Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›IB Mathematics: Analysis and Approaches
  3. ›3 Geometry and trigonometry
  4. ›3.18 Lines and planes: intersections and angles

IB Mathematics: Analysis and Approaches · Topic 3 · Geometry and trigonometry

3.18 Lines and planes: intersections and angles

Find where a line meets a plane, and calculate the angle between a line and a plane or between two planes.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
  • HL only
Start a Quick 5 on this topic→Jump to the 10 questions
1/5A line meets a plane once, never, or lies within it
  1. 1A line meets a plane once, never, or lies within it
  2. 2Substituting the line into the plane gives the intersection point
  3. 3The angle between a line and a plane uses the normal
  4. 4The angle between two planes equals the angle between their normals
  5. 5Parallel and perpendicular cases have quick tests
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: A line meets a plane once, never, or lies within it

Imagine pushing a pencil towards a sheet of card. It can pierce the card at a single point. It can run alongside without touching, or lie flat against it. Each case has a vector test.

Take a line r=a+tb\mathbf{r}=\mathbf{a}+t\mathbf{b}r=a+tb, where b\mathbf{b}b is its direction. Take a plane r⋅n=d\mathbf{r}\cdot\mathbf{n}=dr⋅n=d with normal vector n\mathbf{n}n. The key quantity is the scalar product b⋅n\mathbf{b}\cdot\mathbf{n}b⋅n.

If b⋅n≠0\mathbf{b}\cdot\mathbf{n}\neq0b⋅n=0, the line crosses the plane at exactly one point, called the intersection. If b⋅n=0\mathbf{b}\cdot\mathbf{n}=0b⋅n=0, the line is parallel to the plane. It then either lies in the plane or never meets it. Test whether the point with position vector a\mathbf{a}a satisfies the plane equation to decide which.

Key terms · tap one for its definition

normal vector

A normal vector is a non-zero vector perpendicular to every direction in a plane.

intersection

An intersection of a line and a plane is a point whose coordinates satisfy both the line equation and the plane equation.

Part 1 done

2

Part 2 of 5: Substituting the line into the plane gives the intersection point

Suppose b⋅n≠0\mathbf{b}\cdot\mathbf{n}\neq0b⋅n=0. Now you need the actual point. The method uses the parameter ttt of the line and the Cartesian equation of the plane.

  • Write xxx, yyy and zzz in terms of ttt.
  • Substitute them into the plane equation.
  • Solve the resulting equation for ttt.
  • Put this value of ttt back into the line.

Worked example

Line meeting a plane

Find where the line r=(1,2,0)+t(2,1,3)\mathbf{r}=(1,2,0)+t(2,1,3)r=(1,2,0)+t(2,1,3) meets the plane x+2y−z=9x+2y-z=9x+2y−z=9.
  1. 1
    Check b⋅n=(2,1,3)⋅(1,2,−1)=2+2−3=1\mathbf{b}\cdot\mathbf{n}=(2,1,3)\cdot(1,2,-1)=2+2-3=1b⋅n=(2,1,3)⋅(1,2,−1)=2+2−3=1, which is not zero.
  2. 2
    Write the coordinates: x=1+2tx=1+2tx=1+2t, y=2+ty=2+ty=2+t, z=3tz=3tz=3t.
  3. 3
    Substitute: (1+2t)+2(2+t)−3t=9(1+2t)+2(2+t)-3t=9(1+2t)+2(2+t)−3t=9, so 5+t=95+t=95+t=9 and t=4t=4t=4.
  4. 4
    Find the point: (1+8, 2+4, 12)=(9,6,12)(1+8,\ 2+4,\ 12)=(9,6,12)(1+8, 2+4, 12)=(9,6,12).
  5. 5
    Check in the plane: 9+12−12=99+12-12=99+12−12=9.

Answer: The line meets the plane at (9,6,12)(9,6,12)(9,6,12).

If the substitution gives a false statement such as 0=50=50=5, the line never meets the plane. If it gives a true statement such as 0=00=00=0, the line lies in the plane. Both cases happen only when b⋅n=0\mathbf{b}\cdot\mathbf{n}=0b⋅n=0.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the condition for a line with direction b\mathbf{b}b to be parallel to a plane with normal n\mathbf{n}n.
Show answer and explanation

Answer: C · Worked explanation

A line parallel to a plane runs at right angles to the normal, so the scalar product of its direction b\mathbf{b}b with n\mathbf{n}n is zero. The condition b=λn\mathbf{b}=\lambda\mathbf{n}b=λn describes the opposite case, where the line is perpendicular to the plane.
3

Part 3 of 5: The angle between a line and a plane uses the normal

Now ask how steeply the line meets the plane. The angle between a line and a plane is the smaller angle between the line and the plane. Call it θ\thetaθ.

It is easier to work with the normal. Let φ\varphiφ be the angle between the line and the normal. The two angles satisfy θ=90∘−φ\theta=90^{\circ}-\varphiθ=90∘−φ. Using the scalar product for φ\varphiφ gives sin⁡θ=∣b⋅n∣∣b∣∣n∣\sin\theta=\frac{|\mathbf{b}\cdot\mathbf{n}|}{|\mathbf{b}||\mathbf{n}|}sinθ=∣b∣∣n∣∣b⋅n∣​.

Figure 1. The angle theta between the line and the plane and the angle phi between the line and the normal together make a right angle.

Common mistake

Using cosine with the normal gives the angle to the normal, not the angle to the plane. The line-plane formula uses sine.

Worked example

Angle between a line and a plane

A line has direction b=(2,1,3)\mathbf{b}=(2,1,3)b=(2,1,3) and a plane has normal n=(1,2,−1)\mathbf{n}=(1,2,-1)n=(1,2,−1). Calculate the angle between them.
  1. 1
    b⋅n=2+2−3=1\mathbf{b}\cdot\mathbf{n}=2+2-3=1b⋅n=2+2−3=1.
  2. 2
    ∣b∣=14|\mathbf{b}|=\sqrt{14}∣b∣=14​ and ∣n∣=6|\mathbf{n}|=\sqrt{6}∣n∣=6​.
  3. 3
    sin⁡θ=114×6=184≈0.109\sin\theta=\frac{1}{\sqrt{14}\times\sqrt{6}}=\frac{1}{\sqrt{84}}\approx0.109sinθ=14​×6​1​=84​1​≈0.109.
  4. 4
    θ=sin⁡−1(0.109)≈6.3∘\theta=\sin^{-1}(0.109)\approx6.3^{\circ}θ=sin−1(0.109)≈6.3∘.

Answer: The angle between the line and the plane is θ≈6.3∘\theta\approx6.3^{\circ}θ≈6.3∘.

Key term

angle between a line and a plane

The angle between a line and a plane is the acute angle θ=90∘−φ\theta=90^{\circ}-\varphiθ=90∘−φ, where φ\varphiφ is the angle between the line and a normal.

Part 3 done

4

Part 4 of 5: The angle between two planes equals the angle between their normals

Think of a book half open. Its pages meet along the spine. Two planes that are not parallel likewise meet along a line. The angle between two planes is the acute angle between them. It equals the acute angle between their normal vectors n1\mathbf{n}_1n1​ and n2\mathbf{n}_2n2​.

The formula is cos⁡θ=∣n1⋅n2∣∣n1∣∣n2∣\cos\theta=\frac{|\mathbf{n}_1\cdot\mathbf{n}_2|}{|\mathbf{n}_1||\mathbf{n}_2|}cosθ=∣n1​∣∣n2​∣∣n1​⋅n2​∣​. The modulus signs give the acute angle. Without them, the result could be obtuse.

Each plane has many normal vectors, since any non-zero multiple works. Any choice gives the same angle, because the lengths in the denominator cancel the scaling.

Worked example

Angle between two planes

Calculate the angle between the planes x+2y−z=9x+2y-z=9x+2y−z=9 and 2x−y+2z=52x-y+2z=52x−y+2z=5.
  1. 1
    Read the normals: n1=(1,2,−1)\mathbf{n}_1=(1,2,-1)n1​=(1,2,−1) and n2=(2,−1,2)\mathbf{n}_2=(2,-1,2)n2​=(2,−1,2).
  2. 2
    n1⋅n2=2−2−2=−2\mathbf{n}_1\cdot\mathbf{n}_2=2-2-2=-2n1​⋅n2​=2−2−2=−2, so the modulus is 2.
  3. 3
    ∣n1∣=6|\mathbf{n}_1|=\sqrt{6}∣n1​∣=6​ and ∣n2∣=3|\mathbf{n}_2|=3∣n2​∣=3.
  4. 4
    cos⁡θ=236≈0.272\cos\theta=\frac{2}{3\sqrt{6}}\approx0.272cosθ=36​2​≈0.272, so θ≈74.2∘\theta\approx74.2^{\circ}θ≈74.2∘.

Answer: The angle between the planes is θ≈74.2∘\theta\approx74.2^{\circ}θ≈74.2∘.

Key term

angle between two planes

The angle between two planes is the acute angle between their normal vectors.

Part 4 done

Quick check

One question on the part you just read

Easy

State what the angle between two planes equals.
Show answer and explanation

Answer: D · Worked explanation

The angle between two planes is found from their normal vectors, because rotating a plane rotates its normal by the same amount. Position vectors depend on the choice of origin, so they cannot give the angle between the planes.
5

Part 5 of 5: Parallel and perpendicular cases have quick tests

Special cases arise often. You can check them without calculating any angle. Each test uses either a scalar product or a multiple. Recall that a zero scalar product means the two vectors are perpendicular. The table lists the four tests you need.

Tests for parallel and perpendicular cases

SituationTest
Line parallel to planeb⋅n=0\mathbf{b}\cdot\mathbf{n}=0b⋅n=0
Line perpendicular to planeb\mathbf{b}b is a multiple of n\mathbf{n}n
Planes paralleln1\mathbf{n}_1n1​ is a multiple of n2\mathbf{n}_2n2​
Planes perpendicularn1⋅n2=0\mathbf{n}_1\cdot\mathbf{n}_2=0n1​⋅n2​=0
Situation
Line parallel to plane
Test
b⋅n=0\mathbf{b}\cdot\mathbf{n}=0b⋅n=0
Situation
Line perpendicular to plane
Test
b\mathbf{b}b is a multiple of n\mathbf{n}n
Situation
Planes parallel
Test
n1\mathbf{n}_1n1​ is a multiple of n2\mathbf{n}_2n2​
Situation
Planes perpendicular
Test
n1⋅n2=0\mathbf{n}_1\cdot\mathbf{n}_2=0n1​⋅n2​=0

A line parallel to a plane makes an angle of 0∘0^{\circ}0∘ with it. A line perpendicular to the plane makes 90∘90^{\circ}90∘. Parallel planes make an angle of 0∘0^{\circ}0∘ with each other.

Exam tip

Parallel planes with matching constants are the same plane. Compare the constants before you call two planes distinct.

Note read

Check your recall[15 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Describe[3 marks]

    Describe how to find the point where a line r=a+tb\mathbf{r}=\mathbf{a}+t\mathbf{b}r=a+tb meets a plane given by a Cartesian equation.

    Show mark schemeHide mark scheme

    Model answer

    Write xxx, yyy and zzz in terms of ttt. Substitute them into the plane equation and solve for ttt. Put this ttt into the line to get the coordinates.

    • 1 mark for writing xxx, yyy and zzz in terms of ttt
    • 1 mark for substituting into the plane equation and solving for ttt
    • 1 mark for substituting the value of ttt into the line to obtain the coordinates
  2. 2.Distinguish[2 marks]

    Distinguish between the two cases that arise when a line has b⋅n=0\mathbf{b}\cdot\mathbf{n}=0b⋅n=0 for a plane with normal n\mathbf{n}n.

    Show mark schemeHide mark scheme

    Model answer

    The line is parallel to the plane and never meets it if the point a\mathbf{a}a does not satisfy the plane equation. It lies in the plane if the point a\mathbf{a}a does satisfy the plane equation.

    • 1 mark for stating that the line is parallel and does not meet the plane when the point on it fails the plane equation
    • 1 mark for stating that the line lies in the plane when the point on it satisfies the plane equation
  3. 3.Calculate[3 marks]

    Calculate the angle between a line with direction (3,0,4)(3,0,4)(3,0,4) and a plane with normal (0,0,1)(0,0,1)(0,0,1).

    Show mark schemeHide mark scheme

    Model answer

    sin⁡θ=∣(3,0,4)⋅(0,0,1)∣5×1=45\sin\theta=\frac{|(3,0,4)\cdot(0,0,1)|}{5\times1}=\frac{4}{5}sinθ=5×1∣(3,0,4)⋅(0,0,1)∣​=54​, so θ=sin⁡−1(0.8)≈53.1∘\theta=\sin^{-1}(0.8)\approx53.1^{\circ}θ=sin−1(0.8)≈53.1∘.

    • 1 mark for using sin⁡θ=∣b⋅n∣∣b∣∣n∣\sin\theta=\frac{|\mathbf{b}\cdot\mathbf{n}|}{|\mathbf{b}||\mathbf{n}|}sinθ=∣b∣∣n∣∣b⋅n∣​
    • 1 mark for finding b⋅n=4\mathbf{b}\cdot\mathbf{n}=4b⋅n=4 and ∣b∣=5|\mathbf{b}|=5∣b∣=5
    • 1 mark for obtaining θ≈53.1∘\theta\approx53.1^{\circ}θ≈53.1∘
  4. 4.Calculate[3 marks]

    Calculate the angle between the planes 2x+y−2z=72x+y-2z=72x+y−2z=7 and z=5z=5z=5.

    Show mark schemeHide mark scheme

    Model answer

    The normals are (2,1,−2)(2,1,-2)(2,1,−2) and (0,0,1)(0,0,1)(0,0,1). cos⁡θ=23×1\cos\theta=\frac{2}{3\times1}cosθ=3×12​, so θ≈48.2∘\theta\approx48.2^{\circ}θ≈48.2∘.

    • 1 mark for identifying the two normal vectors
    • 1 mark for using cos⁡θ=∣n1⋅n2∣∣n1∣∣n2∣\cos\theta=\frac{|\mathbf{n}_1\cdot\mathbf{n}_2|}{|\mathbf{n}_1||\mathbf{n}_2|}cosθ=∣n1​∣∣n2​∣∣n1​⋅n2​∣​ to obtain 23\frac{2}{3}32​
    • 1 mark for obtaining θ≈48.2∘\theta\approx48.2^{\circ}θ≈48.2∘
  5. 5.Explain[2 marks]

    Explain why the formula for the angle between a line and a plane uses sine, when the scalar product with the normal gives a cosine.

    Show mark schemeHide mark scheme

    Model answer

    The scalar product gives the angle φ\varphiφ between the line and the normal. The angle with the plane is θ=90∘−φ\theta=90^{\circ}-\varphiθ=90∘−φ, so sin⁡θ=cos⁡φ\sin\theta=\cos\varphisinθ=cosφ.

    • 1 mark for stating that the scalar product gives the angle φ\varphiφ between the line and the normal
    • 1 mark for linking θ=90∘−φ\theta=90^{\circ}-\varphiθ=90∘−φ to sin⁡θ=cos⁡φ\sin\theta=\cos\varphisinθ=cosφ
  6. 6.Deduce[2 marks]

    Deduce the relationship between the planes x+2y−z=4x+2y-z=4x+2y−z=4 and 3x+6y−3z=123x+6y-3z=123x+6y−3z=12.

    Show mark schemeHide mark scheme

    Model answer

    The second equation is 3 times the first on both sides. The normals are parallel and the constants match, so the planes are identical.

    • 1 mark for noting that the normals are parallel
    • 1 mark for noting that the constants scale by the same factor, so the planes are the same

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

Planes have normal vectors (1,2,3)(1,2,3)(1,2,3) and (2,4,6)(2,4,6)(2,4,6). Identify the relationship between the planes.
Show answer and explanation

Answer: B · Worked explanation

The second normal is twice the first, so the normals are parallel and the planes are parallel. Planes are perpendicular only when the scalar product of their normals is zero. Here it is 2+8+18=282+8+18=282+8+18=28, which rules out perpendicular planes.
4.

Medium·Calculate[1 mark]

Calculate the point where the line r=(1,0,2)+t(1,1,−1)\mathbf{r}=(1,0,2)+t(1,1,-1)r=(1,0,2)+t(1,1,−1) meets the plane x+y+z=6x+y+z=6x+y+z=6.
Show answer and explanation

Answer: C · Worked explanation

The coordinates are x=1+tx=1+tx=1+t, y=ty=ty=t and z=2−tz=2-tz=2−t. Substituting gives 3+t=63+t=63+t=6, so t=3t=3t=3 and the point is (4,3,−1)(4,3,-1)(4,3,−1). The point (7,6,−4)(7,6,-4)(7,6,−4) comes from setting t=6t=6t=6, which wrongly takes the right-hand side of the plane equation as the parameter.
5.

Medium·Calculate[2 marks]

A line has direction (2,−1,2)(2,-1,2)(2,−1,2) and a plane has normal (1,2,2)(1,2,2)(1,2,2). Calculate the angle between the line and the plane.
Show answer and explanation

Answer: B · Worked explanation

The scalar product is 2−2+4=42-2+4=42−2+4=4 and both lengths are 3, so sin⁡θ=49\sin\theta=\frac{4}{9}sinθ=94​ and θ≈26.4∘\theta\approx26.4^{\circ}θ≈26.4∘. The value 63.6∘63.6^{\circ}63.6∘ comes from using cosine, which gives the angle between the line and the normal instead.
6.

Medium·Calculate[2 marks]

Calculate the angle between the planes x+y=2x+y=2x+y=2 and y+z=5y+z=5y+z=5.
Show answer and explanation

Answer: B · Worked explanation

The normals are (1,1,0)(1,1,0)(1,1,0) and (0,1,1)(0,1,1)(0,1,1), with scalar product 1 and lengths 2\sqrt{2}2​ each. So cos⁡θ=12\cos\theta=\frac{1}{2}cosθ=21​ and θ=60∘\theta=60^{\circ}θ=60∘. The value 120∘120^{\circ}120∘ is the obtuse supplement. The angle between planes is taken as the acute angle.
7.

Medium·Determine[1 mark]

A line is r=(1,0,0)+t(2,1,3)\mathbf{r}=(1,0,0)+t(2,1,3)r=(1,0,0)+t(2,1,3) and a plane is x+y−z=5x+y-z=5x+y−z=5. Determine how the line and plane are related.
Show answer and explanation

Answer: D · Worked explanation

Here b⋅n=2+1−3=0\mathbf{b}\cdot\mathbf{n}=2+1-3=0b⋅n=2+1−3=0, so the line is parallel to the plane. The point (1,0,0)(1,0,0)(1,0,0) gives 1+0−0=11+0-0=11+0−0=1, not 5, so it is off the plane and the line never meets it. The line would lie in the plane only if this point satisfied the equation.
8.

Hard·Determine[2 marks]

The line r=(0,1,1)+t(1,1,1)\mathbf{r}=(0,1,1)+t(1,1,1)r=(0,1,1)+t(1,1,1) lies in the plane x+y−2z=kx+y-2z=kx+y−2z=k. Determine kkk.
Show answer and explanation

Answer: C · Worked explanation

A line lies in a plane when b⋅n=0\mathbf{b}\cdot\mathbf{n}=0b⋅n=0 and its point satisfies the equation. Here 1+1−2=01+1-2=01+1−2=0, and the point (0,1,1)(0,1,1)(0,1,1) gives 0+1−2=−10+1-2=-10+1−2=−1, so k=−1k=-1k=−1. The value 3 comes from a sign error, treating the zzz term as +2z+2z+2z.
9.

Hard·Calculate[2 marks]

A plane has equation r=(1,0,0)+λ(1,1,0)+μ(0,1,1)\mathbf{r}=(1,0,0)+\lambda(1,1,0)+\mu(0,1,1)r=(1,0,0)+λ(1,1,0)+μ(0,1,1). Calculate the angle between this plane and the plane z=3z=3z=3.
Show answer and explanation

Answer: C · Worked explanation

The vector product of the directions gives n1=(1,−1,1)\mathbf{n}_1=(1,-1,1)n1​=(1,−1,1), and the second plane has n2=(0,0,1)\mathbf{n}_2=(0,0,1)n2​=(0,0,1). So cos⁡θ=13\cos\theta=\frac{1}{\sqrt{3}}cosθ=3​1​ and θ≈54.7∘\theta\approx54.7^{\circ}θ≈54.7∘. The value 35.3∘35.3^{\circ}35.3∘ is the complement, which arises from using sine in place of cosine.
10.

Hard·State[2 marks]

A student uses cos⁡θ=∣b⋅n∣∣b∣∣n∣\cos\theta=\frac{|\mathbf{b}\cdot\mathbf{n}|}{|\mathbf{b}||\mathbf{n}|}cosθ=∣b∣∣n∣∣b⋅n∣​ for the angle between a line and a plane and gets 62∘62^{\circ}62∘. State the correct angle between the line and the plane.
Show answer and explanation

Answer: A · Worked explanation

The student found the angle between the line and the normal. The angle with the plane is 90∘−62∘=28∘90^{\circ}-62^{\circ}=28^{\circ}90∘−62∘=28∘. The value 62∘62^{\circ}62∘ repeats the error. The values 118∘118^{\circ}118∘ and 152∘152^{\circ}152∘ are obtuse, but angles between a line and a plane are acute.

Keep going

Next topic4.1 Sampling conceptsPrevious topic3.17 Vector equations of planes

More in Topic 3 · Geometry and trigonometry

  1. 3.10Compound angle identitiesNotes · 10 questions· HL only
  2. 3.11Symmetry of trig graphsNotes · 10 questions· HL only
  3. 3.12Introduction to vectorsNotes · 10 questions· HL only
  4. 3.13Scalar productNotes · 10 questions· HL only
  5. 3.14Vector equations of linesNotes · 10 questions· HL only
  6. 3.15Intersecting and skew linesNotes · 10 questions· HL only
  7. 3.16Vector productNotes · 10 questions· HL only
  8. 3.17Vector equations of planesNotes · 10 questions· HL only
  9. 3.18Lines and planes: intersections and anglesNotes · 10 questions· HL only

All IB Mathematics: Analysis and Approaches topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by IB Diploma Programme or any exam board.

On this page

0/5 read

  1. 1A line meets a plane once, never, or lies within it
  2. 2Substituting the line into the plane gives the intersection point
  3. 3The angle between a line and a plane uses the normal
  4. 4The angle between two planes equals the angle between their normals
  5. 5Parallel and perpendicular cases have quick tests
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe