Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA GCSE Combined Science: Trilogy
  3. ›6.3 Physics: Particle model of matter
  4. ›6.3.3 Particle model and gas pressure

AQA GCSE Combined Science: Trilogy · Section 6.3 · Physics: Particle model of matter

6.3.3 Particle model and gas pressure

Explain how gas particles create pressure and how temperature affects their speed and pressure.

  • 3 min read
  • 4 parts
  • 8 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 8 questions
1/4Gas particles move freely through their container
  1. 1Gas particles move freely through their container
  2. 2Collisions with the walls produce gas pressure
  3. 3Higher gas temperature means faster particles on average
  4. 4Heating a sealed rigid container raises gas pressure
  5. Check your recall
  6. Practice: 8 questions
1

Part 1 of 4: Gas particles move freely through their container

A gas contains particles that move constantly in random directions. They travel through the available space and collide with each other. Between collisions, a particle moves in a straight line. This random motion means particles reach every part of the container. Their speeds vary: some move faster than others at any given moment.

The average speed describes the motion of the particles as a group. It does not mean every particle travels at that speed. Gas particles are far apart compared with particles in solids and liquids. This leaves them room to move throughout the container.

Key terms · tap one for its definition

random motion

Random motion is movement in changing directions, with no single direction followed by all the particles.

average speed

Average speed describes the overall speed of a group of particles, whose individual speeds vary.

Part 1 done

2

Part 2 of 4: Collisions with the walls produce gas pressure

Gas particles repeatedly strike the walls of their container. Each collision changes a particle’s direction and exerts a force on the wall. Many collisions occur across the wall. Their combined force produces pressure, which is force per unit area.

Particles also collide with one another, but pressure on a wall comes from particles striking that wall. The pressure acts on every inside surface, not just the bottom. A flexible container can change shape as the gas pushes against it.

Figure 1. Moving particles change direction when they strike a wall. Collisions across the wall produce a combined force.

Common mistake

Gas pressure is not caused by particles resting against a wall. Moving particles exert force when they collide with it.

Key terms · tap one for its definition

collision

A collision occurs when a moving particle strikes another particle or a surface and changes its motion.

pressure

Pressure is the force exerted per unit area of a surface.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify how gas particles exert pressure on the walls of their container.
Show answer and explanation

Answer: A · Worked explanation

Gas particles move randomly and repeatedly collide with the container walls. Each collision changes a particle’s momentum and exerts a force on the wall; the combined force of many collisions produces gas pressure. Gravity and heat transfer do not explain how the particles exert that pressure.
3

Part 3 of 4: Higher gas temperature means faster particles on average

The temperature of a gas is linked to the average kinetic energy of its particles. When its temperature rises, that average kinetic energy rises. The particles therefore move faster on average. Individual speeds still differ, so not every particle gains the same speed.

A lower temperature means less average kinetic energy and slower motion on average. Temperature does not tell you the speed of one particular particle. Instead, it describes a property of the gas as a whole. Faster particles can reach a container wall more often, provided its volume stays fixed.

Key term

temperature

A gas’s temperature is linked to the average kinetic energy of its particles.

Part 3 done

4

Part 4 of 4: Heating a sealed rigid container raises gas pressure

In a sealed rigid container, gas cannot escape and the volume cannot change. Heating the gas raises its temperature, so its particles move faster on average. They strike the walls more often. On average, wall collisions transfer more momentum to the wall and exert a greater force during impacts.

These changes increase the force exerted on each area of wall. The gas pressure rises. This explanation depends on the container remaining rigid. A flexible container may expand when heated, so its pressure need not rise in the same way.

Exam tip

For a sealed rigid container, link higher temperature to faster particles, then to stronger and more frequent wall collisions.

Key term

sealed rigid container

A sealed rigid container prevents gas escaping and keeps its volume fixed.

Note read

Check your recall[13 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Describe[2 marks]

    Describe how gas particles move inside a container.

    Show mark schemeHide mark scheme

    Model answer

    Gas particles move constantly in random directions. They travel in straight lines between collisions.

    • 1 mark for stating that particles move constantly in random directions
    • 1 mark for stating that particles travel in straight lines between collisions
  2. 2.Explain[3 marks]

    Explain how a gas exerts pressure on a container wall.

    Show mark schemeHide mark scheme

    Model answer

    Moving gas particles collide with the wall. Each collision exerts a force on it. The combined force across an area produces pressure.

    • 1 mark for stating that moving gas particles collide with the wall
    • 1 mark for stating that collisions exert a force on the wall
    • 1 mark for linking the force per unit area to pressure
  3. 3.Explain[2 marks]

    Explain what happens to particle motion when a gas becomes hotter.

    Show mark schemeHide mark scheme

    Model answer

    Its particles have greater average kinetic energy, so they move faster on average.

    • 1 mark for stating that the particles’ average kinetic energy increases
    • 1 mark for stating that their average speed increases
  4. 4.Explain[4 marks]

    Explain why heating a gas raises its pressure in a sealed rigid container.

    Show mark schemeHide mark scheme

    Model answer

    The gas cannot escape and its volume stays fixed. Heating makes its particles move faster on average. They collide with the walls more often and exert a greater force during each collision. The increased force per unit area raises the pressure.

    • 1 mark for stating that the amount of gas and container volume stay fixed
    • 1 mark for stating that the particles move faster on average
    • 1 mark for stating that wall collisions become more frequent and exert greater force
    • 1 mark for linking greater force per unit area to higher pressure
  5. 5.Suggest[2 marks]

    Suggest why heating a gas in a flexible container may not raise its pressure in the same way.

    Show mark schemeHide mark scheme

    Model answer

    The flexible container can expand, increasing the gas volume. This can reduce how often particles strike each area of wall.

    • 1 mark for stating that the flexible container can expand
    • 1 mark for linking the greater volume to fewer collisions per unit area of wall

Practice this topic

8 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 8 answered

Includes the quick check in the note above.

2.

Easy·State[1 mark]

State what happens to the pressure when a gas in a sealed, rigid container is heated.
Show answer and explanation

Answer: D · Worked explanation

Heating the gas in a sealed, rigid container increases its pressure. The volume cannot change, so the gas particles continue to occupy the same space while their motion changes. The pressure does not stay constant because the particles’ collisions with the walls become more forceful and frequent.
3.

Easy·Identify[1 mark]

Identify the change in particle motion when the temperature of a gas increases.
Show answer and explanation

Answer: C · Worked explanation

A higher gas temperature means the particles have greater average kinetic energy, so their average speed is higher. Their speeds are not all identical because particles have a range of speeds. Heating does not make the particles stop moving between collisions.
4.

Easy·Describe[1 mark]

Describe the direction in which gas particles move inside a container between collisions.
Show answer and explanation

Answer: D · Worked explanation

Between collisions, gas particles travel in random directions. They may collide with other particles or with the container walls, then change direction. They do not all travel towards the nearest wall, follow one circular path, or remain still between collisions.
5.

Medium·Explain[2 marks]

A sealed, rigid vessel of gas is warmed. Explain why the pressure on its walls increases.
Show answer and explanation

Answer: A · Worked explanation

Heating increases the particles’ average kinetic energy and therefore their average speed. They collide with the walls more often and each collision produces a greater change in momentum, increasing the force on the walls and hence the pressure. The particles do not expand or become heavier when heated.
6.

Medium·Determine[2 marks]

A gas exerts a force of 240 N240\,\text{N}240N on a container wall with area 0.080 m20.080\,\text{m}^20.080m2. Determine the pressure on that wall using p=F/Ap=F/Ap=F/A.
Show answer and explanation

Answer: A · Worked explanation

Pressure is force divided by area: p=F/A=240 N/0.080 m2=3,000 Pap=F/A=240\,\text{N}/0.080\,\text{m}^2=3{,}000\,\text{Pa}p=F/A=240N/0.080m2=3,000Pa. The tempting value 19.2 Pa19.2\,\text{Pa}19.2Pa comes from multiplying the force by the area rather than dividing. Pressure describes force per unit area.
7.

Medium·Compare[2 marks]

Two identical sealed, rigid containers hold the same amount of gas. Container X is at a higher temperature than container Y. Compare the gas pressures.
Show answer and explanation

Answer: A · Worked explanation

The higher temperature in X gives its particles greater average kinetic energy and speed. In the same fixed volume, they collide with the walls more often and with greater force, so X has the higher pressure. Having the same amount of gas does not make the pressures equal when the temperatures differ.
8.

Medium·Explain[2 marks]

A student says, “At a higher temperature, every gas particle must move faster than every particle at a lower temperature.” Explain which statement about gas particle speeds is more accurate.
Show answer and explanation

Answer: A · Worked explanation

A higher temperature corresponds to greater average kinetic energy and therefore a higher average particle speed. However, gas particles have a range of speeds, so it is not true that every particle in the warmer sample must outrun every particle in the cooler sample. Collisions do not make temperature unrelated to particle motion.

Keep going

Next topic6.4.1 Atoms and isotopesPrevious topic6.3.2 Internal energy and energy transfers

More in Section 6.3 · Physics: Particle model of matter

  1. 6.3.1Changes of state and densityNotes · 10 questions
  2. 6.3.2Internal energy and energy transfersNotes · 10 questions
  3. 6.3.3Particle model and gas pressureNotes · 8 questions

All AQA GCSE Combined Science: Trilogy topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/4 read

  1. 1Gas particles move freely through their container
  2. 2Collisions with the walls produce gas pressure
  3. 3Higher gas temperature means faster particles on average
  4. 4Heating a sealed rigid container raises gas pressure
  5. Check your recall
  6. Practice: 8 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe