Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Physics 1
  3. ›5 Torque and Rotational Dynamics
  4. ›5.3 Torque

AP Physics 1 · Unit 5 · Torque and Rotational Dynamics

5.3 Torque

Define torque, calculate it from force, distance and angle, and decide whether it turns an object clockwise or counterclockwise.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5A force far from the pivot turns an object more easily
  1. 1A force far from the pivot turns an object more easily
  2. 2Torque combines force, distance and angle in one formula
  3. 3Only the part of the force perpendicular to the rod counts
  4. 4Calculating torque takes a distance, a force and an angle
  5. 5The direction of rotation decides the sign of a torque
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: A force far from the pivot turns an object more easily

Try pushing a door open near its hinges. It resists. Push at the handle, and the door swings easily. The force is the same, but its effect on rotation is not.

The turning effect of a force is called torque. Torque is measured about a chosen axis of rotation, the fixed line an object turns around. Three things set its size: the force, the distance from the axis, and the angle at which the force acts.

Torque always depends on the axis you choose. Name the axis before you start any calculation.

Key terms · tap one for its definition

torque

The turning effect of a force about an axis; its magnitude is rFsin⁡θrF\sin\thetarFsinθ, measured in N m\mathrm{N\,m}Nm.

axis of rotation

The fixed line about which an object turns, or would turn; every torque is calculated relative to it.

Part 1 done

2

Part 2 of 5: Torque combines force, distance and angle in one formula

Now we need one rule that captures all three factors. Let rrr be the distance from the axis to the point where the force acts. Let θ\thetaθ be the angle between the vector r⃗\vec{r}r and the force F⃗\vec{F}F.

The magnitude of the torque is τ=rFsin⁡θ\tau = rF\sin\thetaτ=rFsinθ. Its unit is the newton-meter, N m\mathrm{N\,m}Nm. A larger force, a larger distance, or an angle closer to 90∘90^\circ90∘ all give a larger torque.

Figure 1. The distance r runs from the axis to where the force acts. Only the dashed vertical part of the force, F sin θ, turns the rod.

Part 2 done

Quick check

One question on the part you just read

Easy

State the SI unit of torque.
Show answer and explanation

Answer: D · Worked explanation

Torque is a force multiplied by a distance, so its unit is the newton-meter. Newtons per meter measure how stiff a spring is, and newton-seconds measure impulse. Kilogram-meters per second measure linear momentum. None of these describes a turning effect. The newton-meter has the same base units as the joule, but torque is not an energy.
3

Part 3 of 5: Only the part of the force perpendicular to the rod counts

The angle matters because direction matters. Push straight along a door toward its hinge, and the door does not turn at all. Only the component of the force perpendicular to r⃗\vec{r}r twists the object.

The same idea can be stated with the lever arm. This is the perpendicular distance from the axis to the line along which the force acts. It equals rsin⁡θr\sin\thetarsinθ, so τ=r⊥F\tau = r_{\perp}Fτ=r⊥​F.

Effect of the angle for fixed r and F

Angle between r and Fsin θTorque
0° (force along the rod)0Zero
30°0.50Half of the maximum
90°1Maximum, rF
180° (force along the rod)0Zero
Angle between r and F
0° (force along the rod)
sin θ
0
Torque
Zero
Angle between r and F
30°
sin θ
0.50
Torque
Half of the maximum
Angle between r and F
90°
sin θ
1
Torque
Maximum, rF
Angle between r and F
180° (force along the rod)
sin θ
0
Torque
Zero

Common mistake

The angle in the formula is between r⃗\vec{r}r and F⃗\vec{F}F, not between the force and the vertical. Check which angle a problem actually gives.

Key term

lever arm

The perpendicular distance from the axis to the line of action of the force, equal to rsin⁡θr\sin\thetarsinθ.

Part 3 done

4

Part 4 of 5: Calculating torque takes a distance, a force and an angle

Suppose you pull on a wrench to loosen a bolt. Identify the axis first, then find rrr, FFF and θ\thetaθ. A quick sketch helps you see which angle the problem gives. Then substitute into τ=rFsin⁡θ\tau = rF\sin\thetaτ=rFsinθ. Check that your calculator is set to degrees before you evaluate the sine.

Worked example

Torque from an angled pull

A 40 N force acts on a wrench at a point 0.25 m from the bolt. The force makes a 60° angle with the wrench. Calculate the torque.
  1. 1
    Write the formula: τ=rFsin⁡θ\tau = rF\sin\thetaτ=rFsinθ.
  2. 2
    Substitute: τ=(0.25 m)(40 N)sin⁡60∘\tau = (0.25\ \mathrm{m})(40\ \mathrm{N})\sin 60^\circτ=(0.25 m)(40 N)sin60∘.
  3. 3
    Evaluate: sin⁡60∘≈0.866\sin 60^\circ \approx 0.866sin60∘≈0.866, so τ=10×0.866 N m\tau = 10 \times 0.866\ \mathrm{N\,m}τ=10×0.866 Nm.

Answer: The torque is about 8.7 N m8.7\ \mathrm{N\,m}8.7 Nm.

A perpendicular pull would give the maximum torque for these values, 10 N m10\ \mathrm{N\,m}10 Nm. Any other angle gives less.

Part 4 done

Quick check

One question on the part you just read

Easy

A force acts perpendicular to a wrench. Which change alone would double the torque about the bolt?
Show answer and explanation

Answer: B · Worked explanation

Torque is proportional to rrr when the force stays perpendicular, so doubling rrr doubles τ\tauτ. Pushing for longer does not change the torque, because torque depends on force, distance and angle, not time. The most tempting wrong option halves the distance, which would halve the torque.
5

Part 5 of 5: The direction of rotation decides the sign of a torque

Torque also has a direction. Look at the object and imagine the force pushing at its point of application. A torque that would turn the object like the hands of a clock is clockwise. The opposite turn is counterclockwise.

Physics problems usually count counterclockwise torque as positive and clockwise torque as negative. When several forces act, add the signed values. The result is the net torque, the combined effect of all torques about the same axis.

Worked example

Adding two torques

A horizontal bar pivots at its center. A 5.0 N downward force acts 0.40 m to the right of the pivot. A 3.0 N downward force acts 0.20 m to the left. Find the net torque.
  1. 1
    Right force pushes the right end down: clockwise, −(5.0)(0.40)=−2.0 N m-(5.0)(0.40) = -2.0\ \mathrm{N\,m}−(5.0)(0.40)=−2.0 Nm.
  2. 2
    Left force pushes the left end down: counterclockwise, +(3.0)(0.20)=+0.60 N m+(3.0)(0.20) = +0.60\ \mathrm{N\,m}+(3.0)(0.20)=+0.60 Nm.
  3. 3
    Add: −2.0+0.60=−1.4 N m-2.0 + 0.60 = -1.4\ \mathrm{N\,m}−2.0+0.60=−1.4 Nm.

Answer: The net torque is 1.4 N m1.4\ \mathrm{N\,m}1.4 Nm clockwise.

Exam tip

State your axis and sign convention before adding torques. Then a positive answer means counterclockwise.

Key term

net torque

The signed sum of all torques about one axis, with clockwise and counterclockwise torques given opposite signs.

Note read

Check your recall[12 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[2 marks]

    State what torque measures and give its SI unit.

    Show mark schemeHide mark scheme

    Model answer

    Torque measures how effectively a force changes an object's rotation about an axis. Its SI unit is the newton-meter.

    • 1 mark for stating that torque is the turning effect of a force about an axis
    • 1 mark for giving the unit as the newton-meter (N m\mathrm{N\,m}Nm)
  2. 2.Explain[2 marks]

    Explain why pushing a door directly toward its hinges does not make it turn.

    Show mark schemeHide mark scheme

    Model answer

    The force is parallel to the line from the hinge, so the angle between r⃗\vec{r}r and F⃗\vec{F}F is 0∘0^\circ0∘ and sin⁡θ=0\sin\theta = 0sinθ=0. Only the perpendicular component of a force produces torque.

    • 1 mark for stating that the force is along the line from the axis (angle 0∘0^\circ0∘ or lever arm zero)
    • 1 mark for explaining that only the perpendicular component of force produces torque
  3. 3.Calculate[2 marks]

    Calculate the torque of a 15 N force applied perpendicular to a lever, 0.60 m from the axis.

    Show mark schemeHide mark scheme

    Model answer

    τ=rFsin⁡90∘=(0.60)(15)(1)=9.0 N m\tau = rF\sin 90^\circ = (0.60)(15)(1) = 9.0\ \mathrm{N\,m}τ=rFsin90∘=(0.60)(15)(1)=9.0 Nm.

    • 1 mark for substituting r=0.60 mr = 0.60\ \mathrm{m}r=0.60 m, F=15 NF = 15\ \mathrm{N}F=15 N and sin⁡90∘=1\sin 90^\circ = 1sin90∘=1
    • 1 mark for giving 9.0 N m9.0\ \mathrm{N\,m}9.0 Nm with the correct unit
  4. 4.Calculate[3 marks]

    Calculate the magnitude of the torque when a 20 N force acts at 30° to a rod, 0.50 m from the axis.

    Show mark schemeHide mark scheme

    Model answer

    τ=rFsin⁡θ=(0.50)(20)sin⁡30∘=(10)(0.50)=5.0 N m\tau = rF\sin\theta = (0.50)(20)\sin 30^\circ = (10)(0.50) = 5.0\ \mathrm{N\,m}τ=rFsinθ=(0.50)(20)sin30∘=(10)(0.50)=5.0 Nm.

    • 1 mark for writing τ=rFsin⁡θ\tau = rF\sin\thetaτ=rFsinθ
    • 1 mark for substituting the values with sin⁡30∘=0.50\sin 30^\circ = 0.50sin30∘=0.50
    • 1 mark for giving 5.0 N m5.0\ \mathrm{N\,m}5.0 Nm
  5. 5.Determine[3 marks]

    Determine the net torque about a pivot when a 6.0 N downward force acts 0.20 m to the right of it and a 2.0 N downward force acts 0.50 m to the left.

    Show mark schemeHide mark scheme

    Model answer

    The right force gives 1.2 N m1.2\ \mathrm{N\,m}1.2 Nm clockwise. The left force gives 1.0 N m1.0\ \mathrm{N\,m}1.0 Nm counterclockwise. The net torque is 0.20 N m0.20\ \mathrm{N\,m}0.20 Nm clockwise.

    • 1 mark for finding 1.2 N m1.2\ \mathrm{N\,m}1.2 Nm clockwise for the right force
    • 1 mark for finding 1.0 N m1.0\ \mathrm{N\,m}1.0 Nm counterclockwise for the left force
    • 1 mark for subtracting to give 0.20 N m0.20\ \mathrm{N\,m}0.20 Nm clockwise

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

Identify the angle between r⃗\vec{r}r and F⃗\vec{F}F that gives the largest torque for fixed rrr and FFF.
Show answer and explanation

Answer: A · Worked explanation

Torque is rFsin⁡θrF\sin\thetarFsinθ, and sin⁡θ\sin\thetasinθ reaches its maximum value of 1 at 90∘90^\circ90∘. At 0∘0^\circ0∘ and 180∘180^\circ180∘ the force lies along the line from the axis, so the torque is zero. A 45∘45^\circ45∘ angle gives sin⁡θ≈0.71\sin\theta \approx 0.71sinθ≈0.71, which is large but not the maximum.
4.

Medium·Calculate[2 marks]

Calculate the torque when a 50 N force acts perpendicular to a lever at a point 0.30 m from the axis.
Show answer and explanation

Answer: A · Worked explanation

For a perpendicular force, τ=rF=(0.30 m)(50 N)=15 N m\tau = rF = (0.30\ \mathrm{m})(50\ \mathrm{N}) = 15\ \mathrm{N\,m}τ=rF=(0.30 m)(50 N)=15 Nm. Dividing the force by the distance gives 167, which is a different quantity and has the wrong unit. A decimal slip produces 1.5 or 150, so check the order of magnitude.
5.

Medium·Calculate[2 marks]

Calculate the torque from a 12 N force that makes a 30∘30^\circ30∘ angle with a rod, acting 0.50 m from the axis.
Show answer and explanation

Answer: D · Worked explanation

Use τ=rFsin⁡θ=(0.50)(12)sin⁡30∘=6.0×0.50=3.0 N m\tau = rF\sin\theta = (0.50)(12)\sin 30^\circ = 6.0 \times 0.50 = 3.0\ \mathrm{N\,m}τ=rFsinθ=(0.50)(12)sin30∘=6.0×0.50=3.0 Nm. Leaving out the sine gives 6.0. Using the cosine instead gives 5.2, which would be correct only if the angle were measured from the perpendicular. The angle here is measured from the rod.
6.

Medium·Predict[2 marks]

A horizontal bar pivots at its center. A vertical upward force pushes on its right half. Predict the direction in which the bar tends to rotate.
Show answer and explanation

Answer: B · Worked explanation

Imagine the force lifting the right side while the pivot stays fixed. The right end rises and the left end falls, which is a counterclockwise turn. A vertical force on a horizontal bar is perpendicular to it, so it gives the maximum torque, not zero. The direction of the force alone does not set the rotation direction.
7.

Medium·Determine[2 marks]

A horizontal bar pivots at its center. A 6.0 N upward force acts 0.50 m to the right of the pivot. An 8.0 N downward force acts 0.25 m to the right of the pivot. Determine the net torque.
Show answer and explanation

Answer: D · Worked explanation

The 6.0 N force lifts the right side: +3.0 N m+3.0\ \mathrm{N\,m}+3.0 Nm, counterclockwise. The 8.0 N force pushes the right side down: −2.0 N m-2.0\ \mathrm{N\,m}−2.0 Nm, clockwise. The sum is +1.0 N m+1.0\ \mathrm{N\,m}+1.0 Nm. Adding the two magnitudes ignores the opposite directions and gives 5.0, which is wrong.
8.

Hard·Calculate[2 marks]

A 20 N force acts at a point 0.80 m from an axis. Its line of action passes 0.20 m (perpendicular distance) from the axis. Calculate the torque.
Show answer and explanation

Answer: B · Worked explanation

The torque is force times the lever arm, the perpendicular distance from the axis to the line of action. So τ=(20)(0.20)=4.0 N m\tau = (20)(0.20) = 4.0\ \mathrm{N\,m}τ=(20)(0.20)=4.0 Nm. Using 0.80 m gives 16, which would be the torque only if the force were perpendicular to r⃗\vec{r}r. Multiplying by both distances gives 3.2, which has no physical meaning here.
9.

Hard·Predict[2 marks]

A 30 N force acts perpendicular to a rod at 0.40 m from the axis. The point of application is then moved to 0.80 m and the force is rotated to make 30∘30^\circ30∘ with the rod. Predict how the torque changes.
Show answer and explanation

Answer: D · Worked explanation

At first, τ=(0.40)(30)=12 N m\tau = (0.40)(30) = 12\ \mathrm{N\,m}τ=(0.40)(30)=12 Nm. Afterward, τ=(0.80)(30)sin⁡30∘=24×0.50=12 N m\tau = (0.80)(30)\sin 30^\circ = 24 \times 0.50 = 12\ \mathrm{N\,m}τ=(0.80)(30)sin30∘=24×0.50=12 Nm. The doubled distance is exactly cancelled by the factor sin⁡30∘=0.50\sin 30^\circ = 0.50sin30∘=0.50. Looking only at the distance suggests a doubling, which ignores the angle.
10.

Hard·Calculate[2 marks]

A person pushes a 0.90 m wide door at its handle with a 20 N force perpendicular to the door. A second person pushes at a point 0.45 m from the hinges, also perpendicular. Calculate the force needed for the same torque.
Show answer and explanation

Answer: A · Worked explanation

The first torque is (0.90)(20)=18 N m(0.90)(20) = 18\ \mathrm{N\,m}(0.90)(20)=18 Nm. For the same torque at 0.45 m, F=18/0.45=40 NF = 18/0.45 = 40\ \mathrm{N}F=18/0.45=40 N. Halving the distance means the force must double. Choosing 10 N10\ \mathrm{N}10 N reverses that relationship, and choosing 20 N20\ \mathrm{N}20 N ignores the distance entirely.

Keep going

Next topic5.4 Rotational inertiaPrevious topic5.2 Linear and rotational motion

More in Unit 5 · Torque and Rotational Dynamics

  1. 5.1Rotational kinematicsNotes · 10 questions
  2. 5.2Linear and rotational motionNotes · 10 questions
  3. 5.3TorqueNotes · 10 questions
  4. 5.4Rotational inertiaNotes · 10 questions
  5. 5.5Rotational equilibriumNotes · 10 questions
  6. 5.6Newton's second law for rotationNotes · 10 questions

All AP Physics 1 topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/5 read

  1. 1A force far from the pivot turns an object more easily
  2. 2Torque combines force, distance and angle in one formula
  3. 3Only the part of the force perpendicular to the rod counts
  4. 4Calculating torque takes a distance, a force and an angle
  5. 5The direction of rotation decides the sign of a torque
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe