Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›Edexcel A-level Biology A (Salters-Nuffield)
  3. ›5 On the Wild Side
  4. ›5.16 Temperature and enzyme activity

Edexcel A-level Biology A (Salters-Nuffield) · Topic 5 · On the Wild Side

5.16 Temperature and enzyme activity

Explain how temperature changes enzyme activity, describe the optimum temperature, and interpret data on enzyme rates at different temperatures.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Warmer conditions make enzyme reactions faster at first
  1. 1Warmer conditions make enzyme reactions faster at first
  2. 2Too much heat changes the enzyme’s shape and stops it working
  3. 3The optimum temperature gives the highest enzyme activity
  4. 4Low temperatures slow enzymes without damaging their shape
  5. 5Rates calculated from experimental data reveal the optimum
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Warmer conditions make enzyme reactions faster at first

Sugar dissolves faster in hot tea than in cold tea. Particles move faster when they gain energy. The same idea applies in cells, where enzymes speed up chemical reactions.

An enzyme binds its reactant, the substrate, at a small region called the active site. The substrate must collide with the active site in the right orientation. Each successful collision can form products.

Raising the temperature increases the kinetic energy (the energy of movement) of the molecules. They move faster and collide more often. A larger share of collisions also has enough energy to react. The rate of reaction therefore rises.

Common mistake

Heat does not make an enzyme work harder. It raises the number of collisions and the share of them that succeed.

Key terms · tap one for its definition

enzymes

Enzymes are biological catalysts that increase reaction rates without being consumed.

substrate

A substrate is the reactant molecule that binds to an enzyme’s active site and is converted into products.

active site

The active site is the region of an enzyme, with a specific shape, where the substrate binds and the reaction is catalysed.

Part 1 done

2

Part 2 of 5: Too much heat changes the enzyme’s shape and stops it working

The rate does not keep rising for ever. A second effect begins as the temperature climbs.

An enzyme’s tertiary structure is its three-dimensional folded shape. Weak bonds, such as hydrogen bonds and ionic bonds, hold it in place. Extra heat makes the atoms vibrate more.

At high temperatures the vibrations break these bonds. The enzyme loses its shape, and the active site changes shape too. The substrate no longer fits. This change is called denaturation.

A denatured enzyme cannot be used again. Cooling does not usually restore its shape. Activity therefore falls and finally stops.

Common mistake

A denatured enzyme has not been killed. Enzymes are molecules, not living things, so they are denatured and never killed.

Key terms · tap one for its definition

tertiary structure

The tertiary structure is the three-dimensional folding of a polypeptide chain, held by bonds between the R groups of its amino acids.

denaturation

Denaturation is a change in an enzyme’s shape, usually irreversible, that destroys its active site and so its activity.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the main reason why the rate of an enzyme-catalysed reaction rises when the temperature increases from 10 °C to 30 °C.
Show answer and explanation

Answer: C · Worked explanation

A rise in temperature gives molecules more kinetic energy. Collisions between substrate molecules and active sites become more frequent, and a larger share of them leads to a reaction. The idea that heat replaces the enzyme is wrong, because the enzyme is still needed to catalyse the reaction. Heat does not enlarge the active site.
3

Part 3 of 5: The optimum temperature gives the highest enzyme activity

The two effects happen together, and their balance shapes a typical graph.

Below a certain temperature, extra collisions outweigh any damage, so the rate rises. Above it, denaturation outweighs the gain. The rate peaks and then falls steeply to zero.

Figure 1. The rate rises with temperature to a single peak and then falls steeply to zero.

The peak marks the optimum temperature. It differs between enzymes, because each enzyme has its own structure and bonds. Many human enzymes work best near 37 °C. Enzymes from bacteria in hot springs work best at much higher temperatures.

Exam tip

When describing a curve, say what the rate does before the peak, at the peak and after it. Give a reason for each.

Key term

optimum temperature

The optimum temperature is the temperature at which an enzyme’s activity is highest under given conditions.

Part 3 done

4

Part 4 of 5: Low temperatures slow enzymes without damaging their shape

Cooling has a different effect from heating.

At low temperatures the molecules have little kinetic energy. Collisions are rare, and few have enough energy to react. The enzyme keeps its shape, so activity returns when the mixture warms again.

Effect of temperature on an enzyme-catalysed reaction

TemperatureCollisionsEnzyme shapeRate
Well below optimumFewIntactLow
At optimumFrequentIntactHighest
Above optimumVery frequentActive site distortedFalling
Well above optimumVery frequentDenaturedNear zero
Temperature
Well below optimum
Collisions
Few
Enzyme shape
Intact
Rate
Low
Temperature
At optimum
Collisions
Frequent
Enzyme shape
Intact
Rate
Highest
Temperature
Above optimum
Collisions
Very frequent
Enzyme shape
Active site distorted
Rate
Falling
Temperature
Well above optimum
Collisions
Very frequent
Enzyme shape
Denatured
Rate
Near zero

Cooling food slows the enzymes in microbes, so the food spoils more slowly. Laboratories store many enzymes in a fridge or freezer for the same reason. Low temperature slows a reaction, whereas high temperature can destroy the enzyme. Cold storage therefore keeps enzymes usable.

Part 4 done

Quick check

One question on the part you just read

Easy

Identify the statement that describes denaturation.
Show answer and explanation

Answer: A · Worked explanation

Denaturation is the loss of an enzyme’s three-dimensional shape, which destroys the active site. Enzymes are not used up when they catalyse a reaction, so describing denaturation as an enzyme being consumed is wrong. Slow molecules in the cold reduce the rate, but they do not change the enzyme’s shape.
5

Part 5 of 5: Rates calculated from experimental data reveal the optimum

Now that the curve makes sense, you can apply it to real measurements.

A common experiment mixes an enzyme with its substrate at several temperatures in water baths. The rate of reaction shows how quickly product forms. Measure the amount of product at fixed times and calculate the rate.

Control these variables so that only temperature changes.

  • pH, held steady with a buffer solution
  • Enzyme concentration
  • Substrate concentration
  • Volumes and reaction time

Worked example

Comparing rates at two temperatures

Catalase breaks down hydrogen peroxide and releases oxygen. At 20 °C, 6.0 cm³ of oxygen collects in 120 s. At 30 °C, 15.0 cm³ collects in 120 s. Calculate the rate at each temperature.
  1. 1
    Word equation: rate of reaction = volume of oxygen divided by time.
  2. 2
    At 20 °C: 6.0 cm3120 s=0.050 cm3 s−1\frac{6.0\,\mathrm{cm^3}}{120\,\mathrm{s}}=0.050\,\mathrm{cm^3\,s^{-1}}120s6.0cm3​=0.050cm3s−1.
  3. 3
    At 30 °C: 15.0 cm3120 s=0.125 cm3 s−1\frac{15.0\,\mathrm{cm^3}}{120\,\mathrm{s}}=0.125\,\mathrm{cm^3\,s^{-1}}120s15.0cm3​=0.125cm3s−1.
  4. 4
    Compare the rates: 0.1250.050=2.5\frac{0.125}{0.050}=2.50.0500.125​=2.5.

Answer: The rates are 0.050 cm3 s−10.050\,\mathrm{cm^3\,s^{-1}}0.050cm3s−1 at 20 °C and 0.125 cm3 s−10.125\,\mathrm{cm^3\,s^{-1}}0.125cm3s−1 at 30 °C. The rate is 2.5 times greater at 30 °C.

Plot rate against temperature and join the points with a smooth curve. The highest point shows the optimum, to within the range tested. A temperature between two tested values might give a higher rate.

Go deeperThe temperature coefficient

Biologists sometimes measure the effect of temperature with the temperature coefficient, Q10Q_{10}Q10​. It is the rate at a temperature divided by the rate at 10 °C lower: Q10=rate at (T+10)rate at TQ_{10}=\frac{\mathrm{rate\ at\ }(T+10)}{\mathrm{rate\ at\ }T}Q10​=rate at Trate at (T+10)​.

The example data give Q10=2.5Q_{10}=2.5Q10​=2.5 between 20 °C and 30 °C. The value is meaningful only below the optimum, because denaturation changes the pattern above it. Many enzyme-catalysed reactions give values of about 2 in that range.

Key term

rate of reaction

The rate of reaction is the change in the amount of product or substrate per unit time, for example in cm3 s−1\mathrm{cm^3\,s^{-1}}cm3s−1.

Note read

Check your recall[14 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Explain[3 marks]

    Explain why the rate of an enzyme-catalysed reaction increases as the temperature rises towards the optimum.

    Show mark schemeHide mark scheme

    Model answer

    Molecules gain kinetic energy and move faster. Substrate molecules therefore collide with active sites more often. A larger proportion of the collisions has enough energy to result in a reaction.

    • 1 mark for stating that molecules have more kinetic energy and move faster
    • 1 mark for stating that substrate molecules collide with active sites more often
    • 1 mark for stating that a larger proportion of collisions has enough energy to react
  2. 2.Explain[3 marks]

    Explain why the rate of reaction falls to zero at a very high temperature.

    Show mark schemeHide mark scheme

    Model answer

    Heat makes the atoms vibrate and breaks the weak bonds holding the tertiary structure. The active site changes shape. The substrate can no longer bind, so the enzyme is denatured and activity stops.

    • 1 mark for stating that vibrations break the weak bonds that hold the tertiary structure
    • 1 mark for stating that the shape of the active site changes
    • 1 mark for stating that the substrate can no longer bind because the enzyme is denatured
  3. 3.State[1 mark]

    State what is meant by the optimum temperature of an enzyme.

    Show mark schemeHide mark scheme

    Model answer

    The optimum temperature is the temperature at which the enzyme’s activity is highest under given conditions.

    • 1 mark for stating that it is the temperature at which the enzyme’s activity (or rate of reaction) is highest
  4. 4.Calculate[2 marks]

    Calculate the rate of reaction when an enzyme releases 9.0 cm³ of oxygen in 150 s. Give the unit.

    Show mark schemeHide mark scheme

    Model answer

    Rate = 9.0 cm3150 s=0.060 cm3 s−1\frac{9.0\,\mathrm{cm^3}}{150\,\mathrm{s}}=0.060\,\mathrm{cm^3\,s^{-1}}150s9.0cm3​=0.060cm3s−1.

    • 1 mark for dividing 9.0 cm³ by 150 s
    • 1 mark for giving the answer as 0.060 cm3 s−10.060\,\mathrm{cm^3\,s^{-1}}0.060cm3s−1
  5. 5.Compare[3 marks]

    Compare the effects of a very low temperature and a very high temperature on an enzyme.

    Show mark schemeHide mark scheme

    Model answer

    Both reduce the rate of reaction. At a very low temperature the molecules have little kinetic energy, but the enzyme keeps its shape and recovers on warming. At a very high temperature the enzyme is denatured, which is usually permanent.

    • 1 mark for stating that both temperatures reduce the rate of reaction
    • 1 mark for explaining that a low temperature slows collisions but the enzyme keeps its shape and recovers on warming
    • 1 mark for explaining that a high temperature denatures the enzyme, which is usually irreversible
  6. 6.Suggest[2 marks]

    Suggest why an enzyme from bacteria living in a hot spring can have a higher optimum temperature than a human enzyme.

    Show mark schemeHide mark scheme

    Model answer

    Different enzymes have different structures and bonds. The hot-spring enzyme keeps its shape, and so its active site, at temperatures that would denature the human enzyme.

    • 1 mark for stating that the enzymes have different structures or bonds
    • 1 mark for stating that the hot-spring enzyme keeps its shape and active site at higher temperatures

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·State[1 mark]

State the temperature near which many human enzymes have their highest activity.
Show answer and explanation

Answer: B · Worked explanation

Human body temperature is about 37 °C, and many human enzymes work best near it. A temperature of 10 °C is too cool, so collisions would be infrequent. At 55 °C and above, many human enzymes would be denatured, so the rate would fall rather than reach its highest value.
4.

Medium·Calculate[2 marks]

Calculate the rate of reaction when an enzyme releases 12.0 cm³ of gas in 80 s.
Show answer and explanation

Answer: D · Worked explanation

Rate = volume divided by time, so 12.0 cm380 s=0.150 cm3 s−1\frac{12.0\,\mathrm{cm^3}}{80\,\mathrm{s}}=0.150\,\mathrm{cm^3\,s^{-1}}80s12.0cm3​=0.150cm3s−1. The value 6.67 comes from dividing the time by the volume, which gives seconds per cm³ instead of a rate. The value 960 comes from multiplying the two numbers. The unit follows from cm³ divided by s.
5.

Medium·Identify[2 marks]

Rates (arbitrary units) were 0.8 at 10 °C, 1.6 at 20 °C, 3.1 at 30 °C, 4.5 at 40 °C, 1.2 at 50 °C and 0.0 at 60 °C. Identify the conclusion that is best supported.
Show answer and explanation

Answer: B · Worked explanation

Only certain temperatures were tested, so the true peak could lie between 30 °C and 50 °C. Saying it is exactly 40 °C goes beyond the data. The rate at 50 °C is 1.2, not zero, so the enzyme is not fully denatured there. The rate clearly rises between 10 °C and 30 °C.
6.

