Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA GCSE Combined Science: Trilogy
  3. ›6.3 Physics: Particle model of matter
  4. ›6.3.1 Changes of state and density

AQA GCSE Combined Science: Trilogy · Section 6.3 · Physics: Particle model of matter

6.3.1 Changes of state and density

Describe particle arrangements and changes of state, distinguish physical from chemical changes, and calculate density.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Particle arrangement determines whether matter flows or keeps its shape
  1. 1Particle arrangement determines whether matter flows or keeps its shape
  2. 2Changes of state alter particle movement, not particle identity
  3. 3Density compares mass with the volume it occupies
  4. 4Physical changes can be reversed without making new substances
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Particle arrangement determines whether matter flows or keeps its shape

In a solid, particles are close together in a fixed arrangement. They vibrate but do not move past one another. A solid keeps its shape and volume. In a liquid, particles remain close together but move past one another. A liquid flows and takes the shape of its container. Its volume stays nearly constant.

In a gas, particles are far apart and move rapidly in different directions. A gas spreads out to fill its container. The large spaces between its particles make it much easier to compress than a solid or liquid.

Figure 1. Compare the spacing and positions of the particles. Each circle represents a particle of the same substance.

Key terms · tap one for its definition

solid

A solid has closely packed particles in fixed positions and keeps its shape and volume.

liquid

A liquid has closely packed particles that move past one another and takes its container’s shape.

gas

A gas has widely spaced, moving particles and spreads out to fill its container.

Part 1 done

2

Part 2 of 4: Changes of state alter particle movement, not particle identity

Heating can cause melting, when a solid becomes a liquid. Further heating can cause boiling, when liquid becomes gas throughout the liquid. Evaporation also produces gas, but only from the liquid surface. Particles move further apart as a liquid becomes a gas.

Cooling can cause condensation, when gas becomes liquid, or freezing, when liquid becomes solid. Particles move closer together as a gas condenses. During freezing, they settle into fixed positions and continue vibrating. These changes do not create a new substance. The particles remain the same substance before and after each change.

Common mistake

Melting does not turn particles into liquid particles. The same particles remain, but their arrangement and movement change.

Key terms · tap one for its definition

melting

Melting is the change of state from solid to liquid.

boiling

Boiling is the change from liquid to gas throughout the liquid.

evaporation

Evaporation is the change from liquid to gas at the liquid surface.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the description of particle arrangement in a solid.
Show answer and explanation

Answer: C · Worked explanation

In a solid, particles are packed closely together in a fixed arrangement. They vibrate about fixed positions but do not move freely from place to place. The description of particles moving past one another applies to a liquid, while particles far apart and moving randomly describe a gas.
3

Part 3 of 4: Density compares mass with the volume it occupies

Density is mass divided by volume: ρ=mV\rho=\frac{m}{V}ρ=Vm​. A material has greater density when more mass occupies the same volume. Common units are kg/m3\mathrm{kg/m^3}kg/m3 and g/cm3\mathrm{g/cm^3}g/cm3. Use matching mass and volume units before calculating.

Measure mass with a balance. Find the volume of a regular block by multiplying its length, width and height. For an irregular object, measure the volume of water it displaces. Its volume equals the rise in the water reading.

Worked example

Finding a block’s density

A block has a mass of 120 g. Its length, width and height are 5 cm, 3 cm and 2 cm. Calculate its density.
  1. 1
    Volume =5×3×2=30 cm3=5\times3\times2=30\ \mathrm{cm^3}=5×3×2=30 cm3.
  2. 2
    Density =120 g30 cm3=4 g/cm3=\frac{120\ \mathrm{g}}{30\ \mathrm{cm^3}}=4\ \mathrm{g/cm^3}=30 cm3120 g​=4 g/cm3.

Answer: The block’s density is 4 g/cm34\ \mathrm{g/cm^3}4 g/cm3.

Exam tip

Write the density equation, substitute values with matching units, and give units in your answer.

Key terms · tap one for its definition

density

Density is the mass of a material divided by the volume it occupies.

mass

Mass is the amount of matter in an object.

volume

Volume is the amount of space an object occupies.

Part 3 done

4

Part 4 of 4: Physical changes can be reversed without making new substances

A physical change changes a substance’s form without producing a new substance. Changes of state are physical changes. Water can freeze into ice, then melt back into liquid water. Water vapour can also condense into liquid water. These are examples of reversible changes.

A chemical change produces one or more new substances. Burning a material is a chemical change, not a change of state. Cooling the products does not restore the original material. Reversibility alone is not the definition of a physical change. The key distinction is whether a new substance forms.

Exam tip

When comparing changes, state whether a new substance forms. Then describe what happens to the particles.

Key terms · tap one for its definition

physical change

A physical change changes a substance’s form without producing a new substance.

chemical change

A chemical change produces one or more new substances.

Note read

Check your recall[14 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Compare[4 marks]

    Compare the arrangement and movement of particles in a solid, liquid and gas.

    Show mark schemeHide mark scheme

    Model answer

    Solid particles are close together in fixed positions and vibrate. Liquid particles remain close together but move past one another. Gas particles are far apart and move rapidly in different directions.

    • 1 mark for stating that solid particles are close together in fixed positions
    • 1 mark for stating that solid particles vibrate
    • 1 mark for stating that liquid particles are close together but move past one another
    • 1 mark for stating that gas particles are far apart and move rapidly in different directions
  2. 2.Explain[2 marks]

    Explain what happens to particles when a liquid freezes.

    Show mark schemeHide mark scheme

    Model answer

    The particles settle into fixed positions. They continue vibrating rather than moving past one another.

    • 1 mark for stating that the particles settle into fixed positions
    • 1 mark for stating that the particles continue vibrating rather than moving past one another
  3. 3.Calculate[3 marks]

    Calculate the density of an object with a mass of 90 g and a volume of 30 cm³.

    Show mark schemeHide mark scheme

    Model answer

    Density =mV=90 g30 cm3=3 g/cm3=\frac{m}{V}=\frac{90\ \mathrm{g}}{30\ \mathrm{cm^3}}=3\ \mathrm{g/cm^3}=Vm​=30 cm390 g​=3 g/cm3.

    • 1 mark for using density equal to mass divided by volume
    • 1 mark for substituting 90 g and 30 cm³ and obtaining 3
    • 1 mark for giving the unit g/cm3\mathrm{g/cm^3}g/cm3
  4. 4.Give[2 marks]

    Give two reversible changes of state involving water.

    Show mark schemeHide mark scheme

    Model answer

    Water can freeze into ice and melt back into liquid water. Water vapour can condense into liquid water, which can evaporate again.

    • 1 mark for giving freezing and melting as a reversible pair
    • 1 mark for giving condensation and evaporation as a reversible pair
  5. 5.Explain[3 marks]

    Explain why melting ice is a physical change but burning a material is a chemical change.

    Show mark schemeHide mark scheme

    Model answer

    Melting changes the particles’ arrangement and movement without making a new substance. Burning produces new substances, so it is a chemical change.

    • 1 mark for stating that melting changes particle arrangement or movement
    • 1 mark for stating that melting does not produce a new substance
    • 1 mark for stating that burning produces one or more new substances

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Identify[1 mark]

Identify a change that is physical and can be reversed by changing the conditions.
Show answer and explanation

Answer: B · Worked explanation

Melting wax is a change of state, and cooling can return the liquid wax to a solid. No new substance is made, so this is a reversible physical change. Burning wood, rusting iron and cooking an egg involve chemical changes that produce substances with different properties.
3.

Easy·State[1 mark]

State what happens to particles when a liquid freezes to form a solid.
Show answer and explanation

Answer: A · Worked explanation

As a liquid freezes, its particles lose energy and become arranged in fixed positions. They continue to vibrate; they do not stop moving completely. Gaining energy and moving more freely describes changes towards a liquid or gas, rather than freezing.
4.

Easy·Identify[1 mark]

Identify the change that involves a chemical reaction rather than only a change of state.
Show answer and explanation

Answer: D · Worked explanation

When a metal reacts with oxygen, a new substance, the metal oxide, is formed, so this is a chemical change. Freezing, evaporation and condensation are changes of state: the substance remains water, even though its physical state changes.
5.

Medium·Calculate[1 mark]

Calculate the density of a block with a mass of 180 g180\,\text{g}180g and a volume of 60 cm360\,\text{cm}^360cm3.
Show answer and explanation

Answer: B · Worked explanation

Density is mass divided by volume: ρ=m/V=180 g/60 cm3=3.0 g/cm3\rho = m/V = 180\,\text{g} / 60\,\text{cm}^3 = 3.0\,\text{g/cm}^3ρ=m/V=180g/60cm3=3.0g/cm3. The tempting value 0.33 g/cm30.33\,\text{g/cm}^30.33g/cm3 comes from dividing the volume by the mass, which reverses the required calculation.
6.

Medium·Explain[2 marks]

A liquid is heated until it boils. Explain how the particles change as the liquid becomes a gas.
Show answer and explanation

Answer: A · Worked explanation

Heating transfers energy to the particles, allowing them to overcome the attractive forces holding them close together in the liquid. In the gas, they are far apart and move randomly in all directions. Particles in a solid vibrate about fixed positions, while losing energy is not what happens during boiling.
7.

Medium·Distinguish[2 marks]

A student warms ice until it becomes liquid water, then passes an electric current through the water and collects hydrogen and oxygen. Which description correctly distinguishes the two changes?
Show answer and explanation

Answer: D · Worked explanation

Melting changes water from a solid to a liquid but does not make a new substance, so it is physical. Splitting water into hydrogen and oxygen produces different substances, so it is chemical. A change in state alone does not make a change chemical, and chemical reactions rearrange atoms rather than destroy them.
8.

Medium·Determine[2 marks]

A sample has a mass of 0.54 kg0.54\,\text{kg}0.54kg and a volume of 200 cm3200\,\text{cm}^3200cm3. Determine its density in g/cm3\text{g/cm}^3g/cm3.
Show answer and explanation

Answer: D · Worked explanation

First convert the mass: 0.54 kg=540 g0.54\,\text{kg} = 540\,\text{g}0.54kg=540g. Then divide by the volume: ρ=540 g/200 cm3=2.7 g/cm3\rho = 540\,\text{g} / 200\,\text{cm}^3 = 2.7\,\text{g/cm}^3ρ=540g/200cm3=2.7g/cm3. The value 0.0027 g/cm30.0027\,\text{g/cm}^30.0027g/cm3 results from using the mass in kilograms without converting it to the units required.
9.

Medium·Compare[2 marks]

Compare the movement of particles in a liquid with their movement in a gas.
Show answer and explanation

Answer: B · Worked explanation

Liquid particles remain close together but can move past one another, allowing a liquid to flow. Gas particles are much farther apart and travel freely in random directions. Vibrating in fixed positions is characteristic of a solid, not a liquid.
10.

Medium·Identify[1 mark]

Identify the example that is a reversible physical change.
Show answer and explanation

Answer: B · Worked explanation

Condensation changes water vapour into liquid water, and evaporation can change it back into water vapour. These are physical changes that do not form a new substance. Burning, souring and digestion involve chemical changes, so simply reversing the conditions does not restore the original material.

Keep going

Next topic6.3.2 Internal energy and energy transfersPrevious topic6.2.4 Energy transfers in circuits

More in Section 6.3 · Physics: Particle model of matter

  1. 6.3.1Changes of state and densityNotes · 10 questions
  2. 6.3.2Internal energy and energy transfersNotes · 10 questions
  3. 6.3.3Particle model and gas pressureNotes · 8 questions

All AQA GCSE Combined Science: Trilogy topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/4 read

  1. 1Particle arrangement determines whether matter flows or keeps its shape
  2. 2Changes of state alter particle movement, not particle identity
  3. 3Density compares mass with the volume it occupies
  4. 4Physical changes can be reversed without making new substances
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe