Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Physics 2
  3. ›14 Waves, Sound and Physical Optics
  4. ›14.3 Boundary behavior and polarization

AP Physics 2 · Unit 14 · Waves, Sound and Physical Optics

14.3 Boundary behavior and polarization

Predict how waves reflect and transmit at a boundary, contrast fixed-end and free-end reflection, and describe how polarization affects transverse waves.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5A boundary splits a wave into reflected and transmitted parts
  1. 1A boundary splits a wave into reflected and transmitted parts
  2. 2A fixed end inverts the reflected pulse
  3. 3The second medium decides how a pulse reflects
  4. 4Polarization restricts a transverse wave to one plane
  5. 5Crossed polarizers block light and show that light is transverse
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: A boundary splits a wave into reflected and transmitted parts

Shout toward a distant cliff and you hear an echo. Some of the sound returns, and some continues on or is absorbed. A wave meeting a boundary between two media usually divides in a similar way.

The wave arriving at the boundary is the incident wave. The part that returns is the reflected wave. The part that continues into the second medium is the transmitted wave. Together they carry the incident energy, apart from small losses.

The source sets the frequency, so it does not change at the boundary. The speed does change, because it depends on the medium. Since v=fλv=f\lambdav=fλ, where λ\lambdaλ is the wavelength, the wavelength changes too.

Key terms · tap one for its definition

boundary

A boundary is the surface where one medium ends and another begins, across which a wave’s speed can change.

reflected wave

A reflected wave is the part of an incident wave that returns into the first medium at a boundary.

transmitted wave

A transmitted wave is the part of an incident wave that continues into the second medium at a boundary.

Part 1 done

2

Part 2 of 5: A fixed end inverts the reflected pulse

Now picture a rope tied to a wall. A pulse reaches the wall and tries to lift it. The wall pulls back on the rope with an equal and opposite force.

That force sends back a pulse displaced the opposite way. At a fixed end, the reflected pulse is inverted. Its shape and speed stay the same.

Suppose the rope end instead slides freely on a smooth pole. This is a free end. Nothing pulls back on the rope, so the reflected pulse is upright.

Figure 1. A fixed end returns the pulse inverted, and a free end returns it upright. The arrows show the direction of travel.

Exam tip

State both the end type and the orientation of the reflected pulse. The words inverted and upright earn the marks.

Key terms · tap one for its definition

fixed end

A fixed end is a boundary that cannot move, such as a rope tied to a wall, and it inverts a reflected pulse.

free end

A free end is a boundary that can move freely, such as a rope ring sliding on a pole, and it reflects a pulse upright.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the orientation of a pulse reflected from a fixed end.
Show answer and explanation

Answer: A · Worked explanation

A fixed end pulls back on the rope with a force opposite to the pulse displacement, so the reflected pulse is inverted. An upright reflection occurs at a free end. A fixed end does not absorb the pulse, and it cannot transmit it either.
3

Part 3 of 5: The second medium decides how a pulse reflects

Real boundaries lie between the fixed and free extremes. Consider a thin rope joined to a thick rope. Waves travel more slowly in the thick rope.

A pulse moving from the thin rope into the thick one meets what acts like a fixed end. The reflected pulse is inverted. The transmitted pulse is upright.

A pulse moving from the thick rope into the thin one meets what acts more like a free end. The reflected pulse is upright, and so is the transmitted pulse.

Reflection and transmission of a pulse

BoundaryReflected pulseTransmitted pulse
Into a slower mediumInvertedUpright
Into a faster mediumUprightUpright
Boundary
Into a slower medium
Reflected pulse
Inverted
Transmitted pulse
Upright
Boundary
Into a faster medium
Reflected pulse
Upright
Transmitted pulse
Upright

Common mistake

A transmitted pulse is not inverted. A reflected pulse flips only at a fixed end or when the second medium is slower.

Part 3 done

4

Part 4 of 5: Polarization restricts a transverse wave to one plane

Return to the rope and shake it only up and down. The motion stays in one vertical plane. A polarized wave is a transverse wave whose oscillations all lie in a single direction.

Shake the rope in random directions and the wave is unpolarized. Light is a transverse wave. Light from the sun or a bulb is usually unpolarized, because its oscillation direction varies.

A polarizer is a filter that passes only the oscillation component along its transmission axis. Light leaving it is polarized along that axis. It is also dimmer than the light that entered.

Key terms · tap one for its definition

polarized wave

A polarized wave is a transverse wave whose oscillations all lie along one direction perpendicular to the direction of travel.

polarizer

A polarizer is a filter that transmits only the component of a wave’s oscillation that lies along its transmission axis.

Part 4 done

Quick check

One question on the part you just read

Easy

Identify the orientation of a pulse reflected from a free end.
Show answer and explanation

Answer: B · Worked explanation

At a free end nothing pulls back on the rope, so the pulse returns with the same orientation. The reflected pulse is upright. Inversion belongs to a fixed end, where the support exerts a force opposite to the pulse displacement.
5

Part 5 of 5: Crossed polarizers block light and show that light is transverse

Place a second polarizer after the first. If its axis is parallel to the first, the light passes through. If the axes are perpendicular, the polarizers are crossed, and almost no light gets through.

Polarizing sunglasses use this idea. Glare from a flat surface is partly polarized, so a polarizer can block much of it.

Only transverse waves can be polarized. Sound is longitudinal, so its oscillation already lies along the travel direction. No filter can select a plane for it.

Go deeperWhat a third polarizer does

Place a polarizer with its axis at 45∘45^{\circ}45∘ between two crossed polarizers. Light now emerges from the last one.

The middle polarizer passes light polarized at 45∘45^{\circ}45∘. That light has a component along the axis of the last polarizer, so some of it passes. For polarized light of intensity I0I_0I0​, the transmitted intensity is I=I0cos⁡2θI=I_0\cos^2\thetaI=I0​cos2θ, where θ\thetaθ is the angle between the polarization and the axis.

Note read

Check your recall[12 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Predict[2 marks]

    Predict the orientation of the reflected and transmitted pulses when a pulse travels from a thin rope into a thick rope in which waves move more slowly.

    Show mark schemeHide mark scheme

    Model answer

    The reflected pulse is inverted, and the transmitted pulse is upright.

    • 1 mark for stating that the reflected pulse is inverted
    • 1 mark for stating that the transmitted pulse is upright
  2. 2.Describe[2 marks]

    Describe the difference between reflection at a fixed end and at a free end.

    Show mark schemeHide mark scheme

    Model answer

    At a fixed end the reflected pulse is inverted. At a free end the reflected pulse is upright.

    • 1 mark for stating that a fixed end gives an inverted reflected pulse
    • 1 mark for stating that a free end gives an upright reflected pulse
  3. 3.Explain[3 marks]

    Explain why the wavelength of a wave changes when it passes from one rope into another while the frequency stays constant.

    Show mark schemeHide mark scheme

    Model answer

    The source sets the frequency, so it stays the same. The speed changes because it depends on the medium. Since v=fλv=f\lambdav=fλ, a different speed at the same frequency gives a different wavelength.

    • 1 mark for stating that the frequency is set by the source
    • 1 mark for stating that the wave speed changes in the new medium
    • 1 mark for using v=fλv=f\lambdav=fλ to conclude that the wavelength changes
  4. 4.Determine[3 marks]

    Determine the wavelength in each rope for a wave of frequency 20 Hz20\,\mathrm{Hz}20Hz that travels at 8.0 m/s8.0\,\mathrm{m/s}8.0m/s in the first rope and 4.0 m/s4.0\,\mathrm{m/s}4.0m/s in the second.

    Show mark schemeHide mark scheme

    Model answer

    Using λ=vf\lambda=\frac{v}{f}λ=fv​ gives 8.0 m/s20 Hz=0.40 m\frac{8.0\,\mathrm{m/s}}{20\,\mathrm{Hz}}=0.40\,\mathrm{m}20Hz8.0m/s​=0.40m in the first rope and 4.0 m/s20 Hz=0.20 m\frac{4.0\,\mathrm{m/s}}{20\,\mathrm{Hz}}=0.20\,\mathrm{m}20Hz4.0m/s​=0.20m in the second, with the same frequency.

    • 1 mark for using λ=vf\lambda=\frac{v}{f}λ=fv​ with the frequency unchanged
    • 1 mark for obtaining 0.40 m0.40\,\mathrm{m}0.40m for the first rope
    • 1 mark for obtaining 0.20 m0.20\,\mathrm{m}0.20m for the second rope
  5. 5.Explain[2 marks]

    Explain why sound waves in air cannot be polarized.

    Show mark schemeHide mark scheme

    Model answer

    Polarization applies to transverse waves, whose oscillations are perpendicular to the direction of travel. Sound is longitudinal, so its oscillations lie along the travel direction, and no plane can be selected.

    • 1 mark for stating that only transverse waves can be polarized
    • 1 mark for stating that sound is longitudinal, so its oscillation is along the travel direction

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

Identify the kind of waves that can be polarized.
Show answer and explanation

Answer: B · Worked explanation

Polarization selects a direction of oscillation perpendicular to the direction of travel. Only transverse waves have such oscillations. Longitudinal waves oscillate along the travel direction, so there is no plane to select. Sound in air is longitudinal, so it cannot be polarized.
4.

Medium·Predict[1 mark]

A pulse travels along a light rope toward a junction with a heavier rope, in which waves travel more slowly. Predict the reflected and transmitted pulses.
Show answer and explanation

Answer: A · Worked explanation

A boundary into a slower medium acts like a fixed end for the reflected pulse, so it is inverted. The transmitted pulse is not inverted, so it is upright. Both pulses upright is the result for a boundary into a faster medium.
5.

Medium·Determine[2 marks]

A wave of frequency 10 Hz10\,\mathrm{Hz}10Hz travels at 6.0 m/s6.0\,\mathrm{m/s}6.0m/s in one rope and at 3.0 m/s3.0\,\mathrm{m/s}3.0m/s in another. Determine its wavelength in the second rope.
Show answer and explanation

Answer: C · Worked explanation

The frequency stays 10 Hz10\,\mathrm{Hz}10Hz, so λ=vf=3.0 m/s10 Hz=0.30 m\lambda=\frac{v}{f}=\frac{3.0\,\mathrm{m/s}}{10\,\mathrm{Hz}}=0.30\,\mathrm{m}λ=fv​=10Hz3.0m/s​=0.30m. The value 0.60 m0.60\,\mathrm{m}0.60m is the wavelength in the first rope, which does not apply after the speed drops. The speed fell to half its earlier value, so the wavelength also halves, from 0.60 m0.60\,\mathrm{m}0.60m to 0.30 m0.30\,\mathrm{m}0.30m.
6.

Medium·Predict[1 mark]

Vertically polarized light reaches a polarizer whose transmission axis is horizontal. Predict what happens.
Show answer and explanation

Answer: A · Worked explanation

The polarizer passes only the oscillation component along its horizontal axis. Vertical oscillations have no component in that direction, so almost no light is transmitted. The other results would require some horizontal component of the incoming light. This is the crossed arrangement, with the transmission axis perpendicular to the oscillation.
7.

Medium·Explain[1 mark]

A pulse is partly reflected and partly transmitted at a boundary. Identify the correct statement about energy.
Show answer and explanation

Answer: A · Worked explanation

The incident wave energy divides between the two outgoing pulses, so together they carry it, apart from small losses. The transmitted pulse need not carry all the energy because part returns. Energy is not destroyed at a boundary. Real boundaries lose a little energy as heat, which is why the statement includes small losses.
8.

Hard·Determine[2 marks]

A wave of frequency 8.0 Hz8.0\,\mathrm{Hz}8.0Hz moves from rope A, where its speed is 2.0 m/s2.0\,\mathrm{m/s}2.0m/s, into rope B, where its speed is 6.0 m/s6.0\,\mathrm{m/s}6.0m/s. Determine which row is correct.
Show answer and explanation

Answer: A · Worked explanation

The source sets the frequency, so it is 8.0 Hz8.0\,\mathrm{Hz}8.0Hz in both ropes. Then λ=vf\lambda=\frac{v}{f}λ=fv​ gives 0.25 m0.25\,\mathrm{m}0.25m in A and 0.75 m0.75\,\mathrm{m}0.75m in B. The other rows let the frequency change or hold the wavelength fixed, and neither happens at a boundary.
9.

Hard·Predict[2 marks]

Unpolarized light passes through a vertical polarizer and then a horizontal polarizer, so almost none emerges. A third polarizer with its axis at 45∘45^{\circ}45∘ is placed between them. Predict the result.
Show answer and explanation

Answer: B · Worked explanation

The middle polarizer passes light polarized at 45∘45^{\circ}45∘. That light has a component along the horizontal axis of the last polarizer, so some passes. A polarizer only passes a component along its axis, and cannot restore the light already blocked, so not all of it emerges.
10.

Hard·Determine[2 marks]

A wave passes through two crossed polarizers, and its intensity does not change at all. Determine what this shows about the wave.
Show answer and explanation

Answer: B · Worked explanation

Crossed polarizers block transverse waves, because these can be polarized. A wave that passes unchanged cannot be polarized, so it is not transverse. Sound in air is such a wave. Unpolarized light would be almost completely blocked, so that option is false.

Keep going

Next topic14.4 Electromagnetic wavesPrevious topic14.2 Periodic waves

More in Unit 14 · Waves, Sound and Physical Optics

  1. 14.1Wave pulses and wavesNotes · 10 questions
  2. 14.2Periodic wavesNotes · 10 questions
  3. 14.3Boundary behavior and polarizationNotes · 10 questions
  4. 14.4Electromagnetic wavesNotes · 10 questions
  5. 14.5The Doppler effectNotes · 10 questions
  6. 14.6Interference and standing wavesNotes · 10 questions
  7. 14.7DiffractionNotes · 10 questions
  8. 14.8Double slits and diffraction gratingsNotes · 10 questions
  9. 14.9Thin-film interferenceNotes · 10 questions

All AP Physics 2 topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/5 read

  1. 1A boundary splits a wave into reflected and transmitted parts
  2. 2A fixed end inverts the reflected pulse
  3. 3The second medium decides how a pulse reflects
  4. 4Polarization restricts a transverse wave to one plane
  5. 5Crossed polarizers block light and show that light is transverse
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe