Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›IB Physics
  3. ›B The particulate nature of matter
  4. ›B.4 Thermodynamics

IB Physics · Theme B · The particulate nature of matter

B.4 Thermodynamics

Explain thermodynamic energy changes, interpret pressure–volume diagrams, calculate work, and apply the second law.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
  • HL only
Start a Quick 5 on this topic→Jump to the 10 questions
1/5The first law accounts for every energy transfer
  1. 1The first law accounts for every energy transfer
  2. 2Heat and work describe different energy transfers
  3. 3Pressure–volume diagrams show paths and work
  4. 4Expansion work is the area under the path
  5. 5Entropy sets a direction for natural processes
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: The first law accounts for every energy transfer

A thermodynamic system is the matter chosen for study. Its surroundings are everything outside that boundary. The internal energy of a system is the total microscopic kinetic and potential energy of its particles. It can change when energy crosses the boundary as heat or work.

With work defined as work done by the system, the first law of thermodynamics is ΔU=Q−W\Delta U=Q-WΔU=Q−W. Here, QQQ is heat transferred into the system, and WWW is work done by it. This equation expresses energy conservation. Energy entering as heat either increases internal energy or leaves as work. A negative value of WWW means the surroundings do work on the system.

Exam tip

State your sign convention before substituting values. Different conventions give different-looking equations.

Key terms · tap one for its definition

thermodynamic system

A thermodynamic system is the matter selected for study, separated from its surroundings by a defined boundary.

internal energy

Internal energy is the total microscopic kinetic and potential energy of a system’s particles.

first law of thermodynamics

The first law states that a system’s internal energy changes through heat transfer and work, conserving energy.

Part 1 done

2

Part 2 of 5: Heat and work describe different energy transfers

Heat is energy transferred because of a temperature difference. It passes spontaneously from hotter to colder bodies. Work is energy transferred when a force acts through a distance. For a gas in a movable cylinder, expansion pushes the piston and does work on the surroundings. Compression transfers energy to the gas through work.

Heat and work describe transfers, not energy stored inside a system. After a transfer, the system may have a different internal energy. Its change depends on both transfers, not just one. An insulated system has no heat transfer, so Q=0Q=0Q=0. That condition does not prevent work: compressing an insulated gas can still increase its internal energy.

Common mistake

A gas does not contain a quantity of heat. Heat names energy crossing its boundary.

Key terms · tap one for its definition

heat

Heat is energy transferred between a system and its surroundings because of a temperature difference.

work

Work is energy transferred when a force acts through a distance.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the first-law equation when QQQ is heat transferred into a system and WWW is work done by the system.
Show answer and explanation

Answer: B · Worked explanation

With work defined as work done by the system, the first law is ΔU=Q−W\Delta U=Q-WΔU=Q−W. Heat entering increases the system’s energy, while work done by the system transfers energy out. The expression ΔU=Q+W\Delta U=Q+WΔU=Q+W would instead require a different convention in which positive work is done on the system.
3

Part 3 of 5: Pressure–volume diagrams show paths and work

A pressure–volume diagram plots pressure vertically and volume horizontally. Each point represents a state. A line shows the path taken between states. Moving right means expansion; moving left means compression. The area between a path and the volume axis gives the magnitude of the work done.

An isobaric process has constant pressure, so its path is horizontal. An isothermal process has constant temperature. For a fixed amount of ideal gas, its path curves downward during expansion because pVpVpV remains constant. The work depends on the path, even when the initial and final volumes match. When sketching, label both axes and show the direction of the process.

Figure 1. The isobaric path stays horizontal. The isothermal path curves downwards, giving a smaller area beneath it.

Key terms · tap one for its definition

pressure–volume diagram

A pressure–volume diagram plots a system’s pressure against volume and shows the path between states.

isobaric process

An isobaric process is a change of state at constant pressure.

isothermal process

An isothermal process is a change of state at constant temperature.

Part 3 done

4

Part 4 of 5: Expansion work is the area under the path

For isobaric work, W=p(V2−V1)W=p(V_2-V_1)W=p(V2​−V1​). Pressure must be in pascals and volume in cubic metres to obtain joules. For a fixed amount of ideal gas expanding isothermally, W=nRTln⁡(V2/V1)W=nRT\ln(V_2/V_1)W=nRTln(V2​/V1​). Since pV=nRTpV=nRTpV=nRT throughout this process, a known initial value of pVpVpV can replace nRTnRTnRT. Both expressions give positive work for expansion and negative work for compression.

Worked example

Compare work along two expansion paths

A gas expands from 0.002 m30.002\,\mathrm{m^3}0.002m3 to 0.004 m30.004\,\mathrm{m^3}0.004m3. Find the work if pressure stays at 100 kPa100\,\mathrm{kPa}100kPa. Then find it for an isothermal ideal-gas expansion starting at the same pressure and volume.
  1. 1
    Convert pressure: 100 kPa=100 000 Pa100\,\mathrm{kPa}=100\,000\,\mathrm{Pa}100kPa=100000Pa.
  2. 2
    Isobaric: W=pΔV=(100 000)(0.004−0.002)=200 JW=p\Delta V=(100\,000)(0.004-0.002)=200\,\mathrm{J}W=pΔV=(100000)(0.004−0.002)=200J.
  3. 3
    Isothermal: p1V1=(100 000)(0.002)=200 Jp_1V_1=(100\,000)(0.002)=200\,\mathrm{J}p1​V1​=(100000)(0.002)=200J.
  4. 4
    Calculate W=p1V1ln⁡(V2/V1)=200ln⁡2≈139 JW=p_1V_1\ln(V_2/V_1)=200\ln 2\approx139\,\mathrm{J}W=p1​V1​ln(V2​/V1​)=200ln2≈139J.

Answer: The gas does 200 J200\,\mathrm{J}200J of isobaric work or approximately 139 J139\,\mathrm{J}139J of isothermal work.

Exam tip

For isothermal work, use the natural logarithm. Check that the volume ratio has no units.

Key term

isobaric work

Isobaric work done by a system equals its constant pressure multiplied by its volume change.

Part 4 done

Quick check

One question on the part you just read

Easy

Identify the energy transfer that occurs when a warm object is placed in contact with a cooler object and energy passes between them because of their temperature difference.
Show answer and explanation

Answer: A · Worked explanation

Energy transferred because of a temperature difference is heat, and it passes spontaneously from the warmer object to the cooler one. Work is an energy transfer associated with a force acting through a distance. Internal energy and entropy describe properties of a system rather than this particular transfer across its boundary.
5

Part 5 of 5: Entropy sets a direction for natural processes

Entropy is a state quantity related to how widely energy is distributed among possible microscopic arrangements. When energy spreads out, entropy usually increases. The second law of thermodynamics states that the total entropy of an isolated system cannot decrease. It increases in an irreversible process and stays constant in an ideal reversible process.

For example, heat flows naturally from a hotter body to a colder one. The reverse transfer would reduce their combined entropy unless another change compensated for it. A refrigerator can move heat from cold to hot, but it needs work. Entropy may decrease in one part of a system while increasing by more elsewhere. The first law accounts for energy; the second law limits which changes happen naturally.

Key terms · tap one for its definition

entropy

Entropy is a state quantity related to the distribution of energy among possible microscopic arrangements.

second law of thermodynamics

The second law states that the total entropy of an isolated system cannot decrease.

Note read

Check your recall[16 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Explain[3 marks]

    Explain the first law using the convention that work done by the system is positive.

    Show mark schemeHide mark scheme

    Model answer

    The first law is ΔU=Q−W\Delta U=Q-WΔU=Q−W. Heat entering increases internal energy, while work done by the system transfers energy away. This accounts for energy conservation.

    • 1 mark for giving ΔU=Q−W\Delta U=Q-WΔU=Q−W with the stated sign convention
    • 1 mark for explaining that heat entering can increase internal energy
    • 1 mark for explaining that work done by the system transfers energy away, conserving energy
  2. 2.Distinguish[3 marks]

    Distinguish between heat, work and internal energy.

    Show mark schemeHide mark scheme

    Model answer

    Heat is energy transferred because of a temperature difference. Work is energy transferred when a force acts through a distance. Internal energy is microscopic energy stored in the system.

    • 1 mark for identifying heat as transfer caused by a temperature difference
    • 1 mark for identifying work as transfer by a force acting through a distance
    • 1 mark for identifying internal energy as the system’s microscopic kinetic and potential energy
  3. 3.Describe[3 marks]

    Describe isobaric and isothermal expansion paths on a pressure–volume diagram.

    Show mark schemeHide mark scheme

    Model answer

    Volume increases to the right. An isobaric path is horizontal because pressure is constant. For a fixed amount of ideal gas, an isothermal expansion curves downward because pVpVpV stays constant.

    • 1 mark for stating that expansion moves towards greater volume
    • 1 mark for describing the isobaric path as horizontal
    • 1 mark for describing the isothermal ideal-gas path as curving downwards with constant pVpVpV
  4. 4.Calculate[2 marks]

    Calculate the work done when a gas expands isobarically at 80 000 Pa80\,000\,\mathrm{Pa}80000Pa from 0.001 m30.001\,\mathrm{m^3}0.001m3 to 0.003 m30.003\,\mathrm{m^3}0.003m3.

    Show mark schemeHide mark scheme

    Model answer

    W=pΔV=(80 000)(0.003−0.001)=160 JW=p\Delta V=(80\,000)(0.003-0.001)=160\,\mathrm{J}W=pΔV=(80000)(0.003−0.001)=160J.

    • 1 mark for using W=p(V2−V1)W=p(V_2-V_1)W=p(V2​−V1​) with the correct values
    • 1 mark for obtaining 160 J160\,\mathrm{J}160J
  5. 5.Calculate[2 marks]

    Calculate isothermal expansion work when p1V1=300 Jp_1V_1=300\,\mathrm{J}p1​V1​=300J and the ideal gas doubles its volume.

    Show mark schemeHide mark scheme

    Model answer

    W=p1V1ln⁡(V2/V1)=300ln⁡2≈208 JW=p_1V_1\ln(V_2/V_1)=300\ln 2\approx208\,\mathrm{J}W=p1​V1​ln(V2​/V1​)=300ln2≈208J.

    • 1 mark for using W=p1V1ln⁡(V2/V1)=300ln⁡2W=p_1V_1\ln(V_2/V_1)=300\ln 2W=p1​V1​ln(V2​/V1​)=300ln2
    • 1 mark for obtaining approximately 208 J208\,\mathrm{J}208J
  6. 6.Explain[3 marks]

    Explain how entropy limits natural processes without contradicting energy conservation.

    Show mark schemeHide mark scheme

    Model answer

    Energy is conserved, but the total entropy of an isolated system cannot decrease. Natural irreversible processes increase it. Heat therefore flows spontaneously from hot to cold, while transfer from cold to hot requires a compensating change, such as work supplied to a refrigerator.

    • 1 mark for stating that energy remains conserved
    • 1 mark for stating that total entropy cannot decrease in an isolated system
    • 1 mark for linking spontaneous hot-to-cold heat flow, or cold-to-hot transfer requiring compensation, to the second law

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·State[1 mark]

State the direction of increasing volume on a pressure–volume diagram whose horizontal axis is volume and whose vertical axis is pressure.
Show answer and explanation

Answer: D · Worked explanation

Volume is plotted on the horizontal axis, so increasing volume means moving to the right. Moving left represents decreasing volume, or compression. Upwards and downwards indicate changes in pressure, not the direction of increasing volume.
4.

Easy·State[1 mark]

State the second-law condition on the total entropy of an isolated system.
Show answer and explanation

Answer: B · Worked explanation

The second law states that the total entropy of an isolated system cannot decrease. It increases in an irreversible process and is constant in an ideal reversible process. The constant-entropy option is therefore too restrictive, because it excludes irreversible changes.
5.

Medium·Calculate[2 marks]

A gas absorbs 120 J120\,\text{J}120J of heat and does 45 J45\,\text{J}45J of work on its surroundings. Calculate its change in internal energy.
Show answer and explanation

Answer: B · Worked explanation

Using ΔU=Q−W\Delta U=Q-WΔU=Q−W, substitute Q=120 JQ=120\,\text{J}Q=120J and W=45 JW=45\,\text{J}W=45J to obtain ΔU=120−45=75 J\Delta U=120-45=75\,\text{J}ΔU=120−45=75J. The tempting value 165 J165\,\text{J}165J comes from adding the work, but work done by the gas carries energy away from it under this sign convention.
6.

Medium·Deduce[2 marks]

An insulated gas is compressed by a piston. Deduce what happens to its heat transfer and, if work is done on the gas, to its internal energy.
Show answer and explanation

Answer: C · Worked explanation

Insulation means no heat crosses the boundary, so Q=0Q=0Q=0. Compression involves work being done on the gas, which is negative work done by the system; therefore ΔU=Q−W\Delta U=Q-WΔU=Q−W is positive. The misconception that insulation prevents all energy transfer overlooks that work can still cross the boundary.
7.

Medium·Determine[2 marks]

A fixed amount of ideal gas expands isothermally from volume V1V_1V1​ to 2V12V_12V1​. Determine how its pressure changes between the initial and final states.
Show answer and explanation

Answer: B · Worked explanation

For a fixed amount of ideal gas at constant temperature, pVpVpV is constant. Doubling the volume therefore requires the pressure to become half its initial value. Constant temperature does not mean constant pressure; that would only be possible here if the volume also stayed unchanged.
8.

Medium·Calculate[2 marks]

A gas expands at a constant pressure of 150 kPa150\,\text{kPa}150kPa from 1.5×10−3 m31.5\times10^{-3}\,\text{m}^31.5×10−3m3 to 3.5×10−3 m33.5\times10^{-3}\,\text{m}^33.5×10−3m3. Calculate the work done by the gas.
Show answer and explanation

Answer: C · Worked explanation

For an isobaric process, W=p(V2−V1)W=p(V_2-V_1)W=p(V2​−V1​). The pressure is 150 kPa=150 000 Pa150\,\text{kPa}=150\,000\,\text{Pa}150kPa=150000Pa and the volume change is 2.0×10−3 m32.0\times10^{-3}\,\text{m}^32.0×10−3m3, giving W=300 JW=300\,\text{J}W=300J. The negative value would describe compression, but the gas expands and does positive work.
9.

Medium·Explain[2 marks]

A refrigerator transfers heat from its cold interior to a warmer kitchen while receiving electrical energy. Explain how this can be consistent with the second law.
Show answer and explanation

Answer: D · Worked explanation

The second law constrains the total entropy of an isolated system, not the entropy of each part separately. Work supplied to the refrigerator enables heat transfer from cold to hot, while the entropy increase elsewhere can offset the decrease in the cold interior. The option claiming that cold-to-hot heat flow is spontaneous reverses the natural direction of heat transfer.
10.

Hard·Determine[2 marks]

An ideal gas expands isothermally from V1V_1V1​ to 3V13V_13V1​. At the initial state, p1V1=240 Jp_1V_1=240\,\text{J}p1​V1​=240J. Determine the work done by the gas, to the nearest joule.
Show answer and explanation

Answer: C · Worked explanation

For isothermal ideal-gas expansion, W=p1V1ln⁡(V2/V1)W=p_1V_1\ln(V_2/V_1)W=p1​V1​ln(V2​/V1​). Thus W=240ln⁡3 J≈263.7 JW=240\ln 3\,\text{J}\approx263.7\,\text{J}W=240ln3J≈263.7J, which rounds to 264 J264\,\text{J}264J. Multiplying p1V1p_1V_1p1​V1​ by 3 gives 720 J720\,\text{J}720J, but that incorrectly uses the volume ratio as a linear multiplier instead of taking its natural logarithm.

Keep going

Next topicB.5 Current and circuitsPrevious topicB.3 Gas laws

More in Theme B · The particulate nature of matter

  1. B.1Thermal energy transfersNotes · 10 questions
  2. B.2Greenhouse effectNotes · 10 questions
  3. B.3Gas lawsNotes · 10 questions
  4. B.4ThermodynamicsNotes · 10 questions· HL only
  5. B.5Current and circuitsNotes · 10 questions

All IB Physics topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by IB Diploma Programme or any exam board.

On this page

0/5 read

  1. 1The first law accounts for every energy transfer
  2. 2Heat and work describe different energy transfers
  3. 3Pressure–volume diagrams show paths and work
  4. 4Expansion work is the area under the path
  5. 5Entropy sets a direction for natural processes
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe