Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Environmental Science
  3. ›6 Energy Resources and Consumption
  4. ›6.6 Nuclear power

AP Environmental Science · Unit 6 · Energy Resources and Consumption

6.6 Nuclear power

Explain how fission in a reactor produces electricity, and weigh the benefits, risks, and waste problems of nuclear power.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Nuclear power gets its heat from splitting atoms
  1. 1Nuclear power gets its heat from splitting atoms
  2. 2A reactor core keeps the chain reaction under control
  3. 3Fission heat is turned into electricity using steam
  4. 4Nuclear power avoids air pollution but carries serious risks
  5. 5Spent fuel stays dangerous and needs long-term storage
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Nuclear power gets its heat from splitting atoms

A nuclear power plant makes electricity much like a coal plant does, but it burns nothing. Its heat comes from splitting atoms. In nuclear fission, a neutron strikes the nucleus of a heavy atom, such as uranium-235. The nucleus splits into smaller nuclei and releases a large amount of energy.

Each split also releases extra neutrons. They can strike other nuclei and cause more splitting. This repeating process is a chain reaction.

Common mistake

Fission is not combustion. No oxygen is involved, so the reaction itself releases no carbon dioxide.

Key terms · tap one for its definition

nuclear fission

Nuclear fission is the splitting of a heavy atomic nucleus, such as uranium-235, into smaller nuclei, releasing energy and additional neutrons.

chain reaction

A chain reaction is a self-sustaining series of fissions in which neutrons released by one split cause further nuclei to split.

Part 1 done

2

Part 2 of 5: A reactor core keeps the chain reaction under control

Now consider where fission takes place. A reactor core holds fuel rods packed with uranium pellets. Natural uranium contains little uranium-235, so the fuel is processed to raise that share. This process is enrichment.

The chain reaction must stay steady. A control rod absorbs neutrons, so lowering it into the core slows fission. Raising it allows more fission. A coolant, usually water, flows through the core and carries heat away. Without these controls, the reaction could speed up and overheat the core.

Key terms · tap one for its definition

enrichment

Enrichment is the process of raising the proportion of uranium-235 in uranium fuel above its natural level so that fission can be sustained.

control rod

A control rod is a rod of neutron-absorbing material that is inserted into or withdrawn from a reactor core to regulate the fission rate.

coolant

A coolant is a fluid, often water, that circulates through a reactor core to remove the heat produced by fission.

Part 2 done

Quick check

One question on the part you just read

Easy

Which particle strikes a uranium-235 nucleus to start fission?
Show answer and explanation

Answer: C · Worked explanation

A neutron strikes the nucleus, which splits into smaller nuclei and releases energy and more neutrons. Those neutrons sustain the chain reaction. An oxygen molecule matters in combustion, but fission involves no combustion, so oxygen is not what starts the reaction.
3

Part 3 of 5: Fission heat is turned into electricity using steam

The reactor only supplies heat. The rest of the plant works like other steam power plants. Follow the energy through these steps.

  • Fission heats the coolant that flows around the fuel rods.
  • The heat boils water to make high-pressure steam.
  • The steam spins a turbine.
  • The turbine drives a generator, which produces electricity.
  • A condenser cools the used steam back into water for reuse.
Figure 1. Heat from the reactor core makes steam, which drives the turbine and generator. A condenser returns the used steam to water.

Heat left over must be released. Plants send it to a cooling tower, or to a nearby river, lake, or the sea. Warmer discharge water can stress aquatic life.

Key terms · tap one for its definition

turbine

A turbine is a machine with blades that rotates when a moving fluid, such as steam, pushes against them.

generator

A generator is a device that converts the rotational energy of a turbine into electrical energy.

Part 3 done

4

Part 4 of 5: Nuclear power avoids air pollution but carries serious risks

Countries build nuclear plants despite the costs and risks. A small amount of fuel produces a large amount of electricity. Plants run day and night, and fission releases no carbon dioxide or sulfur dioxide.

Benefits and risks of nuclear power

BenefitsRisks
No carbon dioxide from the reactionAccidents can release radioactive material
No sulfur dioxide or soot from the fuelMining and processing uranium disturb land
Reliable output around the clockConstruction is costly and slow
Small quantity of fuel neededWaste stays hazardous for a very long time
Benefits
No carbon dioxide from the reaction
Risks
Accidents can release radioactive material
Benefits
No sulfur dioxide or soot from the fuel
Risks
Mining and processing uranium disturb land
Benefits
Reliable output around the clock
Risks
Construction is costly and slow
Benefits
Small quantity of fuel needed
Risks
Waste stays hazardous for a very long time

The most serious accident risk is a meltdown, in which the core overheats until fuel melts. This can release radioactive material, which gives off harmful radiation as it decays.

Common mistake

Nuclear power is not impact free. Mining uranium, building plants, and storing waste all carry environmental costs.

Key terms · tap one for its definition

meltdown

A meltdown is a severe reactor accident in which cooling fails and overheated fuel melts, possibly releasing radioactive material.

radioactive material

Radioactive material is matter containing unstable nuclei that emit ionizing radiation as they decay.

Part 4 done

Quick check

One question on the part you just read

Easy

Which component absorbs neutrons to slow the chain reaction in a reactor core?
Show answer and explanation

Answer: A · Worked explanation

Control rods are made of material that absorbs neutrons, so lowering them into the core slows fission. The coolant is easy to confuse with them, but it carries heat away from the core rather than absorbing neutrons. The turbine and condenser are in the steam system, not the core.
5

Part 5 of 5: Spent fuel stays dangerous and needs long-term storage

What remains after the fuel is used creates the hardest problem. Used fuel, called spent fuel, is still hot and highly radioactive. It must be handled carefully for a very long time.

Some radioactive materials remain hazardous for thousands of years. Their hazard lasts as long as their nuclei keep decaying. A half-life describes how quickly that happens. Materials with long half-lives need isolation for very long periods.

Exam tip

When discussing waste, mention both the long half-lives and the lack of a permanent solution.

Storage happens in stages. First, spent fuel cools for years in deep water pools that also block radiation. Later it may move to dry casks of steel and concrete. Permanent disposal would use a deep underground repository, but finding a stable, accepted site is difficult.

Key terms · tap one for its definition

spent fuel

Spent fuel is nuclear fuel that has been used in a reactor and can no longer efficiently sustain a chain reaction but remains highly radioactive.

half-life

The half-life is the time required for half the radioactive nuclei in a sample to decay.

Note read

Check your recall[12 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Describe[3 marks]

    Describe how nuclear fission can become a chain reaction.

    Show mark schemeHide mark scheme

    Model answer

    A neutron strikes a heavy nucleus such as uranium-235, which splits and releases energy. The split also releases extra neutrons. These strike other nuclei and cause further splits.

    • 1 mark for stating that a neutron strikes a heavy nucleus, which splits and releases energy
    • 1 mark for stating that each split releases extra neutrons
    • 1 mark for stating that these neutrons cause further nuclei to split
  2. 2.Identify[1 mark]

    Identify the part of a reactor that absorbs neutrons to regulate the fission rate.

    Show mark schemeHide mark scheme

    Model answer

    The control rods.

    • 1 mark for identifying control rods
  3. 3.Explain[3 marks]

    Explain how heat from fission is converted into electricity in a nuclear power plant.

    Show mark schemeHide mark scheme

    Model answer

    The heat boils water to make high-pressure steam. The steam spins a turbine. The turbine drives a generator, which produces electricity.

    • 1 mark for stating that the heat boils water to make steam
    • 1 mark for stating that the steam spins a turbine
    • 1 mark for stating that the turbine drives a generator that produces electricity
  4. 4.Identify[2 marks]

    Identify two risks or drawbacks of using nuclear power.

    Show mark schemeHide mark scheme

    Model answer

    Accidents such as a meltdown can release radioactive material. Spent fuel stays hazardous for a very long time and needs long-term storage.

    • 1 mark for identifying one valid risk or drawback, such as an accident or meltdown
    • 1 mark for identifying a second valid risk or drawback, such as radioactive waste or uranium mining
  5. 5.Justify[3 marks]

    Justify why spent fuel must be stored for a very long time.

    Show mark schemeHide mark scheme

    Model answer

    Spent fuel is still hot and highly radioactive. Some of its materials have long half-lives, so they stay hazardous for thousands of years. Long isolation protects people and the environment from radiation.

    • 1 mark for stating that spent fuel remains hot and radioactive
    • 1 mark for linking long half-lives to hazards lasting thousands of years
    • 1 mark for stating that isolation protects people and the environment

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy[1 mark]

Why does the fission reaction itself release no carbon dioxide?
Show answer and explanation

Answer: B · Worked explanation

Fission splits heavy nuclei rather than reacting fuel with oxygen, so no carbon dioxide forms from the reaction. Control rods absorb neutrons, not gases. The idea that uranium burns completely confuses fission with combustion, which does not occur in a reactor core.
4.

Medium[1 mark]

Which sequence correctly shows how fission heat becomes electricity?
Show answer and explanation

Answer: D · Worked explanation

Fission heat boils water into steam, the steam spins a turbine, and the turbine drives a generator that produces electricity. The generator cannot turn the turbine in this chain, and control rods regulate fission rather than boil water, so the other sequences misassign the roles.
5.

Medium[1 mark]

Operators lower the control rods deeper into a reactor core. What is the most likely result?
Show answer and explanation

Answer: C · Worked explanation

Control rods absorb neutrons, so lowering them leaves fewer neutrons to cause new splits. The chain reaction slows and the core produces less heat. The claim that the rods add neutrons reverses their role, which would speed fission rather than slow it.
6.

Medium·Calculate[2 marks]

A radioactive sample has a half-life of 20 years. What fraction of its nuclei remains undecayed after 60 years?
Show answer and explanation

Answer: B · Worked explanation

Sixty years is 6020=3\frac{60}{20}=32060​=3 half-lives. Each half-life halves the remaining nuclei, so the fraction is 12×12×12=18\frac{1}{2}\times\frac{1}{2}\times\frac{1}{2}=\frac{1}{8}21​×21​×21​=81​. The value 16\frac{1}{6}61​ comes from multiplying 2 by 3 instead of halving three times, and 14\frac{1}{4}41​ would be the fraction after only two half-lives.
7.

Medium[1 mark]

Which statement is a benefit of nuclear power compared with a coal-fired power plant?
Show answer and explanation

Answer: A · Worked explanation

Because fission does not burn fuel, the reaction releases neither carbon dioxide nor sulfur dioxide. Nuclear plants do still make spent fuel that needs long-term storage, and uranium must be mined. They also release waste heat through cooling water or towers, so the other statements are false.
8.

Hard[2 marks]

Which statement about spent fuel is correct?
Show answer and explanation

Answer: D · Worked explanation

Spent fuel is still hot and highly radioactive when it leaves the core, so it is cooled for years in deep water pools that also block radiation. Later it may move to dry casks. Claiming it becomes harmless ignores long half-lives that keep it hazardous for thousands of years.
9.

Hard[2 marks]

A student says that a nuclear plant can explode like a nuclear bomb. Which correction is best?
Show answer and explanation

Answer: B · Worked explanation

A reactor is designed to run a controlled chain reaction, and the main accident risk is a meltdown that releases radioactive material. Saying reactors are never dangerous ignores that risk. Describing a fuel fire confuses fission with combustion, since uranium is not burned in air.
10.

Hard[2 marks]

A region replaces a coal plant with a nuclear plant of the same output. Which concern is newly introduced?
Show answer and explanation

Answer: C · Worked explanation

Spent fuel is a hazard specific to nuclear plants, because it stays radioactive for a very long time. The reaction itself does not emit sulfur dioxide or carbon dioxide, and uranium is not burned. Waste heat is not new, since coal plants also release large amounts of it.

Keep going

Next topic6.7 Energy from biomassPrevious topic6.5 Fossil fuels

More in Unit 6 · Energy Resources and Consumption

  1. 6.2Global energy consumptionNotes · 10 questions
  2. 6.3Fuel types and usesNotes · 10 questions
  3. 6.4Distribution of energy resourcesNotes · 10 questions
  4. 6.5Fossil fuelsNotes · 10 questions
  5. 6.6Nuclear powerNotes · 10 questions
  6. 6.7Energy from biomassNotes · 10 questions
  7. 6.8Solar energyNotes · 10 questions
  8. 6.9Hydroelectric powerNotes · 10 questions
  9. 6.10Geothermal energyNotes · 10 questions

All AP Environmental Science topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/5 read

  1. 1Nuclear power gets its heat from splitting atoms
  2. 2A reactor core keeps the chain reaction under control
  3. 3Fission heat is turned into electricity using steam
  4. 4Nuclear power avoids air pollution but carries serious risks
  5. 5Spent fuel stays dangerous and needs long-term storage
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe