Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›IB Physics
  3. ›E Nuclear and quantum physics
  4. ›E.4 Fission

IB Physics · Theme E · Nuclear and quantum physics

E.4 Fission

Explain how fission starts, how its chain reaction is controlled, and why its products matter.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4An absorbed neutron can split a heavy nucleus
  1. 1An absorbed neutron can split a heavy nucleus
  2. 2Released neutrons can sustain a chain reaction
  3. 3Fission releases far more energy per event
  4. 4Fission products create radiation and heat hazards
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: An absorbed neutron can split a heavy nucleus

Nuclear fission occurs when a heavy nucleus splits into smaller nuclei. In induced fission, the nucleus first absorbs a neutron. This can leave it unstable enough to split. The smaller nuclei are called fission fragments. The split also releases energy and usually two or three neutrons. These released neutrons may cause further fissions.

Uranium-235 can undergo fission after absorbing a slow neutron. Its fragments are not always the same pair of nuclei. The products therefore cannot be represented by just one fixed reaction. Energy is released because the products have less total mass than the initial nucleus and neutron. The difference appears mainly as kinetic energy of the fragments.

Common mistake

A neutron does not knock pieces off the nucleus. Its absorption can make the whole nucleus unstable enough to split.

Key terms · tap one for its definition

Nuclear fission

The splitting of a heavy nucleus into smaller nuclei, with energy and usually neutrons released.

fission fragments

The smaller nuclei formed when a heavy nucleus undergoes fission.

Part 1 done

2

Part 2 of 4: Released neutrons can sustain a chain reaction

A chain reaction occurs when neutrons from one fission cause further fissions. Some neutrons escape or are absorbed without causing fission. For a steady reaction, each fission must lead, on average, to one further fission. If the average is lower, the reaction dies away. If it is higher, the reaction rate increases.

A reactor keeps the reaction steady while extracting heat. A moderator slows neutrons, making them more likely to cause fission in uranium-235. Control rods absorb some neutrons. Moving them changes how many neutrons remain available for further fissions. Coolant carries heat away for use in generating electricity. These roles are different: slowing neutrons does not remove them from the reaction.

Figure 1. Neutrons from one split can start further splits. A steady reactor prevents the number of fissions from increasing each generation.

Key terms · tap one for its definition

chain reaction

A sequence in which neutrons released by fission cause further fissions.

moderator

A reactor material that slows neutrons, increasing their chance of causing fission in uranium-235.

Control rods

Movable reactor components that absorb neutrons to regulate the fission rate.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify what must happen to a uranium-235 nucleus for neutron-induced fission to begin.
Show answer and explanation

Answer: C · Worked explanation

In induced fission, the heavy nucleus absorbs an incoming neutron, which can leave it unstable enough to split into smaller nuclei. The idea that a neutron simply knocks fragments off the nucleus is misleading: absorption by the nucleus is the trigger described here.
3

Part 3 of 4: Fission releases far more energy per event

A fission event releases energy on a nuclear scale, typically around 200 MeV. A chemical reaction rearranges electrons and bonds without splitting nuclei. Its energy change is typically a few electronvolts per reacting molecule. Comparing individual events, fission releases tens of millions of times more energy. This is why a relatively small mass of nuclear fuel can yield substantial energy.

Worked example

Comparing energy per event

A fission releases 200 MeV. A chemical reaction releases 4 eV per reacting molecule. Compare their energy releases per event.
  1. 1
    Convert the fission energy: 200 MeV=200×106 eV200\,\mathrm{MeV}=200\times10^6\,\mathrm{eV}200MeV=200×106eV.
  2. 2
    Divide by the chemical energy: 200×106 eV4 eV=5.0×107\frac{200\times10^6\,\mathrm{eV}}{4\,\mathrm{eV}}=5.0\times10^74eV200×106eV​=5.0×107.

Answer: The fission releases 5.0×1075.0\times10^75.0×107 times as much energy per event. The ratio has no units.

This comparison concerns one fission and one reacting molecule. It does not compare complete power stations or equal masses of fuel.

Part 3 done

4

Part 4 of 4: Fission products create radiation and heat hazards

The main immediate products are fission fragments, neutrons and released energy. The fragments are often radioactive waste because they are unstable. Their radiation can damage living tissue, so spent fuel needs shielding and careful storage. Some waste remains hazardous for long periods.

Energy deposited in the fuel becomes heat. Even after the chain reaction stops, radioactive products continue releasing decay heat. Cooling must therefore continue to prevent overheating. A loss of cooling can damage the reactor and allow radioactive material to escape. Neutrons can also make some nearby materials radioactive. These hazards require shielding, containment and controlled handling.

Common mistake

Stopping the chain reaction does not stop all heat production. Radioactive products continue to release decay heat.

Key terms · tap one for its definition

radioactive waste

Radioactive material produced or affected by reactor operation that requires controlled handling and storage.

decay heat

Heat produced as radioactive products continue to decay after the fission chain reaction stops.

Note read

Check your recall[15 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Describe[3 marks]

    Describe how an incoming neutron can cause nuclear fission.

    Show mark schemeHide mark scheme

    Model answer

    A heavy nucleus absorbs the neutron and becomes unstable. It splits into smaller nuclei, releasing energy and usually further neutrons.

    • 1 mark for stating that the heavy nucleus absorbs a neutron
    • 1 mark for stating that the nucleus becomes unstable and splits into smaller nuclei
    • 1 mark for stating that energy and further neutrons are released
  2. 2.Explain[4 marks]

    Explain how a reactor maintains a steady fission chain reaction.

    Show mark schemeHide mark scheme

    Model answer

    Neutrons from fission can cause further fissions. A moderator slows neutrons to increase their chance of causing fission. Control rods absorb some neutrons. A steady rate requires each fission to cause, on average, one further fission.

    • 1 mark for explaining that released neutrons can cause further fissions
    • 1 mark for stating that the moderator slows neutrons
    • 1 mark for stating that control rods absorb neutrons
    • 1 mark for stating that each fission must cause one further fission on average for a steady rate
  3. 3.Calculate[2 marks]

    Calculate the ratio of 200 MeV per fission to 4 eV per chemical reaction event.

    Show mark schemeHide mark scheme

    Model answer

    200 MeV=200×106 eV200\,\mathrm{MeV}=200\times10^6\,\mathrm{eV}200MeV=200×106eV. The ratio is 200×1064=5.0×107\frac{200\times10^6}{4}=5.0\times10^74200×106​=5.0×107, with no units.

    • 1 mark for converting 200 MeV to 200×106 eV200\times10^6\,\mathrm{eV}200×106eV
    • 1 mark for calculating the unitless ratio as 5.0×1075.0\times10^75.0×107
  4. 4.Compare[2 marks]

    Compare the changes involved in fission and chemical reactions.

    Show mark schemeHide mark scheme

    Model answer

    Fission splits a nucleus, while chemical reactions rearrange electrons and bonds. Fission releases far more energy per event.

    • 1 mark for distinguishing nuclear splitting from the rearrangement of electrons and bonds
    • 1 mark for stating that fission releases far more energy per event
  5. 5.Discuss[4 marks]

    Discuss two hazards associated with fission products after a reactor shuts down.

    Show mark schemeHide mark scheme

    Model answer

    Radioactive fission fragments emit radiation that can damage living tissue. They need shielding and careful storage. The products also release decay heat after the chain reaction stops. Continued cooling prevents overheating and possible damage to the reactor.

    • 1 mark for identifying radiation from radioactive fission fragments as a hazard
    • 1 mark for linking that radiation to shielding or careful storage
    • 1 mark for identifying continued decay heat after shutdown as a hazard
    • 1 mark for linking continued cooling to preventing overheating or reactor damage

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Identify[1 mark]

Which description identifies a fission chain reaction?
Show answer and explanation

Answer: B · Worked explanation

A chain reaction is a sequence in which neutrons released by one fission cause further fissions. Fission fragments do not need to combine, and the reaction is propagated by neutrons rather than by heat or neutrons released from control rods.
3.

Easy·State[1 mark]

State the typical energy released by a single fission event, as described in the notes.
Show answer and explanation

Answer: A · Worked explanation

A typical fission event releases around 200 MeV, a nuclear-scale energy. The value of a few electronvolts, such as 4 eV, is typical of a chemical reaction involving one molecule; it is not the typical energy for fission.
4.

Easy·Identify[1 mark]

Identify a significant hazard associated with radioactive fission fragments after fuel has been used.
Show answer and explanation

Answer: D · Worked explanation

Many fission fragments are unstable and radioactive, and their radiation can damage living tissue. Stopping the chain reaction does not make radioactive products harmless or stop their decay; spent fuel therefore requires shielding and careful storage.
5.

Medium·Determine[2 marks]

In a reactor, each fission releases three neutrons. On average, one causes another fission, one escapes, and one is absorbed without causing fission. Determine the behaviour of the fission rate over successive generations.
Show answer and explanation

Answer: A · Worked explanation

The relevant quantity is the average number of further fissions caused by each fission, not the total number of neutrons released. Here that average is one, so the reaction rate remains steady. The two neutrons that do not cause fission are accounted for by escape or absorption, but neither makes the reaction immediately stop.
6.

Medium·Calculate[2 marks]

A fission event releases 180 MeV, while a chemical reaction event releases 3 eV. Calculate the ratio of the fission energy per event to the chemical energy per event.
Show answer and explanation

Answer: B · Worked explanation

Convert the fission energy to electronvolts: 180 MeV=180×106 eV180\,\text{MeV}=180\times10^6\,\text{eV}180MeV=180×106eV. Dividing by 3 eV3\,\text{eV}3eV gives 60×106=6.0×10760\times10^6=6.0\times10^760×106=6.0×107, with no units. The tempting 6.0×1046.0\times10^46.0×104 result comes from using the wrong conversion factor for MeV to eV.
7.

Medium·Explain[2 marks]

A reactor operator wants to slow neutrons so that they are more likely to cause fission in uranium-235, without absorbing them for that purpose. Which component has this role?
Show answer and explanation

Answer: C · Worked explanation

The moderator slows neutrons, increasing their likelihood of causing fission in uranium-235. Control rods have a different role: they absorb neutrons to regulate the number available for further fissions. Coolant carries heat away, while fission fragments are products of the reaction.
8.

Medium·Explain[2 marks]

A reactor's fission chain reaction has been stopped, but the fuel is still hot and requires cooling. Explain why this can happen.
Show answer and explanation

Answer: B · Worked explanation

Radioactive fission products continue to decay after the chain reaction stops, releasing decay heat. The reaction can therefore no longer be self-sustaining while the fuel still needs cooling. Control rods absorb neutrons rather than emitting them, and decay heat is not the same as continued fission.
9.

Hard·Deduce[2 marks]

A fission event releases two neutrons. In a particular material, on average 60% of released neutrons escape or are absorbed without causing fission. Assume the remainder each cause one further fission. Deduce the average number of further fissions caused by one fission and the resulting trend.
Show answer and explanation

Answer: A · Worked explanation

The fraction that causes further fission is 1−0.60=0.401-0.60=0.401−0.60=0.40. With two neutrons released, the average is 2×0.40=0.82\times0.40=0.82×0.40=0.8 further fissions per fission; because this is below one, the reaction dies away. The tempting value of 1.2 results from using the 60% that do not cause fission as though they did.
10.

Hard·Compare[2 marks]

Two reactor settings have the same number of fissions in the first generation. In setting P, each fission leads to an average of 1.0 further fissions; in setting Q, the average is 1.15. Compare the expected behaviour over later generations.
Show answer and explanation

Answer: A · Worked explanation

A steady reaction requires each fission to lead, on average, to one further fission, so setting P remains steady. In setting Q the average is greater than one, so the number of fissions increases over generations. The fact that both settings release neutrons does not determine the trend; how many neutrons cause further fissions matters.

Keep going

Next topicE.5 Fusion and starsPrevious topicE.3 Radioactive decay

More in Theme E · Nuclear and quantum physics

  1. E.1Structure of the atomNotes · 10 questions
  2. E.2Quantum physicsNotes · 10 questions· HL only
  3. E.3Radioactive decayNotes · 10 questions
  4. E.4FissionNotes · 10 questions
  5. E.5Fusion and starsNotes · 10 questions

All IB Physics topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by IB Diploma Programme or any exam board.

On this page

0/4 read

  1. 1An absorbed neutron can split a heavy nucleus
  2. 2Released neutrons can sustain a chain reaction
  3. 3Fission releases far more energy per event
  4. 4Fission products create radiation and heat hazards
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe