Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Calculus BC
  3. ›8 Applications of Integration
  4. ›8.7 Volumes: square and rectangle cross sections

AP Calculus BC · Unit 8 · Applications of Integration

8.7 Volumes: square and rectangle cross sections

Describe, set up, and evaluate volume integrals for square and rectangular cross sections perpendicular to the x-axis.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Perpendicular slices turn volume into an integral
  1. 1Perpendicular slices turn volume into an integral
  2. 2The base region determines each slice width
  3. 3Squares use the base width as their side
  4. 4Rectangles need a second stated dimension
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Perpendicular slices turn volume into an integral

A solid can have a known cross-sectional shape at every x-value. A cross section perpendicular to the x-axis is a slice made at a fixed x-value. If its area is A(x)A(x)A(x), a thin slice has approximate volume A(x)ΔxA(x)\Delta xA(x)Δx. Adding the slices and making them thinner gives the exact volume.

For slices from x=ax=ax=a to x=bx=bx=b, the volume integral is V=∫abA(x) dxV=\int_a^b A(x)\,dxV=∫ab​A(x)dx. Find the area of one slice before integrating. Its dimensions may change with x, so its area usually changes too.

Exam tip

State the cross-sectional area before writing the volume integral. This makes the choice of dimensions clear.

Key terms · tap one for its definition

cross section perpendicular to the x-axis

A cross section perpendicular to the x-axis is the shape formed by slicing a solid at a fixed x-value.

volume integral

A volume integral adds cross-sectional areas along an interval: V=∫abA(x) dxV=\int_a^b A(x)\,dxV=∫ab​A(x)dx.

Part 1 done

2

Part 2 of 4: The base region determines each slice width

The solid's base often lies between two curves, y=f(x)y=f(x)y=f(x) and y=g(x)y=g(x)y=g(x). At a fixed x-value, the vertical distance between them forms one dimension of the cross section. When f(x)≥g(x)f(x)\geq g(x)f(x)≥g(x), this distance is b(x)=f(x)−g(x)b(x)=f(x)-g(x)b(x)=f(x)−g(x). Use the x-values bounding the base region as the limits of integration.

Check which curve is higher throughout the interval. If the curves switch order, split the integral where they intersect. Each piece then uses upper curve minus lower curve. The area A(x)A(x)A(x) must never be negative.

Figure 1. At a fixed x-value, the vertical segment between the curves becomes one side of the square.

Common mistake

Subtracting lower curve minus upper curve gives a negative width. Reverse the order, or split the interval if the curves cross.

Key term

vertical distance

Vertical distance between two curves at a fixed x-value is the upper y-value minus the lower y-value.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the quantity that must be integrated with respect to xxx to find the volume of a solid whose cross sections perpendicular to the xxx-axis have area A(x)A(x)A(x).
Show answer and explanation

Answer: B · Worked explanation

Each thin slice has approximate volume equal to its cross-sectional area multiplied by its thickness, so the volume is found by integrating A(x)A(x)A(x) over the interval. The square root of the area does not represent the slice volume; it may describe a length in some special cross sections, but it is not what is accumulated.
3

Part 3 of 4: Squares use the base width as their side

For a square cross section, the segment in the base region is its side length. If that segment has length b(x)b(x)b(x), its area is A(x)=[b(x)]2A(x)=[b(x)]^2A(x)=[b(x)]2. Therefore, V=∫ab[b(x)]2 dxV=\int_a^b[b(x)]^2\,dxV=∫ab​[b(x)]2dx. Square the entire difference between the curves, not each curve separately.

Worked example

Volume with square cross sections

The base lies between y=xy=xy=x and y=x2y=x^2y=x2 for 0≤x≤10\leq x\leq10≤x≤1. Cross sections perpendicular to the x-axis are squares. Find the volume.
  1. 1
    On this interval, x≥x2x\geq x^2x≥x2, so b(x)=x−x2b(x)=x-x^2b(x)=x−x2.
  2. 2
    Square the side length: A(x)=(x−x2)2=x2−2x3+x4A(x)=(x-x^2)^2=x^2-2x^3+x^4A(x)=(x−x2)2=x2−2x3+x4.
  3. 3
    Integrate: V=∫01(x2−2x3+x4) dxV=\int_0^1(x^2-2x^3+x^4)\,dxV=∫01​(x2−2x3+x4)dx.
  4. 4
    Evaluate: V=[x33−x42+x55]01=130V=\left[\frac{x^3}{3}-\frac{x^4}{2}+\frac{x^5}{5}\right]_0^1=\frac{1}{30}V=[3x3​−2x4​+5x5​]01​=301​.

Answer: The volume is 130\frac{1}{30}301​ cubic units.

Key term

side length

The side length of a square cross section is the length of its segment in the base region.

Part 3 done

4

Part 4 of 4: Rectangles need a second stated dimension

For rectangular cross sections, the base-region segment gives the rectangle base b(x)b(x)b(x). The problem must also give the rectangle height h(x)h(x)h(x), or a rule for finding it. Each area is A(x)=b(x)h(x)A(x)=b(x)h(x)A(x)=b(x)h(x), so V=∫abb(x)h(x) dxV=\int_a^b b(x)h(x)\,dxV=∫ab​b(x)h(x)dx.

For example, suppose each height is twice its base. Then h(x)=2b(x)h(x)=2b(x)h(x)=2b(x) and A(x)=2[b(x)]2A(x)=2[b(x)]^2A(x)=2[b(x)]2. For the region between y=xy=xy=x and y=x2y=x^2y=x2 on [0,1][0,1][0,1], the volume is 2∫01(x−x2)2 dx=1152\int_0^1(x-x^2)^2\,dx=\frac{1}{15}2∫01​(x−x2)2dx=151​ cubic units. Do not assume a rectangle is a square unless its dimensions are equal.

Exam tip

Include cubic units for volume when the coordinate axes have length units.

Key terms · tap one for its definition

rectangle base

The rectangle base is the length of its segment in the base region.

rectangle height

The rectangle height is the other dimension needed to calculate a rectangular cross section's area.

Note read

Check your recall[15 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Describe[3 marks]

    Describe how cross sections perpendicular to the x-axis give a volume integral.

    Show mark schemeHide mark scheme

    Model answer

    Find the area A(x)A(x)A(x) of a slice at each x-value. A thin slice has approximate volume A(x)ΔxA(x)\Delta xA(x)Δx. Integrating these areas from aaa to bbb gives V=∫abA(x) dxV=\int_a^b A(x)\,dxV=∫ab​A(x)dx.

    • 1 mark for finding cross-sectional area as a function of x
    • 1 mark for relating slice volume to area times thickness
    • 1 mark for integrating the area over the x-interval
  2. 2.Explain[2 marks]

    Explain how to find the side length of a square cross section when f(x)f(x)f(x) is above g(x)g(x)g(x).

    Show mark schemeHide mark scheme

    Model answer

    The side is the vertical segment between the curves. Its length is f(x)−g(x)f(x)-g(x)f(x)−g(x).

    • 1 mark for identifying the vertical segment in the base region as the side
    • 1 mark for subtracting the lower function from the upper function
  3. 3.Calculate[4 marks]

    Calculate the volume when the base lies between y=xy=xy=x and y=x2y=x^2y=x2 on [0,1][0,1][0,1], with square cross sections perpendicular to the x-axis.

    Show mark schemeHide mark scheme

    Model answer

    The side is x−x2x-x^2x−x2, so V=∫01(x−x2)2 dx=[x33−x42+x55]01=130V=\int_0^1(x-x^2)^2\,dx=\left[\frac{x^3}{3}-\frac{x^4}{2}+\frac{x^5}{5}\right]_0^1=\frac{1}{30}V=∫01​(x−x2)2dx=[3x3​−2x4​+5x5​]01​=301​ cubic units.

    • 1 mark for finding the side length x−x2x-x^2x−x2
    • 1 mark for squaring the side length to find cross-sectional area
    • 1 mark for integrating that area from 0 to 1
    • 1 mark for obtaining 130\frac{1}{30}301​ cubic units
  4. 4.Calculate[4 marks]

    Calculate the volume for the same base region when each rectangular cross section has height twice its base.

    Show mark schemeHide mark scheme

    Model answer

    The base is x−x2x-x^2x−x2 and the height is 2(x−x2)2(x-x^2)2(x−x2). Thus V=∫012(x−x2)2 dx=115V=\int_0^1 2(x-x^2)^2\,dx=\frac{1}{15}V=∫01​2(x−x2)2dx=151​ cubic units.

    • 1 mark for finding the rectangle base x−x2x-x^2x−x2
    • 1 mark for finding the rectangle height 2(x−x2)2(x-x^2)2(x−x2)
    • 1 mark for setting up the integral of base times height from 0 to 1
    • 1 mark for obtaining 115\frac{1}{15}151​ cubic units
  5. 5.Explain[2 marks]

    Explain what must change in the setup if the two bounding curves switch order within the interval.

    Show mark schemeHide mark scheme

    Model answer

    Split the integral at the intersection where their order changes. On each interval, subtract the lower curve from the upper curve to get a nonnegative width.

    • 1 mark for splitting the integral where the curves switch order
    • 1 mark for using upper minus lower on each resulting interval

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·State[1 mark]

A base region extends from x=2x=2x=2 to x=5x=5x=5, and the cross-sectional area at each xxx is A(x)A(x)A(x). State the volume integral for this solid.
Show answer and explanation

Answer: D · Worked explanation

The volume is the integral of cross-sectional area over the interval in the direction of slicing, so the setup is ∫25A(x) dx\int_2^5 A(x)\,dx∫25​A(x)dx. Integrating the derivative would give only a change in area, not the accumulated slice volume, and multiplying by xxx is not part of the volume formula.
3.

Easy·Identify[1 mark]

At a fixed xxx, a base region runs vertically from y=1y=1y=1 to y=4y=4y=4. The cross section is a square whose side is the segment in the base region. Identify its area.
Show answer and explanation

Answer: C · Worked explanation

The segment length is the vertical distance 4−1=34-1=34−1=3, and that distance is the square's side length. Its area is therefore 32=93^2=932=9 square units. The value 3 is the side length, while 16 incorrectly squares the upper endpoint without accounting for the lower endpoint.
4.

Easy·Identify[1 mark]

A rectangular cross section has base length b(x)b(x)b(x) and height h(x)h(x)h(x). Which expression gives its area?
Show answer and explanation

Answer: D · Worked explanation

The area of a rectangle is the product of its base and height, so the cross-sectional area is b(x)h(x)b(x)h(x)b(x)h(x). Squaring the base would assume the cross section is a square, which is not justified when a separate rectangle height is given.
5.

Medium·Set up[2 marks]

A base region is bounded by y=2x+1y=2x+1y=2x+1 and y=x+1y=x+1y=x+1 for 0≤x≤20\leq x\leq 20≤x≤2. Each cross section perpendicular to the xxx-axis is a square with a side in the base region. Set up the volume integral.
Show answer and explanation

Answer: D · Worked explanation

The upper curve minus the lower curve gives the square's side: (2x+1)−(x+1)=x(2x+1)-(x+1)=x(2x+1)−(x+1)=x. Thus the cross-sectional area is x2x^2x2, and integrating it from 0 to 2 gives the volume setup. Squaring the upper curve alone ignores the lower boundary and does not give the side of the square.
6.

Medium·Calculate[2 marks]

The cross-sectional area of a solid is A(x)=3xA(x)=3xA(x)=3x for 1≤x≤41\leq x\leq 41≤x≤4. Calculate its volume.
Show answer and explanation

Answer: A · Worked explanation

Integrate the area over the interval: V=∫143x dx=[3x2/2]14=(3/2)(16−1)=22.5V=\int_1^4 3x\,dx=[3x^2/2]_1^4=(3/2)(16-1)=22.5V=∫14​3xdx=[3x2/2]14​=(3/2)(16−1)=22.5 cubic units. The value 45 results from omitting the factor of one-half in the antiderivative of xxx.
7.

Medium·Calculate[2 marks]

A base region has vertical width 2−x2-x2−x for 0≤x≤20\leq x\leq 20≤x≤2. Its cross sections perpendicular to the xxx-axis are squares. Calculate the volume.
Show answer and explanation

Answer: D · Worked explanation

The square area is (2−x)2(2-x)^2(2−x)2, so V=∫02(2−x)2 dx=[−(2−x)3/3]02=8/3V=\int_0^2(2-x)^2\,dx=[-(2-x)^3/3]_0^2=8/3V=∫02​(2−x)2dx=[−(2−x)3/3]02​=8/3 cubic units. Integrating the side length instead would give 2 cubic units, not the volume.
8.

Medium·Set up[2 marks]

The base region lies between y=5y=5y=5 and y=xy=xy=x on 1≤x≤31\leq x\leq 31≤x≤3. Each rectangular cross section has base in the region and height equal to 3 times that base. Set up the volume integral.
Show answer and explanation

Answer: C · Worked explanation

The rectangle base is the vertical distance 5−x5-x5−x, and its height is 3(5−x)3(5-x)3(5−x). Multiplying these dimensions gives area 3(5−x)23(5-x)^23(5−x)2, which must be integrated from 1 to 3. The unsquared expression in the third option accounts for only one length factor and therefore is not a cross-sectional area.
9.

Medium·Calculate[2 marks]

For 0≤x≤20\leq x\leq 20≤x≤2, a solid has rectangular cross sections with base b(x)=xb(x)=xb(x)=x and height h(x)=x+1h(x)=x+1h(x)=x+1. Calculate its volume.
Show answer and explanation

Answer: C · Worked explanation

The area is x(x+1)=x2+xx(x+1)=x^2+xx(x+1)=x2+x. Thus V=∫02(x2+x) dx=[x3/3+x2/2]02=8/3+2=14/3V=\int_0^2(x^2+x)\,dx=[x^3/3+x^2/2]_0^2=8/3+2=14/3V=∫02​(x2+x)dx=[x3/3+x2/2]02​=8/3+2=14/3 cubic units. Integrating only x2x^2x2 would give 8/38/38/3, omitting the contribution from xxx.
10.

Hard·Explain[2 marks]

A student argues that a solid's volume can be found by integrating the side length of each square cross section because that length describes each slice. Explain which response correctly identifies the flaw.
Show answer and explanation

Answer: B · Worked explanation

A square cross section has area equal to the square of its side length, and a thin slice has volume approximately equal to that area times its thickness. Therefore, integrate the cross-sectional area, not the one-dimensional side length. Cubing the side length before integrating would not give the cross-sectional area.

Keep going

Next topic8.8 Volumes: triangle and semicircle cross sectionsPrevious topic8.6 Area between curves with several intersections

More in Unit 8 · Applications of Integration

  1. 8.3Accumulation in applied contextsNotes · 10 questions
  2. 8.4Area between curves (functions of x)Notes · 10 questions
  3. 8.5Area between curves (functions of y)Notes · 9 questions
  4. 8.6Area between curves with several intersectionsNotes · 10 questions
  5. 8.7Volumes: square and rectangle cross sectionsNotes · 10 questions
  6. 8.8Volumes: triangle and semicircle cross sectionsNotes · 10 questions
  7. 8.9Disc method about the x- or y-axisNotes · 10 questions
  8. 8.10Disc method about other axesNotes · 9 questions
  9. 8.11Washer method about the x- or y-axisNotes · 10 questions

All AP Calculus BC topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1Perpendicular slices turn volume into an integral
  2. 2The base region determines each slice width
  3. 3Squares use the base width as their side
  4. 4Rectangles need a second stated dimension
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe