Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Chemistry
  3. ›8 Acids and Bases
  4. ›8.5 Acid-base titrations

AP Chemistry · Unit 8 · Acids and Bases

8.5 Acid-base titrations

Interpret acid-base titration curves, locate equivalence points, and calculate unknown concentrations from titration data.

  • 4 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4A titration curve tracks pH as titrant is added
  1. 1A titration curve tracks pH as titrant is added
  2. 2Equivalence occurs at the required mole ratio
  3. 3Acid and base strength shapes the curve
  4. 4Equivalence volume reveals an unknown concentration
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: A titration curve tracks pH as titrant is added

In an acid-base titration, a solution of known concentration is added to a measured sample. The added solution is the titrant. A titration curve plots the sample’s pH against the volume of titrant added. Its direction depends on the titrant: adding base raises pH, while adding acid lowers it.

Near the required mole ratio, a small addition often causes a large pH change. The curve changes steeply there. Farther from that region, pH changes more gradually. Always check the axis labels before interpreting a curve. The same pH can occur at very different stages of different titrations.

Key terms · tap one for its definition

titrant

The titrant is the solution added in measured amounts to the sample during a titration.

titration curve

A titration curve shows how the sample’s pH changes as a measured volume of titrant is added.

Part 1 done

2

Part 2 of 4: Equivalence occurs at the required mole ratio

The equivalence point occurs when the added acid and initial base have reacted in their stoichiometric ratio. The same applies when base is added to acid. On a curve, it lies at the inflection point in the steep region. Read its volume from the horizontal axis. Equivalence does not necessarily mean pH 7.

An endpoint is an observed signal used to stop a titration, such as an indicator changing color. It should occur close to equivalence, but the two are not identical. Choose an indicator whose color-change range falls within the steep region. A pH probe can instead provide readings across the whole curve.

Common mistake

Do not identify equivalence by looking for pH 7 alone. Locate the curve’s inflection point, then consider which acid and base reacted.

Key terms · tap one for its definition

equivalence point

The equivalence point is where the acid and base have reacted in the mole ratio given by their balanced reaction.

endpoint

An endpoint is an observed change used to signal when to stop a titration.

Part 2 done

Quick check

One question on the part you just read

Easy

A titration curve starts at a low pH and rises as more solution is added. Which solution is being added to the sample?
Show answer and explanation

Answer: D · Worked explanation

Adding a base to an acidic sample raises the pH, so the curve rises as titrant volume increases. Adding acid would lower the pH; a neutral salt solution would not produce the characteristic upward change described.
3

Part 3 of 4: Acid and base strength shapes the curve

Now that equivalence is clear, compare the pH at that point. A strong acid–strong base titration has an equivalence pH of 7 at 25 °C. Neither resulting ion reacts appreciably with water. A weak acid titrated with strong base has a basic equivalence solution. Its conjugate base reacts with water to produce hydroxide ions. A weak base titrated with strong acid has an acidic equivalence solution.

Before equivalence, a weak acid and its conjugate base form a buffer region. At the half-equivalence point, half the initial acid has reacted. The weak acid and conjugate base have equal concentrations, so pH=pKa\mathit{pH}=\mathit{p}K_apH=pKa​. Read the equivalence volume first, then find half that volume on the horizontal axis. The pH there gives pKa\mathit{p}K_apKa​.

Figure 1. Both curves reach equivalence at the same added volume. The weak acid curve has a gradual buffer region and an equivalence pH above 7.

Exam tip

For a weak base titrated with strong acid, half-equivalence gives pOH=pKb\mathit{pOH}=\mathit{p}K_bpOH=pKb​, not pH=pKb\mathit{pH}=\mathit{p}K_bpH=pKb​.

Key terms · tap one for its definition

strong acid–strong base titration

A titration between a strong acid and a strong base has equivalence pH 7 at 25 °C.

buffer region

A buffer region contains appreciable amounts of a weak acid or base and its conjugate partner, limiting pH changes.

half-equivalence point

The half-equivalence point occurs when the added titrant volume is half the equivalence volume.

Part 3 done

4

Part 4 of 4: Equivalence volume reveals an unknown concentration

Use the balanced reaction to connect moles of titrant to moles in the original sample. Calculate titrant moles with molarity, using volume in liters. Then apply the reaction’s mole ratio and divide sample moles by sample volume. For a one-to-one reaction, the moles of acid and base are equal at equivalence. That shortcut does not apply to every reaction.

Worked example

Find the concentration of an acid

A 25.0 mL sample of HCl\mathrm{HCl}HCl reaches equivalence after 20.0 mL of 0.100 M NaOH\mathrm{NaOH}NaOH is added. Find the acid concentration.
  1. 1
    Convert titrant volume: 20.0 mL=0.0200 L20.0\mathrm{\,mL}=0.0200\mathrm{\,L}20.0mL=0.0200L.
  2. 2
    Find base moles: n=CV=(0.100 mol L−1)(0.0200 L)=0.00200 moln=CV=(0.100\mathrm{\,mol\,L^{-1}})(0.0200\mathrm{\,L})=0.00200\mathrm{\,mol}n=CV=(0.100molL−1)(0.0200L)=0.00200mol.
  3. 3
    Use the one-to-one reaction: n(HCl)=0.00200 moln(\mathrm{HCl})=0.00200\mathrm{\,mol}n(HCl)=0.00200mol.
  4. 4
    Find acid concentration: C=0.00200 mol0.0250 L=0.0800 mol L−1C=\frac{0.00200\mathrm{\,mol}}{0.0250\mathrm{\,L}}=0.0800\mathrm{\,mol\,L^{-1}}C=0.0250L0.00200mol​=0.0800molL−1.

Answer: The HCl\mathrm{HCl}HCl concentration is 0.0800 mol L−10.0800\mathrm{\,mol\,L^{-1}}0.0800molL−1.

Exam tip

Use the volume at equivalence, not an arbitrary point on the curve. Check the balanced equation before setting acid moles equal to base moles.

Key term

molarity

Molarity is the amount of dissolved solute, in moles, divided by solution volume in liters.

Note read

Check your recall[11 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Identify[1 mark]

    Identify the point on a titration curve that gives the equivalence volume.

    Show mark schemeHide mark scheme

    Model answer

    It is the inflection point in the steep region.

    • 1 mark for identifying the inflection point in the steep region
  2. 2.Explain[2 marks]

    Explain why equivalence pH is above 7 when a weak acid is titrated with strong base.

    Show mark schemeHide mark scheme

    Model answer

    The weak acid forms its conjugate base at equivalence. That ion reacts with water, making the solution basic.

    • 1 mark for stating that the weak acid forms its conjugate base
    • 1 mark for explaining that the conjugate base reacts with water to make the solution basic
  3. 3.Compare[3 marks]

    Compare strong acid–strong base and weak acid–strong base titration curves before and at equivalence.

    Show mark schemeHide mark scheme

    Model answer

    The weak acid curve has a buffer region before equivalence, unlike the strong acid curve. At 25 °C, the strong acid curve reaches equivalence at pH 7. The weak acid curve reaches equivalence above pH 7.

    • 1 mark for identifying a buffer region before equivalence only for the weak acid
    • 1 mark for stating that strong acid–strong base equivalence occurs at pH 7 at 25 °C
    • 1 mark for stating that weak acid–strong base equivalence occurs above pH 7
  4. 4.Calculate[3 marks]

    Calculate the concentration of a 30.0 mL HCl\mathrm{HCl}HCl sample that reaches equivalence after 24.0 mL of 0.150 M NaOH\mathrm{NaOH}NaOH.

    Show mark schemeHide mark scheme

    Model answer

    n(NaOH)=(0.150)(0.0240)=0.00360 moln(\mathrm{NaOH})=(0.150)(0.0240)=0.00360\mathrm{\,mol}n(NaOH)=(0.150)(0.0240)=0.00360mol. The reaction is one-to-one, so n(HCl)=0.00360 moln(\mathrm{HCl})=0.00360\mathrm{\,mol}n(HCl)=0.00360mol. Thus, C=0.00360/0.0300=0.120 mol L−1C=0.00360/0.0300=0.120\mathrm{\,mol\,L^{-1}}C=0.00360/0.0300=0.120molL−1.

    • 1 mark for calculating 0.00360 mol of sodium hydroxide
    • 1 mark for using the one-to-one mole ratio to obtain 0.00360 mol of hydrochloric acid
    • 1 mark for calculating an acid concentration of 0.120 mol L−10.120\mathrm{\,mol\,L^{-1}}0.120molL−1
  5. 5.Explain[2 marks]

    Explain why an indicator endpoint may differ from the equivalence point.

    Show mark schemeHide mark scheme

    Model answer

    Equivalence is fixed by the reaction’s mole ratio. An indicator endpoint is the observed color change, which may occur at a slightly different added volume.

    • 1 mark for defining equivalence by the stoichiometric mole ratio
    • 1 mark for explaining that the indicator’s observed color change may occur at a different volume

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Identify[1 mark]

Which feature is most characteristic of the region before equivalence when a weak acid is titrated with a strong base?
Show answer and explanation

Answer: A · Worked explanation

Before equivalence, some weak acid remains and some conjugate base has formed, so both members of a conjugate pair are present. This creates a buffer region in which pH changes relatively gradually; pH is not fixed at 7, and the steep change is near equivalence.
3.

Easy·State[1 mark]

At 25 °C, what is the equivalence-point pH for a strong acid–strong base titration?
Show answer and explanation

Answer: B · Worked explanation

At 25 °C, a strong acid–strong base titration has an equivalence pH of 7 because the resulting ions do not react appreciably with water. An equivalence pH below or above 7 is instead associated with the hydrolysis of an acidic or basic ion, as in a weak-acid or weak-base titration.
4.

Easy·Identify[1 mark]

A 20.0 mL20.0\,\text{mL}20.0mL sample of base is titrated with acid. At equivalence, which condition has been met?
Show answer and explanation

Answer: D · Worked explanation

Equivalence is defined by the stoichiometric mole ratio in the balanced reaction, not by a particular pH, indicator color, or equality of volumes. Equal volumes would imply equal moles only in special cases, such as equal concentrations and a one-to-one reaction.
5.

Medium·Determine[2 marks]

A curve for a sample being titrated with base has its steepest region centered at 31.6 mL31.6\,\text{mL}31.6mL of added titrant. The sample volume was 25.0 mL25.0\,\text{mL}25.0mL. Determine the equivalence volume of base.
Show answer and explanation

Answer: B · Worked explanation

The equivalence volume is read from the titrant-volume axis at the inflection point in the steep region, which is centered at 31.6 mL31.6\,\text{mL}31.6mL. The 25.0 mL25.0\,\text{mL}25.0mL value is the original sample volume, not the volume of titrant at equivalence.
6.

Medium·Deduce[2 marks]

Two samples are titrated with strong base. Curve P begins at a higher pH, has a gradual region before the steep rise, and has an equivalence pH above 7. Curve Q has no gradual buffer region and reaches pH 7 at equivalence. Deduce the acids in the samples.
Show answer and explanation

Answer: C · Worked explanation

A weak acid begins at a higher pH than a comparable strong acid, produces a buffer region as its conjugate base forms, and has an equivalence pH above 7 when titrated with strong base. Curve Q matches a strong acid–strong base titration, which lacks that buffer region and has equivalence pH 7 at 25 °C.
7.

Medium·Calculate[2 marks]

A 32.0 mL32.0\,\text{mL}32.0mL sample of monoprotic acid reaches equivalence when 18.0 mL18.0\,\text{mL}18.0mL of 0.125 M0.125\,\text{M}0.125M sodium hydroxide has been added. Calculate the acid concentration.
Show answer and explanation

Answer: D · Worked explanation

The sodium hydroxide amount is (0.125 mol L−1)(0.0180 L)=0.00225 mol(0.125\,\text{mol L}^{-1})(0.0180\,\text{L})=0.00225\,\text{mol}(0.125mol L−1)(0.0180L)=0.00225mol. The one-to-one reaction means the acid also has 0.00225 mol0.00225\,\text{mol}0.00225mol, so its concentration is 0.00225 mol/0.0320 L=0.0703 M0.00225\,\text{mol}/0.0320\,\text{L}=0.0703\,\text{M}0.00225mol/0.0320L=0.0703M. The tempting 0.125 M0.125\,\text{M}0.125M answer repeats the titrant concentration without using the volumes.
8.

Medium·Explain[2 marks]

A weak base is titrated with a strong acid. Explain why the equivalence-point pH is below 7.
Show answer and explanation

Answer: A · Worked explanation

At equivalence, the weak base has been converted mainly into its conjugate acid. That ion reacts with water in a way that produces an acidic solution, so the equivalence pH is below 7. Strong acid is not necessarily in excess at equivalence; equivalence means the reactants have combined in the stoichiometric ratio.
9.

Medium·Calculate[2 marks]

A 40.0 mL40.0\,\text{mL}40.0mL sample of a diprotic acid, H2A\text{H}_2\text{A}H2​A, is titrated with 0.150 M0.150\,\text{M}0.150M sodium hydroxide. The second (final) equivalence point occurs after 24.0 mL24.0\,\text{mL}24.0mL of base is added. Calculate the acid concentration using H2A+2NaOH→Na2A+2H2O\text{H}_2\text{A}+2\text{NaOH}\rightarrow\text{Na}_2\text{A}+2\text{H}_2\text{O}H2​A+2NaOH→Na2​A+2H2​O.
Show answer and explanation

Answer: C · Worked explanation

The base amount is (0.150 mol L−1)(0.0240 L)=0.00360 mol(0.150\,\text{mol L}^{-1})(0.0240\,\text{L})=0.00360\,\text{mol}(0.150mol L−1)(0.0240L)=0.00360mol. The balanced equation requires two moles of base per mole of acid, so the acid amount is 0.00360/2=0.00180 mol0.00360/2=0.00180\,\text{mol}0.00360/2=0.00180mol and its concentration is 0.00180/0.0400=0.0450 M0.00180/0.0400=0.0450\,\text{M}0.00180/0.0400=0.0450M. Using a one-to-one ratio would incorrectly double the result.
10.

Hard·Determine[2 marks]

An indicator changes color over pH 8.2–10.0. A weak acid is titrated with a strong base, and the curve’s steep region runs from pH 6.1 to 11.3, with its inflection point above pH 7. Which conclusion about the indicator is best supported?
Show answer and explanation

Answer: A · Worked explanation

The indicator changes color across pH 8.2–10.0, which lies within the curve’s steep region, so its endpoint is expected to occur close to the inflection point and equivalence. The equivalence pH is above 7 for a weak acid titrated with strong base, and equivalence is not universally at pH 7.

Keep going

Next topic8.6 Molecular structure of acids and basesPrevious topic8.4 Acid-base reactions and buffers

More in Unit 8 · Acids and Bases

  1. 8.1Introduction to acids and basesNotes · 10 questions
  2. 8.2pH and pOH of strong acids and basesNotes · 10 questions
  3. 8.3Weak acid and base equilibriaNotes · 10 questions
  4. 8.4Acid-base reactions and buffersNotes · 10 questions
  5. 8.5Acid-base titrationsNotes · 10 questions
  6. 8.6Molecular structure of acids and basesNotes · 10 questions
  7. 8.7pH and pKaNotes · 10 questions
  8. 8.8Properties of buffersNotes · 10 questions
  9. 8.9Henderson-Hasselbalch equationNotes · 10 questions

All AP Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1A titration curve tracks pH as titrant is added
  2. 2Equivalence occurs at the required mole ratio
  3. 3Acid and base strength shapes the curve
  4. 4Equivalence volume reveals an unknown concentration
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe