IB Physics · Theme E · Nuclear and quantum physics
E.5 Fusion and stars
Explain how fusion powers stars, trace stellar life cycles, and assess controlled fusion on Earth.
1/6Fusion joins light nuclei under extreme conditions
- Fusion joins light nuclei under extreme conditions
- Core fusion releases energy that supports stars
- Light and parallax reveal stellar properties
- A star’s mass shapes its path across stellar stages
- Fusion and fission differ most clearly in their waste
- Controlled fusion needs sustained heating and confinement
- Check your recall
- Practice: 10 questions
Part 1 of 6: Fusion joins light nuclei under extreme conditions
Nuclear fusion occurs when two light nuclei join to form a heavier nucleus. Both nuclei are positively charged, so they repel each other. They need enough kinetic energy to approach closely enough for the strong nuclear force to bind them. This requires a very high temperature.
Fusion also needs nuclei to collide often enough. High density raises the collision rate. In a star, gravity compresses the core and confines its hot material. On Earth, hot fuel must be confined without allowing it to cool against a container wall. At fusion temperatures, the fuel is a plasma: a mixture of free electrons and ions.
Key terms · tap one for its definition
Nuclear fusion
Nuclear fusion joins light nuclei into a heavier nucleus, with energy released when the products have less mass.
Density
Density is mass per unit volume; greater fuel density generally increases the frequency of nuclear collisions.
Plasma
Plasma is a state of matter containing free charged particles, including ions and electrons.
Part 2 of 6: Core fusion releases energy that supports stars
During a star’s main sequence, hydrogen nuclei fuse through a series of reactions that produce helium. The products have less mass than the starting particles. This mass defect corresponds to released energy, given by . Energy moves outwards through the star and eventually escapes as radiation. Fusion also helps maintain the hot core pressure that opposes inward gravitational compression.
Worked example
Energy released from a mass defect
- Use .
- Substitute: .
- Calculate: .
Answer:
A star’s hydrostatic equilibrium is the balance between inward gravity and outward pressure. As the core’s fuel changes, that balance can change too.
Key terms · tap one for its definition
Main sequence
The main sequence is the stage when a star sustains hydrogen fusion in its core.
Mass defect
Mass defect is the difference between the total mass of starting particles and that of the reaction products.
Hydrostatic equilibrium
Hydrostatic equilibrium is the balance between inward gravity and outward pressure within a star.

Quick check
One question on the part you just read
Easy
Show answer and explanation
Answer: C · Worked explanation
Part 3 of 6: Light and parallax reveal stellar properties
Now that fusion explains a star’s energy, its light can tell us more. Luminosity is the total energy a star emits each second. For a star treated as a black body, . Here is its surface area, is its radius, and is its surface temperature in kelvin. The Stefan–Boltzmann constant is .
Apparent brightness is the energy received each second per square metre. If light spreads equally in all directions, , where is distance in metres. Stellar parallax gives an independent distance estimate. Observe a nearby star six months apart and measure half its apparent angular shift against distant stars. Then , with in parsecs and in arcseconds.
Worked example
Distance from stellar parallax
- Use .
- Substitute : .
Answer: The star is 5.0 pc away.
Key terms · tap one for its definition
Luminosity
Luminosity is a star’s total rate of energy emission, measured in watts.
Apparent brightness
Apparent brightness is the power received per unit area, measured in .
Stellar parallax
Stellar parallax is half a nearby star’s apparent angular shift between observations six months apart.
Part 4 of 6: A star’s mass shapes its path across stellar stages
Distance helps us find luminosity from apparent brightness. An Hertzsprung–Russell diagram plots luminosity against surface temperature. Temperature usually decreases from left to right. Most stars lie along the main sequence. Giants and supergiants sit above it; white dwarfs sit below it.
A star forms as a gas cloud contracts and heats. Hydrogen fusion then begins in its core. Its mass largely determines what follows when core hydrogen runs low.
- A lower-mass star expands into a red giant and begins core helium fusion.
- It sheds its outer layers, leaving a white dwarf without sustained fusion.
- A sufficiently massive star becomes a red supergiant and fuses successively heavier nuclei.
- Its core collapses, producing a supernova and a neutron star or black hole.
Fusion releases energy only up to the formation of iron. Fusion beyond iron cannot support the core against gravity.
Key terms · tap one for its definition
Red giant
A red giant is an expanded, cooler-surfaced star in a late stage after core hydrogen runs low.
White dwarf
A white dwarf is the dense stellar remnant left after a lower-mass star sheds its outer layers.
Red supergiant
A red supergiant is an expanded massive star that can undergo successive stages of core fusion.
Hertzsprung–Russell diagram
A Hertzsprung–Russell diagram plots stellar luminosity against surface temperature, usually with hotter stars on the left.

Quick check
One question on the part you just read
Easy
Show answer and explanation
Answer: B · Worked explanation
Part 5 of 6: Fusion and fission differ most clearly in their waste
Both fusion and fission release energy because their products have less mass than their starting particles. Comparing energy output requires care: the energy per reaction differs from the energy per unit mass of fuel. Fusion of light nuclei can release more energy per unit mass than fission of heavy nuclei.
Comparing nuclear energy processes
- Feature
- Nuclear change
- Fusion
- Light nuclei join
- Fission
- Heavy nucleus splits
- Feature
- Energy per unit mass of fuel
- Fusion
- Potentially higher
- Fission
- Lower
- Feature
- Main waste concern
- Fusion
- Activated materials; some fuel products
- Fission
- Radioactive fission products and spent fuel
Fusion does not produce the same long-lived fission products as fission. However, it is not waste-free. Neutrons from some fusion reactions can make reactor materials radioactive. The waste depends on the fuel and reactor design.
Key term
Fission
Fission splits a heavy nucleus into smaller nuclei, releasing energy when the products have less mass.
Part 6 of 6: Controlled fusion needs sustained heating and confinement
Earth cannot use a star’s gravity to confine fusion fuel. A reactor must heat its fuel, keep it dense enough, and confine it long enough for useful fusion to occur. Magnetic confinement uses magnetic fields to hold charged plasma away from walls. Inertial confinement briefly compresses fuel so fusion occurs before it spreads apart.
Keeping plasma stable is difficult. Energy escapes from it, while particles and radiation can damage surrounding materials. A practical reactor must also recover useful energy and, for common proposed fuels, supply or produce enough tritium. Net energy gain must be stated carefully. Energy released by the fuel differs from electricity delivered after running the whole facility.
Key terms · tap one for its definition
Magnetic confinement
Magnetic confinement uses magnetic fields to restrict the motion of charged plasma particles.
Inertial confinement
Inertial confinement compresses fuel rapidly, allowing fusion before the fuel disperses.
Net energy gain
Net energy gain depends on which energy inputs and outputs are included in the comparison.
Check your recall[17 marks]
6 written questions. Answer each one in your head or on paper, then open the mark scheme.
- 1.Explain[3 marks]
Explain why fusion requires high temperature and sufficient fuel density.
Show mark schemeHide mark scheme
Model answer
Positive nuclei repel each other. High temperature gives them enough kinetic energy to approach closely enough for the strong nuclear force to act. Sufficient density makes collisions frequent enough.
- 1 mark for stating that positively charged nuclei repel each other
- 1 mark for explaining that high temperature increases kinetic energy so nuclei can approach closely
- 1 mark for explaining that sufficient density increases collision frequency
- 2.Calculate[2 marks]
Calculate the energy released by a mass defect of , using .
Show mark schemeHide mark scheme
Model answer
.
- 1 mark for using with the given values
- 1 mark for obtaining
- 3.Explain[2 marks]
Explain how fusion helps a main-sequence star resist gravitational compression.
Show mark schemeHide mark scheme
Model answer
Hydrogen fusion releases energy that keeps the core hot. The resulting pressure acts outwards against inward gravity.
- 1 mark for stating that hydrogen fusion releases energy and maintains a hot core
- 1 mark for explaining that outward pressure opposes inward gravity
- 4.Compare[4 marks]
Compare the later lives of lower-mass and sufficiently massive stars.
Show mark schemeHide mark scheme
Model answer
Both begin with core hydrogen fusion. A lower-mass star becomes a red giant, fuses helium, and ends as a white dwarf. A sufficiently massive star becomes a red supergiant and can fuse elements up to iron. Its core then collapses in a supernova, leaving a neutron star or black hole.
- 1 mark for identifying core hydrogen fusion as a stage in both paths
- 1 mark for describing the lower-mass star’s red giant and helium-fusion stages
- 1 mark for identifying a white dwarf as its final remnant
- 1 mark for describing fusion up to iron, followed by core collapse and a neutron star or black hole, for a sufficiently massive star
- 5.Compare[3 marks]
Compare fusion and fission by energy per unit mass of fuel and radioactive waste.
Show mark schemeHide mark scheme
Model answer
Fusion of light nuclei can release more energy per unit mass of fuel than fission of heavy nuclei. Fission produces radioactive fission products and spent fuel. Fusion avoids those fission products, but neutrons can make reactor materials radioactive.
- 1 mark for stating that fusion can release more energy per unit mass of fuel
- 1 mark for identifying radioactive fission products or spent fuel from fission
- 1 mark for explaining that fusion can still produce radioactive reactor materials
- 6.Discuss[3 marks]
Discuss why controlled fusion on Earth is difficult.
Show mark schemeHide mark scheme
Model answer
Fuel must be heated enough for nuclei to overcome their repulsion, then confined at sufficient density for long enough. Plasma can lose energy or become unstable, and radiation can damage materials. A useful reactor must also recover enough energy to meet the needs of the whole facility.
- 1 mark for identifying the need for very high temperature and adequate density and confinement time
- 1 mark for describing plasma energy loss, instability or material damage
- 1 mark for explaining that useful energy output must account for the whole facility’s needs

Practice this topic
10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)
0 right0 of 10 answered
Includes the 2 quick checks in the note above.
EasyIdentify[1 mark]
Show answer and explanation
Answer: C · Worked explanation
EasyIdentify[1 mark]
Show answer and explanation
Answer: A · Worked explanation
MediumDeduce[2 marks]
Show answer and explanation
Answer: D · Worked explanation
MediumCalculate[2 marks]
Show answer and explanation
Answer: B · Worked explanation
MediumCompare[2 marks]
Show answer and explanation
Answer: C · Worked explanation
MediumDetermine[2 marks]
Show answer and explanation
Answer: C · Worked explanation
MediumExplain[2 marks]
Show answer and explanation
Answer: D · Worked explanation
HardDeduce[2 marks]
Show answer and explanation
Answer: D · Worked explanation