Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Chemistry
  3. ›5 Kinetics
  4. ›5.5 Collision model

AP Chemistry · Unit 5 · Kinetics

5.5 Collision model

Explain how collision energy, orientation, temperature, and concentration affect reaction rate.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Reacting particles must collide to rearrange their bonds
  1. 1Reacting particles must collide to rearrange their bonds
  2. 2Successful collisions need enough energy and suitable orientation
  3. 3Higher temperature increases the share of effective collisions
  4. 4Higher concentration gives reactants more chances to collide
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Reacting particles must collide to rearrange their bonds

For a reaction to occur, reactant particles must meet. A collision brings them close enough for their atoms to interact. During a successful collision, existing bonds can break and new bonds can form. Most collisions do not produce products. The particles may separate unchanged because they lack enough energy or meet in an unsuitable arrangement.

The collision model connects particle behavior to reaction rate. A faster reaction has more successful collisions per unit time, not necessarily more products from each collision. This distinction matters when comparing conditions. Changing the number of encounters can change the rate without changing the chance that any one encounter succeeds.

Key terms · tap one for its definition

collision

A collision is an encounter that brings reactant particles close enough for their atoms to interact.

collision model

The collision model explains reaction rate through the frequency of encounters that have sufficient energy and suitable orientation.

Part 1 done

2

Part 2 of 4: Successful collisions need enough energy and suitable orientation

Colliding particles need sufficient energy to reach the activation energy barrier. This energy allows bonds to stretch or break as atoms rearrange. Particles with less energy usually separate without reacting. Even an energetic collision may fail if the particles meet in the wrong orientation. The atoms that must interact need to approach in a suitable arrangement.

For example, a reaction involving one end of a molecule requires another reactant to approach that end. A collision with the opposite end may not lead to products. Energy and orientation are separate requirements: meeting one does not guarantee the other.

Figure 1. Particles can collide without forming products. Both collision energy and the approach of the reacting ends matter.

Common mistake

Not every collision causes a reaction. It must have both enough energy and a suitable orientation.

Key terms · tap one for its definition

activation energy

Activation energy is the minimum energy needed for colliding reactants to reach the barrier to reaction.

orientation

Orientation is the arrangement of reactant particles as they approach one another during a collision.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the event in which atoms in reactant particles are brought close enough to interact and potentially rearrange their bonds.
Show answer and explanation

Answer: D · Worked explanation

A collision brings reactant particles close enough for their atoms to interact, which can allow existing bonds to break and new bonds to form. An increase in product concentration occurs after products form; it is not the encounter that enables the reaction.
3

Part 3 of 4: Higher temperature increases the share of effective collisions

At a higher temperature, particles have greater average kinetic energy. They generally move faster and collide more often. More importantly, a larger fraction of collisions have enough energy to overcome the activation energy barrier. The number of successful collisions per unit time therefore usually rises, increasing the reaction rate.

Particles do not all have the same kinetic energy at one temperature. Some can react even at a lower temperature, while others cannot. Raising temperature does not lower the activation energy barrier. It changes how many particles have enough energy to reach it.

Exam tip

When explaining temperature, mention the larger fraction of collisions with sufficient energy. Faster collisions alone are not the full explanation.

Part 3 done

4

Part 4 of 4: Higher concentration gives reactants more chances to collide

Concentration describes how much of a substance is present in a given volume. Increasing a reactant’s concentration places more of its particles in that volume. Reactant particles then encounter one another more often. If other conditions stay the same, successful collisions usually occur more often. The reaction rate rises.

Concentration mainly changes how often particles collide. It does not, by itself, give each collision more energy or improve its orientation. For gases, compression can similarly increase collision frequency by placing particles closer together. The effect of changing a particular reactant’s concentration depends on the reaction. The collision model explains why more available particles can increase the rate.

Key term

concentration

Concentration is the amount of a substance present per unit volume.

Note read

Check your recall[13 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[1 mark]

    State what must happen before reactant particles can rearrange their bonds.

    Show mark schemeHide mark scheme

    Model answer

    The reactant particles must collide.

    • 1 mark for stating that the reactant particles must collide
  2. 2.Explain[2 marks]

    Explain why a collision can fail even when its energy is sufficient.

    Show mark schemeHide mark scheme

    Model answer

    The particles may approach in the wrong orientation. The atoms that need to interact then do not meet in a suitable arrangement.

    • 1 mark for identifying an unsuitable orientation
    • 1 mark for explaining that the atoms that must interact do not approach suitably
  3. 3.Explain[3 marks]

    Explain why raising temperature usually increases reaction rate.

    Show mark schemeHide mark scheme

    Model answer

    Particles have greater average kinetic energy and generally collide more often. A larger fraction of collisions have enough energy to overcome the activation energy barrier. Successful collisions therefore occur more often.

    • 1 mark for stating that particles have greater average kinetic energy or generally collide more often
    • 1 mark for stating that a larger fraction of collisions have sufficient energy
    • 1 mark for linking this change to more successful collisions per unit time
  4. 4.Explain[3 marks]

    Explain how increasing a reactant’s concentration can increase reaction rate.

    Show mark schemeHide mark scheme

    Model answer

    More reactant particles occupy the same volume. They collide with other reactant particles more often. This can produce more successful collisions per unit time.

    • 1 mark for stating that more reactant particles occupy a given volume
    • 1 mark for stating that reactant collisions become more frequent
    • 1 mark for linking more frequent collisions to more successful collisions per unit time
  5. 5.Compare[4 marks]

    Compare how temperature and concentration changes affect collisions and their success.

    Show mark schemeHide mark scheme

    Model answer

    Increasing either temperature or concentration can increase collision frequency. Higher temperature also increases the fraction of collisions with enough energy to overcome the activation energy barrier. Higher concentration mainly increases how often particles meet; it does not itself add energy to each collision. Neither change removes the need for a suitable orientation.

    • 1 mark for stating that either increase can raise collision frequency
    • 1 mark for stating that higher temperature increases the fraction of collisions with sufficient energy
    • 1 mark for stating that higher concentration does not itself increase the energy of each collision
    • 1 mark for stating that suitable orientation remains necessary

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Identify[1 mark]

Identify the term for the minimum energy colliding reactants need to reach the barrier to reaction.
Show answer and explanation

Answer: D · Worked explanation

Activation energy is the minimum energy needed for colliding reactants to reach the barrier to reaction. Average kinetic energy describes particle motion, while collision frequency describes how often encounters occur; neither names the energy threshold.
3.

Easy·Identify[1 mark]

Identify what orientation describes in the collision model.
Show answer and explanation

Answer: A · Worked explanation

Orientation refers to the arrangement of reactant particles as they approach during a collision. Average speed, amount per volume, and the energy threshold describe different properties, so none of those definitions captures orientation.
4.

Easy·State[1 mark]

A gas sample contains more reactant particles in the same volume than it did initially. Which quantity has increased?
Show answer and explanation

Answer: C · Worked explanation

Concentration describes the amount of a substance present per unit volume, so more reactant particles in the same volume means higher concentration. This change does not itself raise the activation energy or give each collision more energy.
5.

Medium·Deduce[2 marks]

In two trials, reactant particles collide equally often. In the first trial, 12 collisions per second form products; in the second, 4 do. What can be deduced about the trials?
Show answer and explanation

Answer: D · Worked explanation

Because both trials have the same total collision frequency, the trial producing 12 products-forming collisions per second has a greater fraction of successful collisions. The data do not show that every collision in the first trial succeeds, and they rule out a higher collision frequency there.
6.

Medium·Calculate[2 marks]

A reactant is evenly distributed in a 2.0 L2.0\,\text{L}2.0L container. The amount is increased from 0.40 mol0.40\,\text{mol}0.40mol to 0.80 mol0.80\,\text{mol}0.80mol while the volume and temperature stay constant. By what factor does its concentration increase?
Show answer and explanation

Answer: D · Worked explanation

Concentration is amount per volume: initially it is 0.40 mol/2.0 L=0.20 mol L−10.40\,\text{mol}/2.0\,\text{L}=0.20\,\text{mol L}^{-1}0.40mol/2.0L=0.20mol L−1, and finally it is 0.80 mol/2.0 L=0.40 mol L−10.80\,\text{mol}/2.0\,\text{L}=0.40\,\text{mol L}^{-1}0.80mol/2.0L=0.40mol L−1. The final concentration is twice the initial value; the unchanged volume does not make the concentration stay constant.
7.

Medium·Determine[2 marks]

In a model reaction, the atoms at one end of a molecule must meet another reactant. A collision has enough energy to overcome the activation energy, but the other reactant approaches the molecule’s opposite end. What is the most likely outcome?
Show answer and explanation

Answer: A · Worked explanation

Sufficient energy is only one requirement for a successful collision; the reacting atoms must also approach in a suitable orientation. Here the particles meet at the wrong end, so they are likely to separate unchanged. Sufficient energy does not guarantee products or cause the activation energy to change.
8.

Medium·Explain[2 marks]

A gas reaction is run at the same temperature in two containers. One container has a smaller volume but the same amount of reactant. Explain why the reaction may be faster in the smaller container.
Show answer and explanation

Answer: A · Worked explanation

With the same amount of gas in a smaller volume, particles are closer together and encounter one another more often, so successful collisions may occur more frequently. Compression at the same temperature does not itself increase each particle’s kinetic energy or lower the activation energy.
9.

Medium·Determine[2 marks]

At a fixed temperature, a reaction mixture has 100 collisions per second, of which 5 are successful. After a change, it has 200 collisions per second, with the same fraction successful. How many successful collisions per second occur after the change?
Show answer and explanation

Answer: B · Worked explanation

The successful fraction is 5/100=0.055/100=0.055/100=0.05. Applying that fraction to 200 collisions per second gives 0.05×200=100.05\times200=100.05×200=10 successful collisions per second. The value remains 5 only if the total collision frequency stays unchanged; the question states that it doubles.
10.

Hard·Deduce[2 marks]

In a proposed reaction, particles must collide for bonds to rearrange. Trial X has many collisions, but most have insufficient energy; Trial Y has fewer collisions, but a larger fraction have enough energy and suitable orientation. Which conclusion is justified without knowing the exact number of successful collisions?
Show answer and explanation

Answer: D · Worked explanation

Reaction rate depends on the number of successful collisions per unit time, not simply the total number of collisions or the successful fraction alone. The information gives competing factors but not their combined totals. More collisions in Trial X could offset its smaller successful fraction, so neither trial can be ranked from the data.

Keep going

Next topic5.6 Reaction energy profilePrevious topic5.4 Elementary reactions

More in Unit 5 · Kinetics

  1. 5.1Reaction ratesNotes · 10 questions
  2. 5.2Introduction to rate lawNotes · 10 questions
  3. 5.3Concentration changes over timeNotes · 10 questions
  4. 5.4Elementary reactionsNotes · 10 questions
  5. 5.5Collision modelNotes · 10 questions
  6. 5.6Reaction energy profileNotes · 10 questions
  7. 5.7Introduction to reaction mechanismsNotes · 10 questions
  8. 5.8Reaction mechanism and rate lawNotes · 10 questions
  9. 5.9Steady-state approximationNotes · 10 questions

All AP Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1Reacting particles must collide to rearrange their bonds
  2. 2Successful collisions need enough energy and suitable orientation
  3. 3Higher temperature increases the share of effective collisions
  4. 4Higher concentration gives reactants more chances to collide
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe