Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Physics 1
  3. ›5 Torque and Rotational Dynamics
  4. ›5.5 Rotational equilibrium

AP Physics 1 · Unit 5 · Torque and Rotational Dynamics

5.5 Rotational equilibrium

State the conditions for rotational equilibrium, test whether a system is balanced, and solve for unknown forces and distances.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Balanced torques keep an object from changing its spin
  1. 1Balanced torques keep an object from changing its spin
  2. 2Full balance needs zero net force and zero net torque
  3. 3Any axis works, so pick the one that removes unknowns
  4. 4A seesaw gives the simplest torque balance
  5. 5Beams on supports follow the same two conditions
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Balanced torques keep an object from changing its spin

A seesaw with two children can sit perfectly level. Each child tries to turn it, but the two effects cancel. The seesaw is then in rotational equilibrium.

In rotational equilibrium, the net torque about any axis is zero. The angular velocity therefore stays constant. For an object that is not turning at all, that means it stays still. The total torque, not the total force, decides whether spin changes.

Key terms · tap one for its definition

rotational equilibrium

The condition in which the net torque about an axis is zero, so the angular velocity does not change.

net torque

The signed sum of all torques about the same axis, with clockwise and counterclockwise torques given opposite signs.

Part 1 done

2

Part 2 of 5: Full balance needs zero net force and zero net torque

Zero net torque alone does not stop an object from sliding. Zero net force alone does not stop it from rotating. A pair of equal and opposite forces at different points can twist an object even though the forces cancel.

An object at rest that meets both conditions is in static equilibrium. The conditions are ∑F⃗=0\sum \vec{F} = 0∑F=0 and ∑τ=0\sum \tau = 0∑τ=0.

Common mistake

Equilibrium does not mean the object is at rest. It may move at constant velocity or rotate at constant angular velocity.

Key term

static equilibrium

The state of an object at rest with zero net force and zero net torque.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the condition that must hold for an object to be in rotational equilibrium.
Show answer and explanation

Answer: B · Worked explanation

Rotational equilibrium requires the net torque to be zero, which keeps angular velocity constant. The object need not be at rest, because it can still spin at a constant rate. A zero net force does not guarantee zero net torque, so it is not enough on its own. The condition must involve torque directly.
3

Part 3 of 5: Any axis works, so pick the one that removes unknowns

If an object is in equilibrium, the net torque is zero about every point. You can therefore choose the axis freely. A good choice places the axis where an unknown force acts.

A force acting through the axis has r=0r = 0r=0, so its torque is zero. That unknown drops out of the torque equation, and the algebra gets shorter.

  • Sketch the object and mark every force.
  • Choose an axis that removes an unknown force.
  • Write each torque as a signed value, counterclockwise positive.
  • Set the sum of torques equal to zero.
  • Use the force equation for anything left.

Part 3 done

4

Part 4 of 5: A seesaw gives the simplest torque balance

Now apply the method to a seesaw. Gravity acts on both children, so ggg appears on each side of the equation and cancels. This shortcut works whenever only weights create the torques.

Worked example

Balancing a seesaw

A uniform seesaw balances on a pivot at its center. A 20 kg child sits 1.5 m to the left of the pivot. Find the mass of a child sitting 1.0 m to the right.
  1. 1
    Choose the pivot as the axis. The support force and the seesaw's own weight act through it and have zero torque.
  2. 2
    Left child, counterclockwise: m1gr1=(20)(g)(1.5)m_1 g r_1 = (20)(g)(1.5)m1​gr1​=(20)(g)(1.5).
  3. 3
    Right child, clockwise: m2gr2=m2(g)(1.0)m_2 g r_2 = m_2 (g)(1.0)m2​gr2​=m2​(g)(1.0).
  4. 4
    Set the two equal: (20)(1.5)=m2(1.0)(20)(1.5) = m_2(1.0)(20)(1.5)=m2​(1.0). The factor ggg cancels.
  5. 5
    Solve: m2=30 kgm_2 = 30\ \mathrm{kg}m2​=30 kg.

Answer: The child on the right has a mass of 30 kg.

The heavier child sits closer to the pivot. That pattern holds for every balanced lever. A lighter child must sit farther out to balance a heavier one. Check the result by multiplying: (20)(1.5)(20)(1.5)(20)(1.5) and (30)(1.0)(30)(1.0)(30)(1.0) both equal 30.

Part 4 done

Quick check

One question on the part you just read

Easy

An object spins at a constant angular velocity, and the net torque on it is zero. Which statement is correct?
Show answer and explanation

Answer: C · Worked explanation

A zero net torque leaves the angular velocity unchanged, which meets the condition for rotational equilibrium. Equilibrium describes a constant state of rotation, not a lack of it. The option claiming the object must be at rest confuses rotational equilibrium with static equilibrium.
5

Part 5 of 5: Beams on supports follow the same two conditions

Many problems show a plank resting on two supports. A uniform plank's weight acts at its center. Each support pushes up with an unknown force. Use the torque condition once to find one force, then the force condition to find the other. The support nearer the load carries the larger share.

Figure 1. Upward support forces F₁ and F₂ balance the two downward weights. Choosing the left end as the axis removes F₁ from the torque equation.

Worked example

A loaded plank

A uniform 6.0 m plank of mass 12 kg rests on supports at its two ends. A 60 kg person stands 2.0 m from the left end. Find the force from each support. Use g=10 m/s2g = 10\ \mathrm{m/s^2}g=10 m/s2.
  1. 1
    Choose the left end as the axis. The left support then has zero torque.
  2. 2
    Weights: plank 120 N120\ \mathrm{N}120 N at 3.0 m, person 600 N600\ \mathrm{N}600 N at 2.0 m.
  3. 3
    Clockwise torques: (120)(3.0)+(600)(2.0)=360+1200=1560 N m(120)(3.0) + (600)(2.0) = 360 + 1200 = 1560\ \mathrm{N\,m}(120)(3.0)+(600)(2.0)=360+1200=1560 Nm.
  4. 4
    Right support, counterclockwise: F2(6.0)=1560F_2(6.0) = 1560F2​(6.0)=1560, so F2=260 NF_2 = 260\ \mathrm{N}F2​=260 N.
  5. 5
    Vertical forces: F1+F2=120+600=720F_1 + F_2 = 120 + 600 = 720F1​+F2​=120+600=720, so F1=460 NF_1 = 460\ \mathrm{N}F1​=460 N.

Answer: The left support pushes up with 460 N460\ \mathrm{N}460 N and the right support with 260 N260\ \mathrm{N}260 N.

Exam tip

Show the axis you chose. Write each torque as force times perpendicular distance, with its direction.

Note read

Check your recall[13 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[2 marks]

    State the two conditions for an object to be in static equilibrium.

    Show mark schemeHide mark scheme

    Model answer

    The net force on the object must be zero. The net torque about any axis must also be zero.

    • 1 mark for stating that the net force is zero
    • 1 mark for stating that the net torque is zero
  2. 2.Explain[3 marks]

    Explain why the axis can be chosen anywhere in an equilibrium problem, and why a point where an unknown force acts is a good choice.

    Show mark schemeHide mark scheme

    Model answer

    In equilibrium the net torque is zero about every point, so any axis is valid. A force acting at the axis has zero lever arm and therefore zero torque. The unknown force drops out of the torque equation.

    • 1 mark for stating that the net torque is zero about every point in equilibrium
    • 1 mark for stating that a force acting at the axis has zero torque (zero lever arm)
    • 1 mark for explaining that this removes an unknown from the equation
  3. 3.Calculate[3 marks]

    Calculate the force needed 0.80 m to the right of a pivot to balance a 24 N downward force 0.50 m to the left of the pivot.

    Show mark schemeHide mark scheme

    Model answer

    Counterclockwise torque is (24)(0.50)=12 N m(24)(0.50) = 12\ \mathrm{N\,m}(24)(0.50)=12 Nm. Setting F(0.80)=12F(0.80) = 12F(0.80)=12 gives F=15 NF = 15\ \mathrm{N}F=15 N, acting downward.

    • 1 mark for finding the torque of the 24 N force as 12 N m12\ \mathrm{N\,m}12 Nm
    • 1 mark for setting the two torques equal, F(0.80)=12F(0.80) = 12F(0.80)=12
    • 1 mark for obtaining 15 N15\ \mathrm{N}15 N
  4. 4.Determine[3 marks]

    Determine whether a bar is in rotational equilibrium when a 10 N force produces a clockwise torque at 0.30 m and a 6.0 N force produces a counterclockwise torque at 0.40 m about the same axis.

    Show mark schemeHide mark scheme

    Model answer

    The clockwise torque is (10)(0.30)=3.0 N m(10)(0.30) = 3.0\ \mathrm{N\,m}(10)(0.30)=3.0 Nm. The counterclockwise torque is (6.0)(0.40)=2.4 N m(6.0)(0.40) = 2.4\ \mathrm{N\,m}(6.0)(0.40)=2.4 Nm. The net torque is 0.6 N m0.6\ \mathrm{N\,m}0.6 Nm clockwise, so the bar is not in rotational equilibrium.

    • 1 mark for finding 3.0 N m3.0\ \mathrm{N\,m}3.0 Nm clockwise
    • 1 mark for finding 2.4 N m2.4\ \mathrm{N\,m}2.4 Nm counterclockwise
    • 1 mark for concluding that the net torque is not zero, so it is not in equilibrium
  5. 5.Explain[2 marks]

    Explain how two equal and opposite forces can give zero net force yet still rotate an object.

    Show mark schemeHide mark scheme

    Model answer

    The forces cancel, so the net force is zero. If they act along different lines, they produce torques in the same direction about the axis. The net torque is then not zero.

    • 1 mark for stating that the forces cancel to give zero net force
    • 1 mark for explaining that they act along different lines and give a nonzero net torque

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·State[1 mark]

State which pair of equations describes static equilibrium.
Show answer and explanation

Answer: C · Worked explanation

An object at rest stays at rest only if both the net force and the net torque are zero. Zero net force alone allows rotation, as with two equal and opposite forces at different points. Zero net torque alone allows sliding. Both conditions are needed.
4.

Medium·Calculate[2 marks]

A uniform seesaw balances on a central pivot. A 30 kg child sits 2.0 m from the pivot. Calculate the mass of a child who balances it at 1.5 m on the other side.
Show answer and explanation

Answer: C · Worked explanation

The torques must match: (30)(g)(2.0)=m(g)(1.5)(30)(g)(2.0) = m(g)(1.5)(30)(g)(2.0)=m(g)(1.5), so m=60/1.5=40 kgm = 60/1.5 = 40\ \mathrm{kg}m=60/1.5=40 kg. A child farther from the pivot needs a smaller partner, and a closer partner must be heavier. The 22.5 kg22.5\ \mathrm{kg}22.5 kg option inverts the distance ratio, and the 30 kg30\ \mathrm{kg}30 kg option ignores the distances altogether.
5.

Medium·Determine[2 marks]

A bar pivots at a fixed axis. An 8.0 N force gives a clockwise torque at 0.50 m, and a 5.0 N force gives a counterclockwise torque at 0.60 m. Determine the net torque.
Show answer and explanation

Answer: D · Worked explanation

The clockwise torque is (8.0)(0.50)=4.0 N m(8.0)(0.50) = 4.0\ \mathrm{N\,m}(8.0)(0.50)=4.0 Nm. The counterclockwise torque is (5.0)(0.60)=3.0 N m(5.0)(0.60) = 3.0\ \mathrm{N\,m}(5.0)(0.60)=3.0 Nm. The larger one wins, so the net is 1.0 N m1.0\ \mathrm{N\,m}1.0 Nm clockwise. The counterclockwise option picks the wrong winner, and 7.0 adds the magnitudes even though the two torques oppose each other.
6.

Medium·Predict[2 marks]

Two equal and opposite 5.0 N forces act on a bar at points 0.20 m apart, each perpendicular to the bar. Predict which statement is correct.
Show answer and explanation

Answer: B · Worked explanation

The forces cancel as vectors, so the net force is zero. Their lines of action are separate, so about the midpoint they give torques in the same direction, each equal to (5.0)(0.10)=0.50 N m(5.0)(0.10) = 0.50\ \mathrm{N\,m}(5.0)(0.10)=0.50 Nm. The net torque is 1.0 N m1.0\ \mathrm{N\,m}1.0 Nm, so the bar rotates.
7.

Medium·Calculate[2 marks]

A uniform 4.0 m plank of mass 10 kg rests on supports at its two ends with nothing else on it. Calculate the force from each support. Use g=10 m/s2g = 10\ \mathrm{m/s^2}g=10 m/s2.
Show answer and explanation

Answer: D · Worked explanation

The weight is (10)(10)=100 N(10)(10) = 100\ \mathrm{N}(10)(10)=100 N and acts at the center. By symmetry, or by taking torques about one end, each support carries half: 50 N50\ \mathrm{N}50 N. Giving each support the full weight, 100 N100\ \mathrm{N}100 N, would make the upward forces total twice the weight, violating the force condition.
8.

Hard·Calculate[2 marks]

A uniform 4.0 m beam weighing 200 N rests on supports at its two ends. A 100 N load sits 1.0 m from the left end. Calculate the force from the right support.
Show answer and explanation

Answer: D · Worked explanation

Take torques about the left end: F2(4.0)=(200)(2.0)+(100)(1.0)=500F_2(4.0) = (200)(2.0) + (100)(1.0) = 500F2​(4.0)=(200)(2.0)+(100)(1.0)=500, so F2=125 NF_2 = 125\ \mathrm{N}F2​=125 N. The left support then carries 300−125=175 N300 - 125 = 175\ \mathrm{N}300−125=175 N, which is the tempting wrong option. The right support carries less because the load sits nearer the left end.
9.

Hard·Identify[2 marks]

A beam rests on two supports with unknown upward forces F1F_1F1​ at the left end and F2F_2F2​ at the right end. Identify the axis that gives a torque equation containing only F2F_2F2​.
Show answer and explanation

Answer: C · Worked explanation

A force through the axis has zero torque. Placing the axis at the left end removes F1F_1F1​ and leaves F2F_2F2​ as the only unknown force. The right end removes F2F_2F2​ instead. The center leaves both unknown. Any point is valid, but only the left end gives an equation with F2F_2F2​ alone.
10.

Hard·Calculate[2 marks]

A uniform horizontal beam of weight 50 N and length 2.0 m is hinged at a wall. A vertical cable at the far end holds it level, and a 30 N load hangs from the far end. Calculate the cable tension.
Show answer and explanation

Answer: A · Worked explanation

Take torques about the hinge, which removes the unknown hinge force: T(2.0)=(50)(1.0)+(30)(2.0)=110T(2.0) = (50)(1.0) + (30)(2.0) = 110T(2.0)=(50)(1.0)+(30)(2.0)=110. So T=55 NT = 55\ \mathrm{N}T=55 N. Setting the tension equal to the total weight, 80 N80\ \mathrm{N}80 N, uses only the force condition and ignores that the hinge also pushes up. Stopping at 110 forgets to divide by the 2.0 m.

Keep going

Next topic5.6 Newton's second law for rotationPrevious topic5.4 Rotational inertia

More in Unit 5 · Torque and Rotational Dynamics

  1. 5.1Rotational kinematicsNotes · 10 questions
  2. 5.2Linear and rotational motionNotes · 10 questions
  3. 5.3TorqueNotes · 10 questions
  4. 5.4Rotational inertiaNotes · 10 questions
  5. 5.5Rotational equilibriumNotes · 10 questions
  6. 5.6Newton's second law for rotationNotes · 10 questions

All AP Physics 1 topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/5 read

  1. 1Balanced torques keep an object from changing its spin
  2. 2Full balance needs zero net force and zero net torque
  3. 3Any axis works, so pick the one that removes unknowns
  4. 4A seesaw gives the simplest torque balance
  5. 5Beams on supports follow the same two conditions
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe