Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›IB Physics
  3. ›E Nuclear and quantum physics
  4. ›E.2 Quantum physics

IB Physics · Theme E · Nuclear and quantum physics

E.2 Quantum physics

Explain photon evidence and calculate photoelectron energy and particle wavelength.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
  • HL only
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Photoelectric emission depends on frequency, not just intensity
  1. 1Photoelectric emission depends on frequency, not just intensity
  2. 2Photon energy pays for release and kinetic energy
  3. 3Moving particles have wavelengths set by their momentum
  4. 4Compton scattering shows photons transfer momentum
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Photoelectric emission depends on frequency, not just intensity

The photoelectric effect is the emission of electrons from a surface when light strikes it. Below a threshold frequency, no electrons escape, however intense the light is. Above that frequency, emission begins without a measurable delay. Increasing the light's intensity then increases the number of emitted electrons. It does not increase their maximum kinetic energy.

These observations support a photon model of light. Each photon carries energy E=hfE=hfE=hf, where hhh is Planck's constant and fff is frequency. One electron absorbs energy from one photon. A photon below the threshold lacks enough energy to release an electron. More photons can release more electrons, but cannot make each photon more energetic.

Common mistake

Greater intensity does not overcome a frequency below the threshold. It supplies more photons, not more energy per photon.

Key terms · tap one for its definition

photoelectric effect

The photoelectric effect is the emission of electrons from a surface after it absorbs light.

threshold frequency

The threshold frequency is the lowest light frequency that can release an electron from a given surface.

photon

A photon is a quantum of electromagnetic radiation with energy E=hfE=hfE=hf.

Part 1 done

2

Part 2 of 4: Photon energy pays for release and kinetic energy

The work function ϕ\phiϕ is the minimum energy needed to release an electron from a surface. At the threshold, photon energy equals this minimum: ϕ=hf0\phi=hf_0ϕ=hf0​. Above the threshold, energy conservation gives the photoelectric equation Kmax⁡=hf−ϕ=h(f−f0)K_{\max}=hf-\phi=h(f-f_0)Kmax​=hf−ϕ=h(f−f0​). The maximum refers to electrons that escape without losing energy inside the material. An electron may leave with less kinetic energy.

Worked example

Finding maximum photoelectron energy

Light has frequency 8.00×1014 Hz8.00\times10^{14}\,\mathrm{Hz}8.00×1014Hz. A surface has threshold frequency 5.00×1014 Hz5.00\times10^{14}\,\mathrm{Hz}5.00×1014Hz. Find Kmax⁡K_{\max}Kmax​ using h=6.63×10−34 J sh=6.63\times10^{-34}\,\mathrm{J\,s}h=6.63×10−34Js.
  1. 1
    Kmax⁡=h(f−f0)K_{\max}=h(f-f_0)Kmax​=h(f−f0​)
  2. 2
    f−f0=(8.00−5.00)×1014=3.00×1014 Hzf-f_0=(8.00-5.00)\times10^{14}=3.00\times10^{14}\,\mathrm{Hz}f−f0​=(8.00−5.00)×1014=3.00×1014Hz
  3. 3
    Kmax⁡=(6.63×10−34)(3.00×1014)=1.99×10−19 JK_{\max}=(6.63\times10^{-34})(3.00\times10^{14})=1.99\times10^{-19}\,\mathrm{J}Kmax​=(6.63×10−34)(3.00×1014)=1.99×10−19J

Answer: Kmax⁡=1.99×10−19 JK_{\max}=1.99\times10^{-19}\,\mathrm{J}Kmax​=1.99×10−19J.

Exam tip

Keep energy units consistent. If the work function is in electronvolts, convert it before combining it with hfhfhf in joules.

Key terms · tap one for its definition

work function

The work function is the minimum energy required to release an electron from a surface.

photoelectric equation

The photoelectric equation relates maximum photoelectron kinetic energy to photon energy and work function: Kmax⁡=hf−ϕK_{\max}=hf-\phiKmax​=hf−ϕ.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the observation that is consistent with the photon model of the photoelectric effect.
Show answer and explanation

Answer: D · Worked explanation

The photon model explains the threshold because each photon must have at least the work-function energy to release an electron. The claim that sufficiently high intensity can overcome a frequency below threshold is tempting, but greater intensity supplies more photons rather than increasing the energy of each photon.
3

Part 3 of 4: Moving particles have wavelengths set by their momentum

A moving particle has a de Broglie wavelength λ=h/p\lambda=h/pλ=h/p. For a particle moving much slower than light, momentum is p=mvp=mvp=mv. Thus λ=h/(mv)\lambda=h/(mv)λ=h/(mv). Greater momentum means a shorter wavelength. Electron diffraction demonstrates that particles can show wave behaviour. A particle's wavelength does not mean that it follows a permanently wavy path.

Worked example

Finding an electron wavelength

An electron moves at 2.00×106 m s−12.00\times10^6\,\mathrm{m\,s^{-1}}2.00×106ms−1. Calculate its wavelength using m=9.11×10−31 kgm=9.11\times10^{-31}\,\mathrm{kg}m=9.11×10−31kg and h=6.63×10−34 J sh=6.63\times10^{-34}\,\mathrm{J\,s}h=6.63×10−34Js.
  1. 1
    p=mv=(9.11×10−31)(2.00×106)=1.82×10−24 kg m s−1p=mv=(9.11\times10^{-31})(2.00\times10^6)=1.82\times10^{-24}\,\mathrm{kg\,m\,s^{-1}}p=mv=(9.11×10−31)(2.00×106)=1.82×10−24kgms−1
  2. 2
    λ=hmv=6.63×10−34(9.11×10−31)(2.00×106)\lambda=\frac{h}{mv}=\frac{6.63\times10^{-34}}{(9.11\times10^{-31})(2.00\times10^6)}λ=mvh​=(9.11×10−31)(2.00×106)6.63×10−34​
  3. 3
    λ=3.64×10−10 m\lambda=3.64\times10^{-10}\,\mathrm{m}λ=3.64×10−10m

Answer: The de Broglie wavelength is 3.64×10−10 m3.64\times10^{-10}\,\mathrm{m}3.64×10−10m.

The calculation uses p=mvp=mvp=mv because this speed is far below light speed. For particles moving close to light speed, use relativistic momentum instead.

Key term

de Broglie wavelength

The de Broglie wavelength of a particle is its momentum-dependent wavelength, λ=h/p\lambda=h/pλ=h/p.

Part 3 done

4

Part 4 of 4: Compton scattering shows photons transfer momentum

In Compton scattering, a high-energy photon interacts with an electron and leaves in a new direction. The electron recoils. The scattered photon has less energy and a longer wavelength. Treating the interaction as a collision conserves both energy and momentum. A photon has photon momentum p=h/λ=E/cp=h/\lambda=E/cp=h/λ=E/c, despite having no rest mass.

Figure 1. The photon changes direction as the electron recoils. The outgoing photon has a longer wavelength.

The wavelength change depends on the photon's scattering angle. For an electron initially at rest, Δλ=hmec(1−cos⁡θ)\Delta\lambda=\frac{h}{m_ec}(1-\cos\theta)Δλ=me​ch​(1−cosθ). Here θ\thetaθ is the angle between the incoming and scattered photon directions. A forward-scattered photon has no wavelength change. A larger angle gives a larger increase. The electron receives the momentum and energy lost by the photon.

Key terms · tap one for its definition

Compton scattering

Compton scattering is an interaction in which a photon changes direction and wavelength while an electron recoils.

photon momentum

Photon momentum is momentum carried by light, with magnitude p=h/λ=E/cp=h/\lambda=E/cp=h/λ=E/c.

Note read

Check your recall[15 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Explain[3 marks]

    Explain why increasing light intensity cannot release electrons below the threshold frequency.

    Show mark schemeHide mark scheme

    Model answer

    Below the threshold, each photon has less energy than the work function. One electron absorbs energy from one photon. Greater intensity supplies more photons, but does not increase their individual energies.

    • 1 mark for stating that photon energy below the threshold is less than the work function
    • 1 mark for stating that one electron absorbs energy from one photon
    • 1 mark for explaining that increased intensity adds photons without increasing energy per photon
  2. 2.Calculate[3 marks]

    Calculate the maximum photoelectron kinetic energy for light at 8.00×1014 Hz8.00\times10^{14}\,\mathrm{Hz}8.00×1014Hz on a surface with threshold frequency 5.00×1014 Hz5.00\times10^{14}\,\mathrm{Hz}5.00×1014Hz. Use h=6.63×10−34 J sh=6.63\times10^{-34}\,\mathrm{J\,s}h=6.63×10−34Js.

    Show mark schemeHide mark scheme

    Model answer

    Kmax⁡=h(f−f0)=(6.63×10−34)(3.00×1014)=1.99×10−19 JK_{\max}=h(f-f_0)=(6.63\times10^{-34})(3.00\times10^{14})=1.99\times10^{-19}\,\mathrm{J}Kmax​=h(f−f0​)=(6.63×10−34)(3.00×1014)=1.99×10−19J.

    • 1 mark for using Kmax⁡=h(f−f0)K_{\max}=h(f-f_0)Kmax​=h(f−f0​)
    • 1 mark for calculating f−f0=3.00×1014 Hzf-f_0=3.00\times10^{14}\,\mathrm{Hz}f−f0​=3.00×1014Hz
    • 1 mark for giving Kmax⁡=1.99×10−19 JK_{\max}=1.99\times10^{-19}\,\mathrm{J}Kmax​=1.99×10−19J
  3. 3.Calculate[3 marks]

    Calculate the de Broglie wavelength of an electron moving at 2.00×106 m s−12.00\times10^6\,\mathrm{m\,s^{-1}}2.00×106ms−1. Use m=9.11×10−31 kgm=9.11\times10^{-31}\,\mathrm{kg}m=9.11×10−31kg and h=6.63×10−34 J sh=6.63\times10^{-34}\,\mathrm{J\,s}h=6.63×10−34Js.

    Show mark schemeHide mark scheme

    Model answer

    p=mv=1.82×10−24 kg m s−1p=mv=1.82\times10^{-24}\,\mathrm{kg\,m\,s^{-1}}p=mv=1.82×10−24kgms−1. Hence λ=h/p=3.64×10−10 m\lambda=h/p=3.64\times10^{-10}\,\mathrm{m}λ=h/p=3.64×10−10m.

    • 1 mark for using p=mvp=mvp=mv
    • 1 mark for using λ=h/p\lambda=h/pλ=h/p with the given values
    • 1 mark for giving λ=3.64×10−10 m\lambda=3.64\times10^{-10}\,\mathrm{m}λ=3.64×10−10m
  4. 4.Explain[4 marks]

    Explain how Compton scattering supports the idea that photons carry momentum.

    Show mark schemeHide mark scheme

    Model answer

    A photon scatters through an angle while an electron recoils. The scattered photon has a longer wavelength and less energy. Treating the photon as carrying momentum p=h/λp=h/\lambdap=h/λ allows both momentum and energy to be conserved in the interaction.

    • 1 mark for describing a photon changing direction during the interaction
    • 1 mark for stating that the electron recoils
    • 1 mark for stating that the scattered photon has a longer wavelength or less energy
    • 1 mark for explaining that photon momentum allows conservation of momentum and energy
  5. 5.Predict[2 marks]

    Predict how the scattered photon's wavelength changes as its scattering angle increases.

    Show mark schemeHide mark scheme

    Model answer

    Its wavelength increases. The change follows Δλ=hmec(1−cos⁡θ)\Delta\lambda=\frac{h}{m_ec}(1-\cos\theta)Δλ=me​ch​(1−cosθ), which grows as the angle increases.

    • 1 mark for predicting a larger wavelength increase
    • 1 mark for linking the increase to the angle dependence of 1−cos⁡θ1-\cos\theta1−cosθ

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·State[1 mark]

State the relationship between the work function ϕ\phiϕ and the threshold frequency f0f_0f0​ for a surface.
Show answer and explanation

Answer: C · Worked explanation

At the threshold frequency, a photon has just enough energy to release an electron, so its energy hf0hf_0hf0​ equals the work function: ϕ=hf0\phi=hf_0ϕ=hf0​. The expression h/f0h/f_0h/f0​ does not have units of energy and does not represent the photon energy.
3.

Easy·Identify[1 mark]

Identify the de Broglie wavelength expression for a particle with momentum ppp.
Show answer and explanation

Answer: D · Worked explanation

The de Broglie relation is λ=h/p\lambda=h/pλ=h/p, so a particle with greater momentum has a shorter wavelength. Multiplying hhh by ppp or dividing momentum by hhh does not give the required wavelength relationship.
4.

Easy·State[1 mark]

State what happens to the electron during Compton scattering.
Show answer and explanation

Answer: D · Worked explanation

In Compton scattering, the photon interacts with an electron and transfers some energy and momentum to it, causing the electron to recoil. Complete absorption with the electron remaining at rest would not describe the observed scattering interaction or its momentum transfer.
5.

Medium·Deduce[2 marks]

A metal surface emits electrons when illuminated at frequency f1f_1f1​. When the frequency is increased while the intensity is held constant, the maximum kinetic energy of the emitted electrons rises. Deduce the best explanation.
Show answer and explanation

Answer: C · Worked explanation

Photon energy is E=hfE=hfE=hf, so increasing frequency increases the energy available from each absorbed photon; after the work function is paid, the maximum kinetic energy rises. Increasing the number of photons per second would affect the number of emitted electrons, not the energy delivered by each photon.
6.

Medium·Calculate[2 marks]

Light of frequency 7.0×1014 Hz7.0\times10^{14}\,\text{Hz}7.0×1014Hz shines on a surface with work function 2.0×10−19 J2.0\times10^{-19}\,\text{J}2.0×10−19J. Calculate the maximum kinetic energy of an emitted electron, using h=6.63×10−34 J sh=6.63\times10^{-34}\,\text{J s}h=6.63×10−34J s.
Show answer and explanation

Answer: D · Worked explanation

Use Kmax⁡=hf−ϕK_{\max}=hf-\phiKmax​=hf−ϕ. The photon energy is (6.63×10−34)(7.0×1014)=4.64×10−19 J(6.63\times10^{-34})(7.0\times10^{14})=4.64\times10^{-19}\,\text{J}(6.63×10−34)(7.0×1014)=4.64×10−19J, so Kmax⁡=4.64×10−19−2.0×10−19=2.64×10−19 JK_{\max}=4.64\times10^{-19}-2.0\times10^{-19}=2.64\times10^{-19}\,\text{J}Kmax​=4.64×10−19−2.0×10−19=2.64×10−19J. The photon energy alone is not the maximum kinetic energy because some energy is needed to release the electron.
7.

Medium·Calculate[2 marks]

A particle has momentum 3.0×10−24 kg m s−13.0\times10^{-24}\,\text{kg m s}^{-1}3.0×10−24kg m s−1. Calculate its de Broglie wavelength using h=6.63×10−34 J sh=6.63\times10^{-34}\,\text{J s}h=6.63×10−34J s.
Show answer and explanation

Answer: D · Worked explanation

The de Broglie relation gives λ=h/p=(6.63×10−34)/(3.0×10−24)=2.21×10−10 m\lambda=h/p=(6.63\times10^{-34})/(3.0\times10^{-24})=2.21\times10^{-10}\,\text{m}λ=h/p=(6.63×10−34)/(3.0×10−24)=2.21×10−10m, which rounds to 2.2×10−10 m2.2\times10^{-10}\,\text{m}2.2×10−10m. Multiplying hhh and ppp instead of dividing gives neither the correct wavelength nor its units.
8.

Medium·Determine[2 marks]

A photon is scattered forwards by an electron initially at rest, so its scattering angle is 0∘0^\circ0∘. Determine the change in the photon's wavelength using Δλ=hmec(1−cos⁡θ)\Delta\lambda=\frac{h}{m_ec}(1-\cos\theta)Δλ=me​ch​(1−cosθ).
Show answer and explanation

Answer: C · Worked explanation

For θ=0∘\theta=0^\circθ=0∘, cos⁡θ=1\cos\theta=1cosθ=1, so Δλ=hmec(1−1)=0\Delta\lambda=\frac{h}{m_ec}(1-1)=0Δλ=me​ch​(1−1)=0. A positive wavelength shift is associated with a non-zero scattering angle; forward scattering does not produce the shift claimed by the tempting option.
9.

Medium·Determine[2 marks]

A surface has work function 3.0×10−19 J3.0\times10^{-19}\,\text{J}3.0×10−19J. Determine its threshold frequency using h=6.63×10−34 J sh=6.63\times10^{-34}\,\text{J s}h=6.63×10−34J s.
Show answer and explanation

Answer: C · Worked explanation

At threshold, ϕ=hf0\phi=hf_0ϕ=hf0​, so f0=ϕ/h=(3.0×10−19)/(6.63×10−34)=4.52×1014 Hzf_0=\phi/h=(3.0\times10^{-19})/(6.63\times10^{-34})=4.52\times10^{14}\,\text{Hz}f0​=ϕ/h=(3.0×10−19)/(6.63×10−34)=4.52×1014Hz, or 4.5×1014 Hz4.5\times10^{14}\,\text{Hz}4.5×1014Hz. Multiplying the work function by hhh would not solve for frequency and would give incorrect units.
10.

Hard·Deduce[2 marks]

Two beams of light shine separately on the same surface. Beam P is below the threshold frequency and has very high intensity; beam Q is above the threshold frequency and has low intensity. Deduce which outcome is possible.
Show answer and explanation

Answer: D · Worked explanation

Each photon in beam P has less energy than the work function, so increasing the number of such photons cannot release electrons. Photons in beam Q exceed the threshold energy and can cause emission even at low intensity, although the low intensity may mean fewer emitted electrons.

Keep going

Next topicE.3 Radioactive decayPrevious topicE.1 Structure of the atom

More in Theme E · Nuclear and quantum physics

  1. E.1Structure of the atomNotes · 10 questions
  2. E.2Quantum physicsNotes · 10 questions· HL only
  3. E.3Radioactive decayNotes · 10 questions
  4. E.4FissionNotes · 10 questions
  5. E.5Fusion and starsNotes · 10 questions

All IB Physics topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by IB Diploma Programme or any exam board.

On this page

0/4 read

  1. 1Photoelectric emission depends on frequency, not just intensity
  2. 2Photon energy pays for release and kinetic energy
  3. 3Moving particles have wavelengths set by their momentum
  4. 4Compton scattering shows photons transfer momentum
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe