Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Chemistry
  3. ›5 Kinetics
  4. ›5.1 Reaction rates

AP Chemistry · Unit 5 · Kinetics

5.1 Reaction rates

Define reaction rate, calculate it from concentration changes, interpret concentration graphs, and explain factors that affect rate.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Reaction rate measures concentration change per unit time
  1. 1Reaction rate measures concentration change per unit time
  2. 2Concentration measurements give average rates over chosen intervals
  3. 3Concentration graphs show both direction and changing rate
  4. 4Conditions change how quickly reactants form products
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Reaction rate measures concentration change per unit time

A reaction rate describes how quickly reactants disappear or products form. It measures a concentration change divided by elapsed time. Reactant concentrations decrease, while product concentrations increase. Rates are reported as positive quantities, so a reactant’s concentration change needs a minus sign.

When concentration is measured in mol L−1\mathrm{mol\,L^{-1}}molL−1 and time in seconds, rate units are mol L−1 s−1\mathrm{mol\,L^{-1}\,s^{-1}}molL−1s−1. An average rate uses two measurements separated by a time interval. An instantaneous rate describes the rate at one moment. It comes from the slope of a tangent to a concentration–time curve. Reaction rates can change as a reaction proceeds.

Key terms · tap one for its definition

reaction rate

Reaction rate is the change in reactant or product concentration per unit time, reported as a positive quantity.

average rate

Average rate is the magnitude of a concentration change divided by its elapsed time interval.

instantaneous rate

Instantaneous rate is the rate at a particular time, obtained from the tangent slope of a concentration–time curve.

Part 1 done

2

Part 2 of 4: Concentration measurements give average rates over chosen intervals

To measure a rate, record a reactant or product concentration at known times. For a reactant AAA, its average disappearance rate is −Δ[A]Δt-\frac{\Delta[A]}{\Delta t}−ΔtΔ[A]​. For a product PPP, its average formation rate is Δ[P]Δt\frac{\Delta[P]}{\Delta t}ΔtΔ[P]​. Here, Δ[A]\Delta[A]Δ[A] means final concentration minus initial concentration.

Worked example

Calculate average disappearance rates

A reactant has concentrations of 0.80, 0.60, and 0.45 mol L−1\mathrm{mol\,L^{-1}}molL−1 at 0, 10, and 20 seconds. Find its average disappearance rate over each ten-second interval.
  1. 1
    From 0 to 10 seconds: Δ[A]=0.60−0.80=−0.20 mol L−1\Delta[A]=0.60-0.80=-0.20\ \mathrm{mol\,L^{-1}}Δ[A]=0.60−0.80=−0.20 molL−1.
  2. 2
    Rate from 0 to 10 seconds: −−0.2010=0.020 mol L−1 s−1-\frac{-0.20}{10}=0.020\ \mathrm{mol\,L^{-1}\,s^{-1}}−10−0.20​=0.020 molL−1s−1.
  3. 3
    From 10 to 20 seconds: Δ[A]=0.45−0.60=−0.15 mol L−1\Delta[A]=0.45-0.60=-0.15\ \mathrm{mol\,L^{-1}}Δ[A]=0.45−0.60=−0.15 molL−1.
  4. 4
    Rate from 10 to 20 seconds: −−0.1510=0.015 mol L−1 s−1-\frac{-0.15}{10}=0.015\ \mathrm{mol\,L^{-1}\,s^{-1}}−10−0.15​=0.015 molL−1s−1.

Answer: The average disappearance rates are 0.020 and 0.015 mol L−1 s−1\mathrm{mol\,L^{-1}\,s^{-1}}molL−1s−1, respectively.

Exam tip

State the time interval with an average rate. Include concentration-per-time units in the answer.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the quantity that describes how quickly reactants disappear or products form.
Show answer and explanation

Answer: C · Worked explanation

Reaction rate measures concentration change per unit time, so it describes how quickly reactants disappear or products form. The total concentration at the end does not indicate how quickly the change occurred.
3

Part 3 of 4: Concentration graphs show both direction and changing rate

On a concentration–time graph, a reactant curve falls as the reaction proceeds. A product curve rises. The slope gives concentration change per unit time. A steeper curve means a faster disappearance or formation rate. For a reactant, the slope is negative, but its disappearance rate is positive.

A tangent touches a smooth curve at the chosen time. Its slope gives an instantaneous rate for a product; negate it for a reactant’s positive disappearance rate. A line joining two points gives an interval’s average concentration change. A curve that becomes flatter shows that the measured rate is slowing. A flat section means that concentration is no longer changing measurably; it does not, by itself, explain why.

Figure 1. The reactant falls more steeply at first. A secant shows an interval’s average rate; a tangent shows a rate at one time.

Common mistake

A falling reactant curve does not mean the reaction rate is negative. The reactant’s disappearance rate is the negative of its curve’s slope.

Key terms · tap one for its definition

slope

Slope on a concentration–time graph is concentration change divided by time change.

tangent

A tangent is a straight line used to determine a smooth curve’s slope at one point.

Part 3 done

4

Part 4 of 4: Conditions change how quickly reactants form products

Several conditions can change reaction rate. Raising temperature usually increases it because particles have more energy. Increasing reactant concentration often increases rate because more reactant particles occupy the same volume. For gases, increasing pressure by decreasing volume often has a similar effect. These are common trends, not numerical rate rules.

Greater exposed surface area can speed a reaction involving a solid. More of the solid is available to contact other reactants. A catalyst can increase rate by providing a different reaction pathway. It is regenerated overall rather than used up permanently. The size of any rate change depends on the particular reaction and its conditions.

Exam tip

When explaining a rate change, name the changed condition and link it to a physical reason. Avoid claiming that every reaction responds by the same amount.

Key terms · tap one for its definition

temperature

Temperature measures the average kinetic energy of particles and often affects reaction rate.

reactant concentration

Reactant concentration is the amount of reactant per unit volume of solution.

catalyst

A catalyst increases reaction rate through another pathway and is regenerated overall.

Note read

Check your recall[15 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[2 marks]

    State what reaction rate measures and give its units when concentration is in mol L⁻¹ and time is in seconds.

    Show mark schemeHide mark scheme

    Model answer

    Reaction rate measures concentration change per unit time. Its units are mol L−1 s−1\mathrm{mol\,L^{-1}\,s^{-1}}molL−1s−1.

    • 1 mark for stating that rate measures concentration change per unit time
    • 1 mark for giving mol L−1 s−1\mathrm{mol\,L^{-1}\,s^{-1}}molL−1s−1 as the units
  2. 2.Calculate[3 marks]

    Calculate a reactant’s average disappearance rate if its concentration falls from 0.90 to 0.54 mol L−1\mathrm{mol\,L^{-1}}molL−1 in 12 seconds.

    Show mark schemeHide mark scheme

    Model answer

    The concentration change is 0.54−0.90=−0.36 mol L−10.54-0.90=-0.36\ \mathrm{mol\,L^{-1}}0.54−0.90=−0.36 molL−1. The disappearance rate is −−0.3612=0.030 mol L−1 s−1-\frac{-0.36}{12}=0.030\ \mathrm{mol\,L^{-1}\,s^{-1}}−12−0.36​=0.030 molL−1s−1.

    • 1 mark for calculating the concentration change as −0.36 mol L−1-0.36\ \mathrm{mol\,L^{-1}}−0.36 molL−1
    • 1 mark for dividing the magnitude of the change by 12 seconds
    • 1 mark for giving the positive rate as 0.030 mol L−1 s−10.030\ \mathrm{mol\,L^{-1}\,s^{-1}}0.030 molL−1s−1
  3. 3.Explain[3 marks]

    Explain how a reactant concentration–time graph gives an average rate and an instantaneous rate.

    Show mark schemeHide mark scheme

    Model answer

    The slope between two points gives the average concentration change per unit time. The slope of a tangent gives the change at one time. Negate either reactant slope to report a positive disappearance rate.

    • 1 mark for using the slope between two points for an average rate
    • 1 mark for using a tangent slope for an instantaneous rate
    • 1 mark for negating the reactant slope to obtain a positive disappearance rate
  4. 4.Interpret[2 marks]

    Interpret a product concentration–time curve that rises and then becomes flatter.

    Show mark schemeHide mark scheme

    Model answer

    Product concentration is increasing. Its formation rate is slowing because the curve’s slope is decreasing.

    • 1 mark for identifying that product concentration increases
    • 1 mark for linking the flatter curve to a smaller formation rate
  5. 5.Explain[3 marks]

    Explain why increasing temperature and increasing a solid reactant’s exposed surface area can increase reaction rate.

    Show mark schemeHide mark scheme

    Model answer

    Higher temperature gives particles more energy and usually increases rate. Greater exposed surface area lets more of the solid contact other reactants, which can also increase rate.

    • 1 mark for stating that higher temperature gives particles more energy
    • 1 mark for linking higher temperature to a usual increase in rate
    • 1 mark for linking greater exposed surface area to more contact with other reactants
  6. 6.Describe[2 marks]

    Describe how a catalyst affects reaction rate and what happens to it overall.

    Show mark schemeHide mark scheme

    Model answer

    A catalyst increases rate by providing a different reaction pathway. It is regenerated overall.

    • 1 mark for stating that a catalyst increases rate through a different pathway
    • 1 mark for stating that the catalyst is regenerated overall

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·State[1 mark]

State the units of reaction rate when concentration is measured in mol L−1\mathrm{mol\,L^{-1}}molL−1 and time is measured in seconds.
Show answer and explanation

Answer: D · Worked explanation

Rate units are concentration units divided by time units, giving mol L−1 s−1\mathrm{mol\,L^{-1}\,s^{-1}}molL−1s−1. The option with seconds multiplied rather than divided would not represent concentration change per unit time.
3.

Easy·Determine[1 mark]

A product concentration increases from 0.12 mol L−10.12\ \mathrm{mol\,L^{-1}}0.12 molL−1 to 0.30 mol L−10.30\ \mathrm{mol\,L^{-1}}0.30 molL−1 over 9.0 s9.0\ \mathrm{s}9.0 s. Determine its average formation rate.
Show answer and explanation

Answer: B · Worked explanation

The concentration change is 0.30−0.12=0.18 mol L−10.30-0.12=0.18\ \mathrm{mol\,L^{-1}}0.30−0.12=0.18 molL−1. Dividing by 9.0 s9.0\ \mathrm{s}9.0 s gives an average formation rate of 0.020 mol L−1 s−10.020\ \mathrm{mol\,L^{-1}\,s^{-1}}0.020 molL−1s−1; the negative value incorrectly assigns a decrease to a product that increased.
4.

Easy·Identify[1 mark]

On a smooth concentration–time curve, which quantity gives the instantaneous concentration change per unit time at a selected moment?
Show answer and explanation

Answer: A · Worked explanation

The tangent's slope at the selected moment gives the instantaneous rate because it represents the curve's slope at that point. A line joining two points instead gives an average change over an interval.
5.

Medium·Calculate[2 marks]

A reactant concentration falls from 0.72 mol L−10.72\ \mathrm{mol\,L^{-1}}0.72 molL−1 to 0.48 mol L−10.48\ \mathrm{mol\,L^{-1}}0.48 molL−1 between 5.0 s5.0\ \mathrm{s}5.0 s and 17.0 s17.0\ \mathrm{s}17.0 s. Calculate its average disappearance rate over this interval.
Show answer and explanation

Answer: B · Worked explanation

The reactant change is Δ[A]=0.48−0.72=−0.24 mol L−1\Delta[A]=0.48-0.72=-0.24\ \mathrm{mol\,L^{-1}}Δ[A]=0.48−0.72=−0.24 molL−1, and the time interval is 17.0−5.0=12.0 s17.0-5.0=12.0\ \mathrm{s}17.0−5.0=12.0 s. The positive disappearance rate is −Δ[A]/Δt=0.24/12.0=0.020 mol L−1 s−1-\Delta[A]/\Delta t=0.24/12.0=0.020\ \mathrm{mol\,L^{-1}\,s^{-1}}−Δ[A]/Δt=0.24/12.0=0.020 molL−1s−1; the negative option is the signed slope, not the positive disappearance rate.
6.

Medium·Interpret[1 mark]

A reactant concentration–time curve has a slope of −0.035 mol L−1 s−1-0.035\ \mathrm{mol\,L^{-1}\,s^{-1}}−0.035 molL−1s−1 at one instant. Interpret this value as the reactant's instantaneous disappearance rate.
Show answer and explanation

Answer: D · Worked explanation

The negative slope indicates that reactant concentration is decreasing; the positive disappearance rate is the negative of that slope, or 0.035 mol L−1 s−10.035\ \mathrm{mol\,L^{-1}\,s^{-1}}0.035 molL−1s−1. Keeping the slope's negative sign confuses concentration change with the reported positive disappearance rate.
7.

Medium·Deduce[1 mark]

A product concentration rises from 0.10 to 0.34 mol L−10.34\ \mathrm{mol\,L^{-1}}0.34 molL−1 during the first 8.0 s8.0\ \mathrm{s}8.0 s, then rises from 0.34 to 0.46 mol L−10.46\ \mathrm{mol\,L^{-1}}0.46 molL−1 during the next 8.0 s8.0\ \mathrm{s}8.0 s. Deduce how its average formation rate changes.
Show answer and explanation

Answer: A · Worked explanation

The first interval's rate is (0.34−0.10)/8.0=0.030 mol L−1 s−1(0.34-0.10)/8.0=0.030\ \mathrm{mol\,L^{-1}\,s^{-1}}(0.34−0.10)/8.0=0.030 molL−1s−1; the second is (0.46−0.34)/8.0=0.015 mol L−1 s−1(0.46-0.34)/8.0=0.015\ \mathrm{mol\,L^{-1}\,s^{-1}}(0.46−0.34)/8.0=0.015 molL−1s−1. The concentration rises in both intervals, but the smaller change over the same time means the formation rate decreases.
8.

Medium·Explain[2 marks]

A gas-phase reaction mixture is compressed by decreasing its volume while the amounts of reactants remain unchanged. Explain why the reaction rate often increases.
Show answer and explanation

Answer: B · Worked explanation

Decreasing volume with the same amount of gas increases reactant concentration, which often increases reaction rate because more reactant particles occupy the same volume. Compression does not create additional reactant or necessarily act as a catalyst.
9.

Medium·Identify[1 mark]

Which change most directly increases the exposed surface area of a solid reactant without changing its chemical identity?
Show answer and explanation

Answer: C · Worked explanation

Crushing a solid into smaller pieces exposes more of its surface to other reactants, which can speed a reaction involving that solid. Cooling changes temperature, not the solid's exposed surface area.
10.

Hard·Determine[2 marks]

In trial 1, a reaction proceeds at 0.018 mol L−1 s−10.018\ \mathrm{mol\,L^{-1}\,s^{-1}}0.018 molL−1s−1. In trial 2, its temperature and the exposed surface area of a solid reactant are both increased, and its rate is 0.050 mol L−1 s−10.050\ \mathrm{mol\,L^{-1}\,s^{-1}}0.050 molL−1s−1. Determine the conclusion best supported by these trials.
Show answer and explanation

Answer: A · Worked explanation

The observed rate is higher in trial 2, so the combined changes are associated with an increase from 0.018 to 0.050 mol L−1 s−10.050\ \mathrm{mol\,L^{-1}\,s^{-1}}0.050 molL−1s−1. Because both temperature and surface area changed together, the data do not show how much either change contributed on its own.

Keep going

Next topic5.2 Introduction to rate lawPrevious topic4.9 Oxidation-reduction (redox) reactions

More in Unit 5 · Kinetics

  1. 5.1Reaction ratesNotes · 10 questions
  2. 5.2Introduction to rate lawNotes · 10 questions
  3. 5.3Concentration changes over timeNotes · 10 questions
  4. 5.4Elementary reactionsNotes · 10 questions
  5. 5.5Collision modelNotes · 10 questions
  6. 5.6Reaction energy profileNotes · 10 questions
  7. 5.7Introduction to reaction mechanismsNotes · 10 questions
  8. 5.8Reaction mechanism and rate lawNotes · 10 questions
  9. 5.9Steady-state approximationNotes · 10 questions

All AP Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1Reaction rate measures concentration change per unit time
  2. 2Concentration measurements give average rates over chosen intervals
  3. 3Concentration graphs show both direction and changing rate
  4. 4Conditions change how quickly reactants form products
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe