Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Chemistry
  3. ›8 Acids and Bases
  4. ›8.8 Properties of buffers

AP Chemistry · Unit 8 · Acids and Bases

8.8 Properties of buffers

Identify buffer components and explain how they resist pH changes when acid or base is added.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4A buffer contains a weak acid and its conjugate base
  1. 1A buffer contains a weak acid and its conjugate base
  2. 2The conjugate base removes much of an added acid
  3. 3The weak acid removes much of an added base
  4. 4Buffering works only while both components remain available
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: A buffer contains a weak acid and its conjugate base

A buffer is a solution that resists large pH changes. This holds when small amounts of acid or base are added. One common pair is a weak acid and its conjugate base. The acid can react with added base. Its conjugate base can react with added acid. Both components must be present in appreciable amounts.

For example, a solution containing acetic acid, CH3COOH\mathrm{CH_3COOH}CH3​COOH, and acetate, CH3COO−\mathrm{CH_3COO^-}CH3​COO−, is a buffer. Acetate can come from a soluble acetate salt. A weak base and its conjugate acid can also form a buffer. A strong acid mixed only with its salt does not provide the same pair of weak, reversible reactants.

Key terms · tap one for its definition

buffer

A buffer is a solution that resists large pH changes when small amounts of acid or base are added.

weak acid

A weak acid donates protons but ionizes only partially in water.

conjugate base

A conjugate base is the species formed when an acid donates a proton.

Part 1 done

2

Part 2 of 4: The conjugate base removes much of an added acid

When acid is added to an acetate buffer, added H3O+\mathrm{H_3O^+}H3​O+ reacts with acetate. The reaction forms acetic acid and water: CH3COO−+H3O+→CH3COOH+H2O\mathrm{CH_3COO^- + H_3O^+ \rightarrow CH_3COOH + H_2O}CH3​COO−+H3​O+→CH3​COOH+H2​O. The neutralization converts much of the added acid into a weak acid. Therefore, the hydronium ion concentration changes less than it would in unbuffered water.

The amount of acetate decreases, while the amount of acetic acid increases. The pH still falls slightly. A buffer resists a pH change; it does not prevent one. This response depends on having enough conjugate base available to react.

Figure 1. Each added substance reacts with a different buffer component. The amounts of acetic acid and acetate change.

Key term

neutralization

Neutralization is an acid-base reaction in which a proton transfers from an acid to a base.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the pair that can form a buffer when both substances are present in appreciable amounts.
Show answer and explanation

Answer: C · Worked explanation

A weak acid and its conjugate base can react with small additions of base and acid, respectively, so together they resist large pH changes. A strong acid and its conjugate base do not provide the same weak, reversible pair; the conjugate base of a strong acid is not an effective reactant for added acid.
3

Part 3 of 4: The weak acid removes much of an added base

When base is added, the weak acid supplies a proton to OH−\mathrm{OH^-}OH−. In an acetate buffer, CH3COOH+OH−→CH3COO−+H2O\mathrm{CH_3COOH + OH^- \rightarrow CH_3COO^- + H_2O}CH3​COOH+OH−→CH3​COO−+H2​O. This reaction turns much of the added strong base into water. The acetic acid amount decreases, and the acetate amount increases. The pH rises slightly rather than sharply.

Common mistake

The conjugate base does not remove added OH−\mathrm{OH^-}OH−. The weak acid reacts with it.

The two buffer components have different jobs. The conjugate base handles added acid, while the weak acid handles added base. These reactions explain why both components must remain available.

Part 3 done

4

Part 4 of 4: Buffering works only while both components remain available

A buffer maintains a relatively stable pH because added acid or base mostly changes the amounts of its two components. The added acid or base reacts with a buffer component. Adding acid shifts some conjugate base into weak acid. Adding base shifts some weak acid into conjugate base. In either case, the balance changes, so the pH also changes somewhat.

If too much acid is added, the supply of conjugate base can run low. If too much base is added, the weak acid can run low. Further additions then cause larger pH changes. A buffer therefore works over a limited range of additions.

Exam tip

To explain a buffer response, name the component that reacts, its product, and the direction of the pH change.

Note read

Check your recall[13 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Identify[2 marks]

    Identify the two components of an acetic acid buffer.

    Show mark schemeHide mark scheme

    Model answer

    Its components are acetic acid, CH3COOH\mathrm{CH_3COOH}CH3​COOH, and acetate, CH3COO−\mathrm{CH_3COO^-}CH3​COO−.

    • 1 mark for identifying acetic acid as the weak acid
    • 1 mark for identifying acetate as its conjugate base
  2. 2.Explain[3 marks]

    Explain how an acetate buffer responds when a small amount of acid is added.

    Show mark schemeHide mark scheme

    Model answer

    Acetate reacts with added H3O+\mathrm{H_3O^+}H3​O+ to form acetic acid and water. This removes much of the added hydronium ion, so the pH falls only slightly.

    • 1 mark for identifying acetate as the reacting buffer component
    • 1 mark for stating that acetate reacts with hydronium ion to form acetic acid and water
    • 1 mark for explaining that the pH falls only slightly because much of the added hydronium ion reacts
  3. 3.Explain[3 marks]

    Explain how an acetate buffer responds when a small amount of base is added.

    Show mark schemeHide mark scheme

    Model answer

    Acetic acid reacts with added OH−\mathrm{OH^-}OH− to form acetate and water. This removes much of the added hydroxide ion, so the pH rises only slightly.

    • 1 mark for identifying acetic acid as the reacting buffer component
    • 1 mark for stating that acetic acid reacts with hydroxide ion to form acetate and water
    • 1 mark for explaining that the pH rises only slightly because much of the added hydroxide ion reacts
  4. 4.Explain[3 marks]

    Explain why repeated large additions of acid eventually cause a sharp pH drop in a buffer.

    Show mark schemeHide mark scheme

    Model answer

    Added acid converts the conjugate base into weak acid. Eventually, too little conjugate base remains to react with more added acid. The hydronium ion concentration then increases more sharply, causing a larger pH drop.

    • 1 mark for stating that added acid consumes the conjugate base
    • 1 mark for stating that too little conjugate base eventually remains to react
    • 1 mark for linking the resulting increase in hydronium ion concentration to a larger pH drop
  5. 5.Describe[2 marks]

    Describe why a buffer's pH can still change after acid or base is added.

    Show mark schemeHide mark scheme

    Model answer

    The addition changes the amounts of weak acid and conjugate base. Their changed balance causes a small pH change, even though the buffer resists a large one.

    • 1 mark for stating that the amounts of weak acid and conjugate base change
    • 1 mark for linking their changed balance to a pH change

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Identify[1 mark]

Identify the statement that best describes the pH behavior of a buffer after a small addition of acid or base.
Show answer and explanation

Answer: D · Worked explanation

A buffer limits, but does not eliminate, the pH change caused by a small addition of acid or base. Its components react with much of the added substance, reducing the change in hydronium or hydroxide concentration. The tempting claim that pH stays exactly constant is incorrect because the amounts of the buffer components change.
3.

Easy·Identify[1 mark]

Identify the buffer component that directly reacts with added hydroxide ions in an acetic acid–acetate buffer.
Show answer and explanation

Answer: D · Worked explanation

Acetic acid donates a proton to added hydroxide ions, producing acetate ions and water. Acetate is the component that handles added acid, not added hydroxide; confusing the two components' roles is a common mistake.
4.

Easy·Identify[1 mark]

Which solution contains the two components needed for an acetic acid–acetate buffer?
Show answer and explanation

Answer: A · Worked explanation

Acetic acid is the weak acid, and a soluble acetate salt supplies its conjugate base, acetate. Hydrochloric acid with sodium chloride does not provide a weak-acid/conjugate-base pair; sodium chloride is not the conjugate base of hydrochloric acid in a way that effectively removes added acid.
5.

Medium·Compare[2 marks]

Equal small amounts of hydrochloric acid are added to equal volumes of pure water and an acetate buffer. Which comparison is expected?
Show answer and explanation

Answer: B · Worked explanation

Acetate reacts with much of the added hydronium ion to form acetic acid and water, so the buffer's hydronium concentration increases less than the water's. Therefore, the water undergoes the larger pH decrease. The same amount of acid added does not guarantee the same pH change, because the buffer has components that consume some of it.
6.

Medium·Determine[2 marks]

A small amount of sodium hydroxide is added to an acetic acid–acetate buffer. Determine which change in the buffer components follows the reaction.
Show answer and explanation

Answer: B · Worked explanation

Acetic acid reacts with hydroxide ions to form acetate and water, so acetic acid is consumed and acetate is produced. The pH rises only modestly while the weak acid remains available to react. The opposite change would describe acetate reacting with added acid, not acetic acid reacting with added base.
7.

Medium·Deduce[2 marks]

A buffer contains 0.30 mol of acetic acid and 0.25 mol of acetate. A small amount of strong acid is added and reacts completely with the buffer. Deduce the direction of the changes in the component amounts.
Show answer and explanation

Answer: D · Worked explanation

Added hydronium ions react with acetate to form acetic acid and water, so acetate decreases while acetic acid increases. The initial amounts do not change which component reacts; they indicate how much capacity the buffer may have. The reverse direction would occur when base reacts with acetic acid.
8.

Medium·Calculate[2 marks]

A sample contains 0.20 mol of acetate ions. It receives 0.060 mol of hydronium ions, which react completely with acetate. Calculate the amount of acetate remaining.
Show answer and explanation

Answer: C · Worked explanation

The reaction consumes acetate and hydronium in a 1:1 mole ratio. Thus, the acetate remaining is 0.20 mol−0.060 mol=0.14 mol0.20\,\text{mol} - 0.060\,\text{mol} = 0.14\,\text{mol}0.20mol−0.060mol=0.14mol. The value 0.26 mol0.26\,\text{mol}0.26mol would result from adding the amounts, even though acetate is being consumed.
9.

Medium·Explain[2 marks]

A buffer receives a small addition of base, and the amount of weak acid decreases while the amount of conjugate base increases. Explain why the pH change is limited.
Show answer and explanation

Answer: D · Worked explanation

The weak acid donates protons to hydroxide ions, forming water and additional conjugate base. This removes much of the added base, so the pH rises less than it would without the buffer, although it can still change. The conjugate base does not remove hydroxide; that component reacts with added acid.
10.

Hard·Deduce[2 marks]

Two equal-volume solutions each contain 0.10 mol of weak acid. Solution X also contains 0.10 mol of its conjugate base; solution Y contains no conjugate base. Small amounts of strong acid are added to both. Deduce which solution better resists the pH change and why.
Show answer and explanation

Answer: A · Worked explanation

Solution X has both members of a buffer pair, so its conjugate base can consume much of the added hydronium ion and form weak acid. Solution Y lacks that acid-removing component and therefore cannot resist added acid as effectively. The weak acid is not the component that neutralizes added hydronium; it donates protons when base is added.

Keep going

Next topic8.9 Henderson-Hasselbalch equationPrevious topic8.7 pH and pKa

More in Unit 8 · Acids and Bases

  1. 8.3Weak acid and base equilibriaNotes · 10 questions
  2. 8.4Acid-base reactions and buffersNotes · 10 questions
  3. 8.5Acid-base titrationsNotes · 10 questions
  4. 8.6Molecular structure of acids and basesNotes · 10 questions
  5. 8.7pH and pKaNotes · 10 questions
  6. 8.8Properties of buffersNotes · 10 questions
  7. 8.9Henderson-Hasselbalch equationNotes · 10 questions
  8. 8.10Buffer capacityNotes · 10 questions
  9. 8.11pH and solubilityNotes · 10 questions

All AP Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1A buffer contains a weak acid and its conjugate base
  2. 2The conjugate base removes much of an added acid
  3. 3The weak acid removes much of an added base
  4. 4Buffering works only while both components remain available
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe