Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Chemistry
  3. ›8 Acids and Bases
  4. ›8.9 Henderson-Hasselbalch equation

AP Chemistry · Unit 8 · Acids and Bases

8.9 Henderson-Hasselbalch equation

Calculate buffer pH and use pH and pKa to interpret acid–base ratios.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4The Henderson–Hasselbalch equation connects buffer pH to composition
  1. 1The Henderson–Hasselbalch equation connects buffer pH to composition
  2. 2The acid–base ratio shows which form predominates
  3. 3Added strong acid changes the ratio before pH changes
  4. 4The equation works best when both buffer forms remain
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: The Henderson–Hasselbalch equation connects buffer pH to composition

A buffer contains a weak acid, HA, and its conjugate base, A⁻. Their equilibrium gives [A−][HA]=Ka[H+]\frac{[A^-]}{[HA]}=\frac{K_a}{[H^+]}[HA][A−]​=[H+]Ka​​. Taking negative logarithms gives the Henderson–Hasselbalch equation: pH=pKa+log[A−][HA]\text{pH}=\text{p}K_a+\text{log}\frac{[A^-]}{[HA]}pH=pKa​+log[HA][A−]​. Use equilibrium concentrations for the ratio. In typical buffer calculations, the concentrations after mixing closely approximate those equilibrium values.

The logarithm uses a ratio, so its numerator and denominator must have matching units. When both substances share one solution volume, their mole ratio equals their concentration ratio. This makes moles convenient after a reaction changes the buffer composition.

Key terms · tap one for its definition

HA

HA represents a weak acid that can donate a proton to form its conjugate base, A⁻.

conjugate base

A conjugate base is the species formed when an acid loses a proton.

Henderson–Hasselbalch equation

The Henderson–Hasselbalch equation relates buffer pH to pKa and the concentration ratio of conjugate base to weak acid.

Part 1 done

2

Part 2 of 4: The acid–base ratio shows which form predominates

At equal concentrations of acid and conjugate base, their ratio is one. Since the logarithm of one is zero, pH=pKa\text{pH}=\text{p}K_apH=pKa​. If A⁻ exceeds HA, the ratio is greater than one and pH exceeds pKa. If HA exceeds A⁻, pH is below pKa. A tenfold change in the ratio changes pH by one unit.

You can also find a composition ratio from a target pH: [A−][HA]=10pH−pKa\frac{[A^-]}{[HA]}=10^{\text{pH}-\text{p}K_a}[HA][A−]​=10pH−pKa​. This ratio describes the two forms present together, not the amount of either substance alone.

Common mistake

Do not reverse the ratio inside the logarithm. The conjugate base belongs in the numerator.

Key terms · tap one for its definition

equal concentrations

Equal acid and conjugate base concentrations give a base-to-acid ratio of one.

composition ratio

A buffer's composition ratio compares its conjugate base concentration with its weak acid concentration.

Part 2 done

Quick check

One question on the part you just read

Easy

Calculate the pH of a buffer with pKa=5.20\text{p}K_a=5.20pKa​=5.20 and [A−]/[HA]=1.0[A^-]/[HA]=1.0[A−]/[HA]=1.0.
Show answer and explanation

Answer: B · Worked explanation

The Henderson–Hasselbalch equation gives pH=pKa+log([A−]/[HA])\text{pH}=\text{p}K_a+\text{log}([A^-]/[HA])pH=pKa​+log([A−]/[HA]). Here, log(1.0)=0\text{log}(1.0)=0log(1.0)=0, so the pH is 5.20. The tempting value 4.20 would result from subtracting one, but the ratio is not one-tenth.
3

Part 3 of 4: Added strong acid changes the ratio before pH changes

In a buffer reaction, added strong acid consumes conjugate base: A−+H+→HA\text{A}^-+\text{H}^+\rightarrow\text{HA}A−+H+→HA. Added strong base consumes weak acid: HA+OH−→A−+H2O\text{HA}+\text{OH}^-\rightarrow\text{A}^-+\text{H}_2\text{O}HA+OH−→A−+H2​O. First calculate the remaining moles of HA and A⁻. Then use their ratio in the Henderson–Hasselbalch equation, provided both remain in appreciable amounts.

Worked example

Find pH after adding strong acid

A buffer contains 0.100 mol HA and 0.150 mol A⁻. Its pKa is 4.76. Find the pH after adding 0.020 mol HCl.
  1. 1
    HCl supplies 0.020 mol H⁺, which reacts with 0.020 mol A⁻.
  2. 2
    New amounts: HA =0.100+0.020=0.120=0.100+0.020=0.120=0.100+0.020=0.120 mol; A⁻ =0.150−0.020=0.130=0.150-0.020=0.130=0.150−0.020=0.130 mol.
  3. 3
    Calculate pH=4.76+log0.1300.120=4.76+0.035\text{pH}=4.76+\text{log}\frac{0.130}{0.120}=4.76+0.035pH=4.76+log0.1200.130​=4.76+0.035.

Answer: The final pH is 4.79 (unitless).

Exam tip

For added strong acid or base, show the reaction and updated amounts before substituting into the equation.

Key terms · tap one for its definition

buffer reaction

A buffer reaction consumes added strong acid or base by converting one member of a conjugate pair into the other.

remaining moles

Remaining moles are the amounts of each buffer component after reaction with added strong acid or base.

Part 3 done

4

Part 4 of 4: The equation works best when both buffer forms remain

The equation relies on a conjugate pair present together at equilibrium. Its common shortcut assumes that acid dissociation changes the calculated concentrations very little. This is usually reasonable when both buffer components have appreciable concentrations. If added strong acid or base uses up one component, do not take the logarithm of a zero amount. The mixture no longer has the same two-component buffer composition.

Always check the reaction amounts before calculating pH. A stoichiometric check also catches an impossible negative amount. If both components remain, compare the answer with pKa. More A⁻ should give a higher pH; more HA should give a lower pH.

Key terms · tap one for its definition

conjugate pair

A conjugate pair consists of two species that differ by one proton.

stoichiometric check

A stoichiometric check compares reacting mole amounts to determine which substances remain after a reaction.

Note read

Check your recall[11 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Write[1 mark]

    Write the Henderson–Hasselbalch equation for a buffer containing HA and A⁻.

    Show mark schemeHide mark scheme

    Model answer

    pH=pKa+log[A−][HA]\text{pH}=\text{p}K_a+\text{log}\frac{[A^-]}{[HA]}pH=pKa​+log[HA][A−]​.

    • 1 mark for writing the equation with conjugate base over weak acid inside the logarithm
  2. 2.Explain[2 marks]

    Explain why a buffer has pH equal to pKa when its acid and conjugate base concentrations match.

    Show mark schemeHide mark scheme

    Model answer

    The base-to-acid ratio is one. Its logarithm is zero, so pH equals pKa.

    • 1 mark for stating that the concentration ratio equals one
    • 1 mark for stating that the logarithm of one is zero
  3. 3.Determine[2 marks]

    Determine the base-to-acid ratio when a buffer's pH is one unit above its pKa.

    Show mark schemeHide mark scheme

    Model answer

    The ratio is 10pH−pKa=101=1010^{\text{pH}-\text{p}K_a}=10^1=1010pH−pKa​=101=10, so A⁻:HA is 10:1.

    • 1 mark for using the relationship [A−]/[HA]=10pH−pKa[A^-]/[HA]=10^{\text{pH}-\text{p}K_a}[A−]/[HA]=10pH−pKa​
    • 1 mark for giving a base-to-acid ratio of 10:1
  4. 4.Calculate[4 marks]

    Calculate the pH after adding 0.010 mol NaOH to a buffer containing 0.080 mol HA and 0.050 mol A⁻. The pKa is 4.80.

    Show mark schemeHide mark scheme

    Model answer

    OH⁻ consumes HA and forms A⁻. HA falls to 0.070 mol, while A⁻ rises to 0.060 mol. pH=4.80+log(0.060/0.070)=4.73\text{pH}=4.80+\text{log}(0.060/0.070)=4.73pH=4.80+log(0.060/0.070)=4.73.

    • 1 mark for identifying that OH⁻ consumes HA and forms A⁻
    • 1 mark for calculating 0.070 mol HA remaining
    • 1 mark for calculating 0.060 mol A⁻ remaining
    • 1 mark for substituting the updated ratio to obtain pH 4.73
  5. 5.Explain[2 marks]

    Explain why the usual buffer calculation cannot use a zero amount of HA after adding strong base.

    Show mark schemeHide mark scheme

    Model answer

    The strong base has consumed all the HA. The base-to-acid ratio would divide by zero, and the two-component buffer is gone.

    • 1 mark for stating that no weak acid remains after the reaction
    • 1 mark for explaining that the buffer ratio is undefined or the two-component buffer no longer exists

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Identify[1 mark]

A buffer has a pH lower than its pKa. Which statement best describes the relative amounts of its two forms?
Show answer and explanation

Answer: B · Worked explanation

When pH is below pKa, the logarithmic term in the Henderson–Hasselbalch equation is negative, so [A−]/[HA][A^-]/[HA][A−]/[HA] is less than one. Thus HA exceeds A⁻. The tempting claim that A⁻ is greater would make the ratio greater than one and the pH higher than pKa.
3.

Easy·Identify[1 mark]

Which species is the conjugate base in a buffer made from the weak acid HA and its conjugate pair?
Show answer and explanation

Answer: D · Worked explanation

A⁻ is formed when HA loses a proton, so it is the conjugate base of HA. H⁺ is the proton transferred, not the conjugate base, and OH⁻ is a different base species. HA₂ is not the species produced by deprotonating HA.
4.

Easy·Determine[1 mark]

A buffer has pH=6.10\text{pH}=6.10pH=6.10 and pKa=6.10\text{p}K_a=6.10pKa​=6.10. Determine the ratio [A−]/[HA][A^-]/[HA][A−]/[HA].
Show answer and explanation

Answer: B · Worked explanation

Rearranging the Henderson–Hasselbalch equation gives [A−]/[HA]=10pH−pKa[A^-]/[HA]=10^{\text{pH}-\text{p}K_a}[A−]/[HA]=10pH−pKa​. The exponent is zero, so the ratio is 100=110^0=1100=1. A ratio of 10 or 0.10 would instead correspond to a pH one unit above or below pKa.
5.

Medium·Calculate[1 mark]

A buffer has pKa=4.35\text{p}K_a=4.35pKa​=4.35, [A−]=0.24 M[A^-]=0.24\,\text{M}[A−]=0.24M, and [HA]=0.060 M[HA]=0.060\,\text{M}[HA]=0.060M. Calculate its pH.
Show answer and explanation

Answer: C · Worked explanation

The base-to-acid ratio is 0.24/0.060=4.00.24/0.060=4.00.24/0.060=4.0. Therefore, pH=4.35+log(4.0)=4.35+0.60=4.95\text{pH}=4.35+\text{log}(4.0)=4.35+0.60=4.95pH=4.35+log(4.0)=4.35+0.60=4.95. The tempting answer 3.75 comes from reversing the ratio, which incorrectly places HA in the numerator.
6.

Medium·Calculate[2 marks]

A 1.00 L1.00\,\text{L}1.00L solution contains 0.12 mol0.12\,\text{mol}0.12mol HA and 0.30 mol0.30\,\text{mol}0.30mol A⁻. If pKa=3.90\text{p}K_a=3.90pKa​=3.90, calculate the buffer pH.
Show answer and explanation

Answer: B · Worked explanation

Because both components are in the same solution volume, the concentration ratio equals the mole ratio: [A−]/[HA]=0.30/0.12=2.5[A^-]/[HA]=0.30/0.12=2.5[A−]/[HA]=0.30/0.12=2.5. Thus pH=3.90+log(2.5)=3.90+0.40=4.30\text{pH}=3.90+\text{log}(2.5)=3.90+0.40=4.30pH=3.90+log(2.5)=3.90+0.40=4.30. The value 3.50 results from reversing the ratio and making the logarithmic term negative.
7.

Medium·Calculate[2 marks]

A buffer initially contains 0.18 mol0.18\,\text{mol}0.18mol HA and 0.22 mol0.22\,\text{mol}0.22mol A⁻. It is treated with 0.050 mol0.050\,\text{mol}0.050mol HCl, and its pKa\text{p}K_apKa​ is 4.70. Calculate the pH after the reaction.
Show answer and explanation

Answer: B · Worked explanation

H⁺ converts A⁻ into HA, leaving 0.17 mol0.17\,\text{mol}0.17mol A⁻ and 0.23 mol0.23\,\text{mol}0.23mol HA. Thus pH=4.70+log(0.17/0.23)≈4.57\text{pH}=4.70+\text{log}(0.17/0.23)\approx4.57pH=4.70+log(0.17/0.23)≈4.57.
8.

Medium·Determine[1 mark]

A buffer's pH is 0.30 unit above its pKa. Determine the approximate ratio [A−]/[HA][A^-]/[HA][A−]/[HA].
Show answer and explanation

Answer: B · Worked explanation

The ratio is 10pH−pKa=100.30≈2.010^{\text{pH}-\text{p}K_a}=10^{0.30}\approx2.010pH−pKa​=100.30≈2.0, so A⁻ is present at about twice the concentration of HA. The tempting ratio 0.50 reverses the direction: a ratio below one would put pH below pKa, not above it.
9.

Medium·Determine[2 marks]

A buffer contains 0.090 mol0.090\,\text{mol}0.090mol HA and 0.060 mol0.060\,\text{mol}0.060mol A⁻. After 0.020 mol0.020\,\text{mol}0.020mol NaOH is added and reacts completely, determine the approximate new base-to-acid mole ratio.
Show answer and explanation

Answer: B · Worked explanation

OH⁻ consumes HA and forms A⁻. The remaining amounts are 0.070 mol0.070\,\text{mol}0.070mol HA and 0.080 mol0.080\,\text{mol}0.080mol A⁻, giving a base-to-acid ratio of 0.080/0.070≈1.140.080/0.070\approx1.140.080/0.070≈1.14.
10.

Hard·Deduce[2 marks]

A buffer begins with 0.16 mol0.16\,\text{mol}0.16mol HA and 0.11 mol0.11\,\text{mol}0.11mol A⁻. A sample is treated with 0.13 mol0.13\,\text{mol}0.13mol NaOH. What can be deduced about using the Henderson–Hasselbalch equation for the resulting mixture?
Show answer and explanation

Answer: C · Worked explanation

NaOH consumes HA in a 1:1 reaction. After reaction, 0.16−0.13=0.03 mol0.16-0.13=0.03\,\text{mol}0.16−0.13=0.03mol HA remains, and the amount of A⁻ is 0.11+0.13=0.24 mol0.11+0.13=0.24\,\text{mol}0.11+0.13=0.24mol. Both buffer components remain, so their updated ratio can be used.

Keep going

Next topic8.10 Buffer capacityPrevious topic8.8 Properties of buffers

More in Unit 8 · Acids and Bases

  1. 8.3Weak acid and base equilibriaNotes · 10 questions
  2. 8.4Acid-base reactions and buffersNotes · 10 questions
  3. 8.5Acid-base titrationsNotes · 10 questions
  4. 8.6Molecular structure of acids and basesNotes · 10 questions
  5. 8.7pH and pKaNotes · 10 questions
  6. 8.8Properties of buffersNotes · 10 questions
  7. 8.9Henderson-Hasselbalch equationNotes · 10 questions
  8. 8.10Buffer capacityNotes · 10 questions
  9. 8.11pH and solubilityNotes · 10 questions

All AP Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1The Henderson–Hasselbalch equation connects buffer pH to composition
  2. 2The acid–base ratio shows which form predominates
  3. 3Added strong acid changes the ratio before pH changes
  4. 4The equation works best when both buffer forms remain
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe