Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›IB Physics
  3. ›D Fields
  4. ›D.1 Gravitational fields

IB Physics · Theme D · Fields

D.1 Gravitational fields

Describe gravitational fields, calculate their strength, distinguish strength from potential, and sketch field lines.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4A mass creates a field directed towards itself
  1. 1A mass creates a field directed towards itself
  2. 2Field strength measures force on each kilogram
  3. 3Potential describes energy rather than force per mass
  4. 4Fields from several masses combine at every point
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: A mass creates a field directed towards itself

A gravitational field is a region where a mass experiences a gravitational force. Every mass produces one. The field’s direction at any point is the direction of the force on a small test mass placed there. Around a single spherical mass, this direction is radially inwards.

Field lines show the field’s direction. Their arrows point towards the mass. Draw lines closer together where the field is stronger. Around a single spherical mass, draw straight radial lines without crossings. The lines are a way to represent the field, not physical paths that objects must follow.

Common mistake

Field lines do not point away from a mass. Gravity attracts a test mass towards it.

Key terms · tap one for its definition

gravitational field

A gravitational field is a region in which a mass experiences a gravitational force.

field lines

Field lines represent a field’s direction with arrows and its relative strength through their spacing.

Part 1 done

2

Part 2 of 4: Field strength measures force on each kilogram

Gravitational field strength is the gravitational force per unit mass on a small test mass: g=F/mg=F/mg=F/m. Its unit is N kg−1\mathrm{N\,kg^{-1}}Nkg−1. For a spherical mass MMM, Newton’s law gives F=GMm/r2F=GMm/r^2F=GMm/r2. Dividing by the test mass mmm gives g=GM/r2g=GM/r^2g=GM/r2. Here, rrr is measured from the centre of MMM. This equation applies outside a spherical mass, including at its surface.

Worked example

Field strength at a planet’s surface

A spherical planet has mass 6.0×1024 kg6.0\times10^{24}\,\mathrm{kg}6.0×1024kg and radius 6.4×106 m6.4\times10^6\,\mathrm{m}6.4×106m. Calculate surface field strength using G=6.67×10−11 N m2 kg−2G=6.67\times10^{-11}\,\mathrm{N\,m^2\,kg^{-2}}G=6.67×10−11Nm2kg−2.
  1. 1
    Use g=GM/r2g=GM/r^2g=GM/r2.
  2. 2
    Substitute: g=(6.67×10−11)(6.0×1024)(6.4×106)2g=\frac{(6.67\times10^{-11})(6.0\times10^{24})}{(6.4\times10^6)^2}g=(6.4×106)2(6.67×10−11)(6.0×1024)​.
  3. 3
    Evaluate: g=9.7705… N kg−1g=9.7705\ldots\,\mathrm{N\,kg^{-1}}g=9.7705…Nkg−1.

Answer: g=9.8 N kg−1g=9.8\,\mathrm{N\,kg^{-1}}g=9.8Nkg−1 to two significant figures.

Exam tip

Use the distance from the centre of the mass, not height above its surface.

Key term

gravitational field strength

Gravitational field strength is the gravitational force per unit mass on a small test mass.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify what the direction of the gravitational field at a point specifies.
Show answer and explanation

Answer: C · Worked explanation

The field direction is defined as the direction of the gravitational force on a small test mass placed at that point. It does not specify the test mass’s velocity or its eventual path, since motion can also depend on its initial conditions. Nor does it describe the force on the source mass itself.
3

Part 3 of 4: Potential describes energy rather than force per mass

Gravitational potential is gravitational potential energy per unit mass. Its unit is J kg−1\mathrm{J\,kg^{-1}}Jkg−1. With zero potential at infinity, the potential outside a spherical mass is V=−GM/rV=-GM/rV=−GM/r. It is negative because energy must be supplied to move a mass from that position to infinity.

Potential is a scalar: contributions from several masses add as numbers. Field strength is a vector: contributions must be added with their directions. A change in potential gives the work done per unit mass when moving between positions. Field strength instead gives the force per unit mass at one position. The field points towards decreasing potential.

Common mistake

Potential is not the same as potential energy. Potential energy also depends on the mass placed in the field.

Key term

gravitational potential

Gravitational potential is gravitational potential energy per unit mass, relative to a chosen zero.

Part 3 done

4

Part 4 of 4: Fields from several masses combine at every point

The resultant field at a point is the vector sum of the fields from all masses. To sketch it, first consider the inward field from each mass. Then combine their directions and relative strengths. Draw arrows along the resultant field. Lines must not cross, because the field has only one direction at a point.

For two equal masses, the field is zero at their midpoint. On the line joining them, arrows point towards the nearer mass on either side of that point. Away from this line, the field lines curve towards the masses. Use a symmetric pattern for equal masses. Denser lines near a mass show a stronger field, not a greater number of separate fields.

Figure 1. Arrows point towards masses. Between two equal masses, the field is zero at the midpoint.

Key term

resultant field

The resultant field at a point is the vector sum of the gravitational fields from all masses.

Note read

Check your recall[16 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Describe[3 marks]

    Describe the direction and pattern of field lines around one spherical mass.

    Show mark schemeHide mark scheme

    Model answer

    The lines are radial and point inwards towards the mass. They are closer together where the field is stronger.

    • 1 mark for describing the lines as radial
    • 1 mark for stating that arrows point towards the mass
    • 1 mark for linking closer line spacing to greater field strength
  2. 2.Calculate[3 marks]

    Calculate the field strength 4.0 m from the centre of a spherical mass of 8.0×1010 kg8.0\times10^{10}\,\mathrm{kg}8.0×1010kg. Use G=6.67×10−11 N m2 kg−2G=6.67\times10^{-11}\,\mathrm{N\,m^2\,kg^{-2}}G=6.67×10−11Nm2kg−2.

    Show mark schemeHide mark scheme

    Model answer

    g=GM/r2=(6.67×10−11)(8.0×1010)/(4.0)2=0.33 N kg−1g=GM/r^2=(6.67\times10^{-11})(8.0\times10^{10})/(4.0)^2=0.33\,\mathrm{N\,kg^{-1}}g=GM/r2=(6.67×10−11)(8.0×1010)/(4.0)2=0.33Nkg−1.

    • 1 mark for using g=GM/r2g=GM/r^2g=GM/r2
    • 1 mark for substituting the given mass and centre-to-point distance correctly
    • 1 mark for obtaining 0.33 N kg−10.33\,\mathrm{N\,kg^{-1}}0.33Nkg−1
  3. 3.Distinguish[4 marks]

    Distinguish gravitational field strength from gravitational potential.

    Show mark schemeHide mark scheme

    Model answer

    Field strength is force per unit mass and is a vector measured in N kg−1\mathrm{N\,kg^{-1}}Nkg−1. Potential is potential energy per unit mass and is a scalar measured in J kg−1\mathrm{J\,kg^{-1}}Jkg−1.

    • 1 mark for defining field strength as force per unit mass
    • 1 mark for defining potential as potential energy per unit mass
    • 1 mark for identifying field strength as a vector and potential as a scalar
    • 1 mark for giving N kg−1\mathrm{N\,kg^{-1}}Nkg−1 and J kg−1\mathrm{J\,kg^{-1}}Jkg−1 as their respective units
  4. 4.Explain[3 marks]

    Explain why the gravitational field is zero at the midpoint between two equal masses.

    Show mark schemeHide mark scheme

    Model answer

    Each mass produces a field directed towards itself. At the midpoint, the two fields have equal strengths but opposite directions. Their vector sum is zero.

    • 1 mark for stating that each field points towards its source mass
    • 1 mark for recognising equal strengths in opposite directions at the midpoint
    • 1 mark for concluding that the vector sum is zero
  5. 5.Sketch[3 marks]

    Sketch field lines around two equal masses, showing their directions and the field at their midpoint.

    Show mark schemeHide mark scheme

    Model answer

    Draw a pattern symmetric about the midpoint, with lines pointing towards both masses. Curve lines away from the line joining the masses without crossings. Mark zero field at the midpoint.

    • 1 mark for drawing a symmetric field-line pattern around the equal masses
    • 1 mark for showing arrows towards the masses without crossing lines
    • 1 mark for marking zero field at the midpoint

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·State[1 mark]

State the SI unit of gravitational field strength.
Show answer and explanation

Answer: D · Worked explanation

Gravitational field strength is force per unit mass, so its unit is N kg−1\mathrm{N\,kg^{-1}}Nkg−1. The unit J kg−1\mathrm{J\,kg^{-1}}Jkg−1 belongs to gravitational potential. The units involving N m2 kg−2\mathrm{N\,m^2\,kg^{-2}}Nm2kg−2 describe the gravitational constant, while kg m s−1\mathrm{kg\,m\,s^{-1}}kgms−1 is a unit of momentum.
3.

Easy·Identify[1 mark]

Identify the quantity that is a scalar and has units of J kg−1\mathrm{J\,kg^{-1}}Jkg−1.
Show answer and explanation

Answer: A · Worked explanation

Gravitational potential is potential energy per unit mass, so its unit is J kg−1\mathrm{J\,kg^{-1}}Jkg−1, and it is a scalar. Field strength is a vector measured in N kg−1\mathrm{N\,kg^{-1}}Nkg−1. Potential energy is not per unit mass, and force is a vector measured in newtons.
4.

Easy·Identify[1 mark]

Identify the field-line pattern that represents the gravitational field outside an isolated spherical mass.
Show answer and explanation

Answer: D · Worked explanation

Outside an isolated spherical mass, the field is directed radially inwards, so its field lines are straight radial lines with arrows towards the mass. Outward arrows would represent a repulsive field, while circular lines do not show the gravitational field direction. Parallel lines would not represent the changing radial direction around a spherical mass.
5.

Medium·Calculate[2 marks]

Calculate the gravitational field strength at a distance of 3.0 m3.0\,\mathrm{m}3.0m from the centre of a spherical mass of 2.0×1010 kg2.0\times10^{10}\,\mathrm{kg}2.0×1010kg. Use G=6.67×10−11 N m2 kg−2G=6.67\times10^{-11}\,\mathrm{N\,m^2\,kg^{-2}}G=6.67×10−11Nm2kg−2.
Show answer and explanation

Answer: B · Worked explanation

Use g=GM/r2g=GM/r^2g=GM/r2. Substitution gives g=(6.67×10−11)(2.0×1010)/(3.0)2=1.334/9≈0.15 N kg−1g=(6.67\times10^{-11})(2.0\times10^{10})/(3.0)^2=1.334/9\approx0.15\,\mathrm{N\,kg^{-1}}g=(6.67×10−11)(2.0×1010)/(3.0)2=1.334/9≈0.15Nkg−1. The tempting value 0.44 N kg−10.44\,\mathrm{N\,kg^{-1}}0.44Nkg−1 comes from using rrr rather than r2r^2r2 in the denominator.
6.

Medium·Determine[2 marks]

A spherical planet has radius 4.0×106 m4.0\times10^6\,\mathrm{m}4.0×106m. A point is 2.0×106 m2.0\times10^6\,\mathrm{m}2.0×106m above its surface. Determine the distance rrr from the planet’s centre to the point for use in g=GM/r2g=GM/r^2g=GM/r2.
Show answer and explanation

Answer: A · Worked explanation

The distance in g=GM/r2g=GM/r^2g=GM/r2 is measured from the centre of the spherical mass. Therefore, add the planet’s radius to the altitude: r=4.0×106+2.0×106=6.0×106 mr=4.0\times10^6+2.0\times10^6=6.0\times10^6\,\mathrm{m}r=4.0×106+2.0×106=6.0×106m. Using only the altitude, 2.0×106 m2.0\times10^6\,\mathrm{m}2.0×106m, incorrectly treats the surface as the centre.
7.

Medium·Calculate[2 marks]

At a point outside a spherical mass, GM=12 m3 s−2GM=12\,\mathrm{m^3\,s^{-2}}GM=12m3s−2 and the distance from its centre is 3.0 m3.0\,\mathrm{m}3.0m. Calculate the gravitational potential there, taking potential to be zero at infinity.
Show answer and explanation

Answer: D · Worked explanation

For a spherical mass with zero potential at infinity, V=−GM/rV=-GM/rV=−GM/r. Thus V=−12/3.0=−4.0 J kg−1V=-12/3.0=-4.0\,\mathrm{J\,kg^{-1}}V=−12/3.0=−4.0Jkg−1. The tempting positive value has the right magnitude but misses the minus sign: gravitational potential is negative under this convention because energy must be supplied to move a mass from that position to infinity.
8.

Medium·Deduce[2 marks]

Two identical spherical masses are separated by a distance ddd. A point between them lies on the line joining them, at a distance d/4d/4d/4 from the left-hand mass. Deduce the direction of the resultant gravitational field at the point.
Show answer and explanation

Answer: D · Worked explanation

The point is d/4d/4d/4 from the left mass and 3d/43d/43d/4 from the right mass. For equal masses, field strength varies as 1/r21/r^21/r2, so the nearer left mass produces the stronger field. The contributions point in opposite directions, making the resultant field point towards the left mass. Identical masses give zero field only at the midpoint.
9.

Medium·Identify[2 marks]

Two unequal masses lie on a horizontal line, with the larger mass on the left. Which description of field lines is consistent with this arrangement?
Show answer and explanation

Answer: C · Worked explanation

Gravitational field lines point towards their source masses, and closer spacing represents a stronger field. The larger mass produces a stronger field at comparable distances, so the pattern should be denser near it. Field lines cannot cross because that would assign two directions to the field at one point; outward arrows would incorrectly suggest repulsion.
10.

Hard·Determine[2 marks]

A spherical mass produces a field strength g0g_0g0​ at distance rrr from its centre. At what distance from the centre is its field strength g0/9g_0/9g0​/9?
Show answer and explanation

Answer: A · Worked explanation

For a fixed mass, g∝1/r2g\propto1/r^2g∝1/r2. If the field strength becomes g0/9g_0/9g0​/9, the squared distance must become nine times larger, so the distance becomes 3r3r3r. The tempting answer 9r9r9r treats field strength as inversely proportional to distance rather than to the square of distance.

Keep going

Next topicD.2 Electric and magnetic fieldsPrevious topicC.5 Doppler effect

More in Theme D · Fields

  1. D.1Gravitational fieldsNotes · 10 questions
  2. D.2Electric and magnetic fieldsNotes · 10 questions
  3. D.3Motion in electromagnetic fieldsNotes · 10 questions
  4. D.4InductionNotes · 10 questions· HL only

All IB Physics topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by IB Diploma Programme or any exam board.

On this page

0/4 read

  1. 1A mass creates a field directed towards itself
  2. 2Field strength measures force on each kilogram
  3. 3Potential describes energy rather than force per mass
  4. 4Fields from several masses combine at every point
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe