Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Physics 2
  3. ›14 Waves, Sound and Physical Optics
  4. ›14.2 Periodic waves

AP Physics 2 · Unit 14 · Waves, Sound and Physical Optics

14.2 Periodic waves

Define wavelength, frequency, amplitude, and period for a periodic wave, use the wave speed equation to find unknowns, and read basic wave diagrams.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5A steady source produces a periodic wave
  1. 1A steady source produces a periodic wave
  2. 2Period and frequency describe how often the wave repeats
  3. 3Amplitude measures the largest displacement from equilibrium
  4. 4Wave speed equals frequency times wavelength
  5. 5Wave diagrams show shape in space or motion in time
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: A steady source produces a periodic wave

Imagine a swimmer bobbing at a steady pace in a still pool. Ripples spread out in a regular pattern. A periodic wave is a wave whose disturbance repeats at regular intervals.

Look at one snapshot of such a wave. The shape repeats along the direction of travel. The length of one repeat is the wavelength, λ\lambdaλ, which you can measure from one crest to the next.

Wavelength is a distance, so it is measured in meters. Any two matching points work, such as two adjacent troughs.

Key terms · tap one for its definition

periodic wave

A periodic wave is a wave in which each point of the medium repeats the same motion at regular time intervals.

wavelength

The wavelength is the distance λ\lambdaλ between two successive matching points on a periodic wave, measured in meters.

Part 1 done

2

Part 2 of 5: Period and frequency describe how often the wave repeats

Now watch one point on the rope instead of the whole shape. It moves up and down again and again. The time for one full cycle is the period, TTT, measured in seconds. Here, one complete revolution means one full cycle of the motion.

The number of cycles each second is the frequency, fff. Its unit is the hertz, Hz\mathrm{Hz}Hz, which equals one cycle per second. Frequency and period are inverses: f=1Tf=\frac{1}{T}f=T1​.

A period of 0.020 s0.020\,\mathrm{s}0.020s gives f=10.020 s=50 Hzf=\frac{1}{0.020\,\mathrm{s}}=50\,\mathrm{Hz}f=0.020s1​=50Hz. A short period means rapid vibration and a high frequency.

Exam tip

Check units to tell the two apart. Period is in seconds, and frequency is in hertz.

Key terms · tap one for its definition

period

The period is the time for one complete cycle of oscillation, measured in seconds.

frequency

The frequency is the number of complete cycles per unit time; it equals 1T\frac{1}{T}T1​.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the wavelength of a periodic wave.
Show answer and explanation

Answer: B · Worked explanation

The wavelength is the length of one repeat of the wave, measured between matching points such as adjacent crests. The time for one cycle is the period. The maximum displacement is the amplitude, and the number of cycles each second is the frequency.
3

Part 3 of 5: Amplitude measures the largest displacement from equilibrium

Return to the snapshot of the wave. Some waves rise higher above the rest position than others. The amplitude, AAA, measures this height.

Amplitude is the maximum displacement from the equilibrium position, measured in meters. You measure it from the rest line to a crest or to a trough. An amplitude of 0.20 m means the medium rises 0.20 m above the rest line and falls as far below.

Common mistake

Do not measure amplitude from trough to crest. That distance is twice the amplitude.

A larger amplitude means the wave carries more energy. It does not change the wave speed.

Key term

amplitude

The amplitude is the maximum magnitude of the displacement from equilibrium, measured in meters.

Part 3 done

4

Part 4 of 5: Wave speed equals frequency times wavelength

Now combine the three quantities. In one period, a wave moves forward by exactly one wavelength. Speed is distance divided by time, so v=λTv=\frac{\lambda}{T}v=Tλ​.

Since f=1Tf=\frac{1}{T}f=T1​, this becomes v=fλv=f\lambdav=fλ. This is the wave speed equation, where vvv is the wave speed in m/s\mathrm{m/s}m/s. Units confirm it: hertz times meters gives meters per second. The equation holds for any periodic wave.

Worked example

Finding a wavelength

A wave on a rope has frequency 2.5 Hz2.5\,\mathrm{Hz}2.5Hz and travels at 4.0 m/s4.0\,\mathrm{m/s}4.0m/s. Find its wavelength.
  1. 1
    Wave speed equals frequency times wavelength: v=fλv=f\lambdav=fλ.
  2. 2
    Rearrange for wavelength: λ=vf\lambda=\frac{v}{f}λ=fv​.
  3. 3
    Substitute: λ=4.0 m/s2.5 Hz=1.6 m\lambda=\frac{4.0\,\mathrm{m/s}}{2.5\,\mathrm{Hz}}=1.6\,\mathrm{m}λ=2.5Hz4.0m/s​=1.6m.

Answer: The wavelength is 1.6 m1.6\,\mathrm{m}1.6m.

The medium sets the speed. If the frequency of a source changes, the wavelength changes so that the product fλf\lambdafλ stays the same.

Key term

wave speed equation

The wave speed equation is v=fλv=f\lambdav=fλ, relating wave speed vvv in m/s to frequency fff in Hz and wavelength λ\lambdaλ in meters.

Part 4 done

Quick check

One question on the part you just read

Easy

A wave has period TTT. Identify the expression for its frequency.
Show answer and explanation

Answer: B · Worked explanation

Frequency is the number of cycles per unit time, and the period is the time for one cycle. They are inverses, so f=1Tf=\frac{1}{T}f=T1​. Setting fff equal to TTT confuses a rate with a time, and the other expressions have no basis in the definitions.
5

Part 5 of 5: Wave diagrams show shape in space or motion in time

A wave graph can mean two different things, so check the horizontal axis first. A graph of displacement against position is a snapshot of the whole wave. You can read the wavelength and amplitude from it. Use the dashed equilibrium line as the zero level.

Figure 1. The wavelength is the distance between adjacent crests, and A marks the amplitude measured from the equilibrium line.

A graph of displacement against time follows one point as it oscillates. You can read the period and amplitude from it. On this graph, the period is the horizontal distance between two successive crests. Frequency then follows from f=1Tf=\frac{1}{T}f=T1​.

Reading two kinds of wave graph

GraphHorizontal axisRead directly
Displacement against positionPosition (m)Wavelength, amplitude
Displacement against timeTime (s)Period, amplitude
Graph
Displacement against position
Horizontal axis
Position (m)
Read directly
Wavelength, amplitude
Graph
Displacement against time
Horizontal axis
Time (s)
Read directly
Period, amplitude

Note read

Check your recall[12 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Describe[2 marks]

    Describe how to find the wavelength and the amplitude from a graph of displacement against position.

    Show mark schemeHide mark scheme

    Model answer

    Measure the distance between two adjacent crests to find the wavelength. Measure the maximum displacement from the equilibrium line to a crest to find the amplitude.

    • 1 mark for stating that wavelength is the distance between matching points such as adjacent crests
    • 1 mark for stating that amplitude is the maximum displacement from equilibrium
  2. 2.Calculate[2 marks]

    Calculate the frequency of a wave source whose period is 0.050 s0.050\,\mathrm{s}0.050s.

    Show mark schemeHide mark scheme

    Model answer

    f=1T=10.050 s=20 Hzf=\frac{1}{T}=\frac{1}{0.050\,\mathrm{s}}=20\,\mathrm{Hz}f=T1​=0.050s1​=20Hz.

    • 1 mark for using f=1Tf=\frac{1}{T}f=T1​ with the correct substitution
    • 1 mark for obtaining 20 Hz20\,\mathrm{Hz}20Hz
  3. 3.Determine[3 marks]

    Determine the speed of a wave that has period 0.040 s0.040\,\mathrm{s}0.040s and wavelength 0.30 m0.30\,\mathrm{m}0.30m.

    Show mark schemeHide mark scheme

    Model answer

    f=10.040 s=25 Hzf=\frac{1}{0.040\,\mathrm{s}}=25\,\mathrm{Hz}f=0.040s1​=25Hz. Then v=fλ=(25 Hz)(0.30 m)=7.5 m/sv=f\lambda=(25\,\mathrm{Hz})(0.30\,\mathrm{m})=7.5\,\mathrm{m/s}v=fλ=(25Hz)(0.30m)=7.5m/s.

    • 1 mark for calculating f=25 Hzf=25\,\mathrm{Hz}f=25Hz
    • 1 mark for using v=fλv=f\lambdav=fλ
    • 1 mark for obtaining 7.5 m/s7.5\,\mathrm{m/s}7.5m/s
  4. 4.Predict[3 marks]

    Predict how the wave speed and the wavelength change when the source frequency doubles in the same medium.

    Show mark schemeHide mark scheme

    Model answer

    The wave speed stays the same because the medium sets it. Since v=fλv=f\lambdav=fλ, doubling fff halves the wavelength.

    • 1 mark for stating that the wave speed does not change
    • 1 mark for linking the unchanged speed to the medium
    • 1 mark for stating that the wavelength halves
  5. 5.Explain[2 marks]

    Explain why the wave speed equals fλf\lambdafλ.

    Show mark schemeHide mark scheme

    Model answer

    In one period a wave moves forward one wavelength, so v=λTv=\frac{\lambda}{T}v=Tλ​. Because f=1Tf=\frac{1}{T}f=T1​, this gives v=fλv=f\lambdav=fλ.

    • 1 mark for stating that the wave moves one wavelength in one period
    • 1 mark for substituting f=1Tf=\frac{1}{T}f=T1​ to obtain v=fλv=f\lambdav=fλ

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

Identify the quantity that the amplitude of a wave describes.
Show answer and explanation

Answer: C · Worked explanation

Amplitude is the maximum magnitude of the displacement from equilibrium. The distance between adjacent crests is the wavelength. Speed depends on the medium, and the time for one cycle is the period. Unlike the others, amplitude is measured from the rest position, not between two crests or over a time.
4.

Medium·Calculate[2 marks]

A wave has frequency 2.5 Hz2.5\,\mathrm{Hz}2.5Hz and wavelength 0.60 m0.60\,\mathrm{m}0.60m. Calculate its speed.
Show answer and explanation

Answer: B · Worked explanation

v=fλ=(2.5 Hz)(0.60 m)=1.5 m/sv=f\lambda=(2.5\,\mathrm{Hz})(0.60\,\mathrm{m})=1.5\,\mathrm{m/s}v=fλ=(2.5Hz)(0.60m)=1.5m/s. The value 4.2 m/s4.2\,\mathrm{m/s}4.2m/s divides frequency by wavelength. The value 0.24 m/s0.24\,\mathrm{m/s}0.24m/s divides wavelength by frequency, and 3.1 m/s3.1\,\mathrm{m/s}3.1m/s adds the two numbers. Check the units: hertz times meters gives meters per second, which is the unit of speed.
5.

Medium·Calculate[1 mark]

A source vibrates with a period of 0.20 s0.20\,\mathrm{s}0.20s. Calculate its frequency.
Show answer and explanation

Answer: C · Worked explanation

f=1T=10.20 s=5.0 Hzf=\frac{1}{T}=\frac{1}{0.20\,\mathrm{s}}=5.0\,\mathrm{Hz}f=T1​=0.20s1​=5.0Hz. The value 0.20 Hz0.20\,\mathrm{Hz}0.20Hz simply repeats the number given for the period, which confuses a time with a rate. Frequency counts cycles each second, so a shorter period gives a larger frequency. Check: five cycles each second means each cycle lasts one-fifth of a second, or 0.20 s0.20\,\mathrm{s}0.20s.
6.

Medium·Calculate[2 marks]

A wave travels at 12 m/s12\,\mathrm{m/s}12m/s with frequency 4.0 Hz4.0\,\mathrm{Hz}4.0Hz. Calculate its wavelength.
Show answer and explanation

Answer: D · Worked explanation

λ=vf=12 m/s4.0 Hz=3.0 m\lambda=\frac{v}{f}=\frac{12\,\mathrm{m/s}}{4.0\,\mathrm{Hz}}=3.0\,\mathrm{m}λ=fv​=4.0Hz12m/s​=3.0m. The value 48 m48\,\mathrm{m}48m multiplies speed by frequency instead of dividing. The value 0.33 m0.33\,\mathrm{m}0.33m inverts the ratio, and 8.0 m8.0\,\mathrm{m}8.0m subtracts the numbers. Check the units: meters per second divided by hertz leaves meters, the unit of wavelength.
7.

Medium·Determine[2 marks]

On a wave diagram, the vertical distance from a crest to the next trough is 0.30 m0.30\,\mathrm{m}0.30m. Determine the amplitude.
Show answer and explanation

Answer: D · Worked explanation

The crest and trough lie the same distance above and below the equilibrium line, so the amplitude is half the crest-to-trough distance: 0.30 m2=0.15 m\frac{0.30\,\mathrm{m}}{2}=0.15\,\mathrm{m}20.30m​=0.15m. The value 0.30 m0.30\,\mathrm{m}0.30m measures the full span, which is twice the amplitude. The amplitude is therefore the same whether you measure up from the equilibrium line or down from it.
8.

Hard·Predict[2 marks]

The frequency of a source is tripled in the same medium. Predict the effect on the wavelength.
Show answer and explanation

Answer: B · Worked explanation

The medium sets the wave speed, so vvv is unchanged. Since λ=vf\lambda=\frac{v}{f}λ=fv​, tripling fff makes the wavelength one-third as large. The wavelength does not triple, because it varies inversely with frequency and not directly. For example, with v=12 m/sv=12\,\mathrm{m/s}v=12m/s, a frequency of 4.0 Hz4.0\,\mathrm{Hz}4.0Hz gives 3.0 m3.0\,\mathrm{m}3.0m, and 12 Hz12\,\mathrm{Hz}12Hz gives 1.0 m1.0\,\mathrm{m}1.0m.
9.

Hard·Determine[2 marks]

A wave moves 6.0 m6.0\,\mathrm{m}6.0m in 2.0 s2.0\,\mathrm{s}2.0s, and four crests pass a fixed point each second. Determine the wavelength.
Show answer and explanation

Answer: D · Worked explanation

The speed is 6.0 m2.0 s=3.0 m/s\frac{6.0\,\mathrm{m}}{2.0\,\mathrm{s}}=3.0\,\mathrm{m/s}2.0s6.0m​=3.0m/s, and four crests each second means f=4.0 Hzf=4.0\,\mathrm{Hz}f=4.0Hz. Then λ=3.0 m/s4.0 Hz=0.75 m\lambda=\frac{3.0\,\mathrm{m/s}}{4.0\,\mathrm{Hz}}=0.75\,\mathrm{m}λ=4.0Hz3.0m/s​=0.75m. The value 1.5 m1.5\,\mathrm{m}1.5m divides the distance by the frequency and ignores the time. Check the units: meters per second divided by hertz leaves meters, as a wavelength should.
10.

Hard·Determine[2 marks]

A graph of displacement against time at one point shows 3.0 complete cycles in 1.5 s1.5\,\mathrm{s}1.5s. Determine the period.
Show answer and explanation

Answer: D · Worked explanation

The period is the time for one cycle: T=1.5 s3.0=0.50 sT=\frac{1.5\,\mathrm{s}}{3.0}=0.50\,\mathrm{s}T=3.01.5s​=0.50s. The value 2.0 is the frequency in hertz, and the period is not that number of seconds. The value 4.5 s4.5\,\mathrm{s}4.5s multiplies the two numbers instead of dividing. Always divide the elapsed time by the number of complete cycles to get the time for one cycle.

Keep going

Next topic14.3 Boundary behavior and polarizationPrevious topic14.1 Wave pulses and waves

More in Unit 14 · Waves, Sound and Physical Optics

  1. 14.1Wave pulses and wavesNotes · 10 questions
  2. 14.2Periodic wavesNotes · 10 questions
  3. 14.3Boundary behavior and polarizationNotes · 10 questions
  4. 14.4Electromagnetic wavesNotes · 10 questions
  5. 14.5The Doppler effectNotes · 10 questions
  6. 14.6Interference and standing wavesNotes · 10 questions
  7. 14.7DiffractionNotes · 10 questions
  8. 14.8Double slits and diffraction gratingsNotes · 10 questions
  9. 14.9Thin-film interferenceNotes · 10 questions

All AP Physics 2 topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/5 read

  1. 1A steady source produces a periodic wave
  2. 2Period and frequency describe how often the wave repeats
  3. 3Amplitude measures the largest displacement from equilibrium
  4. 4Wave speed equals frequency times wavelength
  5. 5Wave diagrams show shape in space or motion in time
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe