Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Calculus BC
  3. ›8 Applications of Integration
  4. ›8.11 Washer method about the x- or y-axis

AP Calculus BC · Unit 8 · Applications of Integration

8.11 Washer method about the x- or y-axis

Set up washer integrals about either coordinate axis and calculate volumes from their outer and inner radii.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4A washer forms when the region misses the axis
  1. 1A washer forms when the region misses the axis
  2. 2Rotating about the x-axis uses vertical slices
  3. 3Rotating about the y-axis uses horizontal slices
  4. 4Integrating washer areas gives the solid’s volume
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: A washer forms when the region misses the axis

Revolving a region around an axis can produce a solid with a hole. A thin slice perpendicular to the axis then sweeps out a washer. Its outer radius reaches the farther edge of the region. Its inner radius reaches the nearer edge. Both radii are distances from the axis, so neither can be negative.

Subtract the inner circle’s area from the outer circle’s area. The washer area is π(R2−r2)\pi(R^2-r^2)π(R2−r2), where RRR and rrr are the outer and inner radii. Adding these areas across the region gives its volume.

Common mistake

Do not square R−rR-rR−r. Subtract the squared radii: R2−r2R^2-r^2R2−r2.

Key terms · tap one for its definition

washer

A washer is a circular cross section with a circular hole, formed by revolving a slice around an axis.

outer radius

The outer radius is the distance from the axis of rotation to the farther edge of a slice.

inner radius

The inner radius is the distance from the axis of rotation to the nearer edge of a slice.

Part 1 done

2

Part 2 of 4: Rotating about the x-axis uses vertical slices

For rotation about the x-axis, take a vertical slice at each xxx. Write the upper and lower boundaries as functions of xxx. If both lie above the x-axis, the upper function gives R(x)R(x)R(x). The lower function gives r(x)r(x)r(x). Integrate with respect to xxx between the region’s left and right endpoints.

For example, consider the region between y=xy=xy=x and y=x2y=x^2y=x2 from x=0x=0x=0 to x=1x=1x=1. On this interval, x≥x2≥0x\geq x^2\geq0x≥x2≥0. Thus R(x)=xR(x)=xR(x)=x and r(x)=x2r(x)=x^2r(x)=x2. The volume setup is V=π∫01(x2−x4) dxV=\pi\int_0^1\bigl(x^2-x^4\bigr)\,dxV=π∫01​(x2−x4)dx.

Figure 1. At a fixed xxx, each radius is measured from the x-axis to a boundary of the region.

Key term

vertical slice

A vertical slice holds xxx fixed and is perpendicular to the x-axis.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the cross section formed when a slice of a region that does not touch the axis of rotation is revolved around that axis.
Show answer and explanation

Answer: B · Worked explanation

The slice sweeps out a circular cross section with a hole because the region does not reach the axis of rotation. A disk has no hole and would result when the slice reaches the axis.
3

Part 3 of 4: Rotating about the y-axis uses horizontal slices

For rotation about the y-axis, take a horizontal slice at each yyy. Rewrite the boundaries as xxx in terms of yyy. If both lie to the right of the y-axis, the right boundary gives R(y)R(y)R(y). The left boundary gives r(y)r(y)r(y). Integrate with respect to yyy between the bottom and top endpoints.

The same region has boundaries x=yx=\sqrt yx=y​ and x=yx=yx=y for 0≤y≤10\leq y\leq10≤y≤1. Since y≥y\sqrt y\geq yy​≥y, its radii are R(y)=yR(y)=\sqrt yR(y)=y​ and r(y)=yr(y)=yr(y)=y. Its volume about the y-axis is V=π∫01(y−y2) dy=π6V=\pi\int_0^1(y-y^2)\,dy=\frac{\pi}{6}V=π∫01​(y−y2)dy=6π​ cubic units.

Exam tip

Name the slice direction and variable before choosing radii. This keeps each radius paired with the correct axis.

Key term

horizontal slice

A horizontal slice holds yyy fixed and is perpendicular to the y-axis.

Part 3 done

4

Part 4 of 4: Integrating washer areas gives the solid’s volume

A washer integral adds the areas of thin washers across the region. With endpoints aaa and bbb measured along the axis, use V=π∫ab(R2−r2) dxV=\pi\int_a^b\bigl(R^2-r^2\bigr)\,d xV=π∫ab​(R2−r2)dx for rotation about the x-axis. Use dyd ydy and vertical endpoints for rotation about the y-axis. The radius functions must use the same variable as the integral.

Worked example

Volume about the x-axis

Find the volume formed by rotating the region between y=xy=xy=x and y=x2y=x^2y=x2, from x=0x=0x=0 to x=1x=1x=1, about the x-axis.
  1. 1
    Identify the radii: R(x)=xR(x)=xR(x)=x and r(x)=x2r(x)=x^2r(x)=x2.
  2. 2
    Set up the integral: V=π∫01(x2−x4) dxV=\pi\int_0^1\bigl(x^2-x^4\bigr)\,dxV=π∫01​(x2−x4)dx.
  3. 3
    Integrate: V=π[x33−x55]01V=\pi\left[\frac{x^3}{3}-\frac{x^5}{5}\right]_0^1V=π[3x3​−5x5​]01​.
  4. 4
    Evaluate: V=π(13−15)=2π15V=\pi\left(\frac13-\frac15\right)=\frac{2\pi}{15}V=π(31​−51​)=152π​.

Answer: 2π15\frac{2\pi}{15}152π​ cubic units.

Key term

washer integral

A washer integral calculates volume by integrating π(R2−r2)\pi(R^2-r^2)π(R2−r2) along the axis of rotation.

Note read

Check your recall[15 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Explain[2 marks]

    Explain why washer area uses the difference of squared radii.

    Show mark schemeHide mark scheme

    Model answer

    A washer is an outer circle with an inner circle removed. Subtracting their areas gives πR2−πr2=π(R2−r2)\pi R^2-\pi r^2=\pi(R^2-r^2)πR2−πr2=π(R2−r2).

    • 1 mark for recognizing that the inner circular area is removed from the outer circular area
    • 1 mark for giving the area as π(R2−r2)\pi(R^2-r^2)π(R2−r2)
  2. 2.Identify[2 marks]

    Identify the radii for rotating the region between y=xy=xy=x and y=x2y=x^2y=x2, for 0≤x≤10\leq x\leq10≤x≤1, about the x-axis.

    Show mark schemeHide mark scheme

    Model answer

    The outer radius is R(x)=xR(x)=xR(x)=x, and the inner radius is r(x)=x2r(x)=x^2r(x)=x2.

    • 1 mark for identifying R(x)=xR(x)=xR(x)=x
    • 1 mark for identifying r(x)=x2r(x)=x^2r(x)=x2
  3. 3.Calculate[4 marks]

    Calculate the volume formed by rotating that region about the x-axis.

    Show mark schemeHide mark scheme

    Model answer

    V=π∫01(x2−x4) dx=π[x33−x55]01=2π15V=\pi\int_0^1(x^2-x^4)\,dx=\pi\left[\frac{x^3}{3}-\frac{x^5}{5}\right]_0^1=\frac{2\pi}{15}V=π∫01​(x2−x4)dx=π[3x3​−5x5​]01​=152π​ cubic units.

    • 1 mark for using x2−x4x^2-x^4x2−x4 as the difference of squared radii
    • 1 mark for integrating from x=0x=0x=0 to x=1x=1x=1 with a factor of π\piπ
    • 1 mark for finding the antiderivative x33−x55\frac{x^3}{3}-\frac{x^5}{5}3x3​−5x5​
    • 1 mark for obtaining 2π15\frac{2\pi}{15}152π​ cubic units
  4. 4.Explain[3 marks]

    Explain how to choose slices and radii when rotating a region to the right of the y-axis about that axis.

    Show mark schemeHide mark scheme

    Model answer

    Use horizontal slices and integrate with respect to yyy. The right boundary gives the outer radius, and the left boundary gives the inner radius.

    • 1 mark for choosing horizontal slices
    • 1 mark for integrating with respect to yyy
    • 1 mark for assigning the right boundary to the outer radius and the left boundary to the inner radius
  5. 5.Calculate[4 marks]

    Calculate the volume formed by rotating the same region about the y-axis.

    Show mark schemeHide mark scheme

    Model answer

    Here R(y)=yR(y)=\sqrt yR(y)=y​ and r(y)=yr(y)=yr(y)=y. Therefore, V=π∫01(y−y2) dy=π[y22−y33]01=π6V=\pi\int_0^1(y-y^2)\,dy=\pi\left[\frac{y^2}{2}-\frac{y^3}{3}\right]_0^1=\frac{\pi}{6}V=π∫01​(y−y2)dy=π[2y2​−3y3​]01​=6π​ cubic units.

    • 1 mark for identifying R(y)=yR(y)=\sqrt yR(y)=y​ and r(y)=yr(y)=yr(y)=y
    • 1 mark for setting up π∫01(y−y2) dy\pi\int_0^1(y-y^2)\,dyπ∫01​(y−y2)dy
    • 1 mark for finding the antiderivative y22−y33\frac{y^2}{2}-\frac{y^3}{3}2y2​−3y3​
    • 1 mark for obtaining π6\frac{\pi}{6}6π​ cubic units

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Identify[1 mark]

A region lies between y=5y=5y=5 and y=2+xy=2+xy=2+x for 0≤x≤10\leq x\leq10≤x≤1. When it is revolved about the x-axis, identify the outer and inner radii of a vertical slice.
Show answer and explanation

Answer: D · Worked explanation

Both boundaries are above the x-axis, and 5 is farther from the axis than 2+x2+x2+x on the interval. Thus the outer radius is 5 and the inner radius is 2+x2+x2+x. The tempting reversal assigns the nearer boundary as the outer radius, contrary to the distance-based definitions.
3.

Easy·Identify[1 mark]

A region to the right of the y-axis has horizontal boundaries x=4x=4x=4 and x=1+yx=1+yx=1+y for 0≤y≤10\leq y\leq10≤y≤1. When the region is revolved about the y-axis, which radii describe a horizontal slice?
Show answer and explanation

Answer: D · Worked explanation

For rotation about the y-axis, a horizontal slice measures radii horizontally from that axis. Since 4 is the right boundary and farther from the axis than 1+y1+y1+y, the radii are R(y)=4R(y)=4R(y)=4 and r(y)=1+yr(y)=1+yr(y)=1+y. Reversing them would make the outer radius smaller than the inner radius.
4.

Easy·Identify[1 mark]

Which expression gives the area of a washer with outer radius RRR and inner radius rrr?
Show answer and explanation

Answer: D · Worked explanation

The washer area is the outer circle's area minus the inner circle's area, giving πR2−πr2=π(R2−r2)\pi R^2-\pi r^2=\pi(R^2-r^2)πR2−πr2=π(R2−r2). The tempting expression π(R−r)2\pi(R-r)^2π(R−r)2 squares the difference of the radii, which is not the area left after removing the inner circle.
5.

Medium·Set up[2 marks]

The region between y=4y=4y=4 and y=1+xy=1+xy=1+x for 0≤x≤20\leq x\leq20≤x≤2 is revolved about the x-axis. Set up a washer integral for its volume.
Show answer and explanation

Answer: C · Worked explanation

Vertical slices are perpendicular to the x-axis, so integrate with respect to xxx. The outer radius is 4 and the inner radius is 1+x1+x1+x, giving π∫02(42−(1+x)2) dx\pi\int_0^2(4^2-(1+x)^2)\,dxπ∫02​(42−(1+x)2)dx. Squaring the difference of the radii does not subtract the inner circular area correctly.
6.

Medium·Calculate[2 marks]

A region has outer radius 3 and inner radius 1+x1+x1+x when revolved about the x-axis, for 0≤x≤10\leq x\leq10≤x≤1. Calculate the volume.
Show answer and explanation

Answer: B · Worked explanation

The volume is π∫01(9−(1+x)2) dx=π∫01(8−2x−x2) dx\pi\int_0^1(9-(1+x)^2)\,dx=\pi\int_0^1(8-2x-x^2)\,dxπ∫01​(9−(1+x)2)dx=π∫01​(8−2x−x2)dx. Evaluating gives π[8x−x2−x3/3]01=20π3\pi[8x-x^2-x^3/3]_0^1=\frac{20\pi}{3}π[8x−x2−x3/3]01​=320π​ cubic units.
7.

Medium·Set up[2 marks]

A region lies between x=2x=2x=2 and x=5−yx=5-yx=5−y for 0≤y≤20\leq y\leq20≤y≤2. It is revolved about the y-axis. Which integral gives the volume?
Show answer and explanation

Answer: C · Worked explanation

Horizontal slices are perpendicular to the y-axis, so the integral uses dydydy. The right boundary x=5−yx=5-yx=5−y is farther from the axis and gives the outer radius; the left boundary x=2x=2x=2 gives the inner radius. The washer area is therefore π((5−y)2−22)\pi((5-y)^2-2^2)π((5−y)2−22).
8.

Medium·Calculate[2 marks]

A solid is formed by revolving a region about the y-axis. At height yyy, its outer radius is 3−y3-y3−y and its inner radius is 1, for 0≤y≤10\leq y\leq10≤y≤1. Calculate its volume.
Show answer and explanation

Answer: B · Worked explanation

Use V=π∫01((3−y)2−12) dy=π∫01(8−6y+y2) dyV=\pi\int_0^1((3-y)^2-1^2)\,dy=\pi\int_0^1(8-6y+y^2)\,dyV=π∫01​((3−y)2−12)dy=π∫01​(8−6y+y2)dy. Evaluating gives π(8−3+1/3)=16π3\pi(8-3+1/3)=\frac{16\pi}{3}π(8−3+1/3)=316π​ cubic units.
9.

Hard·Determine[2 marks]

For 0≤y≤40\leq y\leq40≤y≤4, a region lies between x=yx=\sqrt{y}x=y​ and x=y2x=\frac{y}{2}x=2y​. It is revolved about the y-axis. Determine the outer and inner radii throughout this interval.
Show answer and explanation

Answer: B · Worked explanation

For 0≤y≤40\leq y\leq40≤y≤4, y≥y/2\sqrt y\geq y/2y​≥y/2, as squaring the nonnegative sides gives y≥y2/4y\geq y^2/4y≥y2/4. Both boundaries are to the right of the y-axis, so the farther one, y\sqrt yy​, is the outer radius. The tempting reversed radii confuse which boundary is farther from the axis.
10.

Hard·Calculate[2 marks]

A region between y=4y=4y=4 and y=2+xy=2+xy=2+x for 0≤x≤20\leq x\leq20≤x≤2 is revolved about the x-axis. Calculate the volume of the resulting solid.
Show answer and explanation

Answer: D · Worked explanation

The radii are R=4R=4R=4 and r=2+xr=2+xr=2+x, so V=π∫02(16−(2+x)2) dx=π[16x−(2+x)3/3]02=40π3V=\pi\int_0^2(16-(2+x)^2)\,dx=\pi[16x-(2+x)^3/3]_0^2=\frac{40\pi}{3}V=π∫02​(16−(2+x)2)dx=π[16x−(2+x)3/3]02​=340π​ cubic units.

Keep going

Next topic8.12 Washer method about other axesPrevious topic8.10 Disc method about other axes

More in Unit 8 · Applications of Integration

  1. 8.5Area between curves (functions of y)Notes · 9 questions
  2. 8.6Area between curves with several intersectionsNotes · 10 questions
  3. 8.7Volumes: square and rectangle cross sectionsNotes · 10 questions
  4. 8.8Volumes: triangle and semicircle cross sectionsNotes · 10 questions
  5. 8.9Disc method about the x- or y-axisNotes · 10 questions
  6. 8.10Disc method about other axesNotes · 9 questions
  7. 8.11Washer method about the x- or y-axisNotes · 10 questions
  8. 8.12Washer method about other axesNotes · 9 questions
  9. 8.13Arc lengthNotes · 10 questions· BC only

All AP Calculus BC topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1A washer forms when the region misses the axis
  2. 2Rotating about the x-axis uses vertical slices
  3. 3Rotating about the y-axis uses horizontal slices
  4. 4Integrating washer areas gives the solid’s volume
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe