Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Environmental Science
  3. ›6 Energy Resources and Consumption
  4. ›6.3 Fuel types and uses

AP Environmental Science · Unit 6 · Energy Resources and Consumption

6.3 Fuel types and uses

List common fuel types, describe their typical uses, and compare their advantages and disadvantages.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Fuels store energy that combustion releases as heat
  1. 1Fuels store energy that combustion releases as heat
  2. 2Fossil fuels power most vehicles, electricity, and heating
  3. 3Biomass and nuclear fuel meet different needs
  4. 4Each fuel has advantages and disadvantages that affect its use
  5. 5Matching a fuel to its use means weighing several factors
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Fuels store energy that combustion releases as heat

A campfire turns wood into heat and light. Wood is acting as a fuel, a material that stores energy and releases it when used. Most fuels release this energy through combustion.

During combustion, the fuel reacts with oxygen to form products such as carbon dioxide and water. Burning also gives off pollutants if the fuel contains impurities. The stored energy is chemical energy, released as new bonds form in the products. Nuclear fuels differ, and a later section covers them.

Methane, the main part of natural gas, burns as shown below.

CH4(g)+2O2(g)→CO2(g)+2H2O(g)\mathrm{CH_4(g)+2O_2(g)\rightarrow CO_2(g)+2H_2O(g)}CH4​(g)+2O2​(g)→CO2​(g)+2H2​O(g)

Key terms · tap one for its definition

fuel

A fuel is a material that stores chemical or nuclear energy and releases it as heat or work when used.

combustion

Combustion is a chemical reaction in which a substance reacts rapidly with oxygen, releasing heat and light.

products

Products are the substances formed by a chemical reaction.

Part 1 done

2

Part 2 of 5: Fossil fuels power most vehicles, electricity, and heating

Fossil fuels formed over millions of years from buried remains of ancient organisms. These fuels are nonrenewable, since new supplies form far too slowly. Three types dominate everyday life. Coal is a solid, mostly burned in power plants and factories.

Petroleum is a liquid that refineries separate into gasoline, diesel, and jet fuel. Natural gas is a gas used for heating, cooking, and electricity.

Each fuel suits a different job. Liquid fuels are easy to carry in a tank, so vehicles use them. Gas moves through pipelines to homes and plants, and coal arrives by train or ship.

Key terms · tap one for its definition

coal

Coal is a solid fossil fuel formed from compressed plant matter and made up mostly of carbon.

petroleum

Petroleum is a liquid mixture of hydrocarbons, also called crude oil, that is refined into fuels such as gasoline and diesel.

natural gas

Natural gas is a gaseous fossil fuel made up mostly of methane.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the fuel most commonly refined into gasoline and diesel.
Show answer and explanation

Answer: A · Worked explanation

Petroleum, or crude oil, is separated at refineries into gasoline, diesel, and jet fuel. Coal is mostly burned in power plants and factories, uranium is used in nuclear power, and natural gas is used for heating, cooking, and electricity.
3

Part 3 of 5: Biomass and nuclear fuel meet different needs

Not every fuel is burned in the same way. Wood, charcoal, and crop residues supply cooking and heating for many households. A biofuel is a liquid or gas made from recently living material, such as ethanol made from corn or sugarcane. Wood and biofuels are renewable only when the plants are regrown.

Nuclear power works differently. Nuclear fuel, usually uranium, is not burned. Its atoms split in a process called fission, and the heat released boils water to make steam for electricity.

Common mistake

Nuclear power is not combustion. Uranium atoms split, and no reaction with oxygen takes place.

Typical uses of common fuels

FuelTypical uses
CoalElectricity generation, industry
PetroleumCars, trucks, ships, aircraft
Natural gasHome heating, cooking, electricity
Wood and biofuelsCooking, heating, vehicle fuel
UraniumElectricity generation
Fuel
Coal
Typical uses
Electricity generation, industry
Fuel
Petroleum
Typical uses
Cars, trucks, ships, aircraft
Fuel
Natural gas
Typical uses
Home heating, cooking, electricity
Fuel
Wood and biofuels
Typical uses
Cooking, heating, vehicle fuel
Fuel
Uranium
Typical uses
Electricity generation

Key terms · tap one for its definition

biofuel

A biofuel is a liquid or gaseous fuel made from recently living organic material.

nuclear fuel

Nuclear fuel is a material, usually enriched uranium, whose atoms split by fission and release heat used to generate electricity.

Part 3 done

4

Part 4 of 5: Each fuel has advantages and disadvantages that affect its use

Which fuel is best? The answer depends on the job. Two properties matter most. Energy density is the energy stored per unit of mass or volume. A high value means a vehicle can travel farther on a small tank.

The second property is emissions. Burning carbon-based fuels releases carbon dioxide, a greenhouse gas that traps heat in the atmosphere. The amount released per unit of energy differs between fuels.

Advantages and disadvantages of major fuels

FuelAdvantageDisadvantage
CoalAbundant and inexpensiveHigh carbon dioxide and air pollution
PetroleumHigh energy density, easy to moveCarbon dioxide; spills harm ecosystems
Natural gasBurns cleaner than coalLeaks release methane, a greenhouse gas
BiomassRenewable if regrownNeeds land; burning makes smoke
Nuclear fuelNo carbon dioxide during operationRadioactive waste needs long storage
Fuel
Coal
Advantage
Abundant and inexpensive
Disadvantage
High carbon dioxide and air pollution
Fuel
Petroleum
Advantage
High energy density, easy to move
Disadvantage
Carbon dioxide; spills harm ecosystems
Fuel
Natural gas
Advantage
Burns cleaner than coal
Disadvantage
Leaks release methane, a greenhouse gas
Fuel
Biomass
Advantage
Renewable if regrown
Disadvantage
Needs land; burning makes smoke
Fuel
Nuclear fuel
Advantage
No carbon dioxide during operation
Disadvantage
Radioactive waste needs long storage

Exam tip

When comparing two fuels, name the same feature for both, such as emissions or energy density.

Key terms · tap one for its definition

energy density

Energy density is the amount of energy a fuel stores per unit of mass or volume, such as megajoules per kilogram.

greenhouse gas

A greenhouse gas is a gas, such as carbon dioxide or methane, that absorbs heat radiated from Earth and warms the lower atmosphere.

Part 4 done

Quick check

One question on the part you just read

Easy

Identify the products of the complete combustion of methane.
Show answer and explanation

Answer: B · Worked explanation

Complete combustion of methane with oxygen forms carbon dioxide and water, as the balanced equation shows. Methane and oxygen are the starting materials, not the products. Carbon monoxide and hydrogen are not the main products, and uranium is not involved.
5

Part 5 of 5: Matching a fuel to its use means weighing several factors

A planner starts with the task. Vehicles need portable, energy-dense fuel, so liquid fuels dominate transportation. Power plants need large, steady supplies, which suits coal, natural gas, and uranium.

Cost and supply matter next. A fuel that is cheap but must be imported brings price risk. Infrastructure also counts, since pipelines, refineries, and plants take years to build.

Environmental effects complete the picture. Emissions, mining damage, spills, and waste all carry costs. As a result, many regions combine several fuels instead of relying on one.

Common mistake

A fuel that works well for one use is not automatically the best choice for another. Match the fuel to the task.

Note read

Check your recall[12 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Identify[2 marks]

    Identify two common fuel types and one typical use of each.

    Show mark schemeHide mark scheme

    Model answer

    Petroleum is used for vehicles. Natural gas is used for home heating.

    • 1 mark for identifying one fuel and a correct typical use
    • 1 mark for identifying a second fuel and a correct typical use
  2. 2.Describe[2 marks]

    Describe what happens when methane undergoes combustion.

    Show mark schemeHide mark scheme

    Model answer

    Methane reacts with oxygen. The products are carbon dioxide and water, and energy is released as heat.

    • 1 mark for stating that methane reacts with oxygen
    • 1 mark for stating that carbon dioxide and water form and heat is released
  3. 3.Explain[2 marks]

    Explain why petroleum is widely used as a transportation fuel.

    Show mark schemeHide mark scheme

    Model answer

    Petroleum fuels have high energy density, so a small tank gives a long range. They are liquids, so they are easy to store and carry.

    • 1 mark for stating that petroleum fuels have high energy density
    • 1 mark for stating that they are liquids that are easy to store or carry
  4. 4.Describe[2 marks]

    Describe one advantage and one disadvantage of natural gas compared with coal.

    Show mark schemeHide mark scheme

    Model answer

    Natural gas burns cleaner than coal, releasing less carbon dioxide per unit of energy. Leaks of natural gas release methane, a greenhouse gas.

    • 1 mark for describing a correct advantage, such as lower emissions per unit of energy
    • 1 mark for describing a correct disadvantage, such as methane leaks
  5. 5.Justify[3 marks]

    Justify the claim that nuclear fuel is a lower-carbon choice for electricity than coal, and identify one drawback.

    Show mark schemeHide mark scheme

    Model answer

    Nuclear fuel releases no carbon dioxide during operation because atoms split instead of burning. Coal combustion releases carbon dioxide. A drawback is radioactive waste that needs long-term storage.

    • 1 mark for stating that nuclear power releases no carbon dioxide during operation
    • 1 mark for contrasting this with carbon dioxide released by burning coal
    • 1 mark for identifying a drawback, such as radioactive waste
  6. 6.Identify[1 mark]

    Identify the term for the energy stored per unit of mass or volume of a fuel.

    Show mark schemeHide mark scheme

    Model answer

    Energy density.

    • 1 mark for identifying energy density

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy[1 mark]

How does nuclear fuel release the energy used to make electricity?
Show answer and explanation

Answer: C · Worked explanation

Uranium atoms split during fission, releasing heat that boils water to make steam. Burning with oxygen is combustion, which does not occur in a nuclear plant. Fermentation and compression are not how nuclear fuel works. Nuclear power plants still make steam to turn turbines, but the heat source is fission.
4.

Medium·Explain[1 mark]

Explain why petroleum is a good fuel for cars and trucks.
Show answer and explanation

Answer: D · Worked explanation

Liquid petroleum fuels pack a lot of energy per volume and are easy to carry onboard. Burning them releases carbon dioxide, and they are nonrenewable. Vehicles burn them in individual engines, not in large central plants. Energy density and ease of storage matter most for a vehicle that must carry its own fuel.
5.

Medium·Compare[1 mark]

Compare natural gas with coal for generating electricity.
Show answer and explanation

Answer: A · Worked explanation

Natural gas generally burns cleaner than coal, giving less carbon dioxide for the same energy. It still releases carbon dioxide when burned, and leaks release methane. Coal, not natural gas, is the solid fuel often moved by train.
6.

Medium·Identify[1 mark]

Identify which item is an example of a biofuel.
Show answer and explanation

Answer: B · Worked explanation

A biofuel is made from recently living organic material, and ethanol from corn fits. Gasoline comes from petroleum, coal is a fossil fuel formed over millions of years, and uranium is a mined nuclear fuel. The word recently is the key clue in the definition of a biofuel.
7.

Medium·Calculate[2 marks]

Methane burns according to CH4(g)+2O2(g)→CO2(g)+2H2O(g)\mathrm{CH_4(g)+2O_2(g)\rightarrow CO_2(g)+2H_2O(g)}CH4​(g)+2O2​(g)→CO2​(g)+2H2​O(g). Calculate the moles of water formed from 5.0 mol of methane.
Show answer and explanation

Answer: D · Worked explanation

The equation shows 2 mol of water per 1 mol of methane, so 5.0 mol×2=10 mol5.0\,\mathrm{mol}\times2=10\,\mathrm{mol}5.0mol×2=10mol. The 5.0 mol value assumes a one-to-one ratio. The 2.5 mol value divides by 2 instead of multiplying, and 15 mol counts all three moles of product (carbon dioxide plus water) instead of water alone.
8.

Hard·Identify[2 marks]

Identify the correct statement about nuclear power.
Show answer and explanation

Answer: A · Worked explanation

Splitting uranium atoms releases heat without burning, so operation emits no carbon dioxide, yet the waste is radioactive and needs long-term storage. Uranium is a finite mined metal, so the source is nonrenewable even if the deposits are large.
9.

Hard·Explain[2 marks]

Burning natural gas releases less carbon dioxide than coal. Explain why leaks can weaken its climate advantage.
Show answer and explanation

Answer: B · Worked explanation

Natural gas is mostly methane, a greenhouse gas that traps heat if it escapes unburned. Leaks therefore add warming even though combustion is cleaner. Leaks do not change energy density, and methane is a reactant, not a product, of complete combustion.
10.

Hard·Justify[2 marks]

A planner needs large, steady electricity for a dense city and wants low emissions during operation, accepting waste storage costs. Justify the best fuel.
Show answer and explanation

Answer: C · Worked explanation

Nuclear fuel suits large, steady supply and has no carbon dioxide emissions in operation, at the cost of waste storage. Coal and petroleum release carbon dioxide and are nonrenewable. Burning wood also releases carbon dioxide, even though regrowth can offset it over time.

Keep going

Next topic6.4 Distribution of energy resourcesPrevious topic6.2 Global energy consumption

More in Unit 6 · Energy Resources and Consumption

  1. 6.1Renewable and nonrenewable resourcesNotes · 10 questions
  2. 6.2Global energy consumptionNotes · 10 questions
  3. 6.3Fuel types and usesNotes · 10 questions
  4. 6.4Distribution of energy resourcesNotes · 10 questions
  5. 6.5Fossil fuelsNotes · 10 questions
  6. 6.6Nuclear powerNotes · 10 questions
  7. 6.7Energy from biomassNotes · 10 questions
  8. 6.8Solar energyNotes · 10 questions
  9. 6.9Hydroelectric powerNotes · 10 questions

All AP Environmental Science topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/5 read

  1. 1Fuels store energy that combustion releases as heat
  2. 2Fossil fuels power most vehicles, electricity, and heating
  3. 3Biomass and nuclear fuel meet different needs
  4. 4Each fuel has advantages and disadvantages that affect its use
  5. 5Matching a fuel to its use means weighing several factors
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe