Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Calculus BC
  3. ›8 Applications of Integration
  4. ›8.9 Disc method about the x- or y-axis

AP Calculus BC · Unit 8 · Applications of Integration

8.9 Disc method about the x- or y-axis

Find disc radii, set up volume integrals, and calculate volumes about the x- or y-axis.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4A disc forms when a region reaches the rotation axis
  1. 1A disc forms when a region reaches the rotation axis
  2. 2Rotation about the x-axis uses vertical slices
  3. 3Rotation about the y-axis uses horizontal slices
  4. 4Integrating disc areas gives the total volume
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: A disc forms when a region reaches the rotation axis

Imagine rotating a region around an axis. A thin slice perpendicular to that axis sweeps out a disc. Its radius is the distance from the axis to the region’s outer edge. The disc has no hole because the region reaches the axis. Its area is A=πr2A=\pi r^2A=πr2, where rrr is the radius.

To find volume, add the volumes of many thin discs. Each disc contributes its area times its thickness. Integration adds these contributions as the thickness approaches zero. Always choose slices perpendicular to the axis of rotation.

Figure 1. A vertical slice reaches from the x-axis to the curve. Rotating it makes a disc with radius f(x)f(x)f(x).

Key terms · tap one for its definition

disc

A disc is a circular cross section formed by rotating a slice that reaches the axis of rotation.

radius

The radius is the perpendicular distance from the rotation axis to a disc’s outer edge.

Part 1 done

2

Part 2 of 4: Rotation about the x-axis uses vertical slices

Suppose a region lies between y=f(x)y=f(x)y=f(x) and the x-axis, from x=ax=ax=a to x=bx=bx=b. Assume f(x)≥0f(x)\geq 0f(x)≥0 throughout this interval. A vertical slice rotates into a disc with radius r=f(x)r=f(x)r=f(x). Its cross-sectional area is A(x)=π[f(x)]2A(x)=\pi[f(x)]^2A(x)=π[f(x)]2. The slice thickness is dxdxdx, so the volume is V=π∫ab[f(x)]2 dxV=\pi\int_a^b[f(x)]^2\,dxV=π∫ab​[f(x)]2dx.

The limits of integration are the left and right ends of the region. If the graph lies below the x-axis, the radius is ∣f(x)∣|f(x)|∣f(x)∣. Squaring gives the same volume formula. Check that the region reaches the x-axis before using discs.

Key terms · tap one for its definition

cross-sectional area

Cross-sectional area is the area of one slice perpendicular to the axis of rotation.

limits of integration

Limits of integration give the interval along the axis over which disc areas are added.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the integral that gives the volume when the region between y=3y=3y=3 and the x-axis, for 1≤x≤41\leq x\leq 41≤x≤4, is rotated about the x-axis.
Show answer and explanation

Answer: B · Worked explanation

The region reaches the x-axis, so vertical slices form discs with radius 3 and thickness dxdxdx. The limits are the horizontal extent, x=1x=1x=1 to x=4x=4x=4, giving π∫1432 dx\pi\int_1^4 3^2\,dxπ∫14​32dx. The expression without squaring uses a length rather than a disc area.
3

Part 3 of 4: Rotation about the y-axis uses horizontal slices

Suppose a region lies between x=g(y)x=g(y)x=g(y) and the y-axis, from y=cy=cy=c to y=dy=dy=d. Assume g(y)≥0g(y)\geq 0g(y)≥0 throughout this interval. Horizontal slices are perpendicular to the y-axis. Each slice forms a disc with radius r=g(y)r=g(y)r=g(y) and thickness dydydy. Therefore, V=π∫cd[g(y)]2 dyV=\pi\int_c^d[g(y)]^2\,dyV=π∫cd​[g(y)]2dy.

The function must give the outer edge as an x-value for each y-value. Sometimes this requires an inverse relation. For example, y=x2y=x^2y=x2 gives x=yx=\sqrt{y}x=y​ on its right-hand branch. Use the region’s lowest and highest y-values as the limits.

Common mistake

Do not use vertical discs for rotation about the y-axis. Discs must be perpendicular to the axis.

Key terms · tap one for its definition

Horizontal slices

Horizontal slices are cuts at fixed y-values, perpendicular to the y-axis.

inverse relation

An inverse relation expresses x in terms of y for a chosen branch of a graph.

Part 3 done

4

Part 4 of 4: Integrating disc areas gives the total volume

Once the radius and limits are known, evaluate the definite integral. Square the whole radius expression before integrating. Then apply the limits and multiply by π\piπ. If lengths are measured in centimeters, the result has cubic units, written cm3\mathrm{cm^3}cm3.

Worked example

Volume under a line rotated about the x-axis

Rotate the region under y=xy=xy=x, above the x-axis, from x=0x=0x=0 to x=2x=2x=2. Find its volume in cm3\mathrm{cm^3}cm3, where both axes measure centimeters.
  1. 1
    The disc radius is r=xr=xr=x, and the thickness is dxdxdx.
  2. 2
    Set up V=π∫02x2 dxV=\pi\int_0^2 x^2\,dxV=π∫02​x2dx.
  3. 3
    Integrate: V=π[x33]02V=\pi\left[\frac{x^3}{3}\right]_0^2V=π[3x3​]02​.
  4. 4
    Apply the limits: V=π(83−0)V=\pi\left(\frac{8}{3}-0\right)V=π(38​−0).

Answer: V=8π3 cm3V=\frac{8\pi}{3}\,\mathrm{cm^3}V=38π​cm3.

Exam tip

Show the radius and limits in your setup. Include cubic units in the final answer.

Key terms · tap one for its definition

definite integral

A definite integral adds quantities over a specified interval and produces a value.

cubic units

Cubic units measure volume, with each unit representing a cube one length unit on each side.

Note read

Check your recall[13 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Identify[1 mark]

    Identify the direction of slices used for discs about the y-axis.

    Show mark schemeHide mark scheme

    Model answer

    Use horizontal slices.

    • 1 mark for identifying horizontal slices
  2. 2.Explain[2 marks]

    Explain why a region reaching the x-axis forms discs when rotated about it.

    Show mark schemeHide mark scheme

    Model answer

    A slice reaches the rotation axis, so its rotation fills the circle. The cross section has no hole.

    • 1 mark for stating that each slice reaches the rotation axis
    • 1 mark for explaining that rotation produces a circular cross section with no hole
  3. 3.Write[3 marks]

    Write a disc-method integral for the region under y=x+1y=x+1y=x+1 from x=0x=0x=0 to x=2x=2x=2, rotated about the x-axis.

    Show mark schemeHide mark scheme

    Model answer

    The radius is x+1x+1x+1, so V=π∫02(x+1)2 dxV=\pi\int_0^2(x+1)^2\,dxV=π∫02​(x+1)2dx.

    • 1 mark for identifying the radius as x+1x+1x+1
    • 1 mark for squaring the radius and multiplying by π\piπ
    • 1 mark for using limits 0 and 2 with dxdxdx
  4. 4.Write[3 marks]

    Write a disc-method integral for the region between x=y+1x=y+1x=y+1 and the y-axis, from y=0y=0y=0 to y=2y=2y=2, rotated about the y-axis.

    Show mark schemeHide mark scheme

    Model answer

    The radius is y+1y+1y+1, so V=π∫02(y+1)2 dyV=\pi\int_0^2(y+1)^2\,dyV=π∫02​(y+1)2dy.

    • 1 mark for identifying the radius as y+1y+1y+1
    • 1 mark for squaring the radius and multiplying by π\piπ
    • 1 mark for using limits 0 and 2 with dydydy
  5. 5.Calculate[4 marks]

    Calculate the volume formed by rotating the region under y=xy=xy=x from x=0x=0x=0 to x=3x=3x=3 about the x-axis. Both axes measure centimeters.

    Show mark schemeHide mark scheme

    Model answer

    The radius is xxx. Thus V=π∫03x2 dx=π[x33]03=9π cm3V=\pi\int_0^3x^2\,dx=\pi\left[\frac{x^3}{3}\right]_0^3=9\pi\,\mathrm{cm^3}V=π∫03​x2dx=π[3x3​]03​=9πcm3.

    • 1 mark for identifying the radius as xxx
    • 1 mark for setting up π∫03x2 dx\pi\int_0^3x^2\,dxπ∫03​x2dx
    • 1 mark for integrating to obtain π[x33]03\pi\left[\frac{x^3}{3}\right]_0^3π[3x3​]03​
    • 1 mark for giving 9π cm39\pi\,\mathrm{cm^3}9πcm3

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·State[1 mark]

A region between x=0x=0x=0 and x=5−yx=5-yx=5−y is rotated about the y-axis. What is the disc radius at height y=2y=2y=2?
Show answer and explanation

Answer: D · Worked explanation

At y=2y=2y=2, the outer edge is x=5−2=3x=5-2=3x=5−2=3. Since the rotation axis is the y-axis, the radius is the horizontal distance from x=0x=0x=0 to that edge, which is 3. The value 2 is the slice's y-coordinate, not its distance from the axis.
3.

Easy·Identify[1 mark]

A solid is formed by rotating a region about the y-axis, and the radius of a disc at height yyy is r(y)r(y)r(y). Which expression gives the area of that disc?
Show answer and explanation

Answer: D · Worked explanation

A disc is a circle, whose area is πr2\pi r^2πr2. Substituting the radius function gives π[r(y)]2\pi[r(y)]^2π[r(y)]2. The expression 2πr(y)2\pi r(y)2πr(y) is a circumference, not an area, and omitting π\piπ does not give the area of a circular cross section.
4.

Easy·Identify[1 mark]

Which slice direction should be used to form discs when a region is rotated about the x-axis?
Show answer and explanation

Answer: A · Worked explanation

Disc-method slices must be perpendicular to the axis of rotation. For the x-axis, that means vertical slices, which have thickness dxdxdx. Horizontal slices are parallel to the x-axis and do not produce the perpendicular discs used in this method.
5.

Medium·Set up[2 marks]

The region under y=2xy=2xy=2x and above the x-axis, from x=1x=1x=1 to x=3x=3x=3, is rotated about the x-axis. Which integral represents its volume?
Show answer and explanation

Answer: D · Worked explanation

At each xxx, a vertical slice forms a disc of radius 2x2x2x, so its area is π(2x)2\pi(2x)^2π(2x)2 and the thickness is dxdxdx. The region's left and right endpoints give limits 1 and 3. Integrating the radius without squaring it does not add disc areas.
6.

Medium·Determine[2 marks]

A region between the y-axis and x=y+1x=\sqrt{y+1}x=y+1​ is rotated about the y-axis. Determine the radius of the disc at y=8y=8y=8.
Show answer and explanation

Answer: A · Worked explanation

The radius is the x-coordinate of the outer edge at the specified height. Substituting y=8y=8y=8 gives x=8+1=3x=\sqrt{8+1}=3x=8+1​=3. The value 8 is the height, while 9 is the quantity inside the square root rather than the radius.
7.

Medium·Calculate[2 marks]

A region under y=1y=1y=1 and above the x-axis, from x=0x=0x=0 to x=2x=2x=2, is rotated about the x-axis. Calculate the volume.
Show answer and explanation

Answer: C · Worked explanation

Each disc has radius 1, so V=π∫0212 dx=π[x]02=2πV=\pi\int_0^2 1^2\,dx=\pi[x]_0^2=2\piV=π∫02​12dx=π[x]02​=2π. The value 4π4\pi4π would result from squaring the interval length, π⋅22\pi\cdot 2^2π⋅22, instead of integrating the disc area π⋅12\pi\cdot 1^2π⋅12 over the interval.
8.

Medium·Calculate[2 marks]

The region between x=yx=yx=y and the y-axis, for 0≤y≤20\leq y\leq 20≤y≤2, is rotated about the y-axis. Calculate its volume.
Show answer and explanation

Answer: B · Worked explanation

A horizontal slice at height yyy has radius yyy, so V=π∫02y2 dy=π[y33]02=8π3V=\pi\int_0^2 y^2\,dy=\pi[\frac{y^3}{3}]_0^2=\frac{8\pi}{3}V=π∫02​y2dy=π[3y3​]02​=38π​. The value 4π4\pi4π is only the area of the largest disc, π⋅22\pi\cdot 2^2π⋅22, with no integration along the interval.
9.

Medium·Set up[2 marks]

The region between y=xy=\sqrt{x}y=x​ and the x-axis, from x=0x=0x=0 to x=4x=4x=4, is rotated about the x-axis. Which setup uses the radius and limits correctly?
Show answer and explanation

Answer: A · Worked explanation

The radius at position xxx is x\sqrt{x}x​, and the region extends from x=0x=0x=0 to x=4x=4x=4. Vertical discs therefore give V=π∫04(x)2 dxV=\pi\int_0^4(\sqrt{x})^2\,dxV=π∫04​(x​)2dx. The upper limit 2 is the maximum y-value, not the right endpoint along the x-axis.
10.

Hard·Determine[2 marks]

The region bounded by y=x2y=x^2y=x2, the y-axis, and the horizontal line y=9y=9y=9 is rotated about the y-axis. On the right-hand branch, what is the radius of a disc at height y=4y=4y=4?
Show answer and explanation

Answer: A · Worked explanation

The radius must be written as an x-value in terms of y. From y=x2y=x^2y=x2, the right-hand branch gives x=yx=\sqrt{y}x=y​, so at y=4y=4y=4 the radius is 4=2\sqrt{4}=24​=2. Using 4 confuses the height with the horizontal distance to the y-axis.

Keep going

Next topic8.10 Disc method about other axesPrevious topic8.8 Volumes: triangle and semicircle cross sections

More in Unit 8 · Applications of Integration

  1. 8.5Area between curves (functions of y)Notes · 9 questions
  2. 8.6Area between curves with several intersectionsNotes · 10 questions
  3. 8.7Volumes: square and rectangle cross sectionsNotes · 10 questions
  4. 8.8Volumes: triangle and semicircle cross sectionsNotes · 10 questions
  5. 8.9Disc method about the x- or y-axisNotes · 10 questions
  6. 8.10Disc method about other axesNotes · 9 questions
  7. 8.11Washer method about the x- or y-axisNotes · 10 questions
  8. 8.12Washer method about other axesNotes · 9 questions
  9. 8.13Arc lengthNotes · 10 questions· BC only

All AP Calculus BC topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1A disc forms when a region reaches the rotation axis
  2. 2Rotation about the x-axis uses vertical slices
  3. 3Rotation about the y-axis uses horizontal slices
  4. 4Integrating disc areas gives the total volume
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe