Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›IB Physics
  3. ›D Fields
  4. ›D.2 Electric and magnetic fields

IB Physics · Theme D · Fields

D.2 Electric and magnetic fields

Describe and draw electric and magnetic fields, and calculate electric field strength.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Electric fields show forces on positive test charges
  1. 1Electric fields show forces on positive test charges
  2. 2Parallel plates produce a nearly uniform electric field
  3. 3Electric field strength measures force per unit charge
  4. 4Currents create magnetic fields around wires and coils
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Electric fields show forces on positive test charges

An electric field is a region where a charge experiences an electric force. Its direction is the direction of the force on a positive test charge. A negative charge experiences a force in the opposite direction. Electric field lines show this direction using arrows. Lines leave positive charges and enter negative charges. They never cross, because the field has only one direction at each point.

Around an isolated point charge, field lines form a radial pattern. They point outwards for a positive charge and inwards for a negative charge. Lines drawn closer together represent a stronger field. The field becomes weaker further from the charge. Field lines are a drawing tool, not paths that charges must follow.

Figure 1. Arrows show the force direction on a positive test charge. Even spacing between the plates represents a uniform central field.

Key terms · tap one for its definition

electric field

A region where an electric charge experiences an electric force.

electric field lines

Drawn lines whose arrows show the force direction on a positive test charge.

point charge

A charge treated as concentrated at a single point.

Part 1 done

2

Part 2 of 4: Parallel plates produce a nearly uniform electric field

Between large, oppositely charged parallel plates, field lines run from the positive plate to the negative plate. In the central region, they are straight, parallel and evenly spaced. This represents a uniform electric field: its strength and direction are constant. A positive charge between the plates feels a force towards the negative plate. A negative charge feels a force towards the positive plate.

Near the plate edges, lines curve outwards. This is called fringing. The field there is not uniform, so the simple parallel-line pattern applies best away from the edges.

Common mistake

Field arrows do not point towards whichever charge is placed between the plates. They show the force direction for a positive test charge.

Key terms · tap one for its definition

uniform electric field

An electric field with constant strength and direction throughout a region.

fringing

The outward curving of field lines near the edges of charged plates.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the direction of the electric field at a point around a negative point charge.
Show answer and explanation

Answer: D · Worked explanation

The electric field direction is defined as the direction of the force on a positive test charge. A positive test charge is attracted to a negative point charge, so the field points radially inwards. The direction does not depend on which test charge is used to map the field.
3

Part 3 of 4: Electric field strength measures force per unit charge

Electric field strength is the force per unit positive test charge at a point. Calculate its magnitude using E=F/qE=F/qE=F/q, where FFF is force magnitude and qqq is charge magnitude. Its unit is N C−1\mathrm{N\,C^{-1}}NC−1. The field direction still follows the force on a positive charge. A negative charge experiences force in the opposite direction. At a fixed point, the field strength does not depend on the test charge used.

Worked example

Finding electric field strength

A charge of magnitude 2.0×10−6 C2.0\times10^{-6}\,\textrm{C}2.0×10−6C experiences a force of magnitude 0.010 N0.010\,\textrm{N}0.010N. Find the electric field strength.
  1. 1
    Use E=F/qE=F/qE=F/q.
  2. 2
    Substitute: E=0.010/(2.0×10−6)E=0.010/(2.0\times10^{-6})E=0.010/(2.0×10−6).
  3. 3
    Calculate: E=5.0×103 N C−1E=5.0\times10^{3}\,\mathrm{N\,C^{-1}}E=5.0×103NC−1.

Answer: 5.0×103 N C−15.0\times10^{3}\,\mathrm{N\,C^{-1}}5.0×103NC−1

Exam tip

Use the charge magnitude when calculating field strength. State direction separately if the question asks for it.

Key term

electric field strength

The electric force per unit positive test charge at a point.

Part 3 done

4

Part 4 of 4: Currents create magnetic fields around wires and coils

A magnetic field is a region where magnetic materials or moving charges can experience a force. Magnetic field lines show its direction. Outside a magnet, they point from north to south. Lines closer together indicate a stronger field, and lines never cross.

Around a straight current-carrying wire, field lines form concentric circles. Use the right-hand grip rule: point your thumb along conventional current. Your curled fingers show the field direction. Reversing the current reverses this direction. A solenoid is a coil of wire. Its field resembles a bar magnet’s field. Inside a long solenoid, the field is approximately uniform, with straight, parallel lines.

Figure 2. The field circles a straight wire. A solenoid produces an approximately uniform field inside its coil.

Key terms · tap one for its definition

magnetic field

A region where magnetic materials or moving charges can experience a magnetic force.

magnetic field lines

Drawn lines whose arrows show magnetic field direction.

current-carrying wire

A wire through which electric charge flows, producing a magnetic field around it.

solenoid

A coil of wire that produces a magnetic field when current flows through it.

Note read

Check your recall[13 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Describe[2 marks]

    Describe the electric field lines around an isolated positive point charge.

    Show mark schemeHide mark scheme

    Model answer

    The lines radiate outwards from the charge. They spread further apart with increasing distance.

    • 1 mark for describing radial lines pointing outwards
    • 1 mark for stating that the lines become further apart with distance
  2. 2.Explain[3 marks]

    Explain what the electric field pattern between oppositely charged parallel plates shows.

    Show mark schemeHide mark scheme

    Model answer

    In the central region, lines run from the positive plate to the negative plate. They are straight, parallel and evenly spaced, showing a uniform field. Near the edges, fringing makes the field non-uniform.

    • 1 mark for stating that lines point from the positive plate to the negative plate
    • 1 mark for linking straight, parallel, evenly spaced central lines to a uniform field
    • 1 mark for describing curved lines or a non-uniform field near the edges
  3. 3.Calculate[2 marks]

    Calculate the electric field strength where a charge of magnitude 4.0×10−6 C4.0\times10^{-6}\,\textrm{C}4.0×10−6C experiences a force of magnitude 0.020 N0.020\,\textrm{N}0.020N.

    Show mark schemeHide mark scheme

    Model answer

    E=F/q=0.020/(4.0×10−6)=5.0×103 N C−1E=F/q=0.020/(4.0\times10^{-6})=5.0\times10^{3}\,\mathrm{N\,C^{-1}}E=F/q=0.020/(4.0×10−6)=5.0×103NC−1.

    • 1 mark for using E=F/qE=F/qE=F/q with the given magnitudes
    • 1 mark for obtaining 5.0×103 N C−15.0\times10^{3}\,\mathrm{N\,C^{-1}}5.0×103NC−1
  4. 4.Describe[3 marks]

    Describe the magnetic field around a straight current-carrying wire, including its direction.

    Show mark schemeHide mark scheme

    Model answer

    Field lines form concentric circles around the wire. Point the right thumb along conventional current. The curled fingers show the field direction.

    • 1 mark for describing concentric circular field lines around the wire
    • 1 mark for pointing the right thumb along conventional current
    • 1 mark for using the curled fingers to identify field direction
  5. 5.Compare[3 marks]

    Compare the magnetic field patterns around a straight wire and inside a long solenoid.

    Show mark schemeHide mark scheme

    Model answer

    Both fields are produced by current and have directions shown by field lines. Around a straight wire, the lines are concentric circles. Inside a long solenoid, they are approximately straight and parallel, showing an approximately uniform field.

    • 1 mark for recognising that current produces both fields
    • 1 mark for describing concentric circular lines around the straight wire
    • 1 mark for describing approximately straight, parallel lines and a uniform field inside the solenoid

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Identify[1 mark]

Which description represents a uniform electric field between the central parts of two large, oppositely charged parallel plates?
Show answer and explanation

Answer: D · Worked explanation

In the central region between parallel plates, a uniform electric field has constant strength and direction. Its field lines are therefore straight, parallel and evenly spaced, with arrows from the positive plate to the negative plate. Curving and spreading lines would indicate a changing direction or strength rather than a uniform field.
3.

Easy·State[1 mark]

State the shape of the magnetic field lines around a long, straight current-carrying wire.
Show answer and explanation

Answer: A · Worked explanation

A current in a straight wire produces a magnetic field whose lines form concentric circles around the wire. The wire is at the centre of these circles. Straight lines parallel to the wire would not represent the circular field pattern produced by a straight current-carrying wire.
4.

Easy·Calculate[1 mark]

A positive test charge of magnitude 3.0×10−6 C3.0\times10^{-6}\,\text{C}3.0×10−6C experiences a force of magnitude 0.012 N0.012\,\text{N}0.012N. Calculate the electric field strength at its position.
Show answer and explanation

Answer: B · Worked explanation

Use E=F/qE=F/qE=F/q: E=0.012/(3.0×10−6)=4.0×103 N C−1E=0.012/(3.0\times10^{-6})=4.0\times10^{3}\,\text{N C}^{-1}E=0.012/(3.0×10−6)=4.0×103N C−1. Dividing the force by the charge gives the required force per unit charge. The option 2.5×10−4 N C−12.5\times10^{-4}\,\text{N C}^{-1}2.5×10−4N C−1 results from dividing the charge by the force instead.
5.

Medium·Deduce[2 marks]

A negative charge is placed between two oppositely charged plates. The electric field points from the left plate to the right plate. Deduce the direction of the force on the charge.
Show answer and explanation

Answer: C · Worked explanation

The electric field direction gives the force direction on a positive test charge, so a positive charge would be pushed to the right. A negative charge experiences force in the opposite direction and is therefore pushed to the left. The option saying there is no force confuses force direction with force magnitude: a negative charge still experiences an electric force.
6.

Medium·Interpret[2 marks]

A sketch of the field around a point charge has radial arrows pointing outwards, with the lines becoming more widely spaced farther from the charge. What can be deduced from this pattern?
Show answer and explanation

Answer: D · Worked explanation

Electric field lines point outwards from a positive point charge, so the arrow direction identifies the charge as positive. Increasing separation between lines represents a weaker field farther from the charge. The option identifying a negative charge uses the wrong arrow direction: field lines around a negative point charge point inwards.
7.

Medium·Calculate[1 mark]

At a point in an electric field, a charge of magnitude 8.0×10−7 C8.0\times10^{-7}\,\text{C}8.0×10−7C experiences a force of magnitude 2.4×10−3 N2.4\times10^{-3}\,\text{N}2.4×10−3N. Calculate the electric field strength.
Show answer and explanation

Answer: B · Worked explanation

Using E=F/qE=F/qE=F/q, substitute the magnitudes to get E=(2.4×10−3)/(8.0×10−7)E=(2.4\times10^{-3})/(8.0\times10^{-7})E=(2.4×10−3)/(8.0×10−7). This gives 3.0×103 N C−13.0\times10^{3}\,\text{N C}^{-1}3.0×103N C−1. The option 3.3×10−4 N C−13.3\times10^{-4}\,\text{N C}^{-1}3.3×10−4N C−1 comes from reversing the division and calculating charge divided by force.
8.

Medium·Determine[2 marks]

A straight vertical wire carries conventional current upwards. Viewed from above the wire, determine the direction of the magnetic field around it.
Show answer and explanation

Answer: B · Worked explanation

Point the right-hand thumb upwards, along the conventional current. Viewed from above, the curled fingers go anticlockwise around the wire, giving the magnetic field direction. The clockwise option reverses the right-hand grip rule; reversing the current would reverse the circular field direction.
9.

Medium·Identify[2 marks]

Which description best represents the magnetic field inside a long solenoid carrying a steady current?
Show answer and explanation

Answer: A · Worked explanation

Inside a long solenoid, the magnetic field is approximately uniform, so its field lines are straight, parallel and evenly spaced. The circular field around each individual wire turn does not describe the combined field inside the coil. The field inside a solenoid is not absent; it is particularly strong and approximately uniform.
10.

Hard·Explain[2 marks]

At a fixed point, a positive test charge of 2.0×10−6 C2.0\times10^{-6}\,\text{C}2.0×10−6C experiences a force of 6.0×10−3 N6.0\times10^{-3}\,\text{N}6.0×10−3N to the east. A negative test charge is then placed at the same point. Explain which statement is correct.
Show answer and explanation

Answer: C · Worked explanation

The field points east because that is the force direction on the positive test charge. Its strength is E=F/q=(6.0×10−3)/(2.0×10−6)=3.0×103 N C−1E=F/q=(6.0\times10^{-3})/(2.0\times10^{-6})=3.0\times10^{3}\,\text{N C}^{-1}E=F/q=(6.0×10−3)/(2.0×10−6)=3.0×103N C−1. A negative charge feels force opposite to the field, towards the west. The field itself does not change when a different test charge is used.

Keep going

Next topicD.3 Motion in electromagnetic fieldsPrevious topicD.1 Gravitational fields

More in Theme D · Fields

  1. D.1Gravitational fieldsNotes · 10 questions
  2. D.2Electric and magnetic fieldsNotes · 10 questions
  3. D.3Motion in electromagnetic fieldsNotes · 10 questions
  4. D.4InductionNotes · 10 questions· HL only

All IB Physics topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by IB Diploma Programme or any exam board.

On this page

0/4 read

  1. 1Electric fields show forces on positive test charges
  2. 2Parallel plates produce a nearly uniform electric field
  3. 3Electric field strength measures force per unit charge
  4. 4Currents create magnetic fields around wires and coils
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe