energy transferred when a substance changes temperature without changing state.
Show answer and explanation

Answer: B · Worked explanation

For a temperature change without a change of state, the energy transferred is E=mcΔTE = mc\Delta TE=mcΔT, where mmm is mass, ccc is specific heat capacity and ΔT\Delta TΔT is the temperature change. The equation E=mLE = mLE=mL instead applies to a change of state.
5.

Medium·Explain[2 marks]

A sealed container of gas is heated while its volume remains constant. Explain what happens to the gas's internal energy and temperature.
Show answer and explanation

Answer: A · Worked explanation

Heating transfers energy to the gas, increasing its internal energy. With the volume fixed, the particles' average kinetic energy increases, so the temperature rises; a fixed volume does not prevent a temperature change. The tempting claim that the temperature must stay constant confuses constant volume with constant temperature.
6.

Medium·Calculate[2 marks]

A 0.50 kg0.50\,\text{kg}0.50kg metal block with specific heat capacity 400 J kg−1 ∘C−1400\,\text{J kg}^{-1}\,^{\circ}\text{C}^{-1}400J kg−1∘C−1 warms from 20 ∘C20\,^{\circ}\text{C}20∘C to 50 ∘C50\,^{\circ}\text{C}50∘C. Calculate the energy transferred to it.
Show answer and explanation

Answer: D · Worked explanation

Use E=mcΔTE = mc\Delta TE=mcΔT. The temperature change is 50−20=30 ∘C50 - 20 = 30\,^{\circ}\text{C}50−20=30∘C, so E=0.50×400×30=6,000 JE = 0.50 \times 400 \times 30 = 6{,}000\,\text{J}E=0.50×400×30=6,000J. The 4,000 J4{,}000\,\text{J}4,000J result uses the initial temperature of 20 ∘C20\,^{\circ}\text{C}20∘C as the temperature change instead of subtracting it from the final temperature.
7.

Medium·Determine[2 marks]

A sample receives energy while its temperature stays at 100 ∘C100\,^{\circ}\text{C}100∘C and it changes from liquid to gas. Determine which quantity describes the energy needed per kilogram for this process.
Show answer and explanation

Answer: D · Worked explanation

The sample changes from liquid to gas without a temperature change, so the relevant quantity is the specific latent heat of vaporisation. Specific latent heat of fusion describes a solid-to-liquid or liquid-to-solid change, while specific heat capacity applies when temperature changes.
8.

Medium·Interpret[2 marks]

During heating, a solid's temperature rises from 10 ∘C10\,^{\circ}\text{C}10∘C to 40 ∘C40\,^{\circ}\text{C}40∘C, stays at 40 ∘C40\,^{\circ}\text{C}40∘C while the solid melts, then rises again. Interpret the constant-temperature section.
Show answer and explanation

Answer: B · Worked explanation

During melting, the energy supplied is used to change the arrangement of particles, increasing their potential energy while the temperature remains constant. A flat section does not mean energy transfer has stopped; it indicates a change of state rather than a temperature rise.
9.

Medium·Deduce[2 marks]

A substance cools from 80 ∘C80\,^{\circ}\text{C}80∘C to 50 ∘C50\,^{\circ}\text{C}50∘C, stays at 50 ∘C50\,^{\circ}\text{C}50∘C for a time, and then cools further. Deduce what is happening during the constant-temperature section.
Show answer and explanation

Answer: B · Worked explanation

A constant-temperature section during cooling indicates a change of state. The substance releases energy to its surroundings as particles change arrangement, even though the temperature does not fall during this section. It has not stopped transferring energy, as the tempting interpretation of a flat section might suggest.
10.

Hard·Calculate[2 marks]

A 0.20 kg0.20\,\text{kg}0.20kg sample warms from 15 ∘C15\,^{\circ}\text{C}15∘C to 45 ∘C45\,^{\circ}\text{C}45∘C after receiving 2,400 J2{,}400\,\text{J}2,400J of energy. Calculate its specific heat capacity.
Show answer and explanation

Answer: D · Worked explanation

Rearrange E=mcΔTE = mc\Delta TE=mcΔT to give c=E/(mΔT)c = E/(m\Delta T)c=E/(mΔT). Here, ΔT=45−15=30 ∘C\Delta T = 45 - 15 = 30\,^{\circ}\text{C}ΔT=45−15=30∘C, so c=2,400/(0.20×30)=400 J kg−1 ∘C−1c = 2{,}400/(0.20 \times 30) = 400\,\text{J kg}^{-1}\,^{\circ}\text{C}^{-1}c=2,400/(0.20×30)=400J kg−1∘C−1. The tempting 80 J kg−1 ∘C−180\,\text{J kg}^{-1}\,^{\circ}\text{C}^{-1}80J kg−1∘C−1 result comes from dividing the energy by the temperature change only, leaving out the mass.

Keep going

Next topic6.3.3 Particle model and gas pressurePrevious topic6.3.1 Changes of state and density

More in Section 6.3 · Physics: Particle model of matter

  1. 6.3.1Changes of state and densityNotes · 10 questions
  2. 6.3.2Internal energy and energy transfersNotes · 10 questions
  3. 6.3.3Particle model and gas pressureNotes · 8 questions

All AQA GCSE Combined Science: Trilogy topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/4 read

  1. 1Internal energy includes particle movement and positions
  2. 2Specific heat capacity links energy transfer to temperature change
  3. 3Latent heat changes state without changing temperature
  4. 4Flat graph sections show changes of state
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe