Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›IB Physics
  3. ›B The particulate nature of matter
  4. ›B.1 Thermal energy transfers

IB Physics · Theme B · The particulate nature of matter

B.1 Thermal energy transfers

Explain how particles store and transfer thermal energy, and calculate heating and melting energy changes.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Temperature reflects the average kinetic energy of particles
  1. 1Temperature reflects the average kinetic energy of particles
  2. 2Heat transfers energy while internal energy belongs to a system
  3. 3Conduction, convection and radiation transfer energy differently
  4. 4Specific heat capacity links energy transfer to temperature change
  5. 5Latent heat changes state without changing temperature
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Temperature reflects the average kinetic energy of particles

Temperature indicates the average kinetic energy of particles. Particles in a substance move in different ways and at different speeds. In a gas, they travel between collisions. In a solid, they vibrate around fixed positions. A higher temperature means greater average kinetic energy. It does not mean every particle has the same energy.

The kelvin scale starts at absolute zero, the lowest possible temperature. An increase of one kelvin equals an increase of one degree Celsius. Temperature is not a measure of total energy. A larger sample can contain more energy than a smaller sample at the same temperature.

Key terms · tap one for its definition

Temperature

Temperature indicates the average kinetic energy of particles in a substance.

kelvin scale

The kelvin scale is an absolute temperature scale whose zero is the lowest possible temperature.

Part 1 done

2

Part 2 of 5: Heat transfers energy while internal energy belongs to a system

Internal energy is the total microscopic kinetic and potential energy of a system’s particles. Kinetic energy comes from their motion. Potential energy comes from interactions between them. Internal energy can change when particles move faster or their arrangement changes.

Heat is energy transferred because two places have different temperatures. It moves from a hotter place towards a cooler one. Once transferred, that energy contributes to the receiving system’s internal energy. Heat is therefore not energy stored inside a body. Energy can also enter or leave a system through work.

Common mistake

A body has internal energy, not a quantity of heat. Heat describes energy crossing a system boundary because of a temperature difference.

Key terms · tap one for its definition

Internal energy

Internal energy is the total microscopic kinetic and potential energy of a system’s particles.

Heat

Heat is energy transferred across a system boundary because of a temperature difference.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the quantity that temperature indicates for the particles in a substance.
Show answer and explanation

Answer: C · Worked explanation

Temperature indicates the average kinetic energy of the particles; a higher temperature corresponds to greater average kinetic energy. Total microscopic kinetic and potential energy is internal energy, not temperature, so the option describing total energy is a tempting but different quantity.
3

Part 3 of 5: Conduction, convection and radiation transfer energy differently

Conduction transfers energy through a material without bulk movement of that material. Particles pass energy to neighbours through interactions. In metals, mobile electrons also carry energy. Convection transfers energy through the bulk movement of a fluid. Heating often makes a region of fluid less dense, so it rises while cooler fluid sinks.

Thermal radiation transfers energy as electromagnetic waves, mainly infrared at ordinary temperatures. Unlike conduction and convection, it can travel through a vacuum. All objects emit thermal radiation. An object gains energy overall when it absorbs more radiation than it emits. These processes can occur together, but they use different ways to move energy.

Figure 1. Conduction passes energy through material. Convection moves fluid, while radiation can cross empty space.

Key terms · tap one for its definition

Conduction

Conduction transfers energy through a material without bulk movement of the material.

Convection

Convection transfers energy through the bulk movement of a fluid.

Thermal radiation

Thermal radiation transfers energy by electromagnetic waves emitted by matter.

Part 3 done

4

Part 4 of 5: Specific heat capacity links energy transfer to temperature change

Specific heat capacity is the energy needed to raise one kilogram of a substance by one kelvin. Without a change of state, the energy change is Q=mcΔTQ=mc\Delta TQ=mcΔT. Here, mmm is mass, ccc is specific heat capacity and ΔT\Delta TΔT is temperature change. The unit of ccc is J kg−1 K−1\mathrm{J\,kg^{-1}\,K^{-1}}Jkg−1K−1.

A larger mass needs more energy for the same temperature rise. Different substances need different amounts of energy. Use the magnitude of ΔT\Delta TΔT when calculating energy transferred during cooling. A temperature change has the same numerical value in kelvin and degrees Celsius.

Exam tip

State the mass in kilograms before substituting into Q=mcΔTQ=mc\Delta TQ=mcΔT. Check that the calculated energy is in joules.

Key term

Specific heat capacity

Specific heat capacity is the energy needed to raise one kilogram of a substance by one kelvin.

Part 4 done

Quick check

One question on the part you just read

Easy

State what must be true for energy transferred as heat to cross between two places.
Show answer and explanation

Answer: D · Worked explanation

Heat is energy transferred because two places have different temperatures, moving overall from hotter to cooler. Bulk fluid movement describes convection, but it is not required for heat transfer: conduction and radiation can also transfer energy.
5

Part 5 of 5: Latent heat changes state without changing temperature

During melting or boiling, energy can change a substance’s state while its temperature stays constant. This energy changes particle separation and potential energy, rather than average kinetic energy. Specific latent heat is the energy needed to change the state of one kilogram without changing its temperature. Calculate it using Q=mLQ=mLQ=mL, where LLL is measured in J kg−1\mathrm{J\,kg^{-1}}Jkg−1.

A substance has different latent heats for melting and vaporisation. If heating involves both a state change and a temperature rise, calculate each energy separately. Add the results to find the total energy supplied.

Worked example

Melting ice and warming the water

Melt 0.10 kg of ice at 0 °C, then warm the water to 20 °C. Use L=334 000  J kg−1L=334\,000\;\mathrm{J\,kg^{-1}}L=334000Jkg−1 and c=4 200  J kg−1 K−1c=4\,200\;\mathrm{J\,kg^{-1}\,K^{-1}}c=4200Jkg−1K−1. Find the energy needed.
  1. 1
    Melting: Q1=mL=0.10×334 000=33 400  JQ_1=mL=0.10\times334\,000=33\,400\;\mathrm{J}Q1​=mL=0.10×334000=33400J.
  2. 2
    Temperature rise: ΔT=20  K\Delta T=20\;\mathrm{K}ΔT=20K.
  3. 3
    Warming: Q2=mcΔT=0.10×4 200×20=8 400  JQ_2=mc\Delta T=0.10\times4\,200\times20=8\,400\;\mathrm{J}Q2​=mcΔT=0.10×4200×20=8400J.
  4. 4
    Total: Q=Q1+Q2=33 400+8 400=41 800  JQ=Q_1+Q_2=33\,400+8\,400=41\,800\;\mathrm{J}Q=Q1​+Q2​=33400+8400=41800J.

Answer: 41 800  J41\,800\;\mathrm{J}41800J of energy is needed.

Key term

Specific latent heat

Specific latent heat is the energy needed to change the state of one kilogram without changing its temperature.

Note read

Check your recall[16 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Explain[3 marks]

    Explain how temperature relates to particle motion and why equal temperatures do not imply equal internal energies.

    Show mark schemeHide mark scheme

    Model answer

    Temperature indicates average particle kinetic energy. Particles move or vibrate more energetically at higher temperatures. Systems at the same temperature can have different internal energies because they contain different amounts of matter.

    • 1 mark for linking temperature to average particle kinetic energy
    • 1 mark for stating that higher temperature means greater average kinetic energy
    • 1 mark for explaining that different amounts of matter can give different internal energies at the same temperature
  2. 2.Distinguish[2 marks]

    Distinguish heat from internal energy.

    Show mark schemeHide mark scheme

    Model answer

    Heat is energy transferred because of a temperature difference. Internal energy is the total microscopic kinetic and potential energy of a system’s particles.

    • 1 mark for identifying heat as energy transferred because of a temperature difference
    • 1 mark for identifying internal energy as the total microscopic kinetic and potential energy of a system’s particles
  3. 3.Compare[4 marks]

    Compare conduction, convection and radiation as methods of energy transfer.

    Show mark schemeHide mark scheme

    Model answer

    Conduction passes energy through a material without bulk movement. Convection transfers energy by bulk fluid movement. Radiation transfers energy as electromagnetic waves and can cross a vacuum. Conduction and convection need matter, but radiation does not.

    • 1 mark for describing conduction as transfer through material without bulk movement
    • 1 mark for describing convection as transfer through bulk fluid movement
    • 1 mark for describing radiation as transfer by electromagnetic waves
    • 1 mark for stating that radiation can cross a vacuum, unlike conduction and convection
  4. 4.Calculate[3 marks]

    Calculate the energy needed to warm 0.50 kg of water by 10 °C. Use c=4 200  J kg−1 K−1c=4\,200\;\mathrm{J\,kg^{-1}\,K^{-1}}c=4200Jkg−1K−1.

    Show mark schemeHide mark scheme

    Model answer

    ΔT=10  K\Delta T=10\;\mathrm{K}ΔT=10K. Using Q=mcΔTQ=mc\Delta TQ=mcΔT, Q=0.50×4 200×10=21 000  JQ=0.50\times4\,200\times10=21\,000\;\mathrm{J}Q=0.50×4200×10=21000J.

    • 1 mark for identifying the temperature change as 10 K
    • 1 mark for substituting the given values into Q=mcΔTQ=mc\Delta TQ=mcΔT
    • 1 mark for calculating 21 000  J21\,000\;\mathrm{J}21000J
  5. 5.Calculate[2 marks]

    Calculate the energy needed to melt 0.20 kg of ice at its melting temperature. Use L=334 000  J kg−1L=334\,000\;\mathrm{J\,kg^{-1}}L=334000Jkg−1.

    Show mark schemeHide mark scheme

    Model answer

    Q=mL=0.20×334 000=66 800  JQ=mL=0.20\times334\,000=66\,800\;\mathrm{J}Q=mL=0.20×334000=66800J.

    • 1 mark for substituting the given values into Q=mLQ=mLQ=mL
    • 1 mark for calculating 66 800  J66\,800\;\mathrm{J}66800J
  6. 6.Explain[2 marks]

    Explain why temperature stays constant while a substance melts.

    Show mark schemeHide mark scheme

    Model answer

    The supplied energy changes particle separation and potential energy. Average kinetic energy therefore stays constant, so temperature does not rise.

    • 1 mark for stating that supplied energy changes particle potential energy or separation
    • 1 mark for linking unchanged average kinetic energy to unchanged temperature

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

Identify the thermal energy transfer process that can operate across empty space.
Show answer and explanation

Answer: C · Worked explanation

Thermal radiation transfers energy by electromagnetic waves and can travel through a vacuum. Conduction requires material through which energy can pass, while convection requires bulk movement of a fluid, so neither can transfer energy across empty space.
4.

Easy·Identify[1 mark]

Identify the quantity represented by the symbol LLL in the equation Q=mLQ=mLQ=mL for a state change.
Show answer and explanation

Answer: D · Worked explanation

In Q=mLQ=mLQ=mL, LLL is the specific latent heat, the energy needed to change the state of one kilogram without changing its temperature. Specific heat capacity is used in Q=mcΔTQ=mc\Delta TQ=mcΔT for a temperature change without a state change.
5.

Medium·Deduce[2 marks]

Two samples of the same substance are at the same temperature, but sample X contains twice as much material as sample Y. What can be deduced about their particles and total internal energies?
Show answer and explanation

Answer: B · Worked explanation

Equal temperatures indicate equal average kinetic energy for the particles in the two samples. Since X contains more material, it can have greater total microscopic kinetic and potential energy; the tempting claim that equal temperature guarantees equal internal energy confuses an average with a total.
6.

Medium·Explain[2 marks]

A warm metal block is placed in cooler water. Which statement correctly describes heat and internal energy during the initial transfer?
Show answer and explanation

Answer: D · Worked explanation

Because the block is hotter, energy crosses from it to the cooler water as heat; this transfer changes the systems’ internal energies. The tempting description that the block contains heat is incorrect: heat names energy crossing a system boundary due to a temperature difference, rather than energy stored in a body.
7.

Medium·Determine[2 marks]

A heater warms liquid at the bottom of a container. The warmed liquid becomes less dense and rises, while cooler liquid sinks. Determine the main process transferring energy through the liquid.
Show answer and explanation

Answer: A · Worked explanation

The rising warm liquid and sinking cool liquid form bulk fluid movement, which transfers energy by convection. Conduction can also occur between neighbouring particles, but the described circulation—not energy passing through stationary material—is the defining process here.
8.

Medium·Calculate[2 marks]

A 0.30 kg0.30\,\mathrm{kg}0.30kg metal sample has a specific heat capacity of 500 J kg−1 K−1500\,\mathrm{J\,kg^{-1}\,K^{-1}}500Jkg−1K−1. Calculate the energy needed to raise its temperature by 8 K8\,\mathrm{K}8K without changing its state.
Show answer and explanation

Answer: C · Worked explanation

Use Q=mcΔTQ=mc\Delta TQ=mcΔT: Q=0.30×500×8=1 200 JQ=0.30\times500\times8=1\,200\,\text{J}Q=0.30×500×8=1200J. The tempting value 120 J120\,\text{J}120J results from an arithmetic or decimal-place error; the units also reduce to joules when kilograms, joules per kilogram per kelvin and kelvin are multiplied.
9.

Medium·Calculate[2 marks]

A 0.15 kg0.15\,\mathrm{kg}0.15kg solid melts at its melting temperature. Its specific latent heat of melting is 240 000 J kg−1240\,000\,\mathrm{J\,kg^{-1}}240000Jkg−1. Calculate the energy transferred during melting.
Show answer and explanation

Answer: B · Worked explanation

For melting, use Q=mLQ=mLQ=mL: Q=0.15×240 000=36 000 JQ=0.15\times240\,000=36\,000\,\text{J}Q=0.15×240000=36000J. The option 240 000 J240\,000\,\text{J}240000J mistakenly gives the energy per kilogram as the energy for the whole sample, without multiplying by its mass.
10.

Hard·Determine[2 marks]

A 0.20 kg0.20\,\mathrm{kg}0.20kg sample melts at its melting temperature and is then warmed by 15 K15\,\mathrm{K}15K. Its specific latent heat is 300 000 J kg−1300\,000\,\mathrm{J\,kg^{-1}}300000Jkg−1 and its specific heat capacity after melting is 2 000 J kg−1 K−12\,000\,\mathrm{J\,kg^{-1}\,K^{-1}}2000Jkg−1K−1. Determine the total energy supplied.
Show answer and explanation

Answer: A · Worked explanation

First calculate melting energy: Q1=mL=0.20×300 000=60 000 JQ_1=mL=0.20\times300\,000=60\,000\,\text{J}Q1​=mL=0.20×300000=60000J. Then calculate warming energy: Q2=mcΔT=0.20×2 000×15=6 000 JQ_2=mc\Delta T=0.20\times2\,000\times15=6\,000\,\text{J}Q2​=mcΔT=0.20×2000×15=6000J, giving Q1+Q2=66 000 JQ_1+Q_2=66\,000\,\text{J}Q1​+Q2​=66000J. The option 60 000 J60\,000\,\text{J}60000J omits the energy needed for the temperature rise.

Keep going

Next topicB.2 Greenhouse effectPrevious topicA.5 Galilean and special relativity

More in Theme B · The particulate nature of matter

  1. B.1Thermal energy transfersNotes · 10 questions
  2. B.2Greenhouse effectNotes · 10 questions
  3. B.3Gas lawsNotes · 10 questions
  4. B.4ThermodynamicsNotes · 10 questions· HL only
  5. B.5Current and circuitsNotes · 10 questions

All IB Physics topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by IB Diploma Programme or any exam board.

On this page

0/5 read

  1. 1Temperature reflects the average kinetic energy of particles
  2. 2Heat transfers energy while internal energy belongs to a system
  3. 3Conduction, convection and radiation transfer energy differently
  4. 4Specific heat capacity links energy transfer to temperature change
  5. 5Latent heat changes state without changing temperature
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe