Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Chemistry
  3. ›8 Acids and Bases
  4. ›8.10 Buffer capacity

AP Chemistry · Unit 8 · Acids and Bases

8.10 Buffer capacity

Explain what determines buffer capacity and predict when a buffer stops resisting pH change.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Buffer capacity measures resistance to added acid or base
  1. 1Buffer capacity measures resistance to added acid or base
  2. 2More concentrated buffers resist larger additions
  3. 3The component ratio controls which addition is resisted
  4. 4A depleted component signals that buffering will fail
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Buffer capacity measures resistance to added acid or base

Buffer capacity describes how much strong acid or strong base a buffer can absorb before its pH changes substantially. It depends on the amounts of both buffer components and on how much pH change is allowed. A buffer containing a weak acid and its conjugate base uses the base to consume added acid. It uses the weak acid to consume added base.

Capacity is not a single fixed amount without a stated pH limit. A smaller permitted pH change means a smaller usable capacity. The capacity for added acid can also differ from the capacity for added base. Each depends on the available component that reacts with that addition.

Key terms · tap one for its definition

Buffer capacity

Buffer capacity describes how much strong acid or base a buffer can absorb before a specified substantial pH change.

Conjugate base

A conjugate base is the species formed when an acid loses a proton.

Part 1 done

2

Part 2 of 4: More concentrated buffers resist larger additions

Increasing buffer concentration increases the amounts of weak acid and conjugate base in a fixed volume. More of each component is then available to react. For example, doubling both concentrations in the same volume doubles both initial amounts. The buffer can therefore absorb a larger addition before reaching the same pH limit.

Total buffer amount matters when comparing samples of different volumes. Two buffers can have equal concentrations but different total amounts. The larger sample contains more moles of each component. State whether you are comparing equal volumes or whole samples. An acid addition consumes conjugate base, while a base addition consumes weak acid.

Common mistake

A high concentration does not guarantee unlimited buffering. Either component can be used up by a sufficiently large addition.

Key terms · tap one for its definition

Buffer concentration

Buffer concentration describes the amounts of buffer components per unit volume.

Total buffer amount

Total buffer amount is the combined number of moles of the weak acid and its conjugate base in a sample.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the best description of buffer capacity.
Show answer and explanation

Answer: D · Worked explanation

Buffer capacity describes how much strong acid or strong base a buffer can absorb before its pH changes substantially, with the permitted pH change specified. The amount of conjugate base alone is not enough to describe capacity because added base is consumed by the weak acid, and the usable capacity depends on which component is available.
3

Part 3 of 4: The component ratio controls which addition is resisted

The component ratio compares the amounts of conjugate base and weak acid. With equal amounts, the buffer has similar amounts available to consume added acid and added base. If conjugate base is more plentiful, the buffer can consume more added acid than added base. This holds until a component runs out. If weak acid is more plentiful, the reverse is true.

For a fixed total amount of buffer components, capacity is greatest near equal amounts. This applies to small additions of either acid or base. An unequal ratio favors one direction but leaves less of the other reacting component. This balance matters even when two buffers have the same total concentration.

Key term

Component ratio

The component ratio compares the amount of conjugate base with the amount of weak acid.

Part 3 done

4

Part 4 of 4: A depleted component signals that buffering will fail

Excess strong acid remains after added acid consumes the available conjugate base. Likewise, excess strong base remains after added base consumes the available weak acid. Before either component is fully depleted, the buffer becomes less effective as its ratio grows more uneven. Predict the direction of failure by identifying which component reacts with the addition.

Worked example

Track an acid addition

A buffer contains 0.100 mol weak acid and 0.100 mol conjugate base. What remains after adding 0.080 mol strong acid?
  1. 1
    Added acid consumes conjugate base in a 1:1 mole ratio.
  2. 2
    Conjugate base remaining: 0.100−0.080=0.020 mol0.100-0.080=0.020\ \mathrm{mol}0.100−0.080=0.020 mol.
  3. 3
    Weak acid after reaction: 0.100+0.080=0.180 mol0.100+0.080=0.180\ \mathrm{mol}0.100+0.080=0.180 mol.

Answer: The buffer has 0.020 mol conjugate base and 0.180 mol weak acid remaining.

Exam tip

For a prediction, name the reacting component and compare its initial moles with the moles added. Explain that substantial pH change can occur before complete depletion.

Key term

Excess strong acid

Excess strong acid is added acid left after the available conjugate base has reacted.

Note read

Check your recall[12 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Define[2 marks]

    Define buffer capacity.

    Show mark schemeHide mark scheme

    Model answer

    Buffer capacity describes how much strong acid or base a buffer can absorb before its pH changes substantially.

    • 1 mark for identifying the amount of strong acid or base absorbed
    • 1 mark for linking that amount to a substantial pH change
  2. 2.Explain[2 marks]

    Explain why doubling both buffer component concentrations increases capacity when volume stays constant.

    Show mark schemeHide mark scheme

    Model answer

    Doubling both concentrations doubles the moles of each component. More of each is available to consume added acid or base.

    • 1 mark for stating that the moles of both components double
    • 1 mark for explaining that more reacting component is available for an addition
  3. 3.Compare[3 marks]

    Compare a buffer with equal component amounts to one with more conjugate base, assuming equal total amounts.

    Show mark schemeHide mark scheme

    Model answer

    Equal amounts give a more balanced response to added acid and base. More conjugate base favors added acid because that component consumes acid. It leaves less weak acid available to consume added base.

    • 1 mark for stating that equal amounts give a more balanced response
    • 1 mark for explaining that extra conjugate base favors resistance to added acid
    • 1 mark for explaining that less weak acid reduces resistance to added base
  4. 4.Calculate[2 marks]

    Calculate the conjugate base remaining when 0.060 mol strong acid is added to a buffer containing 0.090 mol conjugate base.

    Show mark schemeHide mark scheme

    Model answer

    The acid consumes conjugate base in a 1:1 mole ratio. The amount remaining is 0.090−0.060=0.030 mol0.090-0.060=0.030\ \mathrm{mol}0.090−0.060=0.030 mol.

    • 1 mark for using a 1:1 mole ratio for the reaction
    • 1 mark for calculating 0.030 mol conjugate base remaining
  5. 5.Predict[3 marks]

    Predict what happens as strong base is added to a buffer until its weak acid is depleted.

    Show mark schemeHide mark scheme

    Model answer

    The weak acid consumes added base. As weak acid becomes scarce, the buffer resists pH change less effectively. Once it is depleted, further strong base remains and the pH rises sharply.

    • 1 mark for identifying weak acid as the component that consumes added base
    • 1 mark for stating that buffering weakens as weak acid becomes scarce
    • 1 mark for stating that further strong base causes a sharp pH rise after depletion

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·State[1 mark]

State what happens to a buffer’s measured capacity if the permitted pH change is made smaller.
Show answer and explanation

Answer: A · Worked explanation

Capacity is measured as the amount of strong acid or base that can be added before reaching the specified pH-change limit. If that limit is made stricter, it is reached after a smaller addition, so the measured usable capacity decreases. The amounts and ratio of the buffer components do not become irrelevant.
3.

Easy·Identify[1 mark]

Identify the buffer component that reacts with added strong acid.
Show answer and explanation

Answer: C · Worked explanation

The conjugate base consumes added strong acid, while the weak acid is the component that consumes added strong base. A buffer’s ability to resist acid addition therefore depends on the amount of conjugate base available. Water alone is not the buffer component responsible for this neutralization.
4.

Easy·Identify[1 mark]

Identify the buffer mixture that has the greatest capacity for small additions of either strong acid or strong base, assuming each mixture has the same total amount of buffer components.
Show answer and explanation

Answer: D · Worked explanation

With equal amounts, neither reacting component is especially scarce: conjugate base is available for added acid, and weak acid is available for added base. For a fixed total amount, this balance gives the greatest capacity for small additions in either direction. An unequal mixture favors one direction but has less of the component needed in the other.
5.

Medium·Determine[2 marks]

Two buffer samples have the same component ratio and the same volume. Sample X contains 0.20 mol total buffer components, and sample Y contains 0.50 mol. For the same permitted pH change, determine which sample can absorb the larger addition before reaching that limit.
Show answer and explanation

Answer: A · Worked explanation

Because the samples have the same volume and component ratio, the sample with more total moles contains more of both reacting components. Sample Y can therefore absorb a larger addition before reaching the same pH-change limit. Matching ratios alone do not make the capacities equal when the total amounts differ.
6.

Medium·Calculate[2 marks]

A buffer contains 0.160 mol conjugate base and 0.110 mol weak acid. A small amount of strong base is added and reacts completely. If the addition is 0.040 mol, calculate the moles of weak acid remaining.
Show answer and explanation

Answer: D · Worked explanation

Added strong base consumes weak acid in a 1:1 mole ratio. The weak acid remaining is 0.110−0.040=0.070 mol0.110-0.040=0.070\,\text{mol}0.110−0.040=0.070mol. The conjugate base amount increases during this reaction; adding the amount of base to the weak acid would incorrectly treat the reacting component as though it were produced.
7.

Medium·Predict[2 marks]

A buffer contains 0.075 mol conjugate base. Which addition would leave no conjugate base available to consume further strong acid, assuming the added acid reacts completely in a 1:1 ratio?
Show answer and explanation

Answer: B · Worked explanation

The conjugate base consumes added strong acid in a 1:1 mole ratio. Adding 0.075 mol acid uses all 0.075 mol of conjugate base, leaving none to react with additional acid. Each smaller amount listed leaves some conjugate base, although the buffer may become less effective before that component is fully depleted.
8.

Medium·Compare[2 marks]

Two buffers contain the same total amount of components in equal volumes. Buffer P has a larger conjugate-base-to-weak-acid ratio than buffer Q. Compare their resistance to small additions of strong acid.
Show answer and explanation

Answer: A · Worked explanation

Conjugate base reacts with added strong acid, so the buffer with more conjugate base available can absorb a larger acid addition before reaching a given pH-change limit. Equal total amounts do not make the buffers equally effective in this direction when their ratios differ. The extra weak acid in Q would instead favor resistance to added base.
9.

Medium·Deduce[2 marks]

A buffer initially contains 0.12 mol weak acid and 0.09 mol conjugate base. After 0.07 mol strong acid is added and reacts completely, deduce the amounts of weak acid and conjugate base remaining.
Show answer and explanation

Answer: C · Worked explanation

Strong acid consumes conjugate base and produces the corresponding weak acid in a 1:1 mole ratio. The conjugate base remaining is 0.09−0.07=0.02 mol0.09-0.07=0.02\,\text{mol}0.09−0.07=0.02mol, and the weak acid becomes 0.12+0.07=0.19 mol0.12+0.07=0.19\,\text{mol}0.12+0.07=0.19mol. Subtracting the acid addition from the weak acid amount reverses which component reacts.
10.

Hard·Determine[2 marks]

A student compares two buffer samples. Sample A is 100 mL with both components at 0.20 M; sample B is 200 mL with both components at 0.10 M. Determine which sample has more total buffer components and whether their capacities should differ solely because of total amount, assuming the same permitted pH change.
Show answer and explanation

Answer: A · Worked explanation

In A, each component has 0.20 mol L−1×0.100 L=0.020 mol0.20\,\text{mol L}^{-1}\times0.100\,\text{L}=0.020\,\text{mol}0.20mol L−1×0.100L=0.020mol; in B, each has 0.10 mol L−1×0.200 L=0.020 mol0.10\,\text{mol L}^{-1}\times0.200\,\text{L}=0.020\,\text{mol}0.10mol L−1×0.200L=0.020mol. Thus both samples have 0.040 mol total and the same ratio. Neither has more total buffer amount, so total amount alone predicts no capacity difference.

Keep going

Next topic8.11 pH and solubilityPrevious topic8.9 Henderson-Hasselbalch equation

More in Unit 8 · Acids and Bases

  1. 8.3Weak acid and base equilibriaNotes · 10 questions
  2. 8.4Acid-base reactions and buffersNotes · 10 questions
  3. 8.5Acid-base titrationsNotes · 10 questions
  4. 8.6Molecular structure of acids and basesNotes · 10 questions
  5. 8.7pH and pKaNotes · 10 questions
  6. 8.8Properties of buffersNotes · 10 questions
  7. 8.9Henderson-Hasselbalch equationNotes · 10 questions
  8. 8.10Buffer capacityNotes · 10 questions
  9. 8.11pH and solubilityNotes · 10 questions

All AP Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1Buffer capacity measures resistance to added acid or base
  2. 2More concentrated buffers resist larger additions
  3. 3The component ratio controls which addition is resisted
  4. 4A depleted component signals that buffering will fail
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe