AP Environmental Science · Unit 6 · Energy Resources and Consumption
6.5 Fossil fuels
Describe how coal, oil, and natural gas form, how they are extracted and used, and what they cost the environment and the economy.
1/6Fossil fuels form from buried ancient organisms
- Fossil fuels form from buried ancient organisms
- Coal, oil, and natural gas form in different settings
- Extraction methods depend on how deep the fuel lies
- Most fossil fuels are burned for heat, power, and transport
- Mining, drilling, and burning damage air, land, and water
- Economics and politics shape how much fossil fuel is used
- Check your recall
- Practice: 10 questions
Part 1 of 6: Fossil fuels form from buried ancient organisms
Gasoline and coal both come from living things that died long ago. Coal, oil, and natural gas are each a fossil fuel. Each formed when remains of organisms were buried and changed by heat and pressure over millions of years.
Their energy began as sunlight. Plants and algae captured it by photosynthesis and stored it in chemical bonds. Burning the fuel releases that stored energy as heat. Because formation takes so long, the supply cannot be replaced on a human time scale.
Key term
fossil fuel
A fossil fuel is a nonrenewable, carbon-rich energy source formed from the buried remains of ancient organisms, including coal, oil, and natural gas.
Part 2 of 6: Coal, oil, and natural gas form in different settings
Now consider how each fuel forms. Coal began in swampy ground, where dead plants piled up faster than they decayed. Burial turned them into peat, a soft, partly decayed plant material. More heat and pressure then turned peat into coal.
Oil and natural gas began in the sea. Tiny marine organisms sank to the seafloor and were buried in mud with little oxygen. Heat and pressure changed them into liquid oil and gas. Natural gas is mostly methane, a gas that burns readily.
Key terms · tap one for its definition
peat
Peat is partly decayed plant material that accumulates in waterlogged ground and is the first stage in the formation of coal.
methane
Methane is a gas made of one carbon atom bonded to four hydrogen atoms, , and is the main component of natural gas.

Quick check
One question on the part you just read
Easy
Show answer and explanation
Answer: B · Worked explanation
Part 3 of 6: Extraction methods depend on how deep the fuel lies
A deposit has to be reached before it can be used. Coal near the surface is removed by surface mining, which strips away the soil and rock above it. Deeper coal requires underground mines with shafts and tunnels.
Oil and gas are reached by drilling wells, on land or beneath the sea. Pressure in the rock often pushes the fuel upward. In shale rock, the fuel is trapped in tiny pores. Engineers free it by hydraulic fracturing, also called fracking, which pumps fluid into the rock to crack it.
Key terms · tap one for its definition
surface mining
Surface mining is the removal of soil and rock to reach shallow deposits; types include strip mining and mountaintop removal.
hydraulic fracturing
Hydraulic fracturing is injecting high-pressure fluid, mostly water with sand and chemicals, into rock to open cracks that release trapped oil or gas.
Part 4 of 6: Most fossil fuels are burned for heat, power, and transport
After extraction, fuels are processed and delivered. A refinery separates crude oil into gasoline, diesel, jet fuel, and other products. Natural gas is cleaned and sent through pipelines. Coal is cleaned, then moved by rail or ship.
- Coal: electricity generation and industrial heat, such as steelmaking.
- Oil: gasoline, diesel, and jet fuel for transportation.
- Natural gas: home heating, cooking, and electricity generation.
Most uses rely on combustion, a rapid reaction of fuel with oxygen that releases heat. In a power plant, the heat boils water. The steam drives equipment that generates electricity.
Key term
combustion
Combustion is the rapid reaction of a fuel with oxygen that releases heat and light, forming products such as carbon dioxide and water.

Quick check
One question on the part you just read
Easy
Show answer and explanation
Answer: D · Worked explanation
Part 5 of 6: Mining, drilling, and burning damage air, land, and water
Using these fuels carries real costs. The largest problems come from burning. Combustion releases carbon dioxide, a greenhouse gas that traps heat in the atmosphere. It also releases sulfur dioxide and nitrogen oxides, which form acid deposition that harms forests and lakes.
- Mining destroys habitat and can leave waste rock and polluted runoff.
- Spills and leaks from oil and gas operations contaminate water and soil.
- Burning coal releases tiny particles that harm human lungs.
- Leaks from gas wells and pipelines release methane.
Key terms · tap one for its definition
greenhouse gas
A greenhouse gas is an atmospheric gas, such as carbon dioxide or methane, that absorbs infrared radiation and warms the lower atmosphere.
acid deposition
Acid deposition is the fall of acidic compounds from the atmosphere onto land and water as rain, snow, fog, or dry particles.
Part 6 of 6: Economics and politics shape how much fossil fuel is used
Fossil fuels remain popular for practical reasons. They have high energy density, meaning a small mass stores a lot of energy. They are easy to store and transport, and existing plants and engines already run on them.
Prices rise and fall with supply, demand, and politics. A few regions hold much of the world’s oil, so producing countries can influence supply and price. Wars and sanctions can also disrupt trade.
Market prices often leave out an externality, a cost borne by people who did not choose the activity. Air pollution and climate damage are examples. Governments may respond with taxes, regulations, or subsidies for cleaner energy.
Key terms · tap one for its definition
energy density
Energy density is the amount of energy stored per unit of mass or volume of a fuel, such as megajoules per kilogram.
externality
An externality is a cost or benefit of an economic activity that falls on people who are not part of the transaction.
Check your recall[12 marks]
5 written questions. Answer each one in your head or on paper, then open the mark scheme.
- 1.Describe[3 marks]
Describe how coal forms from ancient swamp plants.
Show mark schemeHide mark scheme
Model answer
Dead plants piled up in swampy ground and were buried. They changed into peat. Over millions of years, heat and pressure turned the peat into coal.
- 1 mark for stating that dead plants accumulated and were buried in swampy ground
- 1 mark for stating that the plant material became peat
- 1 mark for stating that heat and pressure over millions of years changed peat into coal
- 2.Identify[1 mark]
Identify the main component of natural gas.
Show mark schemeHide mark scheme
Model answer
Methane.
- 1 mark for identifying methane
- 3.Explain[3 marks]
Explain how burning a fossil fuel in a power plant produces electricity.
Show mark schemeHide mark scheme
Model answer
Combustion releases heat from the fuel. The heat boils water to make steam. The steam drives equipment that generates electricity.
- 1 mark for stating that combustion releases heat
- 1 mark for stating that the heat boils water to make steam
- 1 mark for stating that the steam drives equipment that generates electricity
- 4.Describe[2 marks]
Describe two environmental impacts of using fossil fuels.
Show mark schemeHide mark scheme
Model answer
Burning releases carbon dioxide, a greenhouse gas that contributes to climate change. Surface mining destroys habitat.
- 1 mark for describing one valid impact together with its cause
- 1 mark for describing a second valid impact together with its cause
- 5.Justify[3 marks]
Justify the claim that the market price of gasoline may not reflect its full cost to society.
Show mark schemeHide mark scheme
Model answer
Burning gasoline causes air pollution and climate damage. These costs fall on people who did not choose the activity, so they are externalities. The price paid at the pump usually leaves them out.
- 1 mark for stating that burning gasoline causes pollution or climate damage
- 1 mark for identifying these costs as externalities borne by other people
- 1 mark for stating that the pump price usually leaves these costs out

Practice this topic
10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)
0 right0 of 10 answered
Includes the 2 quick checks in the note above.
Easy[1 mark]
Show answer and explanation
Answer: A · Worked explanation
Medium[1 mark]
Show answer and explanation
Answer: B · Worked explanation
Medium[1 mark]
Show answer and explanation
Answer: C · Worked explanation
Medium[1 mark]
Show answer and explanation
Answer: D · Worked explanation
Medium[1 mark]
Show answer and explanation
Answer: A · Worked explanation
Hard[2 marks]
Show answer and explanation
Answer: C · Worked explanation
Hard[2 marks]
Show answer and explanation
Answer: A · Worked explanation
Hard[2 marks]
Show answer and explanation
Answer: D · Worked explanation