Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Physics 2
  3. ›14 Waves, Sound and Physical Optics
  4. ›14.8 Double slits and diffraction gratings

AP Physics 2 · Unit 14 · Waves, Sound and Physical Optics

14.8 Double slits and diffraction gratings

Explain how double slits and diffraction gratings produce bright and dark fringes, and predict how slit spacing and wavelength change the pattern.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Two narrow slits create overlapping waves that interfere
  1. 1Two narrow slits create overlapping waves that interfere
  2. 2The path difference at each point decides bright or dark
  3. 3Bright fringes occur at angles set by one equation
  4. 4Changing wavelength or slit spacing shifts the fringes
  5. 5A diffraction grating produces many sharp bright spots
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Two narrow slits create overlapping waves that interfere

Shine light on a barrier that has two very narrow, closely spaced slits. Each slit spreads the light out in all forward directions. The two spreading waves overlap on a distant screen.

Both slits are lit by the same source, so their waves keep a fixed timing relationship. Each slit therefore acts as a coherent source. Where a crest meets a crest, the waves add and the screen is bright. Where a crest meets a trough, they cancel and the screen is dark.

The result is a series of alternating bright and dark bands, each called a fringe.

Key terms · tap one for its definition

coherent source

A coherent source is a source whose waves keep a fixed timing relationship with another source’s waves, so the interference pattern stays steady.

fringe

A fringe is a bright or dark band on a screen produced by interference of waves.

Part 1 done

2

Part 2 of 5: The path difference at each point decides bright or dark

Now ask why one spot on the screen is bright while its neighbor is dark. Light from one slit may travel farther than light from the other. This extra distance is the path difference.

If the path difference is a whole number of wavelengths, crests arrive together. The waves add, which is constructive interference, and the spot is bright.

If it is an odd number of half wavelengths, a crest meets a trough. The waves cancel, which is destructive interference, and the spot is dark.

Figure 1. Light from two slits spaced by ddd reaches a screen a distance LLL away, where bright fringes form.

On a distant screen, the path difference is dsin⁡θd\sin\thetadsinθ. Here ddd is the slit spacing, the distance between the slit centers. The angle θ\thetaθ is measured from the central line.

Key term

path difference

The path difference is the extra distance one wave travels compared with another wave to reach the same point.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the condition on the path difference that gives a bright fringe in a double-slit pattern.
Show answer and explanation

Answer: C · Worked explanation

Crests from the two slits arrive together when the path difference is a whole number of wavelengths. The waves add, so the spot is bright. An odd number of half wavelengths is the tempting wrong choice. It makes a crest meet a trough, which gives a dark fringe instead.
3

Part 3 of 5: Bright fringes occur at angles set by one equation

The path difference leads straight to a formula. A bright fringe needs dsin⁡θd\sin\thetadsinθ to equal a whole number of wavelengths. This gives dsin⁡θ=mλd\sin\theta=m\lambdadsinθ=mλ, where the whole number mmm is the order of the fringe.

On a distant screen, the angles are small, so sin⁡θ≈tan⁡θ=xL\sin\theta\approx\tan\theta=\frac{x}{L}sinθ≈tanθ=Lx​. Here xxx is the fringe’s distance from the center and LLL is the distance from slits to screen. Combining these gives x≈mλLdx\approx\frac{m\lambda L}{d}x≈dmλL​.

Worked example

Finding a fringe position

Light of wavelength 600 nm passes through two slits 0.30 mm apart. The screen is 2.0 m away. Find the distance from the center to the first bright fringe.
  1. 1
    In words: fringe distance equals order times wavelength times screen distance, divided by slit spacing.
  2. 2
    In symbols: x≈mλLdx\approx\frac{m\lambda L}{d}x≈dmλL​, with m=1m=1m=1.
  3. 3
    Convert units: λ=6.0×10−7 m\lambda=6.0\times10^{-7}\,\mathrm{m}λ=6.0×10−7m and d=3.0×10−4 md=3.0\times10^{-4}\,\mathrm{m}d=3.0×10−4m.
  4. 4
    Substitute: x=(1)(6.0×10−7 m)(2.0 m)3.0×10−4 mx=\frac{(1)(6.0\times10^{-7}\,\mathrm{m})(2.0\,\mathrm{m})}{3.0\times10^{-4}\,\mathrm{m}}x=3.0×10−4m(1)(6.0×10−7m)(2.0m)​.
  5. 5
    Calculate: x=4.0×10−3 mx=4.0\times10^{-3}\,\mathrm{m}x=4.0×10−3m.

Answer: The first bright fringe is 4.0 mm4.0\,\mathrm{mm}4.0mm from the center.

Exam tip

Convert every length to meters before substituting. Slit spacings are often given in millimeters and wavelengths in nanometers. A missed conversion changes the answer by a large factor.

Key term

order

The order of a bright fringe is the whole number mmm that counts fringes outward from the central bright fringe, which has m=0m=0m=0.

Part 3 done

4

Part 4 of 5: Changing wavelength or slit spacing shifts the fringes

Now use the equation to predict what changes. Neighboring bright fringes are separated by about λLd\frac{\lambda L}{d}dλL​. The separation grows with wavelength and screen distance, and it shrinks as slit spacing grows.

  • Longer wavelength: the fringes spread farther apart.
  • Shorter wavelength: the fringes crowd closer together.
  • Smaller slit spacing: the fringes spread farther apart.
  • Larger slit spacing: the fringes crowd closer together.

Common mistake

Moving the slits closer together does not squeeze the pattern. The spacing ddd is in the denominator, so a smaller ddd spreads the fringes out.

Red light has a longer wavelength than blue light, so red fringes sit farther apart. White light gives a white central fringe with colored edges.

Part 4 done

Quick check

One question on the part you just read

Easy

Identify the property that keeps a double-slit interference pattern steady in time.
Show answer and explanation

Answer: A · Worked explanation

A steady pattern needs waves with a fixed timing relationship, which is what coherent means. Two slits lit by one source provide this. Waves of different frequencies would shift their relationship continually, so the bright and dark positions would not stay in place and the pattern would wash out.
5

Part 5 of 5: A diffraction grating produces many sharp bright spots

Suppose you replace two slits with thousands of equally spaced slits. This device is a diffraction grating. Light from every slit interferes with light from all the others.

The bright spots still satisfy dsin⁡θ=mλd\sin\theta=m\lambdadsinθ=mλ, where ddd is the distance between neighboring slits. Many slits make each spot narrow and bright, with wide dark gaps between them.

Grating spacing is usually found from the number of lines per unit length. A grating with 500 lines per millimeter has d=1500 mm=2.0×10−6 md=\frac{1}{500}\,\mathrm{mm}=2.0\times10^{-6}\,\mathrm{m}d=5001​mm=2.0×10−6m. Such a small ddd puts the spots at large angles.

Each wavelength in white light has its own angle. A grating therefore spreads white light into a spectrum of colors.

Go deeperWhy more slits sharpen the spots

At the angle of a bright spot, waves from every slit arrive in step. Move slightly off that angle and waves from slits far apart begin to cancel.

With more slits, this cancellation is more complete. Each bright spot therefore becomes narrower as the number of slits grows.

Key term

diffraction grating

A diffraction grating is a surface with many equally spaced slits that produces sharp bright spots at angles satisfying dsin⁡θ=mλd\sin\theta=m\lambdadsinθ=mλ.

Note read

Check your recall[13 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Explain[3 marks]

    Explain why a double slit produces alternating bright and dark fringes on a screen.

    Show mark schemeHide mark scheme

    Model answer

    Light from the two slits overlaps and interferes on the screen. Where the path difference is a whole number of wavelengths, the waves add and a bright fringe forms. Where it is an odd number of half wavelengths, the waves cancel and a dark fringe forms.

    • 1 mark for stating that waves from the two slits overlap and interfere
    • 1 mark for explaining that a path difference of a whole number of wavelengths gives a bright fringe
    • 1 mark for explaining that a path difference of an odd number of half wavelengths gives a dark fringe
  2. 2.Calculate[3 marks]

    Calculate the distance from the center to the second-order bright fringe for light of wavelength 500 nm, slit spacing 0.20 mm and a screen 1.5 m away.

    Show mark schemeHide mark scheme

    Model answer

    x≈mλLd=(2)(5.0×10−7 m)(1.5 m)2.0×10−4 m=7.5×10−3 m=7.5 mmx\approx\frac{m\lambda L}{d}=\frac{(2)(5.0\times10^{-7}\,\mathrm{m})(1.5\,\mathrm{m})}{2.0\times10^{-4}\,\mathrm{m}}=7.5\times10^{-3}\,\mathrm{m}=7.5\,\mathrm{mm}x≈dmλL​=2.0×10−4m(2)(5.0×10−7m)(1.5m)​=7.5×10−3m=7.5mm.

    • 1 mark for using x≈mλLdx\approx\frac{m\lambda L}{d}x≈dmλL​ with m=2m=2m=2
    • 1 mark for converting wavelength and slit spacing to meters and substituting correctly
    • 1 mark for obtaining 7.5 mm7.5\,\mathrm{mm}7.5mm with a unit
  3. 3.Predict[2 marks]

    Predict how the fringe spacing changes when the slit spacing is halved and nothing else changes. Justify your answer.

    Show mark schemeHide mark scheme

    Model answer

    The fringe spacing doubles. Spacing is proportional to λLd\frac{\lambda L}{d}dλL​, so halving ddd doubles the spacing.

    • 1 mark for predicting that the spacing doubles
    • 1 mark for linking this to spacing being inversely proportional to ddd
  4. 4.Describe[2 marks]

    Describe the pattern produced when monochromatic light passes through a diffraction grating.

    Show mark schemeHide mark scheme

    Model answer

    The pattern is a set of narrow, bright spots separated by wide dark gaps. The spots appear at angles that satisfy dsin⁡θ=mλd\sin\theta=m\lambdadsinθ=mλ.

    • 1 mark for describing narrow, bright spots with wide dark gaps between them
    • 1 mark for stating that the spots occur at angles satisfying dsin⁡θ=mλd\sin\theta=m\lambdadsinθ=mλ
  5. 5.Determine[3 marks]

    Determine the angle of the first-order bright spot for light of wavelength 600 nm on a grating with 400 lines per millimeter.

    Show mark schemeHide mark scheme

    Model answer

    d=1400 mm=2.5×10−6 md=\frac{1}{400}\,\mathrm{mm}=2.5\times10^{-6}\,\mathrm{m}d=4001​mm=2.5×10−6m. Then sin⁡θ=mλd=6.0×10−7 m2.5×10−6 m=0.24\sin\theta=\frac{m\lambda}{d}=\frac{6.0\times10^{-7}\,\mathrm{m}}{2.5\times10^{-6}\,\mathrm{m}}=0.24sinθ=dmλ​=2.5×10−6m6.0×10−7m​=0.24, so θ≈14∘\theta\approx14^{\circ}θ≈14∘.

    • 1 mark for finding d=2.5×10−6 md=2.5\times10^{-6}\,\mathrm{m}d=2.5×10−6m from the line density
    • 1 mark for using sin⁡θ=mλd\sin\theta=\frac{m\lambda}{d}sinθ=dmλ​ with m=1m=1m=1 to get 0.24
    • 1 mark for obtaining an angle of about 14∘14^{\circ}14∘

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

In the equation dsin⁡θ=mλd\sin\theta=m\lambdadsinθ=mλ, identify what mmm represents.
Show answer and explanation

Answer: D · Worked explanation

The whole number mmm counts bright fringes outward from the center, so m=0m=0m=0 is the central fringe and m=1m=1m=1 is the first fringe on either side. The distance from the slits to the screen is a different quantity, LLL, which appears in the small-angle form of the equation instead.
4.

Medium·Calculate[2 marks]

Light of wavelength 650 nm passes through two slits 0.25 mm apart. Calculate the distance from the center to the first bright fringe on a screen 1.2 m away.
Show answer and explanation

Answer: B · Worked explanation

Use x≈mλLd=(1)(6.5×10−7 m)(1.2 m)2.5×10−4 m=3.1×10−3 mx\approx\frac{m\lambda L}{d}=\frac{(1)(6.5\times10^{-7}\,\mathrm{m})(1.2\,\mathrm{m})}{2.5\times10^{-4}\,\mathrm{m}}=3.1\times10^{-3}\,\mathrm{m}x≈dmλL​=2.5×10−4m(1)(6.5×10−7m)(1.2m)​=3.1×10−3m. The value 6.2 mm6.2\,\mathrm{mm}6.2mm comes from using m=2m=2m=2 instead of m=1m=1m=1, so it is the position of the second bright fringe. The value 1.6 mm1.6\,\mathrm{mm}1.6mm comes from doubling the slit spacing, and 0.31 mm0.31\,\mathrm{mm}0.31mm from a factor-of-ten conversion slip.
5.

Medium·Predict[2 marks]

A double-slit pattern is made with red light. The red source is replaced by a blue source, and nothing else changes. Predict the effect on the fringe spacing.
Show answer and explanation

Answer: D · Worked explanation

Fringe spacing is proportional to wavelength. Blue light has a shorter wavelength than red light, so the fringes sit closer together. Saying the spacing is unchanged ignores the wavelength, which appears in x≈mλLdx\approx\frac{m\lambda L}{d}x≈dmλL​. Blue light still passes through the slits and interferes, so the fringes remain.
6.

Medium·Determine[2 marks]

Neighboring bright fringes are 6.0 mm apart. The slit spacing is doubled, with the same wavelength and screen distance. Determine the new fringe spacing.
Show answer and explanation

Answer: A · Worked explanation

Fringe spacing is proportional to 1d\frac{1}{d}d1​. Doubling ddd halves the spacing, so 6.0 mm2=3.0 mm\frac{6.0\,\mathrm{mm}}{2}=3.0\,\mathrm{mm}26.0mm​=3.0mm. The value 12 mm12\,\mathrm{mm}12mm comes from assuming the spacing grows in proportion to ddd, which reverses the relationship, because ddd sits in the denominator.
7.

Medium·Determine[2 marks]

A diffraction grating has 250 lines per millimeter. Determine the slit spacing ddd.
Show answer and explanation

Answer: C · Worked explanation

The spacing is one line width: d=1250 mm=4.0×10−3 mm=4.0×10−6 md=\frac{1}{250}\,\mathrm{mm}=4.0\times10^{-3}\,\mathrm{mm}=4.0\times10^{-6}\,\mathrm{m}d=2501​mm=4.0×10−3mm=4.0×10−6m. The value 4.0×10−34.0\times10^{-3}4.0×10−3 is the correct number in millimeters, but it was left in that unit and then read as meters, which is a conversion slip. The value 2.5×10−4 m2.5\times10^{-4}\,\mathrm{m}2.5×10−4m comes from multiplying 250 by 10−610^{-6}10−6 instead of inverting the line density.
8.

Hard·Determine[2 marks]

Light of wavelength 600 nm strikes a diffraction grating with slit spacing 2.0×10−6 m2.0\times10^{-6}\,\mathrm{m}2.0×10−6m. Determine the highest order of bright spot that can appear.
Show answer and explanation

Answer: B · Worked explanation

Since sin⁡θ\sin\thetasinθ cannot exceed 1, m≤dλ=2.0×10−6 m6.0×10−7 m≈3.3m\le\frac{d}{\lambda}=\frac{2.0\times10^{-6}\,\mathrm{m}}{6.0\times10^{-7}\,\mathrm{m}}\approx3.3m≤λd​=6.0×10−7m2.0×10−6m​≈3.3, so the highest whole order is 3. Order 4 would need sin⁡θ=1.2\sin\theta=1.2sinθ=1.2, which is impossible. The value 7 is the total number of bright spots, not the highest order.
9.

Hard·Predict[2 marks]

A diffraction grating is replaced by one with more lines per millimeter. The same light is used. Predict the effect on the angle of the first-order bright spot.
Show answer and explanation

Answer: A · Worked explanation

More lines per millimeter means a smaller spacing ddd. From sin⁡θ=λd\sin\theta=\frac{\lambda}{d}sinθ=dλ​ for first order, a smaller ddd gives a larger sin⁡θ\sin\thetasinθ, so the angle grows. The idea that closer slits squeeze the pattern is the tempting error, because ddd is in the denominator and the pattern actually spreads out.
10.

Hard·Determine[2 marks]

Light of wavelengths 450 nm and 600 nm passes through slits 0.30 mm apart onto a screen 2.0 m away. Determine the distance between the first-order bright fringes of the two colors.
Show answer and explanation

Answer: C · Worked explanation

Using x≈λLdx\approx\frac{\lambda L}{d}x≈dλL​, the 450 nm fringe is at 3.0 mm3.0\,\mathrm{mm}3.0mm and the 600 nm fringe is at 4.0 mm4.0\,\mathrm{mm}4.0mm. Their separation is the difference, 1.0 mm1.0\,\mathrm{mm}1.0mm. The value 7.0 mm7.0\,\mathrm{mm}7.0mm comes from adding the two positions instead of subtracting them.

Keep going

Next topic14.9 Thin-film interferencePrevious topic14.7 Diffraction

More in Unit 14 · Waves, Sound and Physical Optics

  1. 14.1Wave pulses and wavesNotes · 10 questions
  2. 14.2Periodic wavesNotes · 10 questions
  3. 14.3Boundary behavior and polarizationNotes · 10 questions
  4. 14.4Electromagnetic wavesNotes · 10 questions
  5. 14.5The Doppler effectNotes · 10 questions
  6. 14.6Interference and standing wavesNotes · 10 questions
  7. 14.7DiffractionNotes · 10 questions
  8. 14.8Double slits and diffraction gratingsNotes · 10 questions
  9. 14.9Thin-film interferenceNotes · 10 questions

All AP Physics 2 topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/5 read

  1. 1Two narrow slits create overlapping waves that interfere
  2. 2The path difference at each point decides bright or dark
  3. 3Bright fringes occur at angles set by one equation
  4. 4Changing wavelength or slit spacing shifts the fringes
  5. 5A diffraction grating produces many sharp bright spots
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe