Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Chemistry
  3. ›5 Kinetics
  4. ›5.3 Concentration changes over time

AP Chemistry · Unit 5 · Kinetics

5.3 Concentration changes over time

Use integrated rate laws and linear plots to find reaction order, concentration, and half-life.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Zero-order concentration falls at a constant rate
  1. 1Zero-order concentration falls at a constant rate
  2. 2First-order concentration decreases by the same fraction
  3. 3Second-order reactions with rate proportional to [A]2[A]^2[A]2 give a straight reciprocal plot
  4. 4The straight plot identifies the reaction order
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Zero-order concentration falls at a constant rate

An integrated rate law relates reactant concentration to elapsed time. For a zero-order reaction, the rate does not depend on reactant concentration. Its integrated law is [A]t=[A]0−kt[A]_t=[A]_0-kt[A]t​=[A]0​−kt. Here, [A]0[A]_0[A]0​ is the initial concentration, [A]t[A]_t[A]t​ is the concentration at time ttt, and kkk is the rate constant.

A plot of [A][A][A] against time is a straight line. Its slope is −k-k−k, and its vertical intercept is [A]0[A]_0[A]0​. If concentration is measured in mol L−1\mathrm{mol\,L^{-1}}molL−1 and time in seconds, kkk has units of mol L−1 s−1\mathrm{mol\,L^{-1}\,s^{-1}}molL−1s−1. The equation applies while reactant remains; it cannot predict a negative concentration.

Key terms · tap one for its definition

integrated rate law

An integrated rate law expresses reactant concentration as a function of time and the rate constant.

zero-order reaction

A zero-order reaction has a rate independent of the reactant concentration in its rate law.

Part 1 done

2

Part 2 of 4: First-order concentration decreases by the same fraction

For a first-order reaction, the rate is proportional to [A][A][A]. Its integrated law is ln⁡[A]t=ln⁡[A]0−kt\ln[A]_t=\ln[A]_0-ktln[A]t​=ln[A]0​−kt. An equivalent form is [A]t=[A]0e−kt[A]_t=[A]_0e^{-kt}[A]t​=[A]0​e−kt. A plot of ln⁡[A]\ln[A]ln[A] against time is straight, with slope −k-k−k. When time is measured in minutes, kkk has units of min−1\mathrm{min^{-1}}min−1.

The half-life is the time needed for [A][A][A] to reach half its starting value. For first-order reactions, t1/2=ln⁡2kt_{1/2}=\frac{\ln 2}{k}t1/2​=kln2​. It stays the same as concentration falls.

Worked example

Finding concentration and half-life

A first-order reaction starts at 0.800 mol/L. Its rate constant is 0.0200 min−10.0200\,\mathrm{min^{-1}}0.0200min−1. Find the concentration after 50.0 minutes and its half-life.
  1. 1
    Substitute into the integrated law: [A]50.0=(0.800 mol L−1)e−(0.0200 min−1)(50.0 min)[A]_{50.0}=(0.800\,\mathrm{mol\,L^{-1}})e^{-(0.0200\,\mathrm{min^{-1}})(50.0\,\mathrm{min})}[A]50.0​=(0.800molL−1)e−(0.0200min−1)(50.0min).
  2. 2
    Evaluate the exponent: [A]50.0=(0.800 mol L−1)e−1.00=0.294 mol L−1[A]_{50.0}=(0.800\,\mathrm{mol\,L^{-1}})e^{-1.00}=0.294\,\mathrm{mol\,L^{-1}}[A]50.0​=(0.800molL−1)e−1.00=0.294molL−1.
  3. 3
    Calculate half-life: t1/2=0.6930.0200 min−1=34.7 mint_{1/2}=\frac{0.693}{0.0200\,\mathrm{min^{-1}}}=34.7\,\mathrm{min}t1/2​=0.0200min−10.693​=34.7min.

Answer: After 50.0 minutes, [A]=0.294 mol L−1[A]=0.294\,\mathrm{mol\,L^{-1}}[A]=0.294molL−1; the half-life is 34.7 min34.7\,\mathrm{min}34.7min.

Key terms · tap one for its definition

first-order reaction

A first-order reaction has a rate directly proportional to one reactant concentration.

half-life

Half-life is the time required for a reactant concentration to fall to half its current value.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the integrated rate law that relates concentration and time for a first-order reaction in A.
Show answer and explanation

Answer: C · Worked explanation

For a first-order reaction, the integrated rate law is ln⁡[A]t=ln⁡[A]0−kt\ln[A]_t=\ln[A]_0-ktln[A]t​=ln[A]0​−kt, or equivalently [A]t=[A]0e−kt[A]_t=[A]_0e^{-kt}[A]t​=[A]0​e−kt. The zero-order expression [A]t=[A]0−kt[A]_t=[A]_0-kt[A]t​=[A]0​−kt instead describes a constant rate of concentration decrease.
3

Part 3 of 4: Second-order reactions with rate proportional to [A]2[A]^2[A]2 give a straight reciprocal plot

For a second-order reaction whose rate is proportional to [A]2[A]^2[A]2, the integrated law is 1[A]t=1[A]0+kt\frac{1}{[A]_t}=\frac{1}{[A]_0}+kt[A]t​1​=[A]0​1​+kt. Plotting reciprocal concentration, 1/[A]1/[A]1/[A], against time gives a straight line. Its slope is +k+k+k, and its vertical intercept is 1/[A]01/[A]_01/[A]0​.

To find a concentration at a given time, calculate the right-hand side first. Then take its reciprocal. For example, an initial concentration of 1.00 mol L−11.00\,\mathrm{mol\,L^{-1}}1.00molL−1, k=0.500 L mol−1 min−1k=0.500\,\mathrm{L\,mol^{-1}\,min^{-1}}k=0.500Lmol−1min−1, and t=2.00 mint=2.00\,\mathrm{min}t=2.00min give 1/[A]t=2.00 L mol−11/[A]_t=2.00\,\mathrm{L\,mol^{-1}}1/[A]t​=2.00Lmol−1. Therefore, [A]t=0.500 mol L−1[A]_t=0.500\,\mathrm{mol\,L^{-1}}[A]t​=0.500molL−1. With concentration in mol L−1\mathrm{mol\,L^{-1}}molL−1 and time in minutes, kkk has units of L mol−1 min−1\mathrm{L\,mol^{-1}\,min^{-1}}Lmol−1min−1.

Key terms · tap one for its definition

second-order reaction

A second-order reaction in A has a rate proportional to the square of A’s concentration.

reciprocal concentration

Reciprocal concentration is one divided by concentration, written 1/[A]1/[A]1/[A].

Part 3 done

4

Part 4 of 4: The straight plot identifies the reaction order

A linearized plot uses a transformed concentration when the original concentration plot curves. For one reactant, compare plots of [A][A][A], ln⁡[A]\ln[A]ln[A], and 1/[A]1/[A]1/[A] against time. The straight plot identifies which integrated law fits the data. Its slope gives the rate constant, but the sign depends on the law.

Straight-line tests for a reactant A

OrderStraight plotSlopeVertical intercept
Zero[A][A][A] versus time−k-k−k[A]0[A]_0[A]0​
Firstln⁡[A]\ln[A]ln[A] versus time−k-k−kln⁡[A]0\ln[A]_0ln[A]0​
Second1/[A]1/[A]1/[A] versus time+k+k+k1/[A]01/[A]_01/[A]0​
Order
Zero
Straight plot
[A][A][A] versus time
Slope
−k-k−k
Vertical intercept
[A]0[A]_0[A]0​
Order
First
Straight plot
ln⁡[A]\ln[A]ln[A] versus time
Slope
−k-k−k
Vertical intercept
ln⁡[A]0\ln[A]_0ln[A]0​
Order
Second
Straight plot
1/[A]1/[A]1/[A] versus time
Slope
+k+k+k
Vertical intercept
1/[A]01/[A]_01/[A]0​

Common mistake

A curved [A][A][A] plot does not identify first order by itself. Check which transformed plot is straight.

Use the matching law to calculate an unknown concentration. Keep the time units consistent with kkk, and check that the concentration decreases as time passes.

Figure 1. Only one concentration form should give a straight line for a given order. The slope sign also distinguishes the reciprocal plot.

Key term

linearized plot

A linearized plot transforms measured data so a relationship appears as a straight line.

Note read

Check your recall[12 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[1 mark]

    State the integrated rate law for a zero-order reaction in A.

    Show mark schemeHide mark scheme

    Model answer

    [A]t=[A]0−kt[A]_t=[A]_0-kt[A]t​=[A]0​−kt.

    • 1 mark for writing [A]t=[A]0−kt[A]_t=[A]_0-kt[A]t​=[A]0​−kt
  2. 2.Interpret[3 marks]

    Interpret a straight plot of ln⁡[A]\ln[A]ln[A] against time, including its slope and intercept.

    Show mark schemeHide mark scheme

    Model answer

    The reaction is first order in A. The slope is −k-k−k, and the vertical intercept is ln⁡[A]0\ln[A]_0ln[A]0​.

    • 1 mark for identifying first-order behavior in A
    • 1 mark for identifying the slope as −k-k−k
    • 1 mark for identifying the vertical intercept as ln⁡[A]0\ln[A]_0ln[A]0​
  3. 3.Calculate[2 marks]

    Calculate the half-life when a first-order rate constant is 0.0400 min−10.0400\,\mathrm{min^{-1}}0.0400min−1.

    Show mark schemeHide mark scheme

    Model answer

    t1/2=ln⁡2k=0.6930.0400 min−1=17.3 mint_{1/2}=\frac{\ln 2}{k}=\frac{0.693}{0.0400\,\mathrm{min^{-1}}}=17.3\,\mathrm{min}t1/2​=kln2​=0.0400min−10.693​=17.3min.

    • 1 mark for using t1/2=ln⁡2kt_{1/2}=\frac{\ln 2}{k}t1/2​=kln2​
    • 1 mark for calculating 17.3 min17.3\,\mathrm{min}17.3min
  4. 4.Calculate[3 marks]

    Calculate [A][A][A] after 4.00 seconds for a zero-order reaction with [A]0=0.600 mol L−1[A]_0=0.600\,\mathrm{mol\,L^{-1}}[A]0​=0.600molL−1 and k=0.0500 mol L−1 s−1k=0.0500\,\mathrm{mol\,L^{-1}\,s^{-1}}k=0.0500molL−1s−1.

    Show mark schemeHide mark scheme

    Model answer

    [A]t=[A]0−kt=0.600−(0.0500)(4.00)=0.400 mol L−1[A]_t=[A]_0-kt=0.600-(0.0500)(4.00)=0.400\,\mathrm{mol\,L^{-1}}[A]t​=[A]0​−kt=0.600−(0.0500)(4.00)=0.400molL−1.

    • 1 mark for selecting [A]t=[A]0−kt[A]_t=[A]_0-kt[A]t​=[A]0​−kt
    • 1 mark for substituting the given concentration, rate constant, and time
    • 1 mark for calculating 0.400 mol L−10.400\,\mathrm{mol\,L^{-1}}0.400molL−1
  5. 5.Calculate[3 marks]

    Calculate [A][A][A] after 3.00 minutes for a second-order reaction in A with [A]0=1.00 mol L−1[A]_0=1.00\,\mathrm{mol\,L^{-1}}[A]0​=1.00molL−1 and k=1.00 L mol−1 min−1k=1.00\,\mathrm{L\,mol^{-1}\,min^{-1}}k=1.00Lmol−1min−1.

    Show mark schemeHide mark scheme

    Model answer

    1/[A]t=1/[A]0+kt=1.00+3.00=4.00 L mol−11/[A]_t=1/[A]_0+kt=1.00+3.00=4.00\,\mathrm{L\,mol^{-1}}1/[A]t​=1/[A]0​+kt=1.00+3.00=4.00Lmol−1. Therefore, [A]t=0.250 mol L−1[A]_t=0.250\,\mathrm{mol\,L^{-1}}[A]t​=0.250molL−1.

    • 1 mark for selecting 1/[A]t=1/[A]0+kt1/[A]_t=1/[A]_0+kt1/[A]t​=1/[A]0​+kt
    • 1 mark for calculating 1/[A]t=4.00 L mol−11/[A]_t=4.00\,\mathrm{L\,mol^{-1}}1/[A]t​=4.00Lmol−1
    • 1 mark for taking the reciprocal to obtain 0.250 mol L−10.250\,\mathrm{mol\,L^{-1}}0.250molL−1

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Identify[1 mark]

Which plot is linear for a second-order reaction in A, and what is its slope?
Show answer and explanation

Answer: C · Worked explanation

For a second-order reaction in A, plotting reciprocal concentration against time gives a straight line with slope +k+k+k. A negative slope applies to the zero- and first-order linearized plots, not the reciprocal-concentration plot.
3.

Easy·State[1 mark]

State how the half-life of a first-order reaction changes as the reactant concentration decreases.
Show answer and explanation

Answer: A · Worked explanation

The first-order half-life is t1/2=ln⁡2kt_{1/2}=\frac{\ln 2}{k}t1/2​=kln2​, so it depends on the rate constant rather than the starting concentration. The idea that half-life gets shorter as concentration falls is a misconception; for a first-order reaction, successive halvings take equal amounts of time.
4.

Easy·Identify[1 mark]

A plot of [A][A][A] against time is a straight line with a negative slope. Which reaction order does this linear plot identify?
Show answer and explanation

Answer: D · Worked explanation

A straight plot of [A][A][A] against time identifies a zero-order reaction, and its slope is −k-k−k. A first-order reaction instead gives a straight line when ln⁡[A]\ln[A]ln[A] is plotted against time.
5.

Medium·Calculate[2 marks]

A first-order reaction has [A]0=0.500 mol L−1[A]_0=0.500\,\mathrm{mol\,L^{-1}}[A]0​=0.500molL−1, k=0.0300 min−1k=0.0300\,\mathrm{min^{-1}}k=0.0300min−1, and an elapsed time of 20.0 min20.0\,\mathrm{min}20.0min. Calculate [A]t[A]_t[A]t​.
Show answer and explanation

Answer: B · Worked explanation

Use [A]t=[A]0e−kt[A]_t=[A]_0e^{-kt}[A]t​=[A]0​e−kt: [A]t=(0.500)e−(0.0300)(20.0)=(0.500)e−0.600=0.274 mol L−1[A]_t=(0.500)e^{-(0.0300)(20.0)}=(0.500)e^{-0.600}=0.274\,\mathrm{mol\,L^{-1}}[A]t​=(0.500)e−(0.0300)(20.0)=(0.500)e−0.600=0.274molL−1. The value 0.200 mol L−10.200\,\mathrm{mol\,L^{-1}}0.200molL−1 comes from incorrectly subtracting ktktkt from the concentration as if the reaction were zero order.
6.

Medium·Determine[2 marks]

For a reaction, the slope of a straight-line plot of 1/[A]1/[A]1/[A] against time is +0.080 L mol−1 s−1+0.080\,\mathrm{L\,mol^{-1}\,s^{-1}}+0.080Lmol−1s−1. Determine the reaction order and rate constant.
Show answer and explanation

Answer: C · Worked explanation

A linear 1/[A]1/[A]1/[A]-versus-time plot identifies second-order behavior, and its slope equals +k+k+k. Thus k=0.080 L mol−1 s−1k=0.080\,\mathrm{L\,mol^{-1}\,s^{-1}}k=0.080Lmol−1s−1. Assigning first order confuses this plot with the linear plot of ln⁡[A]\ln[A]ln[A] against time.
7.

Medium·Calculate[2 marks]

A first-order reaction has a rate constant of 0.0160 s−10.0160\,\mathrm{s^{-1}}0.0160s−1. Calculate its half-life.
Show answer and explanation

Answer: D · Worked explanation

For a first-order reaction, t1/2=ln⁡2kt_{1/2}=\frac{\ln 2}{k}t1/2​=kln2​. Substitution gives t1/2=0.693/(0.0160 s−1)=43.3 st_{1/2}=0.693/(0.0160\,\mathrm{s^{-1}})=43.3\,\mathrm{s}t1/2​=0.693/(0.0160s−1)=43.3s. The value 62.5 s62.5\,\mathrm{s}62.5s results from using 1/k1/k1/k and omitting the factor ln⁡2\ln 2ln2.
8.

Medium·Calculate[2 marks]

A zero-order reaction has [A]0=0.720 mol L−1[A]_0=0.720\,\mathrm{mol\,L^{-1}}[A]0​=0.720molL−1 and k=0.0120 mol L−1 s−1k=0.0120\,\mathrm{mol\,L^{-1}\,s^{-1}}k=0.0120molL−1s−1. Calculate [A][A][A] after 25.0 s25.0\,\mathrm{s}25.0s.
Show answer and explanation

Answer: C · Worked explanation

Apply the zero-order law, [A]t=[A]0−kt[A]_t=[A]_0-kt[A]t​=[A]0​−kt: [A]t=0.720−(0.0120)(25.0)=0.420 mol L−1[A]_t=0.720-(0.0120)(25.0)=0.420\,\mathrm{mol\,L^{-1}}[A]t​=0.720−(0.0120)(25.0)=0.420molL−1. The value 0.300 mol L−10.300\,\mathrm{mol\,L^{-1}}0.300molL−1 is the amount ktktkt consumed, not the concentration remaining.
9.

Medium·Deduce[2 marks]

Concentration measurements for a reactant produce a curved plot of [A][A][A] against time and a straight plot of ln⁡[A]\ln[A]ln[A] against time. Deduce the reaction order and the slope of the linear plot.
Show answer and explanation

Answer: C · Worked explanation

A straight plot of ln⁡[A]\ln[A]ln[A] against time identifies a first-order reaction, and the integrated law shows that its slope is −k-k−k. A curved concentration-versus-time plot alone does not determine the order; the linear transformed plot provides the identification.
10.

Hard·Determine[2 marks]

For a first-order reaction, a linearized plot has slope −0.0250 min−1-0.0250\,\mathrm{min^{-1}}−0.0250min−1 and vertical intercept ln⁡(0.800)\ln(0.800)ln(0.800), where concentration is measured in mol L−1\mathrm{mol\,L^{-1}}molL−1. Determine [A][A][A] after 40.0 min40.0\,\mathrm{min}40.0min.
Show answer and explanation

Answer: A · Worked explanation

The slope gives k=0.0250 min−1k=0.0250\,\mathrm{min^{-1}}k=0.0250min−1, and the intercept gives [A]0=0.800 mol L−1[A]_0=0.800\,\mathrm{mol\,L^{-1}}[A]0​=0.800molL−1. Then [A]t=[A]0e−kt=(0.800)e−(0.0250)(40.0)=0.294 mol L−1[A]_t=[A]_0e^{-kt}=(0.800)e^{-(0.0250)(40.0)}=0.294\,\mathrm{mol\,L^{-1}}[A]t​=[A]0​e−kt=(0.800)e−(0.0250)(40.0)=0.294molL−1. The initial concentration is not the concentration after 40.0 minutes.

Keep going

Next topic5.4 Elementary reactionsPrevious topic5.2 Introduction to rate law

More in Unit 5 · Kinetics

  1. 5.1Reaction ratesNotes · 10 questions
  2. 5.2Introduction to rate lawNotes · 10 questions
  3. 5.3Concentration changes over timeNotes · 10 questions
  4. 5.4Elementary reactionsNotes · 10 questions
  5. 5.5Collision modelNotes · 10 questions
  6. 5.6Reaction energy profileNotes · 10 questions
  7. 5.7Introduction to reaction mechanismsNotes · 10 questions
  8. 5.8Reaction mechanism and rate lawNotes · 10 questions
  9. 5.9Steady-state approximationNotes · 10 questions

All AP Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1Zero-order concentration falls at a constant rate
  2. 2First-order concentration decreases by the same fraction
  3. 3Second-order reactions with rate proportional to [A]2[A]^2[A]2 give a straight reciprocal plot
  4. 4The straight plot identifies the reaction order
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe