IB Physics · Theme D · Fields
D.4 Induction
Define magnetic flux and flux linkage, calculate induced emf, predict current direction, and explain alternating emf generation.
1/4Magnetic flux measures the field passing through an area
Part 1 of 4: Magnetic flux measures the field passing through an area
Imagine holding a flat coil in a magnetic field. Turning it changes how much field passes through its enclosed area. Magnetic flux through one turn is in a uniform field. Here, is magnetic flux density and is area. The angle is between the field and the surface normal. The normal is perpendicular to the coil. Flux is measured in weber (Wb), equivalent to .
Flux linkage adds the flux through every turn. For identical turns enclosing the same area, it is . Its unit is also Wb because the number of turns is dimensionless. Flux is greatest when the field follows the normal, and zero when it lies within the coil.
Key terms · tap one for its definition
Magnetic flux
Magnetic flux through a flat surface is in a uniform field, measured in Wb.
Flux linkage
Flux linkage is the sum of flux through a coil's turns; for identical turns it is , measured in Wb.
Part 2 of 4: Changing flux linkage produces an induced emf
Now consider moving the coil so its flux changes. Faraday's law gives the induced emf as for identical turns. Over a measured interval, the average emf is . The minus sign describes direction; use the magnitude when only the size is requested. Flux can change through changes in field strength, enclosed area, or orientation. Steady flux produces no induced emf.
Worked example
Average emf in a changing field
- The field is perpendicular to the coil, so .
- The change in flux per turn is .
- The change in flux linkage is .
- The emf magnitude is .
Answer: The average induced emf has a magnitude of 1.2 V.
Key term
Faraday's law
For identical turns, induced emf is , measured in volts.

Quick check
One question on the part you just read
Easy
Show answer and explanation
Answer: A · Worked explanation
Part 3 of 4: Lenz's law determines the induced current's direction
Lenz's law states that an induced current acts to oppose the change producing it. It opposes a change in magnetic flux, not necessarily the existing field. First decide whether flux through the coil increases or decreases. Then choose the direction of the induced field that resists that change. Finally, use the right-hand grip rule to find the current direction. Your thumb points along the induced field through the coil; your curled fingers show conventional current.
For example, consider an increasing field pointing into the page. The induced field points out of the page, so the current is anticlockwise. If that same field decreases, the induced field points into the page, so the current is clockwise. These directions are viewed while looking at the page. An emf may exist across an open coil, but a sustained current needs a closed conducting path.
Key terms · tap one for its definition
Lenz's law
An induced current has a direction that opposes the change in flux producing it.
Induced field
The induced field is the magnetic field produced by an induced current.
Part 4 of 4: A rotating coil generates an alternating emf
The same changing flux occurs when a coil rotates in a magnetic field. At constant angular speed , let from a position of maximum flux. Then through each turn, so the flux linkage is . Faraday's law gives . The peak emf is . More turns, a stronger field, a larger area, or faster rotation increases this peak.
The emf is zero when flux is greatest or least. At those positions, flux changes momentarily at zero rate. The emf is largest in magnitude when flux crosses zero. Its sign reverses after each half-turn, producing an alternating emf. Slip rings and brushes connect the rotating coil to an external circuit without changing that alternating output.
Key terms · tap one for its definition
Angular speed
Angular speed is the angle turned per unit time, measured in radians per second.
Alternating emf
An alternating emf repeatedly reverses polarity as time passes.
Check your recall[14 marks]
5 written questions. Answer each one in your head or on paper, then open the mark scheme.
- 1.Define[2 marks]
Define magnetic flux through a flat surface in a uniform field.
Show mark schemeHide mark scheme
Model answer
Magnetic flux is , where is measured between the field and the surface normal.
- 1 mark for giving
- 1 mark for identifying as the angle between the field and the surface normal
- 2.Calculate[3 marks]
A 50-turn coil encloses 0.020 m² per turn. A 0.40 T field is perpendicular to its surface. Calculate its flux linkage.
Show mark schemeHide mark scheme
Model answer
The flux per turn is . The flux linkage is .
- 1 mark for using because the field is perpendicular to the surface
- 1 mark for calculating the flux per turn as
- 1 mark for calculating the flux linkage as
- 3.Calculate[3 marks]
A coil's flux linkage falls from 0.80 Wb-turns to 0.20 Wb-turns in 0.15 s. Calculate the magnitude of its average induced emf.
Show mark schemeHide mark scheme
Model answer
The change in flux linkage has magnitude . Therefore .
- 1 mark for finding a change in flux linkage with magnitude
- 1 mark for dividing the change by 0.15 s
- 1 mark for giving the emf magnitude as 4.0 V
- 4.Explain[3 marks]
A field pointing into the page increases through a closed coil. Explain the induced current's direction.
Show mark schemeHide mark scheme
Model answer
The increasing into-page flux induces a field pointing out of the page. This opposes the increase. The right-hand grip rule gives an anticlockwise conventional current, viewed facing the page.
- 1 mark for recognising that flux into the page increases
- 1 mark for stating that the induced field points out of the page to oppose the increase
- 1 mark for identifying the conventional current as anticlockwise when viewed facing the page
- 5.Explain[3 marks]
Explain why a coil rotating at constant speed produces an alternating emf.
Show mark schemeHide mark scheme
Model answer
Rotation changes the angle between the coil normal and the field, changing flux linkage. Its rate of change produces an emf. That rate reverses sign each half-turn, so the emf reverses polarity.
- 1 mark for stating that rotation changes the angle and therefore the flux linkage
- 1 mark for linking induced emf to the rate of change of flux linkage
- 1 mark for explaining that the rate reverses sign each half-turn, reversing emf polarity

Practice this topic
10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)
0 right0 of 10 answered
Includes the quick check in the note above.
EasyState[1 mark]
Show answer and explanation
Answer: A · Worked explanation
EasyIdentify[1 mark]
Show answer and explanation
Answer: A · Worked explanation
EasyState[1 mark]
Show answer and explanation
Answer: B · Worked explanation
MediumCalculate[2 marks]
Show answer and explanation
Answer: C · Worked explanation
MediumCalculate[2 marks]
Show answer and explanation
Answer: B · Worked explanation
MediumDetermine[2 marks]
Show answer and explanation
Answer: D · Worked explanation
MediumDetermine[2 marks]
Show answer and explanation
Answer: A · Worked explanation
MediumCompare[2 marks]
Show answer and explanation
Answer: A · Worked explanation
HardDetermine[2 marks]
Show answer and explanation
Answer: B · Worked explanation