Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Chemistry
  3. ›8 Acids and Bases
  4. ›8.2 pH and pOH of strong acids and bases

AP Chemistry · Unit 8 · Acids and Bases

8.2 pH and pOH of strong acids and bases

Calculate pH and pOH for strong acids and bases, and convert between their concentrations and pH values.

  • 2 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Strong acids and bases determine ion concentrations directly
  1. 1Strong acids and bases determine ion concentrations directly
  2. 2Logarithms turn ion concentrations into pH and pOH
  3. 3Water links hydrogen and hydroxide ion measurements
  4. 4A consistent sequence handles strong-base calculations
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Strong acids and bases determine ion concentrations directly

A strong acid ionizes essentially completely in water. For a strong acid that releases one hydrogen ion per formula unit, [H+][\mathrm{H^+}][H+] equals the acid’s initial concentration. A strong base dissociates essentially completely. Count its hydroxide ions when finding [OH−][\mathrm{OH^-}][OH−]. For example, 0.010 mol L−10.010\,\mathrm{mol\,L^{-1}}0.010molL−1 NaOH gives [OH−]=0.010 mol L−1[\mathrm{OH^-}]=0.010\,\mathrm{mol\,L^{-1}}[OH−]=0.010molL−1. The same concentration of Ba(OH)2\mathrm{Ba(OH)_2}Ba(OH)2​ gives [OH−]=0.020 mol L−1[\mathrm{OH^-}]=0.020\,\mathrm{mol\,L^{-1}}[OH−]=0.020molL−1.

Common mistake

Do not assume a strong base always gives one hydroxide ion per formula unit. Use its formula to count the ions.

These direct concentration rules assume the acid or base supplies far more ions than water does.

Key terms · tap one for its definition

strong acid

A strong acid ionizes essentially completely when dissolved in water.

strong base

A strong base dissociates essentially completely to produce hydroxide ions in water.

Part 1 done

2

Part 2 of 4: Logarithms turn ion concentrations into pH and pOH

pH measures hydrogen ion concentration on a logarithmic scale: pH=−log⁡10[H+]\mathrm{pH}=-\log_{10}[\mathrm{H^+}]pH=−log10​[H+]. pOH measures hydroxide ion concentration: pOH=−log⁡10[OH−]\mathrm{pOH}=-\log_{10}[\mathrm{OH^-}]pOH=−log10​[OH−]. Enter concentrations in mol L−1\mathrm{mol\,L^{-1}}molL−1 when using these forms. A concentration change by a factor of ten changes its corresponding pH or pOH by one unit.

Increasing [H+][\mathrm{H^+}][H+] lowers pH. Increasing [OH−][\mathrm{OH^-}][OH−] lowers pOH. Therefore, diluting a strong acid raises its pH, while diluting a strong base lowers its pH. These trends apply when the added acid or base still dominates water’s contribution.

Exam tip

Report pH and pOH without units. The number of decimal places should match the concentration’s significant figures.

Key terms · tap one for its definition

pH

pH is the negative base-ten logarithm of hydrogen ion concentration expressed in mol L⁻¹.

pOH

pOH is the negative base-ten logarithm of hydroxide ion concentration expressed in mol L⁻¹.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the hydrogen ion concentration in a 0.020 mol L−10.020\,\mathrm{mol\,L^{-1}}0.020molL−1 solution of the strong monoprotic acid HNO3_33​.
Show answer and explanation

Answer: D · Worked explanation

HNO3_33​ is a strong monoprotic acid, so it ionizes essentially completely and each formula unit supplies one H+^++. Therefore, [H+][\mathrm{H^+}][H+] equals the acid concentration, 0.020 mol L−10.020\,\mathrm{mol\,L^{-1}}0.020molL−1. The value 0.010 mol L−10.010\,\mathrm{mol\,L^{-1}}0.010molL−1 incorrectly halves the concentration, as if only partial ionization occurred.
3

Part 3 of 4: Water links hydrogen and hydroxide ion measurements

At 25 °C, water’s ion-product constant is Kw=[H+][OH−]=1.0×10−14K_\mathrm{w}=[\mathrm{H^+}][\mathrm{OH^-}]=1.0\times10^{-14}Kw​=[H+][OH−]=1.0×10−14. Thus, pH+pOH=14.00\mathrm{pH}+\mathrm{pOH}=14.00pH+pOH=14.00 at this temperature. Divide KwK_\mathrm{w}Kw​ by one ion concentration to find the other. Then use a logarithm to find its pH or pOH.

These equations also work in reverse: [H+]=10−pH[\mathrm{H^+}]=10^{-\mathrm{pH}}[H+]=10−pH and [OH−]=10−pOH[\mathrm{OH^-}]=10^{-\mathrm{pOH}}[OH−]=10−pOH, in mol L−1\mathrm{mol\,L^{-1}}molL−1. At 25 °C, a neutral solution has pH 7.00 and pOH 7.00. Acidic solutions have lower pH; basic solutions have higher pH.

Common mistake

The sum 14.00 applies at 25 °C. It changes when temperature changes.

Key term

ion-product constant

Water’s ion-product constant is the product of hydrogen and hydroxide ion concentrations at a given temperature.

Part 3 done

4

Part 4 of 4: A consistent sequence handles strong-base calculations

First, find the ion concentration supplied by complete dissociation. Next, calculate the matching pH or pOH. At 25 °C, subtract that value from 14.00 to find the other. Use KwK_\mathrm{w}Kw​ if you also need the other ion concentration.

Worked example

Find pH from a strong base

At 25 °C, find the pOH and pH of 0.0020 mol L−10.0020\,\mathrm{mol\,L^{-1}}0.0020molL−1 Ba(OH)2\mathrm{Ba(OH)_2}Ba(OH)2​.
  1. 1
    [OH−]=2(0.0020)=0.0040 mol L−1[\mathrm{OH^-}]=2(0.0020)=0.0040\,\mathrm{mol\,L^{-1}}[OH−]=2(0.0020)=0.0040molL−1.
  2. 2
    pOH=−log⁡10(0.0040)=2.40\mathrm{pOH}=-\log_{10}(0.0040)=2.40pOH=−log10​(0.0040)=2.40.
  3. 3
    pH=14.00−2.40=11.60\mathrm{pH}=14.00-2.40=11.60pH=14.00−2.40=11.60.

Answer: The solution has pOH 2.40 and pH 11.60; both values are unitless.

Check the direction of your answer. This basic solution has a pH above 7.00. Its hydroxide concentration also exceeds its hydrogen ion concentration.

Note read

Check your recall[13 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Calculate[2 marks]

    Calculate the pH of 0.0010 mol L−10.0010\,\mathrm{mol\,L^{-1}}0.0010molL−1 HCl at 25 °C.

    Show mark schemeHide mark scheme

    Model answer

    HCl ionizes completely, so [H+]=0.0010 mol L−1[\mathrm{H^+}]=0.0010\,\mathrm{mol\,L^{-1}}[H+]=0.0010molL−1. Therefore, pH=−log⁡10(0.0010)=3.00\mathrm{pH}=-\log_{10}(0.0010)=3.00pH=−log10​(0.0010)=3.00.

    • 1 mark for identifying [H+]=0.0010 mol L−1[\mathrm{H^+}]=0.0010\,\mathrm{mol\,L^{-1}}[H+]=0.0010molL−1
    • 1 mark for calculating pH as 3.00
  2. 2.Calculate[3 marks]

    Calculate [OH−][\mathrm{OH^-}][OH−], pOH, and pH for 0.015 mol L−10.015\,\mathrm{mol\,L^{-1}}0.015molL−1 Ba(OH)2\mathrm{Ba(OH)_2}Ba(OH)2​ at 25 °C.

    Show mark schemeHide mark scheme

    Model answer

    [OH−]=2(0.015)=0.030 mol L−1[\mathrm{OH^-}]=2(0.015)=0.030\,\mathrm{mol\,L^{-1}}[OH−]=2(0.015)=0.030molL−1. Then pOH=−log⁡10(0.030)=1.52\mathrm{pOH}=-\log_{10}(0.030)=1.52pOH=−log10​(0.030)=1.52, and pH=14.00−1.52=12.48\mathrm{pH}=14.00-1.52=12.48pH=14.00−1.52=12.48.

    • 1 mark for calculating [OH−]=0.030 mol L−1[\mathrm{OH^-}]=0.030\,\mathrm{mol\,L^{-1}}[OH−]=0.030molL−1
    • 1 mark for calculating pOH as 1.52
    • 1 mark for calculating pH as 12.48
  3. 3.Determine[3 marks]

    Determine pOH, [H+][\mathrm{H^+}][H+], and [OH−][\mathrm{OH^-}][OH−] for a solution with pH 4.00 at 25 °C.

    Show mark schemeHide mark scheme

    Model answer

    pOH=14.00−4.00=10.00\mathrm{pOH}=14.00-4.00=10.00pOH=14.00−4.00=10.00. Thus, [H+]=1.0×10−4 mol L−1[\mathrm{H^+}]=1.0\times10^{-4}\,\mathrm{mol\,L^{-1}}[H+]=1.0×10−4molL−1 and [OH−]=1.0×10−10 mol L−1[\mathrm{OH^-}]=1.0\times10^{-10}\,\mathrm{mol\,L^{-1}}[OH−]=1.0×10−10molL−1.

    • 1 mark for determining pOH as 10.00
    • 1 mark for determining [H+]=1.0×10−4 mol L−1[\mathrm{H^+}]=1.0\times10^{-4}\,\mathrm{mol\,L^{-1}}[H+]=1.0×10−4molL−1
    • 1 mark for determining [OH−]=1.0×10−10 mol L−1[\mathrm{OH^-}]=1.0\times10^{-10}\,\mathrm{mol\,L^{-1}}[OH−]=1.0×10−10molL−1
  4. 4.Explain[3 marks]

    Explain how diluting a strong acid tenfold changes its pH when the acid still dominates water’s contribution.

    Show mark schemeHide mark scheme

    Model answer

    The hydrogen ion concentration falls by a factor of ten because the acid ionizes completely. Since pH is logarithmic, the pH rises by one unit.

    • 1 mark for stating that hydrogen ion concentration falls by a factor of ten
    • 1 mark for linking hydrogen ion concentration to complete acid ionization
    • 1 mark for stating that pH rises by one unit because the scale is logarithmic
  5. 5.Calculate[2 marks]

    Calculate the pH and pOH of 1.0×10−3 mol L−11.0\times10^{-3}\,\mathrm{mol\,L^{-1}}1.0×10−3molL−1 NaOH at 25 °C.

    Show mark schemeHide mark scheme

    Model answer

    Complete dissociation gives [OH−]=1.0×10−3 mol L−1[\mathrm{OH^-}]=1.0\times10^{-3}\,\mathrm{mol\,L^{-1}}[OH−]=1.0×10−3molL−1. Therefore, pOH is 3.00 and pH is 11.00.

    • 1 mark for calculating pOH as 3.00 from the hydroxide concentration
    • 1 mark for calculating pH as 11.00

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·State[1 mark]

State how the pH of a strong acid solution changes when its hydrogen ion concentration decreases by a factor of 10, with the acid still dominating water’s contribution.
Show answer and explanation

Answer: C · Worked explanation

Because pH=−log⁡10[H+]\mathrm{pH}=-\log_{10}[\mathrm{H^+}]pH=−log10​[H+], reducing the hydrogen ion concentration tenfold raises the pH by one unit. A decrease of one unit would instead follow a tenfold increase in hydrogen ion concentration. The logarithmic scale means the pH does not change by a factor of ten.
3.

Easy·Identify[1 mark]

Identify the hydroxide ion concentration in a solution with pOH 3.00.
Show answer and explanation

Answer: D · Worked explanation

Rearranging pOH=−log⁡10[OH−]\mathrm{pOH}=-\log_{10}[\mathrm{OH^-}]pOH=−log10​[OH−] gives [OH−]=10−pOH[\mathrm{OH^-}]=10^{-\mathrm{pOH}}[OH−]=10−pOH. Substituting pOH 3.00 gives 10−3.00=1.0×10−3 mol L−110^{-3.00}=1.0\times10^{-3}\,\mathrm{mol\,L^{-1}}10−3.00=1.0×10−3molL−1. The value 1.0×10−11 mol L−11.0\times10^{-11}\,\mathrm{mol\,L^{-1}}1.0×10−11molL−1 confuses pOH with the corresponding pH at 25 °C.
4.

Easy·Identify[1 mark]

Which statement describes the ion concentration produced by complete dissociation of 0.030 mol L−10.030\,\mathrm{mol\,L^{-1}}0.030molL−1 NaOH?
Show answer and explanation

Answer: D · Worked explanation

Each formula unit of NaOH supplies one hydroxide ion, so complete dissociation gives [OH−]=0.030 mol L−1[\mathrm{OH^-}]=0.030\,\mathrm{mol\,L^{-1}}[OH−]=0.030molL−1. The doubled concentration would apply to a base such as Ba(OH)2_22​, which supplies two hydroxide ions per formula unit, not to NaOH.
5.

Medium·Calculate[2 marks]

Calculate the pH of a 0.0040 mol L−10.0040\,\mathrm{mol\,L^{-1}}0.0040molL−1 solution of the strong monoprotic acid HClO4_44​.
Show answer and explanation

Answer: B · Worked explanation

HClO4_44​ ionizes completely and supplies one H+^++ per formula unit, so [H+]=0.0040 mol L−1[\mathrm{H^+}]=0.0040\,\mathrm{mol\,L^{-1}}[H+]=0.0040molL−1. Then pH=−log⁡10(0.0040)=2.40\mathrm{pH}=-\log_{10}(0.0040)=2.40pH=−log10​(0.0040)=2.40. The value 11.60 is the pH one would obtain by treating 2.40 as a pOH and using the 25 °C relationship.
6.

Medium·Determine[2 marks]

A strong acid solution has [H+]=2.0×10−5 mol L−1[\mathrm{H^+}]=2.0\times10^{-5}\,\mathrm{mol\,L^{-1}}[H+]=2.0×10−5molL−1. Determine its pH and the pH after its hydrogen ion concentration is diluted tenfold, assuming the acid still dominates water’s contribution.
Show answer and explanation

Answer: B · Worked explanation

Initially, pH=−log⁡10(2.0×10−5)=4.70\mathrm{pH}=-\log_{10}(2.0\times10^{-5})=4.70pH=−log10​(2.0×10−5)=4.70. Tenfold dilution gives [H+]=2.0×10−6 mol L−1[\mathrm{H^+}]=2.0\times10^{-6}\,\mathrm{mol\,L^{-1}}[H+]=2.0×10−6molL−1 and pH 5.70, so the pH rises by one. The 3.70 result reverses the dilution trend: lower hydrogen ion concentration means higher pH.
7.

Medium·Determine[2 marks]

At 25 °C, a solution has pOH 5.25. Determine its pH and hydrogen ion concentration.
Show answer and explanation

Answer: C · Worked explanation

At 25 °C, pH=14.00−pOH=14.00−5.25=8.75\mathrm{pH}=14.00-\mathrm{pOH}=14.00-5.25=8.75pH=14.00−pOH=14.00−5.25=8.75. Then [H+]=10−8.75=1.8×10−9 mol L−1[\mathrm{H^+}]=10^{-8.75}=1.8\times10^{-9}\,\mathrm{mol\,L^{-1}}[H+]=10−8.75=1.8×10−9molL−1. The value 5.6×10−6 mol L−15.6\times10^{-6}\,\mathrm{mol\,L^{-1}}5.6×10−6molL−1 is the hydroxide concentration corresponding to pOH 5.25, not the hydrogen ion concentration.
8.

Medium·Compare[2 marks]

Two strong monoprotic acid solutions have concentrations 1.0×10−3 mol L−11.0\times10^{-3}\,\mathrm{mol\,L^{-1}}1.0×10−3molL−1 and 1.0×10−5 mol L−11.0\times10^{-5}\,\mathrm{mol\,L^{-1}}1.0×10−5molL−1. Compare their pH values, assuming both acids dominate water’s contribution.
Show answer and explanation

Answer: D · Worked explanation

For each strong monoprotic acid, the hydrogen ion concentration equals its acid concentration. The pH values are 3.00 and 5.00, respectively, so the more concentrated solution has a pH two units lower. A tenfold concentration change corresponds to one pH unit; here the concentration differs by a factor of 100.
9.

Medium·Calculate[2 marks]

At 25 °C, a solution has [OH−]=4.0×10−4 mol L−1[\mathrm{OH^-}]=4.0\times10^{-4}\,\mathrm{mol\,L^{-1}}[OH−]=4.0×10−4molL−1. Calculate its pOH and pH.
Show answer and explanation

Answer: B · Worked explanation

Calculate pOH=−log⁡10(4.0×10−4)=3.40\mathrm{pOH}=-\log_{10}(4.0\times10^{-4})=3.40pOH=−log10​(4.0×10−4)=3.40. At 25 °C, pH=14.00−3.40=10.60\mathrm{pH}=14.00-3.40=10.60pH=14.00−3.40=10.60. The pair 10.60 and 3.40 reverses pH and pOH; it is the pOH, not the pH, that is calculated directly from hydroxide concentration.
10.

Hard·Determine[2 marks]

At 25 °C, 0.0030 mol L−10.0030\,\mathrm{mol\,L^{-1}}0.0030molL−1 Ba(OH)2_22​ is diluted until its volume is three times its original volume. Determine the final pH, assuming the base still dominates water’s contribution.
Show answer and explanation

Answer: A · Worked explanation

Ba(OH)2_22​ supplies two hydroxide ions per formula unit, so the initial hydroxide concentration is 2(0.0030)=0.0060 mol L−12(0.0030)=0.0060\,\mathrm{mol\,L^{-1}}2(0.0030)=0.0060molL−1. Tripling the volume reduces it to 0.0020 mol L−10.0020\,\mathrm{mol\,L^{-1}}0.0020molL−1, giving pOH =−log⁡10(0.0020)=2.70=-\log_{10}(0.0020)=2.70=−log10​(0.0020)=2.70 and pH =14.00−2.70=11.30=14.00-2.70=11.30=14.00−2.70=11.30. The 11.00 result comes from forgetting the two hydroxide ions.

Keep going

Next topic8.3 Weak acid and base equilibriaPrevious topic8.1 Introduction to acids and bases

More in Unit 8 · Acids and Bases

  1. 8.1Introduction to acids and basesNotes · 10 questions
  2. 8.2pH and pOH of strong acids and basesNotes · 10 questions
  3. 8.3Weak acid and base equilibriaNotes · 10 questions
  4. 8.4Acid-base reactions and buffersNotes · 10 questions
  5. 8.5Acid-base titrationsNotes · 10 questions
  6. 8.6Molecular structure of acids and basesNotes · 10 questions
  7. 8.7pH and pKaNotes · 10 questions
  8. 8.8Properties of buffersNotes · 10 questions
  9. 8.9Henderson-Hasselbalch equationNotes · 10 questions

All AP Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1Strong acids and bases determine ion concentrations directly
  2. 2Logarithms turn ion concentrations into pH and pOH
  3. 3Water links hydrogen and hydroxide ion measurements
  4. 4A consistent sequence handles strong-base calculations
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe