Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›IB Chemistry
  3. ›R1 What drives chemical reactions?
  4. ›R1.4 Entropy and spontaneity

IB Chemistry · R1 · What drives chemical reactions?

R1.4 Entropy and spontaneity

Explain entropy and Gibbs free energy, then predict how reaction conditions affect spontaneity.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
  • HL only
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Entropy describes how widely energy can spread
  1. 1Entropy describes how widely energy can spread
  2. 2Particle states help predict reaction entropy changes
  3. 3Gibbs free energy tests spontaneity at constant conditions
  4. 4Temperature changes the balance between enthalpy and entropy
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Entropy describes how widely energy can spread

Entropy, SSS, describes how widely energy can be distributed among possible arrangements of a system. A system generally has higher entropy when its particles have more ways to arrange themselves and share energy. Gases usually have higher entropy than liquids, which usually have higher entropy than solids. Heating a substance also increases its entropy.

The entropy change, ΔS\Delta SΔS, is the entropy of the products minus that of the reactants. It can be positive or negative. A reaction may reduce the system’s entropy yet still occur spontaneously. In a spontaneous change, the total entropy of the system and its surroundings increases.

Common mistake

Entropy is not adequately described as a measure of disorder. Think about possible arrangements and ways to distribute energy.

Key terms · tap one for its definition

Entropy

Entropy measures how widely energy can be distributed among possible arrangements of a system.

entropy change

Entropy change is the entropy of the products minus that of the reactants.

Part 1 done

2

Part 2 of 4: Particle states help predict reaction entropy changes

The number of gas particles often gives the clearest clue to a reaction’s entropy change. More gaseous particles usually mean more possible arrangements and a positive ΔS\Delta SΔS. Fewer gaseous particles usually mean a negative ΔS\Delta SΔS. Count gas particles using the balanced equation, not the number of different substances.

A phase change towards a less constrained state also increases entropy. Melting and vaporisation have positive ΔS\Delta SΔS values. Freezing and condensation have negative values. These predictions concern the system only. If competing changes occur, such as dissolving alongside new attractions between particles, a simple prediction may be unreliable.

Exam tip

When predicting a reaction’s entropy change, state which particles gain or lose possible arrangements.

Key term

phase change

A phase change is a transition between solid, liquid and gas states without changing a substance’s chemical identity.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the statement that best describes entropy in a chemical system.
Show answer and explanation

Answer: B · Worked explanation

Entropy describes how widely energy can be distributed among the possible arrangements of a system. It is not the total energy stored in bonds, and it does not measure reaction rate or the strength of particle attractions.
3

Part 3 of 4: Gibbs free energy tests spontaneity at constant conditions

Gibbs free energy, GGG, combines enthalpy and entropy in one measure. At constant temperature and pressure, ΔG<0\Delta G<0ΔG<0 means a reaction is thermodynamically spontaneous in the direction written. If ΔG>0\Delta G>0ΔG>0, the reverse direction is favoured. At equilibrium, ΔG=0\Delta G=0ΔG=0.

Spontaneous does not mean fast. A spontaneous reaction can proceed very slowly because it has a high activation energy. The sign of ΔG\Delta GΔG describes the direction of change, not its rate. It also depends on the conditions and composition of the reacting mixture. Standard Gibbs free energy change, ΔG∘\Delta G^\circΔG∘, refers to standard-state conditions. Its sign alone does not establish the direction of change for every mixture.

Common mistake

Do not use a negative ΔG\Delta GΔG to claim that a reaction happens quickly.

Key terms · tap one for its definition

Gibbs free energy

Gibbs free energy combines enthalpy and entropy to indicate the spontaneous direction at constant temperature and pressure.

Spontaneous

A spontaneous change is thermodynamically favoured under the stated conditions, regardless of how quickly it occurs.

Part 3 done

4

Part 4 of 4: Temperature changes the balance between enthalpy and entropy

At constant temperature, ΔG=ΔH−TΔS\Delta G=\Delta H-T\Delta SΔG=ΔH−TΔS, where TTT is in kelvin. Enthalpy change, ΔH\Delta HΔH, and TΔST\Delta STΔS must use matching energy units. A negative ΔH\Delta HΔH and positive ΔS\Delta SΔS give negative ΔG\Delta GΔG at every temperature. The opposite signs give positive ΔG\Delta GΔG at every temperature.

When both changes are positive, higher temperatures favour spontaneity. When both are negative, lower temperatures favour it. A threshold temperature occurs where ΔG=0\Delta G=0ΔG=0, so T=ΔHΔST=\frac{\Delta H}{\Delta S}T=ΔSΔH​. This relationship assumes the changes remain approximately constant over the temperature range.

Worked example

Checking spontaneity at a given temperature

A reaction has ΔH=+40 kJ mol−1\Delta H=+40\ \mathrm{kJ\,mol^{-1}}ΔH=+40 kJmol−1 and ΔS=+100 J K−1 mol−1\Delta S=+100\ \mathrm{J\,K^{-1}\,mol^{-1}}ΔS=+100 JK−1mol−1. Find ΔG\Delta GΔG at 500 K.
  1. 1
    Convert entropy units: ΔS=0.100 kJ K−1 mol−1\Delta S=0.100\ \mathrm{kJ\,K^{-1}\,mol^{-1}}ΔS=0.100 kJK−1mol−1.
  2. 2
    Calculate TΔS=(500 K)(0.100 kJ K−1 mol−1)=50 kJ mol−1T\Delta S=(500\ \mathrm{K})(0.100\ \mathrm{kJ\,K^{-1}\,mol^{-1}})=50\ \mathrm{kJ\,mol^{-1}}TΔS=(500 K)(0.100 kJK−1mol−1)=50 kJmol−1.
  3. 3
    Calculate ΔG=40−50=−10 kJ mol−1\Delta G=40-50=-10\ \mathrm{kJ\,mol^{-1}}ΔG=40−50=−10 kJmol−1.

Answer: ΔG=−10 kJ mol−1\Delta G=-10\ \mathrm{kJ\,mol^{-1}}ΔG=−10 kJmol−1. The forward reaction is spontaneous at 500 K under the stated conditions.

Figure 1. Temperature matters most when enthalpy and entropy changes have the same sign.

Key terms · tap one for its definition

Enthalpy change

Enthalpy change is the heat transferred by a process at constant pressure.

threshold temperature

The threshold temperature is the temperature where the calculated Gibbs free energy change equals zero.

Note read

Check your recall[14 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Define[2 marks]

    Define entropy in terms of energy distribution.

    Show mark schemeHide mark scheme

    Model answer

    Entropy describes how widely energy can be distributed among possible arrangements of a system.

    • 1 mark for describing the distribution of energy
    • 1 mark for linking that distribution to possible arrangements of the system
  2. 2.Predict[2 marks]

    Predict the sign of the entropy change when a liquid vaporises, and explain why.

    Show mark schemeHide mark scheme

    Model answer

    The entropy change is positive because gas particles have more possible arrangements than liquid particles.

    • 1 mark for predicting a positive entropy change
    • 1 mark for explaining that gas particles have more possible arrangements
  3. 3.Explain[3 marks]

    Explain what a negative Gibbs free energy change means at constant temperature and pressure.

    Show mark schemeHide mark scheme

    Model answer

    The forward reaction is thermodynamically spontaneous under those conditions. This does not mean it proceeds quickly, because its activation energy may be high.

    • 1 mark for identifying the forward direction as spontaneous
    • 1 mark for specifying that this applies under the stated conditions
    • 1 mark for distinguishing spontaneity from reaction rate
  4. 4.Calculate[4 marks]

    Calculate the Gibbs free energy change at 300 K when ΔH=−20 kJ mol−1\Delta H=-20\ \mathrm{kJ\,mol^{-1}}ΔH=−20 kJmol−1 and ΔS=−50 J K−1 mol−1\Delta S=-50\ \mathrm{J\,K^{-1}\,mol^{-1}}ΔS=−50 JK−1mol−1. State whether the forward reaction is spontaneous.

    Show mark schemeHide mark scheme

    Model answer

    ΔS=−0.050 kJ K−1 mol−1\Delta S=-0.050\ \mathrm{kJ\,K^{-1}\,mol^{-1}}ΔS=−0.050 kJK−1mol−1. Therefore, ΔG=−20−(300)(−0.050)=−5 kJ mol−1\Delta G=-20-(300)(-0.050)=-5\ \mathrm{kJ\,mol^{-1}}ΔG=−20−(300)(−0.050)=−5 kJmol−1. The forward reaction is spontaneous at 300 K.

    • 1 mark for converting the entropy change to −0.050 kJ K−1 mol−1-0.050\ \mathrm{kJ\,K^{-1}\,mol^{-1}}−0.050 kJK−1mol−1
    • 1 mark for substituting the values into ΔG=ΔH−TΔS\Delta G=\Delta H-T\Delta SΔG=ΔH−TΔS
    • 1 mark for obtaining −5 kJ mol−1-5\ \mathrm{kJ\,mol^{-1}}−5 kJmol−1
    • 1 mark for concluding that the forward reaction is spontaneous at 300 K
  5. 5.Explain[3 marks]

    Explain why increasing temperature can make a reaction with positive enthalpy and entropy changes spontaneous.

    Show mark schemeHide mark scheme

    Model answer

    In ΔG=ΔH−TΔS\Delta G=\Delta H-T\Delta SΔG=ΔH−TΔS, increasing temperature increases the positive TΔST\Delta STΔS term. It can exceed the positive enthalpy change, making ΔG\Delta GΔG negative.

    • 1 mark for using ΔG=ΔH−TΔS\Delta G=\Delta H-T\Delta SΔG=ΔH−TΔS
    • 1 mark for stating that TΔST\Delta STΔS increases as temperature rises
    • 1 mark for explaining that ΔG\Delta GΔG becomes negative when TΔST\Delta STΔS exceeds ΔH\Delta HΔH

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Predict[1 mark]

Predict the sign of the system’s entropy change when a gas condenses to form a liquid.
Show answer and explanation

Answer: B · Worked explanation

Condensation changes a gas into a more constrained liquid, reducing the number of ways particles can be arranged and energy distributed. The system’s entropy change is therefore negative. The unchanged chemical identity does not make the entropy change zero, and the direction of heat transfer alone does not determine its sign.
3.

Easy·State[1 mark]

State what ΔG=0\Delta G=0ΔG=0 indicates for a reaction mixture at constant temperature and pressure.
Show answer and explanation

Answer: D · Worked explanation

At equilibrium, ΔG=0\Delta G=0ΔG=0 for the reacting mixture. Neither direction is favoured overall. This does not imply a fast reaction or that the system and surroundings each have zero entropy change.
4.

Easy·Predict[1 mark]

Predict the sign of the system’s entropy change when a solid melts to form a liquid.
Show answer and explanation

Answer: B · Worked explanation

Melting gives particles more possible arrangements, so the system’s entropy increases and ΔS\Delta SΔS is positive.
5.

Medium·Deduce[2 marks]

Deduce the likely sign of ΔS\Delta SΔS for the reaction N2O4(g)→2NO2(g)\mathrm{N_2O_4(g)\rightarrow 2NO_2(g)}N2​O4​(g)→2NO2​(g).
Show answer and explanation

Answer: C · Worked explanation

The balanced equation has one mole of gaseous particles on the reactant side and two on the product side. More possible arrangements make ΔS\Delta SΔS likely positive.
6.

Medium·Explain[2 marks]

A reaction has ΔG<0\Delta G<0ΔG<0 under the stated conditions but proceeds very slowly. Explain why this is consistent with the meaning of ΔG\Delta GΔG.
Show answer and explanation

Answer: D · Worked explanation

A negative ΔG\Delta GΔG means the forward direction is thermodynamically spontaneous under those conditions, not that it proceeds rapidly. A high activation energy can make a spontaneous reaction slow.
7.

Medium·Calculate[2 marks]

Calculate ΔG\Delta GΔG at 400 K400\,\text{K}400K for a reaction with ΔH=+18 kJ mol−1\Delta H=+18\,\text{kJ mol}^{-1}ΔH=+18kJ mol−1 and ΔS=+60 J K−1 mol−1\Delta S=+60\,\text{J K}^{-1}\text{ mol}^{-1}ΔS=+60J K−1 mol−1.
Show answer and explanation

Answer: A · Worked explanation

Convert ΔS\Delta SΔS to 0.060 kJ K−1 mol−10.060\,\text{kJ K}^{-1}\text{ mol}^{-1}0.060kJ K−1 mol−1. Then TΔS=24 kJ mol−1T\Delta S=24\,\text{kJ mol}^{-1}TΔS=24kJ mol−1, so ΔG=ΔH−TΔS=18−24=−6 kJ mol−1\Delta G=\Delta H-T\Delta S=18-24=-6\,\text{kJ mol}^{-1}ΔG=ΔH−TΔS=18−24=−6kJ mol−1.
8.

Medium·Determine[2 marks]

Determine how temperature affects spontaneity when both ΔH\Delta HΔH and ΔS\Delta SΔS are negative, assuming they remain approximately constant.
Show answer and explanation

Answer: D · Worked explanation

When ΔS<0\Delta S<0ΔS<0, the term −TΔS-T\Delta S−TΔS is positive and grows with temperature. At sufficiently low temperatures, negative ΔH\Delta HΔH dominates and ΔG<0\Delta G<0ΔG<0.
9.

Medium·Calculate[2 marks]

A reaction has ΔH=+30 kJ mol−1\Delta H=+30\,\text{kJ mol}^{-1}ΔH=+30kJ mol−1 and ΔS=+75 J K−1 mol−1\Delta S=+75\,\text{J K}^{-1}\text{ mol}^{-1}ΔS=+75J K−1 mol−1. Calculate its threshold temperature, assuming the changes remain constant.
Show answer and explanation

Answer: A · Worked explanation

At the threshold, ΔG=0\Delta G=0ΔG=0, so T=ΔH/ΔST=\Delta H/\Delta ST=ΔH/ΔS. Converting ΔH\Delta HΔH to 30,000 J mol−130{,}000\,\text{J mol}^{-1}30,000J mol−1 gives T=30,000/75=400 KT=30{,}000/75=400\,\text{K}T=30,000/75=400K.
10.

Hard·Deduce[2 marks]

Deduce the likely sign of ΔS\Delta SΔS for C2H6(g)+H2(g)→2CH4(g)\mathrm{C_2H_6(g)+H_2(g)\rightarrow 2CH_4(g)}C2​H6​(g)+H2​(g)→2CH4​(g).
Show answer and explanation

Answer: D · Worked explanation

The balanced equation has two moles of gaseous particles on each side. Gas-particle count therefore does not provide a clear prediction; equal counts do not guarantee ΔS=0\Delta S=0ΔS=0.

Keep going

Next topicR2.1 Amount of chemical changePrevious topicR1.3 Energy from fuels

More in R1 · What drives chemical reactions?

  1. R1.1Measuring enthalpy changesNotes · 10 questions
  2. R1.2Energy cycles in reactionsNotes · 10 questions
  3. R1.3Energy from fuelsNotes · 10 questions
  4. R1.4Entropy and spontaneityNotes · 10 questions· HL only

All IB Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by IB Diploma Programme or any exam board.

On this page

0/4 read

  1. 1Entropy describes how widely energy can spread
  2. 2Particle states help predict reaction entropy changes
  3. 3Gibbs free energy tests spontaneity at constant conditions
  4. 4Temperature changes the balance between enthalpy and entropy
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe