AP Environmental Science · Unit 6 · Energy Resources and Consumption
6.8 Solar energy
Explain how solar panels make electricity, compare passive and active solar systems, and weigh the benefits and limits of solar energy.
1/6Sunlight is a free and renewable source of energy
- Sunlight is a free and renewable source of energy
- Photovoltaic cells turn sunlight directly into electricity
- Passive solar systems capture heat through building design alone
- Active solar systems add equipment that collects and moves energy
- Solar power is clean, and its fuel is free
- Output varies, and manufacturing and land use add costs
- Check your recall
- Practice: 10 questions
Part 1 of 6: Sunlight is a free and renewable source of energy
A parked car heats up in the sun, and a sunny window warms a room. That warmth is solar energy, the radiant energy that the Sun sends to Earth. The Sun will keep supplying it for billions of years.
Sunlight arrives as tiny packets of light energy. Each packet is a photon. Photons of different colors carry different amounts of energy, and solar panels depend on this idea.
People use this energy in two main ways. Some systems capture its heat, and others convert its light into electricity.
Key terms · tap one for its definition
solar energy
Solar energy is radiant energy from the Sun, including visible light and infrared, that can be captured as heat or converted to electricity.
photon
A photon is a single packet of light energy; photons of blue light carry more energy than photons of red light.
Part 2 of 6: Photovoltaic cells turn sunlight directly into electricity
Now that sunlight is understood as a stream of photons, consider what a solar panel does with it. A photovoltaic cell is a thin slice of semiconductor, usually silicon. A panel links many such cells together.
When a photon strikes the cell, it can knock an electron loose. The cell has two silicon layers treated differently. Where they meet, an electric field forms and pushes the freed electrons one way.
Connecting a wire lets those electrons flow as a direct current, which moves in one direction only. Homes and power lines use alternating current. An inverter changes one into the other.
Key terms · tap one for its definition
photovoltaic cell
A photovoltaic cell is a semiconductor device that converts light energy directly into electrical energy by freeing electrons.
inverter
An inverter is a device that converts the direct current from solar panels into the alternating current used by homes and the grid.

Quick check
One question on the part you just read
Easy
Show answer and explanation
Answer: A · Worked explanation
Part 3 of 6: Passive solar systems capture heat through building design alone
Panels are not the only way to use the Sun. A building can collect heat with no machinery at all. This approach is a passive solar system.
- Large windows face the Sun, which means the south side in the northern hemisphere.
- Dense floors and walls with high thermal mass, such as stone or concrete, store heat.
- Roof overhangs shade the windows from the high summer Sun.
- Insulation keeps the stored heat inside.
Dense materials soak up heat during the day. They release it slowly at night, which keeps rooms warmer. No pumps or fans are needed.
Key terms · tap one for its definition
passive solar system
A passive solar system is a design that collects, stores and spreads solar heat without pumps, fans or other powered equipment.
thermal mass
Thermal mass is the ability of a material to absorb and store heat and then release it slowly as surroundings cool.
Part 4 of 6: Active solar systems add equipment that collects and moves energy
Passive design has limits. It cannot push heat to a distant room or make electricity for lights. An active solar system uses powered equipment, such as pumps, fans or electronics, to collect, move or convert solar energy.
A rooftop solar water heater is one example. A collector absorbs heat, and a pump moves the heated fluid to a storage tank. Photovoltaic panels with inverters are also active systems.
Some power plants use mirrors to focus sunlight onto a fluid. The hot fluid makes steam, and the steam spins a turbine. This design is concentrated solar power.
Passive and active solar systems compared
- Feature
- Main parts
- Passive system
- Windows, thermal mass, overhangs
- Active system
- Collectors, pumps, panels, inverters
- Feature
- Powered equipment
- Passive system
- None
- Active system
- Yes
- Feature
- Typical output
- Passive system
- Heat for a building
- Active system
- Heat or electricity
- Feature
- Cost
- Passive system
- Usually low if planned in the design
- Active system
- Higher, because of equipment
Key terms · tap one for its definition
active solar system
An active solar system is a setup that uses powered equipment, such as pumps or electronics, to collect, move or convert solar energy.
turbine
A turbine is a rotating machine whose blades are turned by a moving fluid, such as water, steam or wind.
concentrated solar power
Concentrated solar power is a method that uses mirrors to focus sunlight, heat a fluid, and generate electricity with a turbine.

Quick check
One question on the part you just read
Easy
Show answer and explanation
Answer: C · Worked explanation
Part 5 of 6: Solar power is clean, and its fuel is free
Now consider why many communities choose solar power. Several benefits stand out.
- Operating panels release no air pollutants or carbon dioxide.
- Sunlight is free and does not run out.
- Rooftop panels make power where it is used, which cuts transmission losses.
- Panels have few moving parts, so upkeep is low.
The cost of panels has fallen over time, which makes solar affordable for more users. Solar also diversifies the energy supply. That reduces dependence on imported fuels. It works at many scales, from a pocket calculator to a large solar farm.
Part 6 of 6: Output varies, and manufacturing and land use add costs
Solar power has drawbacks too. Panels make electricity only while light reaches them. Output stops at night and falls under clouds. A source that varies this way is intermittent. Batteries or other storage can fill the gaps, but they add cost.
- Large solar farms need much land and can disturb habitat.
- Making panels requires mined materials and a lot of energy.
- Installation costs a lot upfront, even though savings come later.
Key term
intermittent
An intermittent energy source is one whose output varies with weather or time of day and cannot be switched on at will.
Check your recall[13 marks]
5 written questions. Answer each one in your head or on paper, then open the mark scheme.
- 1.Describe[3 marks]
Describe how a photovoltaic cell produces an electric current.
Show mark schemeHide mark scheme
Model answer
Photons strike the cell and knock electrons loose. An electric field where the silicon layers meet pushes the electrons one way. They flow through an external wire as a direct current.
- 1 mark for stating that photons strike the cell and free electrons
- 1 mark for stating that an electric field at the junction pushes electrons in one direction
- 1 mark for stating that the electrons flow through an external wire as a direct current
- 2.Identify[2 marks]
Identify two features of a passive solar building.
Show mark schemeHide mark scheme
Model answer
Any two of: large windows facing the Sun, floors or walls with high thermal mass, roof overhangs that shade summer sun, insulation.
- 1 mark for identifying one correct feature, such as Sun-facing windows or thermal mass
- 1 mark for identifying a second correct feature, such as overhangs or insulation
- 3.Explain[2 marks]
Explain why a rooftop solar installation needs an inverter.
Show mark schemeHide mark scheme
Model answer
Panels produce direct current. Homes and the grid use alternating current, so an inverter converts one into the other.
- 1 mark for stating that panels produce direct current
- 1 mark for explaining that homes and the grid use alternating current, so conversion is needed
- 4.Describe[3 marks]
Describe the main difference between active and passive solar systems, giving one example of each.
Show mark schemeHide mark scheme
Model answer
An active system uses powered equipment such as pumps or electronics, while a passive system relies on building design alone. A solar water heater is active. A Sun-facing window with thermal mass is passive.
- 1 mark for stating that active systems use powered equipment
- 1 mark for stating that passive systems use design alone, with no powered equipment
- 1 mark for giving a correct example of each type
- 5.Justify[3 marks]
Justify why a cloudy region that relies on solar energy may also need storage or a backup source.
Show mark schemeHide mark scheme
Model answer
Solar energy is intermittent. Panel output falls under clouds and stops at night. Storage or a backup source can supply power when output is low.
- 1 mark for identifying solar energy as intermittent
- 1 mark for stating that output falls under clouds and stops at night
- 1 mark for linking storage or backup supply to meeting demand when output is low

Practice this topic
10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)
0 right0 of 10 answered
Includes the 2 quick checks in the note above.
EasyIdentify[1 mark]
Show answer and explanation
Answer: B · Worked explanation
MediumClassify[1 mark]
Show answer and explanation
Answer: A · Worked explanation
MediumPredict[1 mark]
Show answer and explanation
Answer: C · Worked explanation
MediumCalculate[1 mark]
Show answer and explanation
Answer: D · Worked explanation
MediumExplain[1 mark]
Show answer and explanation
Answer: B · Worked explanation
Hard[2 marks]
Show answer and explanation
Answer: D · Worked explanation
HardIdentify[2 marks]
Show answer and explanation
Answer: C · Worked explanation
HardCompare[2 marks]
Show answer and explanation
Answer: B · Worked explanation