Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›IB Chemistry
  3. ›R1 What drives chemical reactions?
  4. ›R1.1 Measuring enthalpy changes

IB Chemistry · R1 · What drives chemical reactions?

R1.1 Measuring enthalpy changes

Explain enthalpy change, measure it by calorimetry, calculate it from data and assess errors.

  • 4 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Enthalpy change describes heat transferred during a reaction
  1. 1Enthalpy change describes heat transferred during a reaction
  2. 2Calorimetry measures temperature changes in the surroundings
  3. 3Temperature data give the enthalpy change per mole
  4. 4Heat exchange and measurement limits affect calculated values
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Enthalpy change describes heat transferred during a reaction

The enthalpy change of a reaction is the heat transferred at constant pressure. It compares the enthalpy of the products with that of the reactants. An exothermic reaction transfers heat to its surroundings. Its enthalpy change is negative because the products have lower enthalpy. An endothermic reaction takes in heat from its surroundings. Its enthalpy change is positive because the products have higher enthalpy.

A reaction enthalpy change usually has units of kJ mol−1\mathrm{kJ\,mol^{-1}}kJmol−1. Here, one mole means one mole of reaction as written in the chemical equation. Changing the amounts in that equation changes the stated enthalpy change. Calorimetry estimates the heat transfer by measuring a temperature change in the surroundings.

Key terms · tap one for its definition

enthalpy change

The heat transferred by a reaction at constant pressure, equal to product enthalpy minus reactant enthalpy.

exothermic reaction

A reaction that transfers heat to its surroundings and has a negative enthalpy change.

endothermic reaction

A reaction that takes in heat from its surroundings and has a positive enthalpy change.

Part 1 done

2

Part 2 of 4: Calorimetry measures temperature changes in the surroundings

A calorimeter holds the reaction while its surroundings change temperature. For two aqueous solutions, an insulated cup reduces heat exchange with the room. Measure the reactants, record their initial temperatures, then mix them. Stir gently and record the highest or lowest temperature reached. If the initial temperatures differ, their simple average may not represent the mixture's starting temperature.

Use the temperature change between the starting temperature and the measured maximum or minimum. A lid reduces heat transfer and evaporation. A thermometer or temperature probe measures the solution, not the reacting particles directly. A temperature rise means the solution gained heat. A temperature fall means it lost heat. The reaction's heat transfer has the opposite sign.

Figure 1. The probe measures the solution temperature. The lid and insulation reduce heat exchange with the room.

Common mistake

A rising solution temperature does not mean a positive reaction enthalpy change. The solution gains heat as an exothermic reaction releases it.

Key terms · tap one for its definition

calorimeter

An apparatus used to estimate heat transfer from a measured temperature change.

temperature change

The final measured temperature minus the starting temperature of the substance being monitored.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the meaning of the enthalpy change for a reaction carried out at constant pressure.
Show answer and explanation

Answer: B · Worked explanation

At constant pressure, the enthalpy change describes the heat transferred by a reaction. The temperature change of the mixture can be used to estimate this transfer, but it is not itself the enthalpy change.
3

Part 3 of 4: Temperature data give the enthalpy change per mole

Calculate the heat gained or lost by the solution using q=mcΔTq=mc\Delta Tq=mcΔT. Here, mmm is solution mass, ccc is its specific heat capacity, and ΔT\Delta TΔT is final temperature minus initial temperature. For dilute aqueous solutions, ccc is often approximated as 4.18 J g−1 K−14.18\,\mathrm{J\,g^{-1}\,K^{-1}}4.18Jg−1K−1. Their density is often approximated as 1.00 g cm−31.00\,\mathrm{g\,cm^{-3}}1.00gcm−3 when converting volume to mass.

Assuming negligible heat exchange elsewhere, reaction heat is −q-q−q for the solution. Divide by the amount that reacts in the balanced equation. Convert joules to kilojoules before reporting ΔH\Delta HΔH in kJ mol−1\mathrm{kJ\,mol^{-1}}kJmol−1.

Worked example

Enthalpy change from a temperature rise

Mix 50.0 cm³ of 1.00 mol dm⁻³ acid with 50.0 cm³ of 1.00 mol dm⁻³ alkali. They react in a 1:1 ratio. Temperature rises by 6.8 °C. Assume the stated density and specific heat capacity.
  1. 1
    Total solution mass: m=100.0 cm3×1.00 g cm−3=100.0 gm=100.0\,\mathrm{cm^3}\times1.00\,\mathrm{g\,cm^{-3}}=100.0\,\mathrm{g}m=100.0cm3×1.00gcm−3=100.0g.
  2. 2
    Heat gained by solution: q=100.0×4.18×6.8=2842.4 J=2.8424 kJq=100.0\times4.18\times6.8=2842.4\,\mathrm{J}=2.8424\,\mathrm{kJ}q=100.0×4.18×6.8=2842.4J=2.8424kJ.
  3. 3
    Amount reacting: n=1.00 mol dm−3×0.0500 dm3=0.0500 moln=1.00\,\mathrm{mol\,dm^{-3}}\times0.0500\,\mathrm{dm^3}=0.0500\,\mathrm{mol}n=1.00moldm−3×0.0500dm3=0.0500mol.
  4. 4
    Reaction enthalpy change: ΔH=−2.84240.0500=−56.848 kJ mol−1\Delta H=\frac{-2.8424}{0.0500}=-56.848\,\mathrm{kJ\,mol^{-1}}ΔH=0.0500−2.8424​=−56.848kJmol−1.

Answer: ΔH≈−57 kJ mol−1\Delta H\approx-57\,\mathrm{kJ\,mol^{-1}}ΔH≈−57kJmol−1 for the reaction as written.

Exam tip

State which substance determines the amount reacting. Keep the sign change between solution heat and reaction heat clear.

Key terms · tap one for its definition

specific heat capacity

The energy needed to raise the temperature of one gram of a substance by one kelvin.

reaction heat

Heat transferred by the reaction; it is opposite in sign to heat gained or lost by the solution when other transfers are negligible.

Part 3 done

4

Part 4 of 4: Heat exchange and measurement limits affect calculated values

An insulated cup reduces heat exchange but does not prevent it. In an exothermic experiment, heat escaping to the room lowers the measured temperature rise. The calculated enthalpy change then appears less negative than its true value. The cup and thermometer can absorb heat too. Ignoring their heat capacity has a similar effect.

A temperature probe may miss the true maximum or minimum if readings are too slow. Incomplete mixing can leave different parts of the solution at different temperatures. Evaporation and inaccurate volume measurements introduce further uncertainty. The usual values for density and specific heat capacity are approximations, not properties shared by every solution. Stirring, a lid and prompt readings improve the measurement, but do not remove every error.

Exam tip

When discussing an error, link its cause to the measured temperature change and then to the calculated enthalpy change.

Note read

Check your recall[15 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Define[2 marks]

    Define enthalpy change for a reaction at constant pressure.

    Show mark schemeHide mark scheme

    Model answer

    It is the heat transferred at constant pressure, equal to the enthalpy of the products minus that of the reactants.

    • 1 mark for identifying heat transferred at constant pressure
    • 1 mark for stating that product enthalpy minus reactant enthalpy gives the change
  2. 2.Explain[3 marks]

    Explain why a temperature rise in the solution gives a negative reaction enthalpy change.

    Show mark schemeHide mark scheme

    Model answer

    The solution gains heat, so the reaction transfers heat to its surroundings. The reaction is exothermic and has a negative enthalpy change.

    • 1 mark for stating that the solution gains heat
    • 1 mark for stating that the reaction transfers heat to the surroundings
    • 1 mark for linking an exothermic reaction to a negative enthalpy change
  3. 3.Describe[3 marks]

    Describe how to measure a temperature change when mixing two aqueous reactants.

    Show mark schemeHide mark scheme

    Model answer

    Measure the reactants and record their initial temperatures. Mix them in an insulated, lidded cup and stir. Record the highest or lowest temperature, then compare it with the starting temperature.

    • 1 mark for measuring the reactants and recording their initial temperatures
    • 1 mark for mixing and stirring them in an insulated cup
    • 1 mark for recording the temperature extreme and comparing it with the starting temperature
  4. 4.Calculate[4 marks]

    Calculate the reaction enthalpy change when 80.0 g of solution warms by 5.0 °C and 0.0400 mol reacts. Use c=4.18 J g−1 K−1c=4.18\,\mathrm{J\,g^{-1}\,K^{-1}}c=4.18Jg−1K−1 and assume negligible heat exchange elsewhere.

    Show mark schemeHide mark scheme

    Model answer

    q=mcΔT=80.0×4.18×5.0=1672 J=1.672 kJq=mc\Delta T=80.0\times4.18\times5.0=1672\,\mathrm{J}=1.672\,\mathrm{kJ}q=mcΔT=80.0×4.18×5.0=1672J=1.672kJ. The reaction releases this heat, so ΔH=−1.672/0.0400=−41.8 kJ mol−1\Delta H=-1.672/0.0400=-41.8\,\mathrm{kJ\,mol^{-1}}ΔH=−1.672/0.0400=−41.8kJmol−1.

    • 1 mark for using q=mcΔTq=mc\Delta Tq=mcΔT with the given values
    • 1 mark for obtaining 1672 J1672\,\mathrm{J}1672J or 1.672 kJ1.672\,\mathrm{kJ}1.672kJ for the solution
    • 1 mark for dividing the reaction heat by 0.0400 mol0.0400\,\mathrm{mol}0.0400mol
    • 1 mark for giving −41.8 kJ mol−1-41.8\,\mathrm{kJ\,mol^{-1}}−41.8kJmol−1 with the correct sign and units
  5. 5.Explain[3 marks]

    Explain how heat escaping from an insulated cup affects an exothermic enthalpy result.

    Show mark schemeHide mark scheme

    Model answer

    Some released heat reaches the room instead of warming the solution. The measured temperature rise is smaller, so the calculated enthalpy change is less negative.

    • 1 mark for identifying heat transfer from the cup to the room
    • 1 mark for stating that the measured temperature rise becomes smaller
    • 1 mark for concluding that the calculated enthalpy change is less negative

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·State[1 mark]

State the sign of the enthalpy change for an endothermic reaction.
Show answer and explanation

Answer: D · Worked explanation

An endothermic reaction takes in heat, and its products have higher enthalpy than its reactants, so its enthalpy change is positive. A negative value instead describes a reaction that transfers heat to its surroundings.
3.

Easy·Identify[1 mark]

Identify the main purpose of using an insulated cup in a solution calorimetry experiment.
Show answer and explanation

Answer: A · Worked explanation

Insulation reduces heat exchange between the solution and the room, so the measured temperature change better reflects the reaction's heat transfer. It cannot eliminate heat exchange or make the solution's properties identical to those of water.
4.

Easy·Identify[1 mark]

Identify a practical step that helps reduce heat loss and evaporation during a calorimetry measurement.
Show answer and explanation

Answer: A · Worked explanation

A lid reduces heat transfer to the room and limits evaporation, helping the temperature measurement better represent the heat transfer. Leaving the solution unstirred can instead produce uneven temperatures, while waiting until it cools loses the useful temperature extreme.
5.

Medium·Calculate[2 marks]

In an experiment, 75.0 g of solution cools by 4.0 K as 0.0250 mol reacts. Using c=4.18 J g−1 K−1c=4.18\,\mathrm{J\,g^{-1}\,K^{-1}}c=4.18Jg−1K−1 and assuming negligible heat exchange elsewhere, calculate the reaction enthalpy change.
Show answer and explanation

Answer: D · Worked explanation

The solution loses q=75.0×4.18×(−4.0)=−1254 Jq=75.0\times4.18\times(-4.0)=-1254\,\mathrm{J}q=75.0×4.18×(−4.0)=−1254J, so the reaction gains +1.254 kJ+1.254\,\mathrm{kJ}+1.254kJ. Dividing by 0.0250 mol0.0250\,\mathrm{mol}0.0250mol gives +50.2 kJ mol−1+50.2\,\mathrm{kJ\,mol^{-1}}+50.2kJmol−1. The tempting negative value reverses the sign incorrectly: a cooling solution indicates an endothermic reaction.
6.

Medium·Determine[2 marks]

Two aqueous reactants have initial temperatures of 19.0 °C and 27.0 °C. They are mixed in an insulated cup, and the mixture reaches a maximum of 25.0 °C. Which approach determines the solution's temperature change most appropriately?
Show answer and explanation

Answer: B · Worked explanation

The temperature change must compare the measured maximum with the mixture's actual starting temperature; when the reactants begin at different temperatures, their simple average may not represent that starting temperature. Using the hotter reactant alone would treat its temperature as the starting point and ignore the other solution's contribution.
7.

Medium·Calculate[2 marks]

A reaction warms 120.0 g of solution by 3.5 K. If c=4.18 J g−1 K−1c=4.18\,\mathrm{J\,g^{-1}\,K^{-1}}c=4.18Jg−1K−1 and 0.0600 mol reacts, calculate the reaction enthalpy change, assuming negligible heat exchange elsewhere.
Show answer and explanation

Answer: C · Worked explanation

The solution gains q=120.0×4.18×3.5=1755.6 J=1.7556 kJq=120.0\times4.18\times3.5=1755.6\,\mathrm{J}=1.7556\,\mathrm{kJ}q=120.0×4.18×3.5=1755.6J=1.7556kJ, so the reaction transfers −1.7556 kJ-1.7556\,\mathrm{kJ}−1.7556kJ. Dividing by 0.0600 mol0.0600\,\mathrm{mol}0.0600mol gives −29.3 kJ mol−1-29.3\,\mathrm{kJ\,mol^{-1}}−29.3kJmol−1. The positive value wrongly assigns the solution's heat gain to the reaction.
8.

Medium·Deduce[2 marks]

An exothermic experiment is repeated with the same reactant amounts, but the cup and thermometer absorb some of the released heat. If their heat capacity is ignored, what is the likely effect on the calculated enthalpy change?
Show answer and explanation

Answer: A · Worked explanation

Some released heat warms the cup and thermometer rather than the solution, so the measured solution temperature rise is smaller than it would otherwise be. The calculated heat transfer is therefore too small in magnitude, making the exothermic enthalpy change appear less negative; using the same reactant amount does not remove this error.
9.

Medium·Calculate[2 marks]

A 40.0 cm³ portion of an aqueous solution reacts and causes a 50.0 g total solution mass to warm by 6.0 K. The reacting amount is 0.0200 mol. Using c=4.18 J g−1 K−1c=4.18\,\mathrm{J\,g^{-1}\,K^{-1}}c=4.18Jg−1K−1, calculate the reaction enthalpy change, assuming negligible heat exchange elsewhere.
Show answer and explanation

Answer: A · Worked explanation

The solution gains q=50.0×4.18×6.0=1254 J=1.254 kJq=50.0\times4.18\times6.0=1254\,\mathrm{J}=1.254\,\mathrm{kJ}q=50.0×4.18×6.0=1254J=1.254kJ. The reaction heat is −1.254 kJ-1.254\,\mathrm{kJ}−1.254kJ, and dividing by 0.0200 mol0.0200\,\mathrm{mol}0.0200mol gives −62.7 kJ mol−1-62.7\,\mathrm{kJ\,mol^{-1}}−62.7kJmol−1. The positive result confuses heat gained by the solution with heat transferred by the reaction.
10.

Hard·Determine[2 marks]

For the reaction A+B→products\mathrm{A+B\rightarrow products}A+B→products, 40.0 cm³ of 0.500 mol dm⁻³ A is mixed with 60.0 cm³ of 0.400 mol dm⁻³ B. The total solution warms by 5.0 K. Assume a density of 1.00 g cm−31.00\,\mathrm{g\,cm^{-3}}1.00gcm−3, c=4.18 J g−1 K−1c=4.18\,\mathrm{J\,g^{-1}\,K^{-1}}c=4.18Jg−1K−1, and negligible heat exchange elsewhere. Determine the enthalpy change per mole of reaction as written.
Show answer and explanation

Answer: D · Worked explanation

The solution mass is 100.0 g100.0\,\mathrm{g}100.0g, so it gains q=100.0×4.18×5.0=2090 Jq=100.0\times4.18\times5.0=2090\,\mathrm{J}q=100.0×4.18×5.0=2090J. The amounts are n(A)=0.0200 moln(\mathrm{A})=0.0200\,\mathrm{mol}n(A)=0.0200mol and n(B)=0.0240 moln(\mathrm{B})=0.0240\,\mathrm{mol}n(B)=0.0240mol; A limits the 1:1 reaction. Thus ΔH=−2.090 kJ/0.0200 mol=−104.5 kJ mol−1\Delta H=-2.090\,\mathrm{kJ}/0.0200\,\mathrm{mol}=-104.5\,\mathrm{kJ\,mol^{-1}}ΔH=−2.090kJ/0.0200mol=−104.5kJmol−1.

Keep going

Next topicR1.2 Energy cycles in reactionsPrevious topicS3.2 Functional groups

More in R1 · What drives chemical reactions?

  1. R1.1Measuring enthalpy changesNotes · 10 questions
  2. R1.2Energy cycles in reactionsNotes · 10 questions
  3. R1.3Energy from fuelsNotes · 10 questions
  4. R1.4Entropy and spontaneityNotes · 10 questions· HL only

All IB Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by IB Diploma Programme or any exam board.

On this page

0/4 read

  1. 1Enthalpy change describes heat transferred during a reaction
  2. 2Calorimetry measures temperature changes in the surroundings
  3. 3Temperature data give the enthalpy change per mole
  4. 4Heat exchange and measurement limits affect calculated values
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe