Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Physics 1
  3. ›5 Torque and Rotational Dynamics
  4. ›5.6 Newton's second law for rotation

AP Physics 1 · Unit 5 · Torque and Rotational Dynamics

5.6 Newton's second law for rotation

Use Newton's second law for rotation to relate net torque, rotational inertia and angular acceleration, and solve related problems.

  • 3 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5A net torque changes spin the way a net force changes motion
  1. 1A net torque changes spin the way a net force changes motion
  2. 2Net torque equals rotational inertia times angular acceleration
  3. 3Angular acceleration comes from net torque divided by rotational inertia
  4. 4Opposing torques reduce the angular acceleration
  5. 5The sign of angular acceleration follows the net torque
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: A net torque changes spin the way a net force changes motion

A steady net force on a cart changes its velocity. A steady net torque on a wheel changes its spin in the same way. The wheel can speed up, slow down, or reverse its direction.

The rate at which angular velocity changes is the angular acceleration, α\alphaα. Its unit is rad/s2\mathrm{rad/s^2}rad/s2. It is the spinning counterpart of ordinary acceleration. Torque is the cause, and angular acceleration is the effect.

Key term

angular acceleration

The rate of change of angular velocity, α=Δω/Δt\alpha = \Delta\omega / \Delta tα=Δω/Δt, measured in rad/s2\mathrm{rad/s^2}rad/s2.

Part 1 done

2

Part 2 of 5: Net torque equals rotational inertia times angular acceleration

Newton's second law for straight-line motion is ∑F=ma\sum F = ma∑F=ma. The rotational version has the same structure. It is called Newton's second law for rotation: ∑τ=Iα\sum \tau = I\alpha∑τ=Iα.

Net torque replaces net force, rotational inertia replaces mass, and angular acceleration replaces acceleration. Rearranged, α=∑τI\alpha = \frac{\sum \tau}{I}α=I∑τ​. A larger torque gives a larger α\alphaα. A larger III gives a smaller one.

Figure 1. For a fixed net torque, angular acceleration falls as rotational inertia rises. The marked point matches a wheel with a rotational inertia of 0.40 kg m².

Common mistake

When several torques act, do not use only one of them in ∑τ=Iα\sum \tau = I\alpha∑τ=Iα. Add every torque about the axis first.

Key term

Newton's second law for rotation

The net torque on an object about an axis equals its rotational inertia about that axis times its angular acceleration.

Part 2 done

Quick check

One question on the part you just read

Easy

State the SI unit of angular acceleration.
Show answer and explanation

Answer: B · Worked explanation

Angular acceleration is a change in angular velocity, in rad/s, divided by time, in s. That gives rad/s2\mathrm{rad/s^2}rad/s2. The unit rad/s\mathrm{rad/s}rad/s belongs to angular velocity, which is the most tempting wrong option. Newton-meters measure torque, and kilogram-meters squared measure rotational inertia.
3

Part 3 of 5: Angular acceleration comes from net torque divided by rotational inertia

Start by finding the torque from each force. Add them with signs to get the net torque. Then divide by the rotational inertia about the same axis. Mixing axes gives a wrong answer. Keep every quantity in SI units.

Worked example

A wheel pulled by a rope

A wheel has I=0.40 kg m2I = 0.40\ \mathrm{kg\,m^2}I=0.40 kgm2 about its axle. A rope pulls with a steady 20 N force along the tangent of its rim, which has radius 0.30 m. Ignore friction. Find the angular acceleration.
  1. 1
    The force is perpendicular to the radius, so τ=rF=(0.30)(20)=6.0 N m\tau = rF = (0.30)(20) = 6.0\ \mathrm{N\,m}τ=rF=(0.30)(20)=6.0 Nm.
  2. 2
    Apply the law: α=τI=6.00.40\alpha = \frac{\tau}{I} = \frac{6.0}{0.40}α=Iτ​=0.406.0​.
  3. 3
    Calculate: α=15 rad/s2\alpha = 15\ \mathrm{rad/s^2}α=15 rad/s2.

Answer: The angular acceleration is 15 rad/s215\ \mathrm{rad/s^2}15 rad/s2, in the direction of the torque.

Notice that the rope's force and the wheel's radius enter only through the torque. Rotational inertia comes from the wheel's mass distribution. Doubling the radius would double the torque.

Part 3 done

4

Part 4 of 5: Opposing torques reduce the angular acceleration

Real axles have friction. A friction torque opposes the motion and subtracts from the applied torque. Only the net torque appears in the law. A constant net torque gives a constant α\alphaα, so the rotational motion equation ω=ω0+αt\omega = \omega_0 + \alpha tω=ω0​+αt applies.

If friction were larger than the applied torque, the net torque would reverse. A spinning wheel would then slow down.

Worked example

Friction at the axle

The same wheel (I=0.40 kg m2I = 0.40\ \mathrm{kg\,m^2}I=0.40 kgm2) receives an applied torque of 6.0 N m. Friction exerts 1.0 N m against it. The wheel starts from rest. Find α\alphaα and the angular speed after 2.0 s.
  1. 1
    Net torque: 6.0−1.0=5.0 N m6.0 - 1.0 = 5.0\ \mathrm{N\,m}6.0−1.0=5.0 Nm.
  2. 2
    Angular acceleration: α=5.00.40=12.5 rad/s2\alpha = \frac{5.0}{0.40} = 12.5\ \mathrm{rad/s^2}α=0.405.0​=12.5 rad/s2.
  3. 3
    Angular speed: ω=0+(12.5)(2.0)=25 rad/s\omega = 0 + (12.5)(2.0) = 25\ \mathrm{rad/s}ω=0+(12.5)(2.0)=25 rad/s.

Answer: The angular acceleration is 12.5 rad/s212.5\ \mathrm{rad/s^2}12.5 rad/s2, and the angular speed after 2.0 s is 25 rad/s25\ \mathrm{rad/s}25 rad/s.

Part 4 done

Quick check

One question on the part you just read

Easy

Identify the equation that expresses Newton's second law for rotation.
Show answer and explanation

Answer: A · Worked explanation

The law states that net torque equals rotational inertia times angular acceleration. Using ω\omegaω instead of α\alphaα confuses the spin rate with its rate of change. A force cannot be set equal to IαI\alphaIα because the units do not match. Putting III in the denominator reverses the dependence.
5

Part 5 of 5: The sign of angular acceleration follows the net torque

Angular acceleration points the way the net torque would turn the object. Choose a positive direction and keep it for every torque and for α\alphaα. Then compare the direction of the net torque with the current spin.

  • Net torque in the direction of the spin: the object speeds up.
  • Net torque against the spin: the object slows down.
  • Zero net torque: the angular velocity stays constant.

Exam tip

Describe direction in words, such as "the net torque is clockwise, so the angular acceleration is clockwise". Then say whether the object speeds up or slows down.

Note read

Check your recall[12 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[3 marks]

    State Newton's second law for rotation as an equation and name each symbol.

    Show mark schemeHide mark scheme

    Model answer

    ∑τ=Iα\sum \tau = I\alpha∑τ=Iα, where ∑τ\sum \tau∑τ is the net torque, III is the rotational inertia and α\alphaα is the angular acceleration.

    • 1 mark for writing ∑τ=Iα\sum \tau = I\alpha∑τ=Iα
    • 1 mark for naming ∑τ\sum \tau∑τ as net torque and III as rotational inertia
    • 1 mark for naming α\alphaα as angular acceleration
  2. 2.Explain[2 marks]

    Explain why two wheels that receive the same net torque can have different angular accelerations.

    Show mark schemeHide mark scheme

    Model answer

    Since α=∑τ/I\alpha = \sum \tau / Iα=∑τ/I, the wheel with the larger rotational inertia has the smaller angular acceleration for the same torque.

    • 1 mark for stating α=∑τ/I\alpha = \sum \tau / Iα=∑τ/I (inverse proportionality to III)
    • 1 mark for concluding that different rotational inertias give different accelerations
  3. 3.Calculate[2 marks]

    Calculate the angular acceleration of a disk with a rotational inertia of 0.50 kg m20.50\ \mathrm{kg\,m^2}0.50 kgm2 when the net torque is 12 N m12\ \mathrm{N\,m}12 Nm.

    Show mark schemeHide mark scheme

    Model answer

    α=∑τ/I=12/0.50=24 rad/s2\alpha = \sum \tau / I = 12 / 0.50 = 24\ \mathrm{rad/s^2}α=∑τ/I=12/0.50=24 rad/s2.

    • 1 mark for dividing net torque by rotational inertia
    • 1 mark for obtaining 24 rad/s224\ \mathrm{rad/s^2}24 rad/s2
  4. 4.Calculate[3 marks]

    Calculate the angular acceleration of a pulley of radius 0.20 m and rotational inertia 0.50 kg m20.50\ \mathrm{kg\,m^2}0.50 kgm2. A 15 N force acts along the tangent to its rim, and friction exerts a 1.0 N m1.0\ \mathrm{N\,m}1.0 Nm opposing torque.

    Show mark schemeHide mark scheme

    Model answer

    The applied torque is (0.20)(15)=3.0 N m(0.20)(15) = 3.0\ \mathrm{N\,m}(0.20)(15)=3.0 Nm. The net torque is 3.0−1.0=2.0 N m3.0 - 1.0 = 2.0\ \mathrm{N\,m}3.0−1.0=2.0 Nm. Then α=2.0/0.50=4.0 rad/s2\alpha = 2.0 / 0.50 = 4.0\ \mathrm{rad/s^2}α=2.0/0.50=4.0 rad/s2.

    • 1 mark for finding the applied torque 3.0 N m3.0\ \mathrm{N\,m}3.0 Nm
    • 1 mark for subtracting friction to get 2.0 N m2.0\ \mathrm{N\,m}2.0 Nm
    • 1 mark for dividing by III to get 4.0 rad/s24.0\ \mathrm{rad/s^2}4.0 rad/s2
  5. 5.Predict[2 marks]

    Predict how the angular acceleration changes when the net torque doubles and the rotational inertia triples.

    Show mark schemeHide mark scheme

    Model answer

    Since α=∑τ/I\alpha = \sum \tau / Iα=∑τ/I, the angular acceleration is multiplied by 23\frac{2}{3}32​. It decreases to two thirds of its original value.

    • 1 mark for using α=∑τ/I\alpha = \sum \tau / Iα=∑τ/I
    • 1 mark for stating that α\alphaα becomes 23\frac{2}{3}32​ of the original

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Predict[1 mark]

The rotational inertia of a wheel doubles while the net torque stays the same. Predict what happens to its angular acceleration.
Show answer and explanation

Answer: D · Worked explanation

Because α=∑τ/I\alpha = \sum \tau / Iα=∑τ/I, doubling III at constant torque halves α\alphaα. Greater rotational inertia makes the wheel harder to accelerate. The option claiming it doubles reverses the relationship. The option of four times as large treats the dependence as a square.
4.

Medium·Calculate[2 marks]

Calculate the angular acceleration of an object with I=2.0 kg m2I = 2.0\ \mathrm{kg\,m^2}I=2.0 kgm2 when the net torque is 8.0 N m8.0\ \mathrm{N\,m}8.0 Nm.
Show answer and explanation

Answer: C · Worked explanation

Use α=∑τ/I=8.0/2.0=4.0 rad/s2\alpha = \sum \tau / I = 8.0 / 2.0 = 4.0\ \mathrm{rad/s^2}α=∑τ/I=8.0/2.0=4.0 rad/s2. Multiplying the torque and the rotational inertia gives 16, which treats the law as a product of the two. Dividing in the wrong order gives 0.25, which has the wrong unit as well. Always put the net torque on top.
5.

Medium·Calculate[2 marks]

Calculate the net torque needed to give a disk with I=0.50 kg m2I = 0.50\ \mathrm{kg\,m^2}I=0.50 kgm2 an angular acceleration of 6.0 rad/s26.0\ \mathrm{rad/s^2}6.0 rad/s2.
Show answer and explanation

Answer: A · Worked explanation

Rearrange the law: ∑τ=Iα=(0.50)(6.0)=3.0 N m\sum \tau = I\alpha = (0.50)(6.0) = 3.0\ \mathrm{N\,m}∑τ=Iα=(0.50)(6.0)=3.0 Nm. Dividing 6.0 by 0.50 gives 12, which solves for the wrong quantity. Dividing 0.50 by 6.0 gives 0.083. Adding the two numbers has no basis in the law.
6.

Medium·Calculate[2 marks]

A 10 N force acts along the tangent of a wheel's rim, 0.40 m from its axle. The wheel's rotational inertia is 0.80 kg m20.80\ \mathrm{kg\,m^2}0.80 kgm2 and friction is negligible. Calculate its angular acceleration.
Show answer and explanation

Answer: D · Worked explanation

The torque is rF=(0.40)(10)=4.0 N mrF = (0.40)(10) = 4.0\ \mathrm{N\,m}rF=(0.40)(10)=4.0 Nm, so α=4.0/0.80=5.0 rad/s2\alpha = 4.0 / 0.80 = 5.0\ \mathrm{rad/s^2}α=4.0/0.80=5.0 rad/s2. Dividing the force directly by III gives 12.5, which skips the step of converting force to torque. Multiplying the radius, force and rotational inertia together gives 3.2, which is not physically meaningful.
7.

Medium·Calculate[2 marks]

A wheel with I=1.5 kg m2I = 1.5\ \mathrm{kg\,m^2}I=1.5 kgm2 has an applied torque of 9.0 N m9.0\ \mathrm{N\,m}9.0 Nm. Friction exerts an opposing torque of 3.0 N m3.0\ \mathrm{N\,m}3.0 Nm. Calculate its angular acceleration.
Show answer and explanation

Answer: B · Worked explanation

The net torque is 9.0−3.0=6.0 N m9.0 - 3.0 = 6.0\ \mathrm{N\,m}9.0−3.0=6.0 Nm, so α=6.0/1.5=4.0 rad/s2\alpha = 6.0 / 1.5 = 4.0\ \mathrm{rad/s^2}α=6.0/1.5=4.0 rad/s2. Ignoring friction gives 6.0. Adding the friction torque to the applied torque gives 8.0, which treats friction as helping the motion instead of opposing it.
8.

Hard·Calculate[2 marks]

A disk with I=0.50 kg m2I = 0.50\ \mathrm{kg\,m^2}I=0.50 kgm2 starts from rest. A constant net torque of 2.0 N m2.0\ \mathrm{N\,m}2.0 Nm acts for 3.0 s. Calculate its angular speed at the end.
Show answer and explanation

Answer: A · Worked explanation

First, α=2.0/0.50=4.0 rad/s2\alpha = 2.0 / 0.50 = 4.0\ \mathrm{rad/s^2}α=2.0/0.50=4.0 rad/s2. Then ω=αt=(4.0)(3.0)=12 rad/s\omega = \alpha t = (4.0)(3.0) = 12\ \mathrm{rad/s}ω=αt=(4.0)(3.0)=12 rad/s. Multiplying the torque by the time gives 6.0, which skips the division by III. The value 18 would be an angle turned through, 12αt2\frac{1}{2}\alpha t^221​αt2, not an angular speed.
9.

Hard·Predict[2 marks]

A wheel spins counterclockwise at 20 rad/s. A constant net torque acts clockwise. Predict what happens to the wheel's angular speed at first.
Show answer and explanation

Answer: A · Worked explanation

The angular acceleration points in the direction of the net torque, clockwise here, which is opposite to the spin. So the wheel slows down. It does not reverse instantly, since angular velocity changes gradually at the rate α\alphaα. A torque changes the spin whether or not the wheel is already turning.
10.

Hard·Predict[2 marks]

A tangent force FFF acts on a wheel at a distance RRR from its axle, giving angular acceleration α\alphaα. The same tangent force now acts at a distance 2R2R2R from the axle on the same wheel. Predict the new angular acceleration.
Show answer and explanation

Answer: A · Worked explanation

The torque is rFrFrF, so doubling rrr doubles the torque. The rotational inertia of the wheel does not change. Then α=∑τ/I\alpha = \sum \tau / Iα=∑τ/I doubles, giving 2α2\alpha2α. The option of 4α4\alpha4α wrongly squares the radius, a habit from the rotational inertia formula. That formula does not apply here.

Keep going

Next topic6.1 Rotational kinetic energyPrevious topic5.5 Rotational equilibrium

More in Unit 5 · Torque and Rotational Dynamics

  1. 5.1Rotational kinematicsNotes · 10 questions
  2. 5.2Linear and rotational motionNotes · 10 questions
  3. 5.3TorqueNotes · 10 questions
  4. 5.4Rotational inertiaNotes · 10 questions
  5. 5.5Rotational equilibriumNotes · 10 questions
  6. 5.6Newton's second law for rotationNotes · 10 questions

All AP Physics 1 topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/5 read

  1. 1A net torque changes spin the way a net force changes motion
  2. 2Net torque equals rotational inertia times angular acceleration
  3. 3Angular acceleration comes from net torque divided by rotational inertia
  4. 4Opposing torques reduce the angular acceleration
  5. 5The sign of angular acceleration follows the net torque
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe

Angular acceleration and rotational inertia

Angular acceleration (rad/s²)00.511.52051015202530Rotational inertia (kg m²)
  • Net torque 6.0 N m
  • 0.40, 15