Medium·Predict[2 marks]

An enzyme solution is heated to 80 °C until no activity remains, then cooled to 37 °C. Predict its activity at 37 °C.
Show answer and explanation

Answer: A · Worked explanation

Denaturation is usually irreversible, so cooling does not restore the active site and activity stays very low. The belief that cooling restores full activity confuses denaturation with the temporary slowing seen at low temperatures. Molecules gaining energy does not help, because the active site no longer fits the substrate.
7.

Medium·Predict[2 marks]

Enzyme X has an optimum of 37 °C and enzyme Y has an optimum of 75 °C. Both are tested at 60 °C. Predict the outcome.
Show answer and explanation

Answer: C · Worked explanation

Each enzyme has its own structure and its own optimum. At 60 °C enzyme X is well above its optimum and likely to be denatured, whereas enzyme Y is still below its optimum and works well. A lower optimum does not make an enzyme faster at higher temperatures. Using 37 °C as a limit for enzyme Y is wrong, because its optimum is 75 °C.
8.

Hard·Calculate[2 marks]

At 20 °C an enzyme makes product at 0.050 cm3 s−10.050\,\mathrm{cm^3\,s^{-1}}0.050cm3s−1. At 30 °C the rate is 2.5 times greater. Calculate the time needed to make 15.0 cm³ of product at 30 °C.
Show answer and explanation

Answer: B · Worked explanation

The rate at 30 °C is 0.050×2.5=0.125 cm3 s−10.050\times2.5=0.125\,\mathrm{cm^3\,s^{-1}}0.050×2.5=0.125cm3s−1. Time = volume divided by rate, so 15.00.125=120 s\frac{15.0}{0.125}=120\,\mathrm{s}0.12515.0​=120s. The value 300 s uses the 20 °C rate instead of the 30 °C rate. The value 37.5 s comes from multiplying 15.0 by 2.5. The value 750 s comes from using the 20 °C rate and then multiplying the time by 2.5 instead of dividing it.
9.

Hard·Evaluate[2 marks]

A student writes that above the optimum, the rate falls because collisions between enzyme and substrate become less frequent. Evaluate this statement.
Show answer and explanation

Answer: D · Worked explanation

Heating increases kinetic energy, so collisions remain frequent. The rate falls because denaturation changes the active site and the substrate can no longer bind. The idea that molecules slow down in the heat is the reverse of the truth. Enzymes are not used up by catalysis, and it is the enzyme that is denatured in this context.
10.

Hard·Identify[2 marks]

Identify the procedure that gives a valid test of the effect of temperature on an enzyme.
Show answer and explanation

Answer: A · Worked explanation

A valid test changes one variable, temperature, and keeps pH, enzyme concentration, substrate concentration and volumes constant. Using more enzyme at higher temperatures changes a second variable. Changing pH also adds a second variable. Timing for longer at lower temperatures hides the difference in rate that the investigation is meant to measure.

Keep going

Next topic5.17 Evolution through natural selectionPrevious topic5.15 Effects of climate change on organisms

More in Topic 5 · On the Wild Side

  1. 5.12Evidence for climate changeNotes · 10 questions
  2. 5.13Causes of climate changeNotes · 10 questions
  3. 5.14Climate models and predictionsNotes · 10 questions
  4. 5.15Effects of climate change on organismsNotes · 10 questions
  5. 5.16Temperature and enzyme activityNotes · 10 questions
  6. 5.17Evolution through natural selectionNotes · 10 questions
  7. 5.18How the scientific community validates evidenceNotes · 10 questions
  8. 5.19Speciation and reproductive isolationNotes · 10 questions
  9. 5.20Controversial science and decision makingNotes · 9 questions

All Edexcel A-level Biology A (Salters-Nuffield) topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by Pearson Edexcel or any exam board.

On this page

0/5 read

  1. 1Warmer conditions make enzyme reactions faster at first
  2. 2Too much heat changes the enzyme’s shape and stops it working
  3. 3The optimum temperature gives the highest enzyme activity
  4. 4Low temperatures slow enzymes without damaging their shape
  5. 5Rates calculated from experimental data reveal the optimum
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe

Enzyme activity at different temperatures

Rate of reaction (arbitrary units)010203040506001234Temperature (°C)
  • Rate below the peak
  • Rate above the peak
  • Peak