Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Calculus BC
  3. ›8 Applications of Integration
  4. ›8.10 Disc method about other axes

AP Calculus BC · Unit 8 · Applications of Integration

8.10 Disc method about other axes

Find the radius and volume when a region rotates around a shifted horizontal or vertical axis.

  • 3 min read
  • 4 parts
  • 9 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 9 questions
1/4A shifted axis changes the radius, not the disc formula
  1. 1A shifted axis changes the radius, not the disc formula
  2. 2Horizontal axes require vertical distances and vertical slices
  3. 3Vertical axes require horizontal distances and horizontal slices
  4. 4Evaluate the integral after checking the region
  5. Check your recall
  6. Practice: 9 questions
1

Part 1 of 4: A shifted axis changes the radius, not the disc formula

The disc method adds the volumes of thin circular slices. Each slice has area πr2\pi r^2πr2, where rrr is its radius. Rotating around a line other than a coordinate axis does not change this area formula. It changes how you find rrr. The axis of rotation is the line through each disc’s center. Measure the radius perpendicular to that line, from the line to the region’s outer edge. Slices must also be perpendicular to the axis.

Common mistake

Do not use a curve’s coordinate as the radius without checking the axis. The radius is a distance from the axis.

Key terms · tap one for its definition

disc method

The disc method finds a solid’s volume by integrating the areas of circular cross sections perpendicular to its rotation axis.

axis of rotation

The axis of rotation is the fixed line around which a region turns to form a solid.

Part 1 done

2

Part 2 of 4: Horizontal axes require vertical distances and vertical slices

For rotation around y=ky=ky=k, use vertical slices of thickness dxdxdx. If the region lies between y=f(x)y=f(x)y=f(x) and the axis, its radius function is r(x)=∣f(x)−k∣r(x)=|f(x)-k|r(x)=∣f(x)−k∣. The volume is V=π∫ab[f(x)−k]2 dxV=\pi\int_a^b[f(x)-k]^2\,dxV=π∫ab​[f(x)−k]2dx. Squaring makes the absolute value unnecessary in the integral. The bounds aaa and bbb are the left and right ends of the region.

Check that each slice runs from the axis to the curve. Then its rotation makes a solid disc, with no empty center.

Figure 1. A vertical slice reaches from the curve to the axis. Its length becomes the disc radius.

Key term

radius function

A radius function gives the perpendicular distance from the axis of rotation to the region’s outer edge.

Part 2 done

Quick check

One question on the part you just read

Easy

A region is rotated around the horizontal line y=5y=5y=5. Which slices are perpendicular to the axis of rotation?
Show answer and explanation

Answer: A · Worked explanation

The axis y=5y=5y=5 is horizontal, so slices perpendicular to it are vertical. Their thickness is measured in the xxx-direction, giving dxdxdx. Horizontal slices run parallel to this axis, so they would not produce the perpendicular cross sections used in the disc method.
3

Part 3 of 4: Vertical axes require horizontal distances and horizontal slices

For rotation around x=hx=hx=h, use horizontal slices of thickness dydydy. Write the curve as x=g(y)x=g(y)x=g(y). If the region lies between this curve and the axis, its radius is r(y)=∣g(y)−h∣r(y)=|g(y)-h|r(y)=∣g(y)−h∣. The volume integral is V=π∫cd[g(y)−h]2 dyV=\pi\int_c^d[g(y)-h]^2\,dyV=π∫cd​[g(y)−h]2dy. Here, ccc and ddd are the bottom and top of the region.

For example, rotate the region between x=y2x=y^2x=y2 and x=4x=4x=4 for 0≤y≤20\le y\le20≤y≤2 around x=4x=4x=4. The radius is 4−y24-y^24−y2, so the volume is π∫02(4−y2)2 dy\pi\int_0^2(4-y^2)^2\,dyπ∫02​(4−y2)2dy.

Exam tip

Name the slicing variable before writing the radius. Use dydydy with a vertical axis and dxdxdx with a horizontal axis.

Key term

volume integral

A volume integral adds cross-sectional areas over the interval occupied by a solid.

Part 3 done

4

Part 4 of 4: Evaluate the integral after checking the region

First identify the axis and the curve that forms the outer edge. Then find their perpendicular distance at a typical slice. Confirm that the region touches the axis along every slice. If it does not, the slices form rings rather than discs. Finally, square the radius, integrate over the correct bounds, and give volume in cubic units.

Worked example

Rotation around a shifted horizontal axis

Rotate the region bounded by y=x+1y=x+1y=x+1, y=3y=3y=3, and x=0x=0x=0 around y=3y=3y=3. Find its volume.
  1. 1
    Find the right endpoint: x+1=3x+1=3x+1=3, so x=2x=2x=2.
  2. 2
    Measure from the curve to the axis: r(x)=3−(x+1)=2−xr(x)=3-(x+1)=2-xr(x)=3−(x+1)=2−x.
  3. 3
    Set up the volume: V=π∫02(2−x)2 dxV=\pi\int_0^2(2-x)^2\,dxV=π∫02​(2−x)2dx.
  4. 4
    Evaluate: V=π[4x−2x2+x33]02=8π3V=\pi\left[4x-2x^2+\frac{x^3}{3}\right]_0^2=\frac{8\pi}{3}V=π[4x−2x2+3x3​]02​=38π​.

Answer: The volume is 8π3\frac{8\pi}{3}38π​ cubic units.

Note read

Check your recall[12 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[1 mark]

    State the direction of slices for rotation around a horizontal line.

    Show mark schemeHide mark scheme

    Model answer

    Use vertical slices perpendicular to the horizontal axis.

    • 1 mark for stating that the slices are vertical
  2. 2.Explain[2 marks]

    Explain why f(x)f(x)f(x) alone may not be the disc radius when rotating around y=ky=ky=k.

    Show mark schemeHide mark scheme

    Model answer

    The radius is measured from the rotation axis, not necessarily from the x-axis. It is the distance ∣f(x)−k∣|f(x)-k|∣f(x)−k∣.

    • 1 mark for stating that the radius is measured from the rotation axis
    • 1 mark for giving the distance ∣f(x)−k∣|f(x)-k|∣f(x)−k∣
  3. 3.Construct[3 marks]

    Construct the volume integral for the region between x=y2x=y^2x=y2 and x=4x=4x=4, for 0≤y≤20\le y\le20≤y≤2, rotated around x=4x=4x=4.

    Show mark schemeHide mark scheme

    Model answer

    Using horizontal slices, the radius is 4−y24-y^24−y2. Thus V=π∫02(4−y2)2 dyV=\pi\int_0^2(4-y^2)^2\,dyV=π∫02​(4−y2)2dy.

    • 1 mark for using horizontal slices or integrating with respect to yyy
    • 1 mark for identifying the radius as 4−y24-y^24−y2
    • 1 mark for writing π∫02(4−y2)2 dy\pi\int_0^2(4-y^2)^2\,dyπ∫02​(4−y2)2dy
  4. 4.Calculate[4 marks]

    Calculate the volume when the region between y=x+1y=x+1y=x+1 and y=3y=3y=3, for 0≤x≤20\le x\le20≤x≤2, rotates around y=3y=3y=3.

    Show mark schemeHide mark scheme

    Model answer

    The radius is 3−(x+1)=2−x3-(x+1)=2-x3−(x+1)=2−x. Therefore V=π∫02(2−x)2 dx=π[4x−2x2+x3/3]02=8π/3V=\pi\int_0^2(2-x)^2\,dx=\pi[4x-2x^2+x^3/3]_0^2=8\pi/3V=π∫02​(2−x)2dx=π[4x−2x2+x3/3]02​=8π/3 cubic units.

    • 1 mark for finding the radius 2−x2-x2−x
    • 1 mark for setting up π∫02(2−x)2 dx\pi\int_0^2(2-x)^2\,dxπ∫02​(2−x)2dx
    • 1 mark for integrating to obtain 4x−2x2+x3/34x-2x^2+x^3/34x−2x2+x3/3
    • 1 mark for giving 8π/38\pi/38π/3 cubic units
  5. 5.Explain[2 marks]

    Explain when rotating a region around a shifted axis produces discs rather than rings.

    Show mark schemeHide mark scheme

    Model answer

    Each slice must reach the axis of rotation. Its rotation then fills the circular cross section without an empty center.

    • 1 mark for stating that each slice must reach the axis
    • 1 mark for explaining that the resulting cross section has no empty center

Practice this topic

9 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 9 answered

Includes the quick check in the note above.

2.

Easy·Identify[1 mark]

A region below y=6y=6y=6 and above y=f(x)y=f(x)y=f(x) is rotated around y=6y=6y=6. Which expression gives the radius of a disc at position xxx?
Show answer and explanation

Answer: C · Worked explanation

The radius is the vertical distance from the axis y=6y=6y=6 to the curve y=f(x)y=f(x)y=f(x), which is 6−f(x)6-f(x)6−f(x) because the curve is below the axis. The expression f(x)f(x)f(x) is the curve's height above the xxx-axis, not its distance from the rotation axis.
3.

Easy·State[1 mark]

When a region is rotated around the vertical line x=2x=2x=2, which variable is used to describe the thickness of slices perpendicular to the axis?
Show answer and explanation

Answer: A · Worked explanation

A vertical axis requires horizontal slices, and the thickness of a horizontal slice is measured in the yyy-direction as dydydy. Using dxdxdx would describe vertical slices, which are parallel to the axis rather than perpendicular to it.
4.

Easy·Determine[1 mark]

The curve x=g(y)x=g(y)x=g(y) lies to the left of the vertical axis x=7x=7x=7. What is the radius from this curve to the axis?
Show answer and explanation

Answer: A · Worked explanation

The radius is the horizontal distance between the curve and the axis. Since the curve lies to the left of x=7x=7x=7, that distance is 7−g(y)7-g(y)7−g(y). The quantity g(y)−7g(y)-7g(y)−7 is negative in this setting, so it does not represent the radius as written.
5.

Medium·Calculate[1 mark]

A region lies between y=x2+1y=x^2+1y=x2+1 and the horizontal axis y=−2y=-2y=−2. What is the disc radius at x=1x=1x=1 when the region is rotated around y=−2y=-2y=−2?
Show answer and explanation

Answer: B · Worked explanation

At x=1x=1x=1, the curve has height y=12+1=2y=1^2+1=2y=12+1=2. Its vertical distance from the axis y=−2y=-2y=−2 is 2−(−2)=42-(-2)=42−(−2)=4, so the radius is 4. Using the curve value 2 alone would measure from the xxx-axis, not from the rotation axis.
6.

Medium·Determine[2 marks]

The region between x=y2x=y^2x=y2 and x=4x=4x=4 for 1≤y≤21\le y\le 21≤y≤2 is rotated around x=4x=4x=4. What is the volume?
Show answer and explanation

Answer: B · Worked explanation

The radius is 4−y24-y^24−y2, so V=π∫12(4−y2)2 dy=π[16y−83y3+y55]12=53π15V=\pi\int_1^2(4-y^2)^2\,dy=\pi[16y-\frac{8}{3}y^3+\frac{y^5}{5}]_1^2=\frac{53\pi}{15}V=π∫12​(4−y2)2dy=π[16y−38​y3+5y5​]12​=1553π​ cubic units.
7.

Hard·Explain[2 marks]

A student rotates the region between y=x2y=x^2y=x2 and y=4y=4y=4, for 0≤x≤20\le x\le 20≤x≤2, around y=4y=4y=4. The student proposes π∫02(4−x2)2 dy\pi\int_0^2(4-x^2)^2\,dyπ∫02​(4−x2)2dy. Explain the error and give the correctly oriented integral.
Show answer and explanation

Answer: B · Worked explanation

The axis y=4y=4y=4 is horizontal, so the perpendicular slices are vertical and the integration variable is xxx. The distance from the curve to the axis is 4−x24-x^24−x2, giving V=π∫02(4−x2)2 dxV=\pi\int_0^2(4-x^2)^2\,dxV=π∫02​(4−x2)2dx. The proposed radius is right, but dydydy is inconsistent with these vertical slices.
8.

Hard·Calculate[2 marks]

The region between y=x2y=x^2y=x2 and y=4y=4y=4 for 0≤x≤20\le x\le 20≤x≤2 is rotated around y=4y=4y=4. Determine the volume.
Show answer and explanation

Answer: C · Worked explanation

The radius is 4−x24-x^24−x2, so V=π∫02(4−x2)2 dx=π[16x−83x3+x55]02V=\pi\int_0^2(4-x^2)^2\,dx=\pi[16x-\frac{8}{3}x^3+\frac{x^5}{5}]_0^2V=π∫02​(4−x2)2dx=π[16x−38​x3+5x5​]02​. Substitution gives 32−64/3+32/5=256/1532-64/3+32/5=256/1532−64/3+32/5=256/15, so the volume is 256π/15256\pi/15256π/15 cubic units. Using x2x^2x2 as the radius would incorrectly measure from the xxx-axis.
9.

Hard·Deduce[2 marks]

A region is bounded by x=y2+1x=y^2+1x=y2+1, x=5x=5x=5, and 0≤y≤20\le y\le 20≤y≤2. It is rotated around x=5x=5x=5. Which volume integral and value are correct?
Show answer and explanation

Answer: A · Worked explanation

Each horizontal slice reaches the axis x=5x=5x=5. Its radius is 5−(y2+1)=4−y25-(y^2+1)=4-y^25−(y2+1)=4−y2, so V=π∫02(4−y2)2 dy=256π15V=\pi\int_0^2(4-y^2)^2\,dy=\frac{256\pi}{15}V=π∫02​(4−y2)2dy=15256π​.

Keep going

Next topic8.11 Washer method about the x- or y-axisPrevious topic8.9 Disc method about the x- or y-axis

More in Unit 8 · Applications of Integration

  1. 8.5Area between curves (functions of y)Notes · 9 questions
  2. 8.6Area between curves with several intersectionsNotes · 10 questions
  3. 8.7Volumes: square and rectangle cross sectionsNotes · 10 questions
  4. 8.8Volumes: triangle and semicircle cross sectionsNotes · 10 questions
  5. 8.9Disc method about the x- or y-axisNotes · 10 questions
  6. 8.10Disc method about other axesNotes · 9 questions
  7. 8.11Washer method about the x- or y-axisNotes · 10 questions
  8. 8.12Washer method about other axesNotes · 9 questions
  9. 8.13Arc lengthNotes · 10 questions· BC only

All AP Calculus BC topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1A shifted axis changes the radius, not the disc formula
  2. 2Horizontal axes require vertical distances and vertical slices
  3. 3Vertical axes require horizontal distances and horizontal slices
  4. 4Evaluate the integral after checking the region
  5. Check your recall
  6. Practice: 9 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe