Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Chemistry
  3. ›5 Kinetics
  4. ›5.9 Steady-state approximation

AP Chemistry · Unit 5 · Kinetics

5.9 Steady-state approximation

Apply the steady-state approximation to an intermediate and derive a rate law for a multistep reaction.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Steady state balances an intermediate’s formation and consumption
  1. 1Steady state balances an intermediate’s formation and consumption
  2. 2Each elementary step contributes to the intermediate’s balance
  3. 3Substitution removes the intermediate from the rate law
  4. 4The derived law applies only when steady state holds
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Steady state balances an intermediate’s formation and consumption

An intermediate forms in one step and is consumed in another. Its concentration can change rapidly when a reaction begins. Under the steady-state approximation, its formation and consumption rates become nearly equal. Its concentration then changes slowly enough to treat d[I]dt\frac{d[I]}{dt}dtd[I]​ as approximately zero.

This does not mean the intermediate’s concentration is zero. It also does not mean the overall reaction has stopped. Reactants can keep forming the intermediate while later steps keep consuming it. The approximation is useful when that balance holds over the period being analyzed.

Common mistake

Do not set every step’s rate equal. Balance all pathways that form the intermediate against all pathways that consume it.

Key terms · tap one for its definition

intermediate

A substance produced in one mechanism step and consumed in a later step.

steady-state approximation

An approximation that treats an intermediate’s concentration as nearly constant because its formation and consumption rates nearly balance.

Part 1 done

2

Part 2 of 4: Each elementary step contributes to the intermediate’s balance

Consider this mechanism: A→IA \rightarrow IA→I with rate constant k1k_1k1​; I→AI \rightarrow AI→A with k−1k_{-1}k−1​; and I+B→PI+B \rightarrow PI+B→P with k2k_2k2​. The first step forms III. The other two consume it. Because these are elementary steps, their rates follow directly from their reactants.

Write the intermediate balance as d[I]dt=k1[A]−k−1[I]−k2[I][B]\frac{d[I]}{dt}=k_1[A]-k_{-1}[I]-k_2[I][B]dtd[I]​=k1​[A]−k−1​[I]−k2​[I][B]. At steady state, set this expression approximately equal to zero. Rearranging gives k1[A]=[I](k−1+k2[B])k_1[A]=[I](k_{-1}+k_2[B])k1​[A]=[I](k−1​+k2​[B]). Therefore, [I]≈k1[A]k−1+k2[B][I]\approx\frac{k_1[A]}{k_{-1}+k_2[B]}[I]≈k−1​+k2​[B]k1​[A]​.

Figure 1. The intermediate forms through one step and leaves through two competing steps.

Key term

intermediate balance

An equation expressing an intermediate’s concentration change as its total formation rate minus its total consumption rate.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the species that is an intermediate in the sequence X→Y→ZX \rightarrow Y \rightarrow ZX→Y→Z.
Show answer and explanation

Answer: B · Worked explanation

YYY is produced in the first step and consumed in the second, which is the defining role of an intermediate in a mechanism. XXX is a reactant and ZZZ is the final product; appearing in multiple steps is not required to identify an intermediate.
3

Part 3 of 4: Substitution removes the intermediate from the rate law

Product forms in the last step, so d[P]dt=k2[I][B]\frac{d[P]}{dt}=k_2[I][B]dtd[P]​=k2​[I][B]. Substitute the steady-state expression for [I][I][I]. The resulting product formation rate is d[P]dt=k1k2[A][B]k−1+k2[B]\frac{d[P]}{dt}=\frac{k_1k_2[A][B]}{k_{-1}+k_2[B]}dtd[P]​=k−1​+k2​[B]k1​k2​[A][B]​.

More clearly, d[P]dt=k1k2[A][B]k−1+k2[B]\frac{d[P]}{dt}=\frac{k_1k_2[A][B]}{k_{-1}+k_2[B]}dtd[P]​=k−1​+k2​[B]k1​k2​[A][B]​. This rate law contains reactant concentrations but no intermediate concentration. The denominator accounts for both ways that III can be consumed.

Worked example

Calculate a steady-state product formation rate

For this mechanism, k1=0.020 s−1k_1=0.020\,\mathrm{s^{-1}}k1​=0.020s−1, k−1=0.30 s−1k_{-1}=0.30\,\mathrm{s^{-1}}k−1​=0.30s−1, and k2=0.50 L mol−1 s−1k_2=0.50\,\mathrm{L\,mol^{-1}\,s^{-1}}k2​=0.50Lmol−1s−1. Find the product formation rate when [A]=0.40 mol L−1[A]=0.40\,\mathrm{mol\,L^{-1}}[A]=0.40molL−1 and [B]=0.20 mol L−1[B]=0.20\,\mathrm{mol\,L^{-1}}[B]=0.20molL−1.
  1. 1
    Calculate k2[B]=(0.50 L mol−1 s−1)(0.20 mol L−1)=0.10 s−1k_2[B]=(0.50\,\mathrm{L\,mol^{-1}\,s^{-1}})(0.20\,\mathrm{mol\,L^{-1}})=0.10\,\mathrm{s^{-1}}k2​[B]=(0.50Lmol−1s−1)(0.20molL−1)=0.10s−1.
  2. 2
    Calculate k−1+k2[B]=0.30+0.10=0.40 s−1k_{-1}+k_2[B]=0.30+0.10=0.40\,\mathrm{s^{-1}}k−1​+k2​[B]=0.30+0.10=0.40s−1.
  3. 3
    Find [I]≈(0.020 s−1)(0.40 mol L−1)0.40 s−1=0.020 mol L−1[I]\approx\frac{(0.020\,\mathrm{s^{-1}})(0.40\,\mathrm{mol\,L^{-1}})}{0.40\,\mathrm{s^{-1}}}=0.020\,\mathrm{mol\,L^{-1}}[I]≈0.40s−1(0.020s−1)(0.40molL−1)​=0.020molL−1.
  4. 4
    Find d[P]dt=(0.50 L mol−1 s−1)(0.020 mol L−1)(0.20 mol L−1)=0.0020 mol L−1 s−1\frac{d[P]}{dt}=(0.50\,\mathrm{L\,mol^{-1}\,s^{-1}})(0.020\,\mathrm{mol\,L^{-1}})(0.20\,\mathrm{mol\,L^{-1}})=0.0020\,\mathrm{mol\,L^{-1}\,s^{-1}}dtd[P]​=(0.50Lmol−1s−1)(0.020molL−1)(0.20molL−1)=0.0020molL−1s−1.

Answer: The product formation rate is 0.0020 mol L−1 s−10.0020\,\mathrm{mol\,L^{-1}\,s^{-1}}0.0020molL−1s−1.

Key term

product formation rate

The rate at which product concentration increases, written here as d[P]dt\frac{d[P]}{dt}dtd[P]​.

Part 3 done

4

Part 4 of 4: The derived law applies only when steady state holds

The derivation depends on [I][I][I] changing slowly compared with its formation and consumption. It may not describe the brief period just after the reaction begins. If conditions change sharply, the intermediate concentration may need time to adjust.

The derived law also shows why an apparent reaction order can depend on conditions. When k−1k_{-1}k−1​ dominates the denominator, the rate is approximately proportional to both [A][A][A] and [B][B][B]. When k2[B]k_2[B]k2​[B] dominates, the rate approaches k1[A]k_1[A]k1​[A] and becomes nearly independent of [B][B][B]. These are limiting cases, not separate mechanisms.

Exam tip

Show the full intermediate balance before setting it to zero. Then substitute into the product-forming step and simplify.

Key term

apparent reaction order

The dependence of an observed rate on concentration under specified conditions.

Note read

Check your recall[12 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[1 mark]

    State what the steady-state approximation assumes about an intermediate’s concentration.

    Show mark schemeHide mark scheme

    Model answer

    The intermediate’s concentration changes slowly enough that its rate of change is approximately zero.

    • 1 mark for stating that the intermediate’s rate of concentration change is approximately zero
  2. 2.Explain[2 marks]

    Explain why steady state does not require the intermediate’s concentration to be zero.

    Show mark schemeHide mark scheme

    Model answer

    The intermediate continues to form and be consumed. Its concentration can remain nonzero because those rates nearly balance.

    • 1 mark for stating that the intermediate continues to form and be consumed
    • 1 mark for explaining that nearly balanced rates allow a nonzero concentration to remain nearly constant
  3. 3.Show[3 marks]

    Show how steady state gives an expression for [I][I][I] in the mechanism A→IA\rightarrow IA→I, I→AI\rightarrow AI→A, and I+B→PI+B\rightarrow PI+B→P.

    Show mark schemeHide mark scheme

    Model answer

    The balance is d[I]dt=k1[A]−k−1[I]−k2[I][B]\frac{d[I]}{dt}=k_1[A]-k_{-1}[I]-k_2[I][B]dtd[I]​=k1​[A]−k−1​[I]−k2​[I][B]. Set it approximately equal to zero and collect terms: k1[A]=[I](k−1+k2[B])k_1[A]=[I](k_{-1}+k_2[B])k1​[A]=[I](k−1​+k2​[B]). Thus, [I]≈k1[A]k−1+k2[B][I]\approx\frac{k_1[A]}{k_{-1}+k_2[B]}[I]≈k−1​+k2​[B]k1​[A]​.

    • 1 mark for writing the formation term k1[A]k_1[A]k1​[A]
    • 1 mark for subtracting both consumption terms, k−1[I]k_{-1}[I]k−1​[I] and k2[I][B]k_2[I][B]k2​[I][B]
    • 1 mark for setting the balance approximately to zero and solving for [I][I][I]
  4. 4.Determine[3 marks]

    Determine the product formation rate law for that mechanism using steady state.

    Show mark schemeHide mark scheme

    Model answer

    The product-forming step gives d[P]dt=k2[I][B]\frac{d[P]}{dt}=k_2[I][B]dtd[P]​=k2​[I][B]. Steady state gives [I]≈k1[A]k−1+k2[B][I]\approx\frac{k_1[A]}{k_{-1}+k_2[B]}[I]≈k−1​+k2​[B]k1​[A]​. Substitution yields d[P]dt=k1k2[A][B]k−1+k2[B]\frac{d[P]}{dt}=\frac{k_1k_2[A][B]}{k_{-1}+k_2[B]}dtd[P]​=k−1​+k2​[B]k1​k2​[A][B]​.

    • 1 mark for identifying k2[I][B]k_2[I][B]k2​[I][B] as the product formation rate
    • 1 mark for using the steady-state expression for [I][I][I]
    • 1 mark for giving the simplified rate law without [I][I][I]
  5. 5.Calculate[3 marks]

    Calculate the product formation rate when k1=0.020 s−1k_1=0.020\,\mathrm{s^{-1}}k1​=0.020s−1, k−1=0.30 s−1k_{-1}=0.30\,\mathrm{s^{-1}}k−1​=0.30s−1, k2=0.50 L mol−1 s−1k_2=0.50\,\mathrm{L\,mol^{-1}\,s^{-1}}k2​=0.50Lmol−1s−1, [A]=0.40 mol L−1[A]=0.40\,\mathrm{mol\,L^{-1}}[A]=0.40molL−1, and [B]=0.20 mol L−1[B]=0.20\,\mathrm{mol\,L^{-1}}[B]=0.20molL−1.

    Show mark schemeHide mark scheme

    Model answer

    k−1+k2[B]=0.40 s−1k_{-1}+k_2[B]=0.40\,\mathrm{s^{-1}}k−1​+k2​[B]=0.40s−1, so [I]≈0.020 mol L−1[I]\approx0.020\,\mathrm{mol\,L^{-1}}[I]≈0.020molL−1. Therefore, d[P]dt=k2[I][B]=0.0020 mol L−1 s−1\frac{d[P]}{dt}=k_2[I][B]=0.0020\,\mathrm{mol\,L^{-1}\,s^{-1}}dtd[P]​=k2​[I][B]=0.0020molL−1s−1.

    • 1 mark for calculating the denominator as 0.40 s−10.40\,\mathrm{s^{-1}}0.40s−1
    • 1 mark for calculating [I][I][I] as 0.020 mol L−10.020\,\mathrm{mol\,L^{-1}}0.020molL−1
    • 1 mark for calculating the product formation rate as 0.0020 mol L−1 s−10.0020\,\mathrm{mol\,L^{-1}\,s^{-1}}0.0020molL−1s−1

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Identify[1 mark]

A proposed mechanism contains the elementary steps R→IR \rightarrow IR→I, I→SI \rightarrow SI→S, and I+T→UI+T \rightarrow UI+T→U. Which expression gives the total rate of consumption of III?
Show answer and explanation

Answer: B · Worked explanation

Both the second and third elementary steps consume III, so their rates, k2[I]k_2[I]k2​[I] and k3[I][T]k_3[I][T]k3​[I][T], must be added to obtain its total consumption rate. The expression k1[R]−k2[I]−k3[I][T]k_1[R]-k_2[I]-k_3[I][T]k1​[R]−k2​[I]−k3​[I][T] is the net rate of change of III, not its total consumption rate.
3.

Easy·State[1 mark]

Under the steady-state approximation, what is assumed about the concentration of an intermediate during the period being analyzed?
Show answer and explanation

Answer: C · Worked explanation

The steady-state approximation treats the intermediate’s rate of concentration change as approximately zero, so its concentration is nearly constant over the period considered. This does not require the concentration itself to be zero; the intermediate can remain present while formation and consumption nearly balance.
4.

Easy·Determine[1 mark]

For the mechanism M→IM \rightarrow IM→I followed by I→NI \rightarrow NI→N, the second step is the only pathway that consumes III. Which rate represents formation of NNN?
Show answer and explanation

Answer: B · Worked explanation

Because NNN is formed in the elementary step I→NI \rightarrow NI→N, its formation rate is the rate of that step, k2[I]k_2[I]k2​[I]. The expression k1[M]−k2[I]k_1[M]-k_2[I]k1​[M]−k2​[I] instead describes the net rate of change of III for this two-step mechanism.
5.

Medium·Write[2 marks]

For the elementary steps C→JC \rightarrow JC→J with rate constant k1k_1k1​, J→CJ \rightarrow CJ→C with rate constant k−1k_{-1}k−1​, and J+D→QJ+D \rightarrow QJ+D→Q with rate constant k2k_2k2​, which equation is the steady-state condition for JJJ?
Show answer and explanation

Answer: D · Worked explanation

The first step forms JJJ, while both other steps consume it, giving d[J]/dt=k1[C]−k−1[J]−k2[J][D]d[J]/dt=k_1[C]-k_{-1}[J]-k_2[J][D]d[J]/dt=k1​[C]−k−1​[J]−k2​[J][D]. Setting this net rate approximately to zero gives the steady-state condition. The tempting plus sign on the reverse-step term is incorrect because J→CJ \rightarrow CJ→C removes, rather than forms, JJJ.
6.

Medium·Calculate[2 marks]

For E→IE \rightarrow IE→I at a rate of 0.12 M s−10.12\,\text{M s}^{-1}0.12M s−1, I→EI \rightarrow EI→E with k−1=0.40 s−1k_{-1}=0.40\,\text{s}^{-1}k−1​=0.40s−1, and I+F→GI+F \rightarrow GI+F→G with k2=1.0 M−1s−1k_2=1.0\,\text{M}^{-1}\text{s}^{-1}k2​=1.0M−1s−1, estimate [I][I][I] at steady state when [F]=0.10 M[F]=0.10\,\text{M}[F]=0.10M.
Show answer and explanation

Answer: B · Worked explanation

At steady state, the formation rate equals the total consumption rate: 0.12=[I](0.40+1.0(0.10))0.12=[I](0.40+1.0(0.10))0.12=[I](0.40+1.0(0.10)). Thus [I]=0.12/0.50=0.24 M[I]=0.12/0.50=0.24\,\text{M}[I]=0.12/0.50=0.24M. The value 0.30 M0.30\,\text{M}0.30M results from dividing by k−1k_{-1}k−1​ alone and neglecting consumption of III in the product-forming step.
7.

Medium·Determine[2 marks]

A mechanism is L→IL \rightarrow IL→I with rate constant k1k_1k1​, I→LI \rightarrow LI→L with rate constant k−1k_{-1}k−1​, and I+M→PI+M \rightarrow PI+M→P with rate constant k2k_2k2​. Using steady state for III, determine the product formation rate law.
Show answer and explanation

Answer: C · Worked explanation

The intermediate balance gives [I]=k1[L]/(k−1+k2[M])[I]=k_1[L]/(k_{-1}+k_2[M])[I]=k1​[L]/(k−1​+k2​[M]), because both steps that remove III contribute to the denominator. Multiplying this expression by the product-forming rate factor k2[M]k_2[M]k2​[M] gives the selected law. The denominator must involve [M][M][M], not [L][L][L], because MMM is the reactant in the competing consumption step.
8.

Medium·Compare[2 marks]

For the rate law d[P]dt=k1k2[A][B]k−1+k2[B]\dfrac{d[P]}{dt}=\dfrac{k_1k_2[A][B]}{k_{-1}+k_2[B]}dtd[P]​=k−1​+k2​[B]k1​k2​[A][B]​, consider conditions where k−1k_{-1}k−1​ is much larger than k2[B]k_2[B]k2​[B]. Which dependence on [B][B][B] is expected approximately?
Show answer and explanation

Answer: C · Worked explanation

When k−1k_{-1}k−1​ dominates the denominator, the denominator is approximately constant, so the rate is approximately (k1k2/k−1)[A][B](k_1k_2/k_{-1})[A][B](k1​k2​/k−1​)[A][B]. The rate is therefore proportional to [B][B][B] under these conditions. Independence from [B][B][B] is the other limiting behavior, reached when k2[B]k_2[B]k2​[B] dominates instead.
9.

Medium·Calculate[2 marks]

For A→IA \rightarrow IA→I, I→AI \rightarrow AI→A, and I+B→PI+B \rightarrow PI+B→P, let k1=0.030 s−1k_1=0.030\,\text{s}^{-1}k1​=0.030s−1, k−1=0.20 s−1k_{-1}=0.20\,\text{s}^{-1}k−1​=0.20s−1, k2=0.80 M−1s−1k_2=0.80\,\text{M}^{-1}\text{s}^{-1}k2​=0.80M−1s−1, [A]=0.50 M[A]=0.50\,\text{M}[A]=0.50M, and [B]=0.25 M[B]=0.25\,\text{M}[B]=0.25M. What is the steady-state product formation rate?
Show answer and explanation

Answer: D · Worked explanation

k2[B]=0.80(0.25)=0.20 s−1k_2[B]=0.80(0.25)=0.20\,\text{s}^{-1}k2​[B]=0.80(0.25)=0.20s−1, so [I]=0.030(0.50)/(0.20+0.20)=0.0375 M[I]=0.030(0.50)/(0.20+0.20)=0.0375\,\text{M}[I]=0.030(0.50)/(0.20+0.20)=0.0375M. Therefore, d[P]/dt=k2[I][B]=0.80(0.0375)(0.25)=0.0075 M s−1d[P]/dt=k_2[I][B]=0.80(0.0375)(0.25)=0.0075\,\text{M s}^{-1}d[P]/dt=k2​[I][B]=0.80(0.0375)(0.25)=0.0075M s−1.
10.

Hard·Deduce[2 marks]

An intermediate III is formed in two elementary steps, X→IX \rightarrow IX→I at rate k1[X]k_1[X]k1​[X] and Y→IY \rightarrow IY→I at rate k2[Y]k_2[Y]k2​[Y]. It is consumed in I→ZI \rightarrow ZI→Z at rate k3[I]k_3[I]k3​[I] and I+W→VI+W \rightarrow VI+W→V at rate k4[I][W]k_4[I][W]k4​[I][W]. Which steady-state expression for [I][I][I] follows?
Show answer and explanation

Answer: B · Worked explanation

The balance is d[I]/dt=k1[X]+k2[Y]−k3[I]−k4[I][W]d[I]/dt=k_1[X]+k_2[Y]-k_3[I]-k_4[I][W]d[I]/dt=k1​[X]+k2​[Y]−k3​[I]−k4​[I][W]. Setting it to zero and collecting terms in [I][I][I] gives [I]=(k1[X]+k2[Y])/(k3+k4[W])[I]=(k_1[X]+k_2[Y])/(k_3+k_4[W])[I]=(k1​[X]+k2​[Y])/(k3​+k4​[W]). Both formation pathways add, while both consumption pathways contribute positively to the factor multiplying [I][I][I].

Keep going

Next topic5.10 Multistep reaction energy profilePrevious topic5.8 Reaction mechanism and rate law

More in Unit 5 · Kinetics

  1. 5.3Concentration changes over timeNotes · 10 questions
  2. 5.4Elementary reactionsNotes · 10 questions
  3. 5.5Collision modelNotes · 10 questions
  4. 5.6Reaction energy profileNotes · 10 questions
  5. 5.7Introduction to reaction mechanismsNotes · 10 questions
  6. 5.8Reaction mechanism and rate lawNotes · 10 questions
  7. 5.9Steady-state approximationNotes · 10 questions
  8. 5.10Multistep reaction energy profileNotes · 10 questions
  9. 5.11CatalysisNotes · 10 questions

All AP Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1Steady state balances an intermediate’s formation and consumption
  2. 2Each elementary step contributes to the intermediate’s balance
  3. 3Substitution removes the intermediate from the rate law
  4. 4The derived law applies only when steady state holds
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe