Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›IB Chemistry
  3. ›R1 What drives chemical reactions?
  4. ›R1.3 Energy from fuels

IB Chemistry · R1 · What drives chemical reactions?

R1.3 Energy from fuels

Explain combustion, compare fuels by energy content, calculate energy released, and discuss environmental impacts.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Combustion releases energy as fuels react with oxygen
  1. 1Combustion releases energy as fuels react with oxygen
  2. 2Energy per kilogram allows useful fuel comparisons
  3. 3Burned fuel mass determines the energy released
  4. 4Fuel choice affects emissions and resource use
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Combustion releases energy as fuels react with oxygen

A fuel stores chemical energy and releases energy when it reacts. In combustion, a fuel reacts with oxygen and transfers energy to its surroundings. The reaction releases more energy as new bonds form than it takes to break bonds in the reactants. This makes combustion exothermic.

Complete combustion of a fuel containing carbon and hydrogen produces carbon dioxide and water. For methane, the equation is CH4+2O2→CO2+2H2O\mathrm{CH_4+2O_2\rightarrow CO_2+2H_2O}CH4​+2O2​→CO2​+2H2​O. Hydrogen contains no carbon, so its complete combustion produces water but no carbon dioxide. A spark may be needed to start either reaction, even though it releases energy overall.

Common mistake

A reaction needing a spark is not necessarily endothermic. The spark starts combustion; the ongoing reaction releases energy.

Key terms · tap one for its definition

fuel

A fuel is a substance that releases useful energy when it reacts.

combustion

Combustion is an exothermic reaction between a fuel and oxygen.

complete combustion

Complete combustion occurs with sufficient oxygen and produces fully oxidised products.

Part 1 done

2

Part 2 of 4: Energy per kilogram allows useful fuel comparisons

Specific energy is the energy released per unit mass of fuel burned. It allows fuels to be compared using the same mass. The approximate values below assume that water formed during combustion remains vapour. Actual values can vary with fuel composition, especially for petrol.

Approximate energy released during complete combustion

FuelSpecific energy
Hydrogen120 MJ kg−1120\ \mathrm{MJ\,kg^{-1}}120 MJkg−1
Methane50 MJ kg−150\ \mathrm{MJ\,kg^{-1}}50 MJkg−1
Petrol43 MJ kg−143\ \mathrm{MJ\,kg^{-1}}43 MJkg−1
Ethanol27 MJ kg−127\ \mathrm{MJ\,kg^{-1}}27 MJkg−1
Fuel
Hydrogen
Specific energy
120 MJ kg−1120\ \mathrm{MJ\,kg^{-1}}120 MJkg−1
Fuel
Methane
Specific energy
50 MJ kg−150\ \mathrm{MJ\,kg^{-1}}50 MJkg−1
Fuel
Petrol
Specific energy
43 MJ kg−143\ \mathrm{MJ\,kg^{-1}}43 MJkg−1
Fuel
Ethanol
Specific energy
27 MJ kg−127\ \mathrm{MJ\,kg^{-1}}27 MJkg−1

Hydrogen releases more energy per kilogram than the other fuels shown. That does not mean a storage tank holds more usable energy. Hydrogen gas has a low density, so storage volume and conditions also matter. Specific energy alone cannot show how easily a fuel can be stored, transported or used.

Exam tip

When comparing data, name the basis of comparison. Energy per kilogram differs from energy per litre.

Key term

specific energy

Specific energy is the energy released per unit mass of fuel burned.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the best description of the energy change when a fuel undergoes combustion in oxygen.
Show answer and explanation

Answer: D · Worked explanation

Combustion is exothermic: although energy is needed to break bonds in the fuel and oxygen, forming bonds in the products releases more energy. The difference is transferred to the surroundings. The need for a spark does not make combustion endothermic; a spark can initiate a reaction that releases energy overall.
3

Part 3 of 4: Burned fuel mass determines the energy released

To calculate energy released, multiply fuel mass by its specific energy: E=m×eE=m\times eE=m×e. Here, EEE is energy, mmm is the mass burned, and eee is specific energy. Use matching mass units. For example, kilograms combine with MJ kg−1\mathrm{MJ\,kg^{-1}}MJkg−1 to give megajoules. This calculates the energy released by combustion, not the energy a device necessarily delivers. Some released energy transfers to surroundings without being used.

Worked example

Energy from burning ethanol

Calculate the energy released by burning 0.20 kg of ethanol. Use a specific energy of 27 MJ kg−127\ \mathrm{MJ\,kg^{-1}}27 MJkg−1.
  1. 1
    Write E=m×eE=m\times eE=m×e.
  2. 2
    Substitute: E=0.20 kg×27 MJ kg−1E=0.20\ \mathrm{kg}\times27\ \mathrm{MJ\,kg^{-1}}E=0.20 kg×27 MJkg−1.
  3. 3
    Calculate: E=5.4 MJE=5.4\ \mathrm{MJ}E=5.4 MJ.

Answer: Burning 0.20 kg of ethanol releases approximately 5.4 MJ5.4\ \mathrm{MJ}5.4 MJ.

Exam tip

Keep the units in the calculation. They show that the kilograms cancel.

Part 3 done

4

Part 4 of 4: Fuel choice affects emissions and resource use

Burning carbon-containing fuels releases carbon dioxide, a greenhouse gas. Petrol and fossil-derived methane transfer carbon from underground stores to the atmosphere when burned. A methane leak adds another greenhouse gas to the atmosphere. With insufficient oxygen, incomplete combustion can produce toxic carbon monoxide and soot instead of only carbon dioxide and water.

Hydrogen produces no carbon dioxide at the point of use, but its production may cause emissions. Burning it in air can also produce nitrogen oxides. Ethanol can be made from recently grown plants, but growing crops uses land and resources. Its overall impact depends on how it is produced. Compare a fuel’s production, storage and use, rather than judging it by exhaust gases alone.

Common mistake

Hydrogen is not automatically a zero-emission fuel. Its production method matters.

Key terms · tap one for its definition

carbon dioxide

Carbon dioxide is a greenhouse gas produced by complete combustion of carbon-containing fuels.

incomplete combustion

Incomplete combustion occurs when oxygen is insufficient to oxidise a fuel fully.

Note read

Check your recall[14 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[1 mark]

    State the product of complete hydrogen combustion.

    Show mark schemeHide mark scheme

    Model answer

    Complete hydrogen combustion produces water.

    • 1 mark for stating that water is produced
  2. 2.Explain[3 marks]

    Explain why methane combustion releases energy, even though a spark may be needed.

    Show mark schemeHide mark scheme

    Model answer

    A spark starts the reaction. Breaking bonds takes energy, but forming new bonds releases more energy. The overall reaction therefore releases energy to the surroundings.

    • 1 mark for stating that a spark starts the reaction
    • 1 mark for stating that breaking bonds takes energy
    • 1 mark for explaining that new bond formation releases more energy than bond breaking takes
  3. 3.Compare[3 marks]

    Compare hydrogen and ethanol using their specific energies, and give one limitation of this comparison.

    Show mark schemeHide mark scheme

    Model answer

    Hydrogen releases about 120 MJ kg−1120\ \mathrm{MJ\,kg^{-1}}120 MJkg−1, compared with about 27 MJ kg−127\ \mathrm{MJ\,kg^{-1}}27 MJkg−1 for ethanol. Hydrogen therefore releases more energy per kilogram. This does not compare the energy held in equal storage volumes.

    • 1 mark for giving hydrogen’s approximate specific energy as 120 MJ kg−1120\ \mathrm{MJ\,kg^{-1}}120 MJkg−1
    • 1 mark for giving ethanol’s approximate specific energy as 27 MJ kg−127\ \mathrm{MJ\,kg^{-1}}27 MJkg−1 and identifying hydrogen as higher
    • 1 mark for stating that a mass-based comparison does not account for storage volume
  4. 4.Calculate[3 marks]

    Calculate the energy released by burning 0.40 kg of methane. Use 50 MJ kg−150\ \mathrm{MJ\,kg^{-1}}50 MJkg−1.

    Show mark schemeHide mark scheme

    Model answer

    E=m×e=0.40 kg×50 MJ kg−1=20 MJE=m\times e=0.40\ \mathrm{kg}\times50\ \mathrm{MJ\,kg^{-1}}=20\ \mathrm{MJ}E=m×e=0.40 kg×50 MJkg−1=20 MJ.

    • 1 mark for using energy released equals mass multiplied by specific energy
    • 1 mark for substituting 0.40 and 50 correctly
    • 1 mark for calculating 20 MJ20\ \mathrm{MJ}20 MJ
  5. 5.Discuss[4 marks]

    Discuss environmental impacts of using petrol, hydrogen and ethanol as fuels.

    Show mark schemeHide mark scheme

    Model answer

    Petrol combustion releases carbon dioxide, and incomplete combustion can produce carbon monoxide or soot. Hydrogen produces no carbon dioxide when burned, but its production may cause emissions. Ethanol can be produced from plants, although growing them uses land and resources. Each fuel must be assessed beyond its exhaust gases.

    • 1 mark for identifying carbon dioxide emissions from petrol combustion
    • 1 mark for identifying carbon monoxide or soot from incomplete combustion
    • 1 mark for explaining that hydrogen production may cause emissions despite carbon dioxide-free combustion
    • 1 mark for explaining that ethanol production can use land or other resources

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·State[1 mark]

State the products of the complete combustion of methane.
Show answer and explanation

Answer: B · Worked explanation

With sufficient oxygen, methane undergoes complete combustion to form carbon dioxide and water: CH4+2O2→CO2+2H2O\mathrm{CH_4+2O_2\rightarrow CO_2+2H_2O}CH4​+2O2​→CO2​+2H2​O. Carbon monoxide is associated with incomplete combustion, not the stated complete combustion. Hydrogen is not produced as a product in this reaction.
3.

Easy·Identify[1 mark]

Identify what the specific energy of a fuel measures.
Show answer and explanation

Answer: A · Worked explanation

Specific energy is the energy released per unit mass of fuel burned, commonly expressed in MJ kg−1\mathrm{MJ\,kg^{-1}}MJkg−1. Energy per volume is a different basis of comparison. The amount needed to start combustion is not what specific energy describes.
4.

Easy·Identify[1 mark]

Identify a gas that can be produced when a carbon-containing fuel burns with insufficient oxygen and that is toxic.
Show answer and explanation

Answer: B · Worked explanation

Insufficient oxygen can lead to incomplete combustion, which may produce toxic carbon monoxide instead of only the products of complete combustion. Carbon dioxide is a product of complete combustion of carbon-containing fuels, but it is not the toxic gas asked for here. Water vapour is also a possible combustion product, while oxygen is a reactant.
5.

Medium·Compare[2 marks]

Compare the energy released per kilogram by methane and petrol. Use 50 MJ kg−150\ \mathrm{MJ\,kg^{-1}}50 MJkg−1 for methane and 43 MJ kg−143\ \mathrm{MJ\,kg^{-1}}43 MJkg−1 for petrol.
Show answer and explanation

Answer: C · Worked explanation

Subtract the petrol value from the methane value: 50−43=7 MJ kg−150-43=7\ \mathrm{MJ\,kg^{-1}}50−43=7 MJkg−1. Thus methane releases about 7 MJ kg−17\ \mathrm{MJ\,kg^{-1}}7 MJkg−1 more energy for the same mass burned. The value 1.2 is approximately the ratio of the two specific energies, not their difference.
6.

Medium·Calculate[2 marks]

Calculate the energy released by burning 0.15 kg0.15\ \mathrm{kg}0.15 kg of methane. Its specific energy is 50 MJ kg−150\ \mathrm{MJ\,kg^{-1}}50 MJkg−1.
Show answer and explanation

Answer: D · Worked explanation

Use E=m×eE=m\times eE=m×e: E=0.15 kg×50 MJ kg−1=7.5 MJE=0.15\ \mathrm{kg}\times50\ \mathrm{MJ\,kg^{-1}}=7.5\ \mathrm{MJ}E=0.15 kg×50 MJkg−1=7.5 MJ. The kilogram units cancel, leaving megajoules. Dividing the specific energy by the mass would give an incorrect operation and does not calculate the energy released by the sample.
7.

Medium·Calculate[2 marks]

A burner completely burns 80 g80\ \mathrm{g}80 g of petrol. Using a specific energy of 43 MJ kg−143\ \mathrm{MJ\,kg^{-1}}43 MJkg−1, calculate the energy released.
Show answer and explanation

Answer: B · Worked explanation

First convert the mass to kilograms: 80 g=0.080 kg80\ \mathrm{g}=0.080\ \mathrm{kg}80 g=0.080 kg. Then E=m×e=0.080 kg×43 MJ kg−1=3.44 MJE=m\times e=0.080\ \mathrm{kg}\times43\ \mathrm{MJ\,kg^{-1}}=3.44\ \mathrm{MJ}E=m×e=0.080 kg×43 MJkg−1=3.44 MJ. Using 80 as though it were kilograms gives an answer a thousand times too large.
8.

Medium·Determine[2 marks]

A device burns 0.10 kg0.10\ \mathrm{kg}0.10 kg of one fuel. Which fuel releases the greatest energy, using the specific energies hydrogen 120 MJ kg−1120\ \mathrm{MJ\,kg^{-1}}120 MJkg−1, methane 50 MJ kg−150\ \mathrm{MJ\,kg^{-1}}50 MJkg−1, and ethanol 27 MJ kg−127\ \mathrm{MJ\,kg^{-1}}27 MJkg−1?
Show answer and explanation

Answer: B · Worked explanation

For hydrogen, E=0.10 kg×120 MJ kg−1=12 MJE=0.10\ \mathrm{kg}\times120\ \mathrm{MJ\,kg^{-1}}=12\ \mathrm{MJ}E=0.10 kg×120 MJkg−1=12 MJ. The same calculation gives 5.0 MJ5.0\ \mathrm{MJ}5.0 MJ for methane and 2.7 MJ2.7\ \mathrm{MJ}2.7 MJ for ethanol, so hydrogen releases the most for the same mass. Comparing only the numerical mass would ignore the fuels’ different specific energies.
9.

Medium·Deduce[2 marks]

A fuel burns in a poorly ventilated space and produces soot as well as heat. Deduce the most likely explanation.
Show answer and explanation

Answer: C · Worked explanation

Soot indicates that some carbon has not been fully oxidised, which is consistent with incomplete combustion when oxygen is insufficient. Complete combustion of a carbon-containing fuel produces carbon dioxide and water, not soot. The presence of soot does not mean the reaction is endothermic; combustion can still transfer energy to the surroundings.
10.

Hard·Determine[2 marks]

A campsite burns 0.12 kg0.12\ \mathrm{kg}0.12 kg of petrol or 0.10 kg0.10\ \mathrm{kg}0.10 kg of methane. Petrol has a specific energy of 43 MJ kg−143\ \mathrm{MJ\,kg^{-1}}43 MJkg−1 and methane 50 MJ kg−150\ \mathrm{MJ\,kg^{-1}}50 MJkg−1. Determine which burn releases more energy and by how much.
Show answer and explanation

Answer: A · Worked explanation

For petrol, E=0.12×43=5.16 MJE=0.12\times43=5.16\ \mathrm{MJ}E=0.12×43=5.16 MJ; for methane, E=0.10×50=5.00 MJE=0.10\times50=5.00\ \mathrm{MJ}E=0.10×50=5.00 MJ. Petrol therefore releases 5.16−5.00=0.16 MJ5.16-5.00=0.16\ \mathrm{MJ}5.16−5.00=0.16 MJ more. Methane has the higher energy per kilogram, but the larger petrol mass in this comparison makes its total energy slightly greater.

Keep going

Next topicR1.4 Entropy and spontaneityPrevious topicR1.2 Energy cycles in reactions

More in R1 · What drives chemical reactions?

  1. R1.1Measuring enthalpy changesNotes · 10 questions
  2. R1.2Energy cycles in reactionsNotes · 10 questions
  3. R1.3Energy from fuelsNotes · 10 questions
  4. R1.4Entropy and spontaneityNotes · 10 questions· HL only

All IB Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by IB Diploma Programme or any exam board.

On this page

0/4 read

  1. 1Combustion releases energy as fuels react with oxygen
  2. 2Energy per kilogram allows useful fuel comparisons
  3. 3Burned fuel mass determines the energy released
  4. 4Fuel choice affects emissions and resource use
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe